Recents updates on my windows is causing problems for Bonjour

Bonjour print service stopped working after last windows update.  My time capsule not showing up as a data location other than backup.

Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.

Similar Messages

  • Does adding V-Card to signature cause problems for Outlook (Windows) users?

    Hi -
    I want to add a V-Card to my signature in Apple Mail (by drag and drop from address book to signature pane in Mail>Preferences).  I have read that, in the past, this can caused problems for some recipients who use Windows Outlook.
    Is this still the case?  If so, how can I add a V-Card to my signature without causing problems for recipients?
    Thanks -
    Doug

    I take note of your WNLB recommendation but in this case the error start on one of the CAS server first and client connected to the CAS that does not have any errors continue to work as normal.
    I upgraded to SP3 late last year.  This problem first happened in Feb 2014.
    Have you checked the DNS settings on the VM - yes, and both of them are pointing to one of our DC's.
    I would set the client with a Host file to just one CAS to rule out the WNLB - this would be too hard
    to manage as when the issue happens again it could happen on CAS1 but the client could be connected to CAS2 so it wont experience the issue.
     

  • HT204053 I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use.

    I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can we download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use?

    Yes. In the future, however, only you will be able to update Lion because it will now require your Apple ID.

  • [svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

    Revision: 863
    Author: [email protected]
    Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
    Log Message:
    Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
    blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

    Revision: 863
    Author: [email protected]
    Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
    Log Message:
    Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
    blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

  • Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app.  Only thing that shows on iP screen is music library.  Home Sharing is on. Any help appreciated.

    Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update.  Only thing that shows on iPhone screen is music library.  Home Sharing is on. Any help appreciated.  Sorry if this is not exactly the right place to post this!

    One clue: I have found a reliable way to solve the problem when it happens.
    In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet.  The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
    When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
    If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
    Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing.  Remember, internet access (Trailers, Store, Netflix) have no issues.  Purely Home Sharing.
    Adam

  • HT4972 I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to

    I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to open.

    I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program  - neither indicated a newer version of itunes is available. (it is a vista computer).
    The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
    The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system.

  • 4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

    4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
    Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
    Myself an engineer for projects
    Looks the company apple cannot grow if they do not support solving the problems of their existing customers
    Ashok Dhingra
    India

    You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
    What troubleshooting steps have you tried.

  • Does any one know about the small Hardrive that "The Power Company" is producing, sponsored by Indiegogo, for small Apple mobile devices (iPhones, iPods, etc,).  Do they work or cause problems for the device or iCloud storage?

    Does any one about the small hard drive that "the Power Company" is bringing out as a crowdsourced project by Indiegogo?  Does it work, does it cause problems for IOS, iPOD Touch or iCloud?

    I have not heard that mentioned here before. What does the Indiegogo page say?

  • After recent updates, Gnome freezes randomly. Video problem?

    I've been having some problems lately that I didn't have before recent updates.
    My desktop will freeze randomly and my only option is to switch to a VT and enter multi-user mode with `systemctl isolate multi-user.service`. X doesn't crash though. My Gnome Desktop just freezes entirely, but the mouse pointer continues to move around just fine. When I enter multi-user mode, Xorg.0.log says that the server exited successfully.
    Below are error messages in dmesg, systemd journal, and Xorg.0.log.
    # dmesg | grep -i error
    [17986.766825] [drm:r100_cs_track_texture_check] *ERROR* Texture of unit 0 needs 245760 bytes but is 139264
    [17986.766827] [drm:r100_cs_track_texture_print] *ERROR* pitch 1280
    [17986.766829] [drm:r100_cs_track_texture_print] *ERROR* use_pitch 1
    [17986.766831] [drm:r100_cs_track_texture_print] *ERROR* width 65
    [17986.766833] [drm:r100_cs_track_texture_print] *ERROR* width_11 2048
    [17986.766834] [drm:r100_cs_track_texture_print] *ERROR* height 48
    [17986.766836] [drm:r100_cs_track_texture_print] *ERROR* height_11 2048
    [17986.766838] [drm:r100_cs_track_texture_print] *ERROR* num levels 0
    [17986.766840] [drm:r100_cs_track_texture_print] *ERROR* depth 0
    [17986.766842] [drm:r100_cs_track_texture_print] *ERROR* bpp 4
    [17986.766844] [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
    [17986.766845] [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
    [17986.766847] [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
    [17986.766849] [drm:r100_cs_track_texture_print] *ERROR* compress format 0
    [17986.766851] [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
    [22547.870582] plugin-containe[20829]: segfault at 7fcf04225a05 ip 00007fcf1487c9d8 sp 00007fcf0c3a1970 error 4
    # journalctl | grep -i error
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* bpp 4
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* compress format 0
    Nov 07 23:22:43 starlancer kernel: [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
    Nov 07 23:41:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:41:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:16 starlancer gnome-session[19143]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Nov 07 23:42:20 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 07 23:42:20 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 07 23:42:20 starlancer NetworkManager[269]: <error> [1352360540.622789] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
    Nov 08 00:19:41 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 08 00:19:41 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 08 00:20:33 starlancer gnome-session[19809]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Nov 08 00:20:36 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 08 00:20:36 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 08 00:20:37 starlancer NetworkManager[269]: <error> [1352362837.36005] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
    # cat /var/log/Xorg.0.log | grep -i -e "(EE)" -e "(WW)"
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22555.361] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22555.364] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22555.366] (WW) Warning, couldn't open module vesa
    [ 22555.366] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 22555.367] (WW) Warning, couldn't open module modesetting
    [ 22555.367] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 22555.367] (WW) Warning, couldn't open module fbdev
    [ 22555.367] (EE) Failed to load module "fbdev" (module does not exist, 0)
    EDIT: My desktop is started by systemd using graphical.target and gdm.service to start the GDM display manager on terminal 1 (TTY1). My Gnome desktop runs in Classic (Fallback) mode with Compiz and compiz-decorator-gtk for effect. I
    Any idea what might be causing these freezes or what info I can further provide?
    EDIT: Processes in X are apparently not crashing, only the video output is. For example, if I'm running applications with sound, I continue hearing sound though the graphics are completely frozen. Is there a way to refresh the graphics or video card somehow?
    Last edited by amadar (2012-12-20 10:59:32)

    bmanuel wrote:
    I think i got my problem, but i don't know how to solve it: after much troubles i found out that whenever i have an SMB connection with a machine that then goes down/disconnect from network without me unmounting the share BEFORE it, then BOOM, everything freeze.
    I noticed this only because i was sharing a directory with my brother and noticed i had the froze as soon as he got disconnected from the network: so i asked him to power on that machine and.. magic! My machine unfroze instantly!
    But now, how to fix that?! Is it due to my /etc/fstab? Does this really matter with nemo/nautilus mounted shares? This, however, depicts the machine in question (the one that, disconnecting from the network, caused my own to freeze)
    //themachine.local/shared /home/username/mountpoint/ cifs noauto,guest,username=myname,password=mypassword,uid=1000,gid=100 0 0
    At last I found out what's my problem, hopefully your situation is similar so that we can work out a solution on this one.
    THANKS! I'm quite sure this is the reason gnome shell freezes for me as well. I was mounting my box.com cloud with this entry in /etc/fstab:
    # box.com account
    https://www.box.com/dav /home/abtz/Box davfs rw,user,noauto 0 0
    If anyone has an idea for how to fix this, I'm all ears. For now, I'll just remove the entry from /etc/fstab.
    I'm running vanilla Gnome, with only the Frippery shutdown menu and battery remaining extensions installed.

  • [SOLVED] wxpython update cause problems for playonlinux

    After a recent update, playonlinux seems to get stuck in an endless loop during startup. The output in terminal is this:
    Looking for python... 3.3.3 - skipped
    Looking for python2.7... 2.7.6 - selected
    Traceback (most recent call last):
    File "mainwindow.py", line 34, in <module>
    import wx, wx.aui
    File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
    from wx._core import *
    File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
    import _core_
    ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
    Looking for python2.7... 2.7.6 - selected
    Traceback (most recent call last):
    File "mainwindow.py", line 34, in <module>
    import wx, wx.aui
    File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
    from wx._core import *
    File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
    import _core_
    ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
    This just keeps repeating until I end the process with Ctrl-c
    The specific update that cause this is:
    wxgtk
    wxpython
    wxgtk2.8
    The wxgtk2.8 package was newly installed as certain packages require this version. Just to make sure, I removed wxgtk2.8, and downgraded wxgtk and wxpython, then playonlinux works without issue. Upgrading the system again causes this issue to appear again.
    Edit: wxgtk upgrades from version 2.8.12.1-5 -> 3.0.0-2, and wxpython upgrades from version 2.8.12.1-4 -> 3.0.0.0-1
    I have narrowed down the problem. Downgrading only wxpython to version 2.8.12.1-4 solves the problem.
    Last edited by Daerandin (2014-01-12 02:32:41)

    I'm on wxpython 3.0.0-2 and I'm still getting this issue, both on wxgtk 2.8.12.1-5 and 3.0.0-2.
    And it might help to know that playonlinux depends on the package "wxgtk2.8" rather than wxgtk (and also wxpython2.8), which I can't install without borking my system and don't want to anyway because I use wxMupen64Plus, so I installed every other dep and -Sdd'd it.
    EDIT: Scratch that, my error is actually similar but not the same:
    Looking for python... 3.3.3 - skipped
    Looking for python2.7... 2.7.6 - selected
    Traceback (most recent call last):
    File "mainwindow.py", line 32, in <module>
    wxversion.select('2.8')
    File "/usr/lib/python2.7/site-packages/wxversion.py", line 152, in select
    raise VersionError("Requested version of wxPython not found")
    wxversion.VersionError: Requested version of wxPython not found
    And it has the exact same output for either version of wxgtk. I'd test it on wxpython2.8, but that depends on wxgtk2.8, which I can't install without either uninstalling important packages like audacity or forcing conflict overwriting. It also loops this error forever until I CTRL+C.
    Last edited by Cadeyrn (2014-02-04 06:29:08)

  • Facetime Camera not working for Google Hangouts due to recent update. Will Apple fix this problem?

    Hi,
    My FaceTime camera no longer works in Google hangouts due to a recent update from Apple. Will Apple fix this bug soon? Unfortunately, I do not have time machine.

    I am having the same problem. Can this be fixed?

  • Firmware Update 1.7 drains battery and causes problems for sound

    I have a Macbook Pro early 2011 with a SSD. After installing Firmware 1.7 I saw the beach ball over and over even after rebooting... this problem got resolved after I plugged in power cable and is now gone even when it is running on battery. But the sound of my MBP goes randomly on/off when I plug in/out my headphones and the worst problem is that prior to the 1.7 I got up to 5 hours of battery but now only 2:30 hours. I've only 470 cycles of my battery. Resseting the SMC didn't help and unfortuaneltly there is no way of downgrading the firmware. What should I do?? This is definietly a firmware problem which supposedly was released to solve a rare battery problem on some machines not to cause problems on others.

    I am seeing this problem as well.
    Before the SMC Update 1.7 the battery was fine. After, it hibernated within a half hour of use on battery. Upon wake-up the Service Battery warning is in the battery menu, and the time remaining calculation has gone from several hours at a full charge to less than 10 minutes.
    My battery is original MacBookPro8,2; I rarely work on battery, relying on it mostly to keep my computer going while asleep during a half hour commute to/from work. System Information's Power tab reports
    Cycle Count:          19
    I plan to try a battery calibration soon; if that fails, then the Apple Store.
    e

  • HW acceleration (direct2d) causes problems for my site , is there a script to disable it automatically?

    direct2d acceleration on FF4 causes really bad font rendering problems for my site.
    Text goes on to of each other and behind pictures making it impossible to read for some parts. Disabling HW acceleration fixes the problem. Is there a script that I could use to disable it automatically for my site?

    In fact updating my graphics was the cause of the problem. With the old drivers there were no problems. It depends on the system. So far I've tested on 6 Windows PC's. on 2 of them it worked fine. My site should be 100% W3C compliant. It works fine on 3.6, Chrome, IE and Opera

  • I purchased Lightroom on my old Macbook but recently updated to a Mac with Retina display for editing my photos. I don't want to purchase Lightroom again and want to keep my catalog I have been using. Is there a way to access it on my new computer?

    I purchased Lightroom on my old Macbook but recently updated to a Mac with Retina display. How do I access Lightroom on my new computer without purchasing it again?

    If you created a new Apple ID, you have to purchase the app again. If you can still use the old ID, then you can download it again for free by using that ID. But you will run the risk of locking yourself out of your new Apple ID for 90 days by downloading the app with your old ID and associating the iPad with the old ID.
    Is the risk of locking yourself out of your new Apple ID worth not having to pay $.99 again for an app?

  • [solved] Some programs cause problems for sound in other programs.

    Today I noticed that audio has stopped working in some applications, but not others. The programs that I know where it doesn't work are:
    Hotline Miami (game)
    VLC
    Dungeons of Dredmor (game)
    Uplink (game)
    Programs where I know it works are:
    mplayer / smplayer (on the same files where vlc does not work)
    mpd
    Programs run through wine
    Standalone flash player and the firefox flash plugin
    Additionally, when I run a program where audio doesn't work, I have to restart programs where it does. For example, I'll pause mpd, open Hotline Miami, and then quit. When I try to unpause mpd, I'll get the error message "Failed to open audio output". But if I try a couple times, it will eventually resume. It's a similar situation for mplayer. I'll have to quit and restart mplayer a couple times after trying one of the other programs before audio will work.
    Further complicating the matter is that there are no error messages for the programs where audio does not work. I can't seem to track down the problem. I also don't do much with sound beyond using mpd and mplayer, so I don't know when this started.
    My hardware is a Lenovo IdeaPad z580 with integrated Intel HDA audio.
    EDIT: I just noticed that the problem is not what I thought. Part of the problem was simply due to volume. So I can get sound in the listed programs. However, running those programs does still cause the problem for the mplayer and mpd where I have to restart them.
    Last edited by mathfreak (2014-03-10 13:27:10)

    Gah. It does appear to have been a pulseaudio thing. I hadn't even realized it was installed, let alone running. I've fixed it. Thanks for the help! And thanks, brebs, for the asoundrc file. I think it'll help a lot.

Maybe you are looking for