Recently opening an HTML file on my computer makes firefox attempt a search for the entire file name in the search engine online, how to do i correct that?
when opening an HTML file recently my Firefox automatically opens up a yahoo search screen and the file, the entire file name and route for the file is searched for online. I don't even use Yahoo Search i use Google but that doesn't mater have to open the file manually with searching it on on the open screen to read it because it's trying to search for it online instead of reading it from where i clicked on it.
I.E.
file:///F:/Reading/II.html
would try to search
https://us.search.yahoo.com/yhs/search?hspart=aztec&hsimp=yhs-default&type=derr_100_476&p=file%3A%2F%2F%2FF%3A%2FReading%2Fhtml&rnd=737753354¶m1=sid%3D476%3Aaid%3D100%3Aver%3D15005%3Atm%3D264%3Asrc%3Dderr%3Alng%3Den%3Aitype%3Da%3Auip%3D1124173343
I have no idea what the
&rnd=737753354¶m1=sid%3D476%3Aaid%3D100%3Aver%3D15005%3Atm%3D264%3Asrc%3Dderr%3Alng%3Den%3Aitype%3Da%3Auip%3D1124173343
is for but it's never done this before.
Please read this article about restoring bookmarks:
http://kb.mozillazine.org/Lost_bookmarks
As far as your passwords are concerned, I don't think there's anything you can do. But for the future, you can use the following add-ons to avoid any future loss:
https://addons.mozilla.org/en-US/firefox/addon/2848/
or
http://www.xmarks.com/
Both are good.
And a simple way to import your bookmarks (since you already saved it on your desktop as html) is:
Bookmarks / Organized Bookmarks / Import and Export
Good luck.
Similar Messages
-
I am trying to clear files from my computer. I have a bunch of .m4v protected files that will not delete. They are lectures from college that I do not need anymore and would like to delete them to make room on my computer. I have looked at the help sites and they seem to give directions to change files that people are saving in the future and not regarding past files. I am unable to change anything about the file including the name, so I can not change these past files from .m4v to something else which is deletable such as .mp4 etc. Any help would be much appreciated!!!!
Well, most of what we can tell you is already stated in the message you are getting. A phone can only sync with one library at a time. You have apparently synced your phone with a different iTunes library in the past, or changes have been made to this library so the phone no longer recognizes it as the library with which it was synced. To know which you will have to provide the information.
If you bought them using the AppleID you use with this phone it may simply be easier to re-download them directly to the phone rather than sync them, though you will want to resolve that issue at some point.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 -
When I open iMovie (09), the app searches for missing iPhoto files. These are files I deleted. I have to close about 30 dialog boxes before I can start using iMovie. How do I make this stop?
So it seems the issue is when iMovie is wanting to creat thumbnails, if I ask it to ignore then it's fine but if not it hangs up searching for the video file.
-
Searching for a good file manager
I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
Do there exist file managers with the following features?
Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
-independent of any desktop (gnome or KDE), just a standalone program
-preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
-ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
-detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
-a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
-ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
-ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
-ability to do "open terminal here" or type terminal commands in the current open directory
-must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
-and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
-multiple tabs is a huge plus
-favorites (to local folder paths) is also a huge plus
-preview of files when hovering the mouse over them is nice
-must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
-in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
-no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
1. move /opt to /opt.kde4
2. make a new /opt
3. download several KDE 3 packages from the KDEmod3 repositories manually
4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
5. try /opt/kde/bin/konqueror
6. read reams of error messages about missing libraries, segfaults, etc.
7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
8. goto 5
Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
Some features I "need" in a file manager, besides the ones you mentioned:
- Konqueror's tree view (where you can expand folder branches in the file list)
- Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
- Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
- Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there. -
How Can I stop Elements 7 from searching for a memory file?
Recently, every time I turn on Elements 7 it starts searching for a missing file each time it encounters a photo with a "?" in the corner. I must have pressed a key somewhere to start this function but now I can't get it to stop. I can only continue to another photo if I press cancel while it is searching but I have to do this for each "?" marked picture. Is there any way of cancelling this feature? Thanks in anticipation.
Two solutions:
1. Uncheck the option Edit > Preferences > Files > Automatically Search For And Reconnect Missing Files.
2. Either reconnect the missing files or delete them from the catalog, using the File > Reconnect > All Missing command. See this FAQ for tips on how to use the command:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Quickly_reconnecting_large
Leaving missing files in your catalog doesn't have any benefit. -
Search for "A word or phrase in the file" in .trc files gives no result
Hi
When i Search through Explorer using search for "A word or phrase in the file" in .trc files I get no result.
Probably because these files are of type "Microsoft Network Monitor Document".
But I can open them using Notepad, so why can't I search for a word in these files?
I there another way to search?
Normally I ofcourse use Visual Admin. but there are a lot of trace files so it would be nice to do this kind of search
br PeterHi Peter,
This is a known problem, see http://support.microsoft.com/kb/309173
An alternative is to use other tools which search even faster than the slow MS search does.
Hope it helps
Detlev -
There is not enough free memory to load the entire file
I saw an older reference to this error in a previous post which apparently got resolved, but didn't explain precisely how it got resolved:
Michael Kitzmiller, "There is not enough free memory to load the entire file" #, 27 Jul 2007 5:23 am
I presume that one answer is to rebuild the document from scratch, changing imported images to referenced images. But I want to recover the file as I put hours of work into it and expected that anything I can save that I also should be able to read back in. I will certainly change to referenced images, but I have to be able to open it first.
thank youWeb...
Here is a smattering of ideas.
Do you have ample unused HDD space? If not, defrag it, although in myu experience, this hardly makes a difference. Check your TEMP/TMP folders and clean them out. Consider downloading cCleaner and running it. Do everything you can to make ample room on your HDD and in places like your TEMP folders. If your HDD is congested, temporarily remove big but relatively unimportant applications and move data elsewhere for a while.
Even with 4GB of RAM, Frame can only use somewhere between 2.7 - 3.2 GB of it under the very best of conditions, and that includes the application as well as the files. Unpacking image files can consume considerably more space than it takes to store them. For example, a 1024 x 768 color image requires more than 3.1MB to describe it as a 32-bit color image, yet when stored in JPEG format, it can be as small as 50kB, a compression of 65:1. Of course, it's not reasonable to assume that your document is comprised entirely of such highly-compressed images, but in the unachievable extreme, it would take 980MB to simultaneously open 15MB worth of those kind of files. The point here is to not fall into the trap of thinking a 15MB file comprising a lot of images needs little more than 15MB of RAM.
Make sure ALL other applications are closed when trying to open your file...Outlook, IE or FireFox, Anti-Virus and Spyware apps, Word, etc.
Consider sending a copy of the file to someone else to see if they can open it for you and delete some of the images before resaving it. If you have a backup copy, rename your current file and restore the backup. Maybe your working copy is corrupt. Who knows? Anything is probably worth trying as long as you have a save copy stored somewhere.
Dennis... -
How do i set it to fit to screen to print the entire file?
How do i set it to fit to screen to print the entire file? I have a file that is smaller than 8.5x11 but it says it's larger and clipping will occur and when I print it, it does not fit the paper. Ive even clicked the box that says Scale to Fit Paper Size and it's still giving me that message and cutting info off.
I also need to be able to size it by percentage so I can adjust it to fit into a pre made form Im working with.First, I am new to this forum and I was told by Adobe that I would get help from Adobe as well as other users here, so that's why I posted. But nobody asked me for basic info about image dimensions and printing sizes. I never claimed to be an expert, just a basic user of PS, which is why Im asking for help. I've used this program for my basic needs which is probably 1/1000th of what PS is capable of, but it's what I've used and I've always had success doing what I needed to do with it. If you can help, I very much appreciate it but if you just want to slam me and say you don't believe what I say, then that's not really helpful. Since nobody else responded to this post with any offers for help, the info you seek is below. If you have any thoughts on how to help, I greatly appreciate it.
Im not sure how the image dimensions apply to my question at all but here they are: 3300x2550 with a 300 dpi resolution.
Im simply trying to get the program to allow me to fit the image to the paper Im printing and adjust it as necessary to make it fit a partially pre-printed form I need for work and in every PS version I've used that I can recall, it allowed that. It certainly allowed it, using the same printers Im using now, in CS5.
Also, you mentioned that the printer driver handles this but I can do this in every other program I have on this computer with the same printers, from Numbers (it's a Mac) to Preview to Mac Mail so why wouldn't it do the same thing in PS? That's what Im trying to find out here and with most software, I can pick up a phone or get on a one-on-one chat and get help, but apparently not with PS and since it's not a cheap program, I expected more. I never needed to call for help before using this new version, so that's something I need to consider.
Again, if you are able to help, I appreciate it. Thanks! -
CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.
Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again. -
How do i show the filename.type instead of the entire file path?
How do i show the filename.type instead of the entire file path?
I want it to show "ProgramSetup.exe" instead of "C:/Program Files/Oracle/JavaFX/ProgramSetup.exe"
I have created a JavaFX program with the help of my manager
below are the code
File file = fileChooser.showOpenDialog(Admin.mainStage);
if (file != null) {
textFiles.setText(file.getAbsolutePath());
String absolutePath = file.getAbsolutePath();
//String fileName = new File(absolutePath).getName();the reason i put the last line as // because it has error on that line....
if i remove the last line, it will display but with the full path....
i search through google and the guide on many forums aren't clear to me.....some said there are 2 ways but i tried and it is not working, atleast for me...maybe i left out something or what....can anyone help me on this?You don’t need the absolutePath:
File file = fileChooser.showOpenDialog(Admin.mainStage);
if (file != null) {
textFiles.setText(file.getName());
} -
Updating large pdf file on multi devices but do I have to download the entire file every time?
So I have a pdf file that is 500mb (already on acrobat.com cloud) and I want to read this across tablet, desktop, and phone. I will be updating this file bit by bit on every one of those devices. Does this mean that every time I want to see the updated version I have to wait for a download of 500mb? Because that is just ridiculous!
Hi salmanf76008405
Yes, You would need to download the entire file, in order to see the updated version.
Regards,
Rahul -
I love the new Lady Antebellum song "Dancing away with my heart." Purchased it, would not download. So, I purchased the entire album "We Own The Night, just to get this song.....It downloaded all the songs except "Dancing away with my heart!" Error message pops up everytime I attempt to download the song again "Error - file may be corrupted." It is listed on my IPOD and in my list of purchased music, my account was debited, yet the songs are not there. HELP!
Delete the contents of the <Media Folder>\Download folder
Use Edit > Preferences > Advanced > Reset cache
Delete the current entry from your library
Download it again from your purchased history
tt2 -
I cant get the program to stop searching for a missing file
i cant get the program to stop searching for a missing file
You can uncheck the option that says automatically search for missing files in the prefernces window of Organizer.
-
Color on the entire file name.
In previous versions of the OS, I was able to highlight and color the entire file name. Mavericks' small dot of color on flags gets lost. Is there a way to color the entire file name?
There have been a ton of complaints on this issue and to date there isn't a fix for it. All of us would like to have the colored folders back. We all hope they will bring back the colored folders.
Cheers
Don -
I can't downlaod my purchased music to my iPad.I tried using the computer and it said all purchases for this account have been downlaoded.The musics are on my music folder on the iPad but they are not playing.It's showing download error.Tap to retry on the download section of iTunes on the iPad.I just change from iPad2 to iPad 4G and I started having this problem..Help me out.
Try here > Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
How can I delete the emails in the recovered folder
I have a problem with recovered emails> The folder has 5579 messages of 36mb ( of only 2 messages ) Repeated This is causing my startup disc to indicate that the memory is to full! I wish to know how to delete the recovered folder?
-
Why does iTunes quit unexpectedly when I try to play music
This happened after I recently plugged in my iPhone 4 and was waiting for an upgrade to instal. Now I can't get iTunes to play music. It just quits each time.
-
USB2DVI adaptor window refresh problem
Good evening together, I am experiencing strange issue with the Lenovo USB2DVI adaptor connected to a 24" Lenovo monitor. The screen is recognised without problems and displays the running programs without problems. There are 2 so far identified exce
-
Why not let the song listed in their title in their native language?
iTunes Music Store finally come to Hong Kong, it is a long waiting. After I walk arround in the Music Store, I discovery that most of the Chinese song is listed in Romanization but not in Chinese. Therefore, many of our well know song are all become
-
I have to do a Force Quit every time now. Anybody help please