Recently upgraded to windows XP from NT and get the error "can not load control"

I am using a LabVIEW VI to run two Opteon digital cameras. Originally, they were run off a Windows NT machine, however it ran out of hard drive space and we had to upgrade to a Windows XP machine. I installed all the new drivers from Opteon, however when I run the VI on the new system it does not load the image viewer or scroll bars and I recieve the error "could not load control". The control for the view screen is "MVCamView" and the control for the scrollbars is "MSForms.IScrollbar". The drivers sent to me by Opteon work fine, as the free program that Opteon sent has no problems.

Hi, Tsumma33
Thank you for the question.  Try uninstalling all components of iTunes in the order specified of the article below.  Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
You may need to process the steps in the article below for each component when uninstalling iTunes if the issue persists.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Similar Messages

  • I tried to reinstall iCal from Disk and get an error

    I deleted info.plist from my iCal package. I had read somewhere that if I deleted that all old files in my iCal would be deleted. But instead what happened is I get an error when I try to start "2008-05-19 15:29:46.693 iCal[9051:10b] No Info.plist file in application bundle or no NSPrincipalClass in the Info.plist file, exiting logout" So then I tried to reinstall iCal from Disk and get the error "The Installer could not validate the contents of the 'iCal' package. Contact the software manufacturer for assistance"

    lizesc,
    Welcome back to Apple Discussions.
    I deleted info.plist from my iCal package.
    Just for the edification of other users, you should never alter any files inside of an application package.
    Drag your current copy of iCal to the trash, and then follow these steps to reinstall iCal:
    1. Insert your Leopard Installation disk into the computer.
    2. The disk will appear on your desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the OS X 10.5.2 Combo Update.
    ;~)

  • We have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are t

    we have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are too small to view

    A larger monito is only helpful if the resolution is the same as your current monitor, and they tend to have higher resolutions as you get larger, so don't rush out an buy a larger monitor and expect miracles. If you have a 22" now and it's "HD" (1920 x 1080), you'll see some change as you go up in size, but you'd probably need at least a 27" screen at 1920 x 1080 to notice a real difference.
    Right click on the desktop and choose Screen Resolution and you can see the current settings (probably the maximum value which is recommended) and other settings you can use. Lowering the resolution will make everything on the screen larger, but less stuff will fit. Used to be, too that ID did not work will at less than the maximum resolution setting for any monitor.
    I did not mean to use the larger fonts feature, by the way, as far as I know that doesn't affect the ID user interface.
    The point I was making, rather badly, is that those of us with declining eyesight are getting shafted because there is no way to make use of all the monitor potential and adjut the user interface to make things visible. I just bought a 30" monitor to replace my old 27" which had 1920 x 1200 resolution and was pretty usable, things were about the same size as my old sony 20" running at 1600 x 1200, but even though it is larger in terms of screen size, the new monitor is even higher resolution and things are actually smaller. The only reason I can use it with ID is I know where everything is.

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • TS1717 I get the error "unable to load data class info from sync services" and eventually itunes freezes-will anything in this article help?

    I get the error "unable to load data class info from sync services" and eventully itunes freezes.  will this article help me?

    Hello there brigidfromca.
    Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
    Thanks for using Apple Support Communities to reach out to us for answers.
    Cheers,
    Pedro D.

  • Upgraded to Mavericks and get the following: could not Initialise Photoshop  because of a program error

    Upgraded to Mavericks and get the following: could not Initialise Photoshop  because of a program error
    I have tried all the fix(es) on the web i can find i.e. Trash the Prefs, shift when open and stop plug ins, Download upgraded Java, deleted and re-installed
    My business is at a halt cannot find a fix from Apple

    Did you run the cleaner after uninstalling and before reinstalling?
    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    AND JUST FOR MAC USERS - Some 10.9.x links
    next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I can not download the Golf digest magazine purchased from the i-tunes store, when i attempt i get the message "can not install item, restart app and down load" i have tried that without success. This started after i changed ipads

    I can  not access my Golf digest down loads from the newstand, when i try to down load purchased items i get the message "can not install item, please restart the app and down load" that piece of advice has not helped, any one else encountered this?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

    Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

    The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod.  The iCloud backup and restore took a long time, but worked.  I was very grateful.
    Trying again to backup to iTunes locally proved to be the same challenging problem.  The same backup to corrupt file was the message.  The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error. 
    When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy.  Any restore would need to be from the iCloud which already worked but isn't the final solution.
    Your suggestions were good, I am just in the same boat.  Any thoughts about doing the following?
    1) creating a cloud backup
    2) resetting the iPod to factory defaults
    3) removing all traces of iTunes from my computer and
    4) installing iTunes and setting up iPod from scratch.
    This is the next thing on my list.

  • I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

    I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

    Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
    Go to System Preferences a open up the Users pane;
    On the left side of the pane, you shuold see Login Options;
    Enabled editing option clicking on the lock (it will ask your password);
    Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
    Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
    Select Enable Root Account (you can set a password, or not);
    Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
    Theorically, from this account you will be able to unistall the application.
    After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

  • HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

    got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
    I have windows 8

    I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

  • I have purchased a new Mac power book 10.9.2.  I cannot open illustrator CS4 and get the error message 150:30.  Can you help?

    I have purchased a new Mac power book 10.9.2.  I cannot open adobe illustrator CS4 and get the error message 150:30.  Can you help?

    You are welcome, Sharon.
    You should be aware that the newest version, CC, is only available as a subscription.
    CS6 can be purchased at Adobe, or second hand, see below.
    Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade.

  • I am trying to copy a document and I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area."

    I am trying to make duplicate documents with minor adjustments to each and when I try to copy the artwork from one document and paste it into the new document I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area." Both documents are exactly the same size, res, color format etc. I even tried to drag and drop and get the same error message. Anyone know what I can do to resolve this issue?

    Try scaling the view size down to 6% or so and then do a Select All. See if there are objects off the artboard which may be causing this error. Most often you will see this if there were guides dragged from a ruler which were selected by dragging the white arrow and then deleted. This leaves the anchor points at the edge of the work area.

  • HT201407 I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to i

    I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.

    Where exactly did you get this phone?
    Do you have a SIM in the phone?
    There are 2 primary causes for this.
    Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it.

  • Everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.

    Hi guys,
    I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
    Kind regards
    Ian

    One correction, from the icloud I was not able to listed to the entire song.  So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.

Maybe you are looking for