Recevier determination error

Hi Experts,
I have created a B2B scenario in which SRM will send XML PO to XI  using PROXY and from there  using HTTP receiver adapter it will sends the cXML PO to the external vendor.I have created the HTTP recevier in integration directory and i have created one receiver determination,interface determination and receiver agreement.I have not created sender agreement since i am using PROXY at sender side.
Now i am testing my configuration using tools-->Test Configuration
I am getting the following error,please guide me in solving this problem with steps.
Sender Agreement
<Not found>
<Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
Receiver Determination
<Not found>
Runtime error
Message is incomplete. No Sender found
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace> <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace> <Trace level="1" type="T"> Cache Content is up to date </Trace> <Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
What could be the reason for this error and how to resolv this issue?Please provide me some inputs.
Thank You

Hi Thank you for the reply.
And i had maintained the backend system in SRM configuration i hope that is the logical system.Apart from that backend system entry in SPRO of SRM i haven't maintained any in XI.Is that the same you are talking about it.OR do i need to maintain a seperate logical system in XI.How?
And my vendor(receiver) url is below.
https://real.qa.officemaxsolutions.com:5443/invoke/OMXBuyer/receive
with this while creating the receiver HTTP adapter in XI i have given the below entries:
Address Type: URL
Target Host: real.qa.officemaxsolutions.com
Port: 5443
path: invoke/OMXBuyer/receive
Are the properties correct?or do i need to change these on adapter creation?
Please help me.
Thank You,

Similar Messages

  • Account determination error in FI doc during SD billing doc posting.

    hi,
    when I create one billing doc ref to s/o,
    I check account determination in condition type:
    G/L account no.: 110000
    Provision acc.   : 120000
    in FI doc,
    should debit 110000 and credit 120000
    but current status is credit 110000 and debit 120000
    Please help.
    Thanks.

    Hi,
    One of the following could be the reasons for the Account determination error.
    Please check.
    1.Incorrect account assignment group entered in the customer and material master
    Resolution:Maintain correct account assignment group in customer and material master,Eg.External Domestic,Z1 - External Foreign,Internal Foreign,etc,.
    2.GL account not extended to the respective company code.
    Resolution:Extend the required GL account to the company code.
    Regards,
    Sophia Xavier

  • Account determination error in Invoice document posting

    Problem - When generating the invoice document to customer, an error is displayed - Document is saved (Account determination error). As a consequence of this step, the invoicing is not able to create FI document
    My Analysis-
    Account determination is done in G/L account assignment (VKOA screen)
    For my billing document, the system is not able to find the GL account (below are screenshots)
    In VKOA screen, I already defined the GL account determination using KOFI procedure.
    I initially defined in table 2 Cust.Grp/Account Key and it didnt work.
    So I defined in both the tables 1 as well - Cust.Grp/MaterialGrp/AcctKey
    But still system is not reading the tables and obtaining the GL account no
    Any advice on why its not working?

    Hi Nikhil,
    As per the screen shots i could observe that you didn't maintained acct asst grp of customer.
    check the acct asst grp of customer field in billing tab is maintained or not.
    other possible reason may be in your pricing procedure -check whether the accounting keys are maintained or not.
    This could solve your issue.

  • Material Determination error during Transaction DP90

    Dear Experts,
    I am configuring the Depot Repair scenario for a Hitech Industry.
    The Process is as follows;
    1. Ceating the  Notification
    2. Creating a repair order using Notificaion. and getting the repaired items in to the plant
    3. Creaing and confirming the service order and delivering the repaired product to the customer.
    4. Creating a Billing Request using service order during transaction DP90.
    I am facing the following error!!! -
    Material Determination error in the service order line item xxxxx/xx!!!!!!
    I have configured the DIP Profile YBR00099 as below.
    The characteristics Activity Number, Activity Type and Cost Elemnt were given the Material Determination Check.
    The source is---- " Actual Costs and Line Items " with 100 Percent, No sets are used for the source characteristics.
    In the Material Determination a Blank Item is used with a Check for the field " Material Direct"
    In the Material Determination Criteria for the Blank Material, it is configured as below;
    Activity Type            No Set Used - No Value used
    Activity NUmber        No Set Used - No Value used
    Cost Element           YBR-Material-01(Set values are 608110 and   * )
    Note : the above configuration was done using the Config guide AS IS.
    The material that was used in the Service order is not maintained in the  ODP1 transaction ---> Material Determination.. instead ,only a blank material is used and configured as above.
    The subsequent Process should continue as follows;
    5. After saving the billing request, two more line items are determined in the repair order.
    6. Debit memo is created using the repair order. where the Actual confirmed hours of service and spare parts confirmed if any are billed for the customer.
    Basically I am very much new to this RRB concept and I was facing the above error and could n't be able to proceed further.
    Please help me in this regard.
    BadariNath .G
    Answerthink India Limited, Hyd
    9989425075

    Material Determination error in the service order line item
    Check note 460415 and 545095
    thanks
    G. Lakshmipathi

  • Account determination error

    hi
    when i a creating a billing document for third patry sales with refernce to sales order
    while saving the doc i am facing error called account determination error
    can i now where i am wrong
    do i have to amitained ant record in VKOA
    if yes what
    Screen shot
    http://www.4shared.com/file/59857963/f56431d5/fico.html
    Regards
    Vini

    The access you are using for maintaining the condition record. The screen shows the first two accesses which means that there is something wrong with that.
    If your acct determination is not carried out then it will say acct. det has not been done . \
    Looks like your condition records and the acct. determination seems to be a problem.
    GO to acct. det. in BAsic functions- revenue acct detemination I think its VKOA and check your account determnation to see if your account keys and accounts have been correctly maintianed.
    Check your pricing procedure to see if all the relevant condition types have been assigned to the account keys.
    check if your condition records have been maintianed in the correct accesses. It will solce your problem.
    regds
    Jude

  • ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

    I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
    I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

    The fact that there is so many discussions with no clear answer is the problem.
    I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

  • Account Determination error while goods receipt

    I am trying to receive a Purchase order thru MIGO transaction. I got an error message saying "Account Determination for entry IPGL FR1 0040 not possible".
    This error message came only when i had "FRB1" condition type in Purchase Order Conditions. Without FRB1 condition type in conditions i am able to receive the Purchase Order thru MIGO.
    IPGL is the chart of accounts in our company.
    What is FR1 in the error message ?
    What is 0040 ?
    What is the connection between condition type FRB1 and Account determination?
    What do i need to do to fix the issue?
    I greatly appreciate any help from you guys.

    Prashanth,
    I would encourage you to search the forum before posting any question (if you have the time, interest etc). It is likely that youu question (or a similar question) would have been answered previously.
    Please search the forum with 'account determination error' for instance. I get 11 hits. You can try searching with other similar terms. Read the hits and then come back if you still have questions.
    I don't intend to be unhelpful but I felt the need to point this out (although most people don't seem to care).
    H Narayan

  • Account determination error for EK02

    Hi,
    I am using EK02 for unit costing in quotation used specially for PS.
    I have assigned EK02 in the quotation doc type and have added the same to the pricing procedure (marked it manual & ststistical) and assigned it SubTotal-B.
    It is working perfectly in the quotation but while in Sales Order it is giving account determination error for EK02.
    I am unable to understand when there is no account key assigned to it, how is this error ?
    Please advise immediately.
    Regards,
    Rajesh

    Check the Requirement class in order - in procurement tab.
    when you use the EK02 cost estimation condition type, Controlling documents get generated once you save the sales order.
    i.e. the reason, in VKOA for the all the access keys maintained in order pricing procedure, should have valid record with Costing conditon type:KOFK.
    maitain entries in table:005- Account key for all the account keys maitained
    such as;
    Application / Condition type-KOFK/ chart of accounts/ Acct key - G/L account ( here maintain same G/L account which have you assigned with Condition type KOFI)
    it will solve your issue.

  • Account determination error at billing level

    Hi,
    for Account determination error at billing level
    i checked the line item level for the material by highlighting the item, then GO TO > ITEM > ITEM DETAILS. here 5 line items are there , 4 line items have same "Acct asgnmt grp" and 1 line item is different at order level. i gess this is the problem if am wrong please correct me.
    thanks
    Edited by: pandu123 on May 26, 2011 2:24 AM
    Edited by: pandu123 on May 26, 2011 2:32 AM

    Hi Pandu
    A/c deterimation error. 1st you check in customer master sales area data billing tab page with account assingment and go to material master u select particular material see in sales organization 2 tab with account assignment. and go to T.Code VKOA check the combination which is assiged A/c assingmnet group of customer and matrial account assingment group. If it is not come goto VFX3 and specify the customer execute and click on RELEASE FLAG. If it is error go to log see the digonsis.
    Kind Regards
    Chandra Mouli A

  • Account Determination Error - Discounts - ERS

    Dear All,
    When I am releasing my Billing Document, I am getting the "Account Determination Error".
    My Requirement: Sales Discounts should not post to ERS Account Key.
    Price          -     PR00 - 10000 ERL GL Account (10000)
    Discount    -     K004 - 10%
                                         900
    Base Price                   9, 100 INR  
    In the Accounting ENtry - it has to show only Customer Account 9100 Dr to Sales Revenue A/c 9100.
    I don't want to show Sales Discount 900 Rs.
    For this in pricing procedure configuration - i have removed ERS Act key (for not posting), becoz of this - I am getting the Account Determination Error.
    Any Idea on How to Configure the above scenario?
    Ganesh Varma G.

    In pricing procedure
    MAINTAIN SUBTOTAL CONDITION AFTER DISCOUNT IN PRICING. MAINTAIN THE DISCOUNT CONDITION AS STATISTICAL.
    MAINTAIN ACCOUNT KEY ERL FOR SUBTOTAL.
    STEP  COND TYPE                FROM             TO         STAT     ACCT KEY
    10       PR00                                                                             -
    20       K004                                                                 X          -
             price after discount      10                  20                        ERL

  • Account determination error for Account key

    Hi Everyone,
    I have maintain one condition manual pricing e.g ZMRG where i m manually putting the margin of sales price
    this condition is only for calculation and i dont want to post it to account. But at the time of bill it is giving me account determination error. In VF02 i check it is showing error due to not assigning the account key for that condition but here i dont want to post that condition to accounts.
    Please suggest me the best possible way.
    Regards
    Shambhu

    Hi,
    You said that the condition is manual.
    Now you saying:
    i maintained the condition for it instead of only text in PP
    Have you got the solution? Then please update.
    Thanks,
    Ravi

  • Account Determination Error:  How to properly cancel the invoice/ cr memo

    Hello SAP Guru's,
    What is the correct procedure in cancelling an invoice with Account Determination errors and subsequent credit memo?  The error is a result of the user entering line items that are not permitted for the order type thus we suspect caused the Account Determination error.  We were however unable to verify or correct that.
    We now want to cancel the invoice and all the subsequent credit memos.  What is the correct procedure in doing so?
    I think we start off by VF03 then select the billing and select Display Document then Cancel?  Is this correct?
    Thank you.

    Hi,
    If you want to block specific line items in the sales order then you could enter a u201Creason for rejectionu201D in those line items and save the sales order. This can be done by going to the tab "Reason for Rejection".
    If you want to stop delivery creation for the entire sales order then you could enter a delivery block in the sales order. Delivery block field can be found on the main "Sales" tab.
    Cheers,
    Shailabh

  • Account determination error during intercompany billing invoice

    Hi experts,
    I am getting 'Account Determination Error' shows in red during 'intercompany' billing.
    I tried to release to accounting but didn't help.
    Pls advise
    Br,
    Umesh

    Hi Sushant,
    The error during the invoice creation. This document is for intercompany billing.
    I checked in Account Determination Analysis --> Revenue Accounts
    When I click on the Item no., it shows as 'No G/L account found in KOFI' & messege 121.
    In VKOA, there are few tables but I am not sure how & what to compare between these two.
    Br,
    Umesh

  • Accounting Determination Error

    Hi,
    I am getting the below error message in VF02.
    "Account determination error".
    Accounting document has not been released yet though SAP billing documentcreated.
    Please let me know where the configuration happens.
    Thanks
    Venkatesh

    Hi Venkatesh,
    We can determine the GL accounts through access sequence.
    Access sequence is nothing but SAP terminology of determing the GL accounts.
    Basically the FI- SD integration is for picking up the revenue accounts or the discounts and surcharges.
    The account key determines whether it is a revenue or a surcharge or discount.
    Actually Goods issue and billing generate account entries.
    Goods issue:
    Cost of goods sold account                          Dr
    Inventary finished goods account                 Cr
    Billing:
    Customer               Dr
    Sales                     Cr
    Please check configuration GL account determinations.at VKOA
    ERL               Sales revenue
    ERS               Sales deductions
    MWS             Sales Tax    etc.....
    and also please check automatic account determination in OBYC. In OBYC need to maintain offsetting entry.
    GBB       -
    >              Inventary stock account
    I hope you are understand.
    Thanks & Regards,
    Haribabu Bodapudi

  • Account Determination Error for Rebate Settlements

    I have question on Account Determination for rebates
    Here are the entries that I have made in VKOA
    ERB - R201051
    ERU - R201051 / R120201
    ERS - R120201
    ERL - R559001
    I am able to accrue the money to right accounts, but I am getting an Account Determination error when processing rebate settlements
    Any input on this would be really helpful.
    Thank you!

    Hi Shailesh
    When you are getting the error in rebate settlements it means you carefully check
    all the combinations for VKOA settings. Whether the Account assignment
    group in all the Materials used in settlement document along with the customer account assignment group
    is maintained or not. Also check in the pricing procedure the account key used.
    For all these account key the settings are made in VKOA or not. Hope it will help you
    Thanks
    sushant

Maybe you are looking for