Recently restored iPod 5G 32G by iTunes

Worked until I got finished with new set up. It crashed when it asked me to redownload all of my games. Now it won't get out of recovery mode. Should I go to the Genius bar or try to restore it again?

Try placing the iPod in DFU mode and then restore via iTues.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try on another computer
Then time for the Apple store.

Similar Messages

  • I want to restore ipod (1st Clickwheel) but itunes says im not online

    I want to restore ipod (1st Clickwheel) but itunes says im not online so it does not let me do it, any suggestions..?

    that helped alot thanks, but i still got a problem. After i restore the ipod and then charge it and connect it to my computer than the same message keeps coming up every time. it says that my ipod is currupted and i need to restore it so i do but it happens every single time. i must have restored my ipod ten times already, any suggestions...?

  • How to restore ipod without updating to itunes 7.0

    How can I restore ipod that uses itunes 6.05. I do not want to update to itunes 7.0 since I tried that recently with disasterous results.I want to stay in 6.05 and start over with my ipod.
    Compaq   Windows XP Pro  

    Do you have the previous updater on your computer? Check in start/all programs/iPod/iPod updater.
    If not, look here.
    http://www.versiontracker.com/dyn/moreinfo/win/26925

  • I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

    I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

    Put the files back where iTunes expects them to be.

  • Restored ipod not updating entire itunes music library

    after restoring ipod to factory conditions, the ipod does not "update" all the music in my itunes music library. instead, both the ipod and itunes freeze. what needs to be done to complete an update?
    mac ibook   Mac OS X (10.4.7)  

    Typo correction on my topic post: I realized the only music I could see in my library was what was updated off of my new laptop.

  • Is it possible to restore iPod without plugging into iTunes?

    Hello - having great difficulty doing anything to my iPod through iTunes. Is there anyway in which I can restore my iPod without going through iTunes?
    (iTunes already re-installed)
    Thanks

    I can't imagine there being any way, unless you use some 3rd party software (which I don't recommend)

  • "Restoring iPod software" freeze on iTunes?

    When restoring iPod software on iTunes, on my 4th gen iPod, it goes all smoothly until the progressesion bar (at the top) appears to freeze near the end. No amount of time solves it. Any idea why this is?
    Screenshot of iTunes
    Screenshot of iPod Touch, frozen with the bar just past half-way.

    Hang during restore process
    Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
    There are two ways to resolve this:
    You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
    For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
    Go to Edit > Find.
    Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
    Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
    Delete the "TcpWindowSize" entry.
    Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
    Close Regedit, restart the PC, and test.
    If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
    If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.

  • Brand new Ipod touch bought yesterday - Screen is frozen with an itunes emblem and cable. Unable to refresh or restore ipod. Computer and itunes does not recognize ipod.

    This is first Ipod for me  - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?

    Before you can use the iPod you have to activate it by connecting it to a computer with iTunes.  Try the following to get your computer to see the iPod so you can activate the iPod.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • The song that shows playing my ipod is not what is selected.  Restore ipod or is it itunes?

    How do I restore my ipod.  The song that shows is playing is not playing.  Or is that iTunes?

    Hey slelli,
    Thanks for the question. If I understand correctly, you want to restore the iPod. I would recommend that you read this article, it may be able to help the issue.
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • Tried restoring iPod, never finished, now iTunes doesn't recognize iPod

    i tried to restore my iPod, but then my computer froze midway. Now when i try to plug the iPod into my computer, my iTunes doesn't recognize it and whenever i try to use the updater, it just keeps saying 'Ipod Service Error'. Now i can't put my songs into my iPod and the battery icon/'Do Not Disconnect' logo is stuck in this really traditional fashion, not like the normal font/picture. Does anybody know what i can do?
    iPod Nano Windows XP

    Welcome to Apple Discussions!
    This link addresses that error...
    iPod shows up in Windows but not in iTunes
    btabz

  • How to restore ipod touch without using itunes

    Did a software update for my ipod touch and now my ipod is stuck on the connect to itunes screen and itunes and my computer don't recognze the device. I can get it into recovery mode and see it under devices on my computer but it won't install the drivers that are needed for the ipod. I have done every possible step in the troubleshooting guides. I keep getting the same error message saying that the device driver software was not successfully installed. itunes won't recognize the ipod, under my computer does not dispaly ipod as connected, I can view that it is in recovery mode under the devices and printers but the drivers will not install by following the steps on apple support. Any advice will be much appreciated. Please don't just give me a link to some support section on apple because I have tried them all. I am using windows 7 professional and have updated to the latest version of itunes.

    Sounds like you might want to take a look at this article: http://support.apple.com/kb/TS1538
    It has a lot of steps that can help you deal with why your device isn't showing up within iTunes, but does show in recovery mode.

  • I have two apple ID's on my laptop, one is mine and one is my roomates, I recently restored my ipod and now when I try to sync to itunes it says sync will complete ones a song is available, what do I do?

    I have two apple ID's on my laptop, one is mine and one is my roommate, I recently restored my iPod and now when I try to sync to iTunes it says sync will complete ones a song is available, what do I do?

    Try syncing songs one at a time to see if there is a problem song(s).
    Do the songs play in iTunes on the computer?

  • How to fix my ipod i recently restored it and now it say connect to itunes

    i recently restored my ipod and now it says connect to itunes

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software

  • Hi...My IPod touch was recently stolen. I have an Itunes account..can I retreive the serial number of my IPod Touch from my Itunes account? If, so...how may I do this. If I have the serial number, the local police can check the serial numbers at pawn shop

    Hi...My Ipod Touch was recently stolen. In order to help the local police deptartment I need to supply a seria number for the Ipod. Of course, I did not wrtie down the serial number, but I have used he device on my Itunes account. My question: Is there a way to retreive the serial nuber of my Ipod touch from my Itunes account? Thanks you all....

    Yes. See bold below
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Restore iPod tunes to iTunes

    Hi,
    My computer recently had a virus which required me to reformat my unbacked up computer. As such, all my tunes (both iTunes purchased and CD sourced) are only on my iPod. While the iTunes purchased songs are already restored, am I able to restore the other music back to my newly formatted computer? I have copied the files from the iPod to the hard disk, opened iTunes, and double clicked each file to then have it brought up in iTunes. However, this just results in the song having an apostrophe next to it and the comment that the 'original file could not be found'. Can anyone please help me with this?
    Thanks.

    *am I able to restore the other music back to my newly formatted computer*
    There are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

Maybe you are looking for

  • Touch gestures no longer working with newest Yosemite version

    Ever since I did the newest Yosemite update a few weeks ago on my 13" early 2011 Macbook Pro the multi-touch gestures such as two finger swipes no longer work. I have been patiently waiting for a new update to fix this but I'm getting impatient.

  • Standard or Custom workflow

    Guys & Gals, How would you find out if a given workflow is a standard or custom workflow. Thanks for advice in advance. Warm Regards Raaj

  • Select a fixed number of random rows

    Hi, I just would like to select a fixed number of random rows from a table. That is, I would like to get 5 rows, without specifying the row_id, and the selected rows should "always" be different. Just as picking 5 balls out of a big box (which is fil

  • Missing IN or OUT parameter at index:: 1 ? What is this?

    Hi. Do any of you have encountered this problem? I have read through some of the thread here, and the most I could find was, its a bug on the previous JDeveloper version (I'm using version 10.1.3.2.0.4066). I read that there is a patch for this? Wher

  • How to Integrate BI 7.0 ABAP preview version into Netweaver 7.1

    Hi all, I have successful installed both BI 7.0 ABAP version and NetWeaver 7.1 & JAVA 7.1 ; version in a single system.both are working fine, but still I am unable to  Integrate BI system in to NetWeaver  7.1.How I see Web application reports in Port