Recently updated to mountain lion ,2nd printer I was using will not print

I recently downloaded Mountain Lion.  A 2nd printer I was using (sharing) will not print now.  Any suggestions, appearently there are a lot of things that we have to redo after this?  Was not aware of this before .  We had to reset our mail, etc.  Any one else with these kinds of problems?
Thank you for any help
Sandie P

karengjbs,
Some Arris routers do not support Multicast, or Bonjour, the service that AirPrint uses. Verify both devices are still attached to your wireless network and Bluetooth is off on your iPhone.  You may also want to power your printer and router off, then power the router on fully, then the printer.
If you need any assistance with the above steps or verify that the router does or does not support the necessary service, please advise.
*I work for HP*

Similar Messages

  • We used to get a 'whooshing' noise when we sent an eMail using mac Mail. This no longer happens. We recently updated to Mountain Lion 10.8.1  Can anyone throw light  on this please?    David

    We used to get a 'whooshing' noise when we sent an eMail using mac Mail. This no longer happens. We recently updated to Mountain Lion 10.8.1  Can anyone throw light  on this please?    David

    Hi
    I am sorry to see you are having problems with your BT Service
    I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • After recent update to Mountain Lion, trash won't empty completely; says "item" inuse

    After recent update to Mountain Lion, trash will not empty completely.  Always an item left in trash, and I get message that the "item is in use." Right now, using app Trash it! to get rid of that left behind item.

    Try rebuilding Trash and see if that sorts it...
    Launch Terminal and copy & paste these commands:
    Go to /Applications /Utilities/Terminal and launch it.
    At the prompt, copy and paste this command
    sudo rm -rf ~/.Trash
    Press Return.
    You will be asked to enter your admin password. It will be invisible.
    Enter it and press Return.
    Log out and back in or restart.
    Let us know.

  • I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes

    I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes.

    You updated you're phone to 7.0.6? Thats impossible since you can only update to the newest OS version Apple released which is currently 7.1.1. Unless you updated before April 22 and just now posting you're question.

  • My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.

    My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.  I just get an error message when I go to the  HP Eprint centre.  It does print the cover e-mail but nothing else.  The attachment is not secure as far as I can see.  I have tried sending an attachment from my Mac and that worked fine.
    This question was solved.
    View Solution.

    Hello krnkln3.
    Are you trying to send the PDF as an attachment in an e-mail sent to the ePrint e-mail address of the printer or are you trying to print using the ePrint app?
    Try sending the same PDF document to the printer's ePrint e-mail address and let us know if that works. If this works but using the ePrint app is not working, maybe the ePrint app is not working fine with this PDF document (it could be due to it's size or something else). Remember that you can always use the e-mail ePrint address of the printer to send PDF documents as the processing is happening at the HP servers and not in your iPad as when you try to send it using the ePrint app.
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • LaserJet Pro Scans, prints test page but will not print from a file

    I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

    Welcome to the HP Forums JBottensek,
    I see by your post that the printer won't print a PDF document from the one computer.
    I can help you with this issue.
    I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I'm trying to get my new airport extreme to print wirelessly to my samsung clx usb printer and not having any luck.  I downloaded the bonjour print wizard and I know there's a signal going to the printer, but it still will not print?  Any ideas?

    I'm trying to wirelessly print to my samsung printer.  I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print.  Anyone have any ideas?

    You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.

  • I recently updated to Mac OS 10.6.5 so Firefox will not quit (unless forced to quit), and I get the following error message. "The application Firefox.app can't be opened -600." Same problem with Safari, Google Earth, I-Tunes, and Adobe Acrobat Reader.

    I have to actually force quit these applications for this to work. How do I fix this. I also upgraded to Firefox 3.6.13.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • White screen and freeze when trying to restart after downloading Mountain Lion 8.2 upgrade. Mac will not shutdown or restart without freezing on whitescreen.

    Downloaded Mountain Lion update 10.8.2 last night. All went well until the message after the download – restart your mac to install this update. The screen went white and the machine didn’t restart. After waiting for quite a while, I shutdown using the main power button. Restarted iMac later and it opened in 10.8.1 and the iTunes icon informed me that I had an upgrade to 10.8.2 that required me to restart the machine to install the upgrade. I did this and again, the screen went white and froze when trying to restart. Rebooted thinking I might be OK to run in 10.8.1 and ignoring the update but when I tried this the Mac worked fine but when I came to shut down I got the white screen freeze thing again. Does anyone have any easy-to-follow solutions for this or will I have to shut down using the main power button every day?
    Many thanks for any suggestions.

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • After upgrading to Mountain Lion, my LaCie USB 3 drive will not mount

    I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?

    mrfredmor_65 wrote:
    I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
    It's my understanding that LaCie hasn't released a Mountain Lion driver for their PCIe card yet. Sonnet uses a modified version of the LaCie driver and theirs is dead in the water too for that reason-they also warn that their driver won't work with 10.7.5 when it's released.
    Indeed, yesterday I pulled the Sonnet USB 3.0 card from my Mac Pro and replaced it with a CalDigit card from OWC; CalDigit has separate drivers for 10.6, 10.7 and 10.8 and I can say that the card works with all three, the first time in 1.5 years that I've had a reliable USB 3.0 connection.

  • HT5022 What works with Mountain Lion?  AirPort Utility 5.6 will not install on Mountain Lion.

    What gives?  The AirPort Utility 5.6 wil not load on a computer running Mountain Lion.  Attempted both on an iMac and Macbook.

    That is correct, the 5.6 version of the AirPort Utility will not install under Mountain Lion ... but it will run on it once installed. One option is to use a utility, like Pacifist, to extract and "install" the utility into the Utilities folder.

  • Since my upgrade to mountain lion now my Italian language CDroms will not run, the message says PowerPC applications no longer supported.

    So am I just screwed?

    Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Re: My printer is offline and will not print, How do I fix this?

    I have a deskjet printer model 4260. I recently replaced one of the inkcartridges, prior to that the printer worked.
    Now I can not get the printer on line, no matter what I do. I am able to print a test page with all colors working.
    I am running windows 7.  I believe I have tried everything, like plug and play, to shutting the system down and
    bringing it back on line.
    The router I am using is Linksys it is hard wired
    John

    Hello there! Welcome to the forums John, aka @4603
    I read about how your Deskjet D4260 is showing that it's "Offline", and I would like to offer you a suggestion that should get you back online!
    Click this link and try these steps: 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7
    Best wishes to you, let me know how the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • 1505n printer wired to network will not print configurat​ion for IP address

    I have a HP 1505n printer that will not the configuration page so that I can get the IP address to set it up. I know it's not the cat5e cable because I've tested it by plugging my laptop to and it works fine.  The operating system is Windows 2008r2. I currently have 2 other 1505n printers which work great using a HP universal driver. Cat5e cable unplugged it will print and UBS cable connected to a PC it will print a usb config page. I followed HP's advice on resetting the printer but get the same results. Any suggestions? 

    Hi Marcel17,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this by clicking the following link: Printers - LaserJet.
    Hope this helps, have a good one!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Printer connected via WiFi, will not print.

    I have a MacBook Pro (2008) running Yosemite 10.10.1 and it is connected wirelessly to my Canon MP530 printer (using a print server). Everything is connected correctly, but when I send a file to print, nothing happens. I am pretty sure I have the correct driver installed because this identical setup works on my other Mac (2009) also running Yosemite 10.10.1.
    The only thing I can remotely think of is that on the Mac that won't print, it is an older Mac (2008) running Yosemite. On the Mac that wireless printing works on, it is a newer model (2009) also running Yosemite. I suspect it may be a hardware problem, but not sure.
    (and yes, I have also tried the Gutenprint drivers, with no result). I can print from the 2008 Mac using the 2009 Mac as a server, but that's it. I just want to be able to print from the 2009 Mac without connecting it directly to the printer or using the 2009 Mac as a "server". Why does one Mac print wirelessly while the other one will not?
    Any suggestions?

    (1) Mac that prints directly (wireless):
    PS-736C74-U1:
      Status:    Idle
      Print Server:    Local
      Driver Version:    11.7.0.0
      Default:    Yes
      System Printer Sharing:    Yes
      Shared:    Yes
      URI:    dnssd://PS-736C74-U1._printer._tcp.local.
      PPD:    Canon MP530
      PPD File Version:    11.7.0.0
      PostScript Version:    (3010.000) 705
      CUPS Version:    2.0.0 (cups-408)
      Scanning support:    No
      Printer Commands:    PrintSelfTestPage
      CUPS filters:
    Raster2CanonIJ:
      Path:    /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
      Permissions:    rwxr-xr-x
      Version:    11.7.0
    Command2CanonIJ:
      Path:    /Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacOS /Command2CanonIJ
      Permissions:    rwxr-xr-x
      Version:    11.7.0
      Fax support:    No
      Printer utility:    /Library/Printers/Canon/BJPrinter/Utilities/CanonIJPrinterUtility.app
      Printer utility version:    11.7.0
      PDEs:
    CanonIJPDE.bundle:
      Sandbox compliant:    Yes
    (2) Mac that does not print directly, but prints via Mac 1 (wireless):
    PS-736C74-U1 @ Wilda Duncan’s MacBook Pro:
      Status:    Idle
      Print Server:    Remote
      Default:    Yes
      URI:    dnssd://PS-736C74-U1%20%40%20Wilda%20Duncan%E2%80%99s%20MacBook%20Pro._ipps._tc p.local./printers/PS_736C74_U1?uuid=f0407db8-e96e-3ed2-77c1-2c7544c42120
      PPD:    Canon MP530

Maybe you are looking for