Recharge batteries with MuVo N200 Mi

hy guys,
i'm a new subscriber of this forum. I have a Creative MuVo N200 micro and i haven't yet understand if i can recharge my batteries connecting my MuVo to pc with usb.
Can you reply to my question.....
Thank you all

BognorRocks wrote:You could always take the battery out and connect it up to the USB and see if it works.
It does. It runs off the USB power while connected, so there's no need to worry about battery power loss.
I've got rechargeables for my N200, 800mAh ones, though I'm not sure how long they last in one go, last me about a week listening for a few hours a day

Similar Messages

  • Rechargeable batteries with MuVO Micro N

    I have recently got a MuVo Micro N200 and find it annoying having to keep buying new batteries to put in it do you know if i can use rechargeable batteries with them? And if so so they have to be a certain type? Thanks

    Some people have had a problem using rechargeable batteries that are new. Search the forum. There are a few threads about this.

  • Panasonic Oxyride Batteries with Muvo TX

    I've recently bought a GB Muvo TX FM which I'm quite impressed with and I was wondering what the official view was on using Oxyride AAA batteries with the player.
    I picked up the batteries without really looking at them but I see that they seem to be quite heavy duty and I wondered if this might be a problem with the Muvo. Any ideas anyone?
    http://www.panasonic.com/consumer_el...e_ms/flash.asp

    These batteries are .7 v and might imo damage some electronic equipment due to the higher voltage. They are also very expensi've. $5-$6 for four? If one shops carefully, they can get Maxell alkaline AAA batteries for around $4 or so per pack of 20.

  • Problem with muvo N200 (power syst

    hi
    my mp3player have one problem:
    my device has a breakdown after powering on for several times and it needs to replace its
    battery or connect to usb to can work again what can i do with this problem
    by the way i update it recently
    by thanks

    Do you mean the button are damage or what? Try download and install the latest firmware. It will help solve many many problem.

  • Muvo N200 - Rechargeable batteri

    Does anyone know if I can use rechargeable batteries (Ni-Mh) on Muvo N200?

    Yes, although some users have had trouble using new nimh batteries. It is strange that this occured. Do a search of this forum to read the threads. If you do plan to use nimh batteries with the n200, make sure to get a charger that has a separate charging circuit for each battery. Many chargers charge batteries in pairs(or even 4 in one circuit), and this will not properly charge batteries that are in different stages of discharge(since they have been used one at a time). The chargers with a separate charging circuit for each battery usually have a separate charging light for each battery.

  • All MuVo n200 users should read this!!! really wo

    Hi i?m pepe, and few days ago i wrote for help, i was having problems with my muvo n200 when i wanted to listen mp3 file it played then with a scratch sound in the background.
    Finally after reading, and reading, and more reading found this advise from a genius person who must work for creative, and i really mean it cause the gays from "support" treat my problem as a child?s stuff, "is the battery working" "is your player pluged correctly" dammn it.
    So every one having problems with MuVo N200 shoud go to this page.
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=23264
    I?m going to copy and paste it so you can read.
    Hi. After I dont know how many hours I finally got mine to work. I hope this helps you, although I am not sure if it will. I am not exactly sure why it worked, or how ( maybe just a whole lotta hoping!)
    Anyway....So I did a bunch of stuff a billion times. But here Is what I did most Recently to get it to work: ) Delete any old Creative files related to your player. 2) Reinstall the CD 3) Download Firmware upgrade .20.04 to your Desktop. 4) Download Mass Storage Driver .07.00.250 to your desktop. 5) Try to put it into recovery mode like you have probably done before by taking out the batter and holding play while you plug it in. 6) Instead of waiting for a "find new hardware" dialog box, i double clicked to open the new firmware file I had downloaded. This searched for my player and found it. 7) A box will pop up to upgrade your firmware. MAKE SURE TO SELECT THAT BOX THAT SAYS "FORMAT DATA AREA" before your start. ( I think this is where all my problems came from.) This worked for me and that was all I had to do. I didnt actually do anything with the Storage Driver download except put it on my desktop before i plugged my player.
    After multiple correspondences with some not-so-bright support people, they did say if the recover mode wouldnt go or i couldnt get anything to work that I would have to send it back in for "Return Merchandise Authroization." If your contacting them, dont hold your breath too long....it takes a very long time for a response.
    Hope this helps you!
    AB
    Thank AB84, thank you very much
    Cya around

    Yeah, I don't know why he didn't link to the original thread, where you can see all of AB84's posts and another post (from me) that gives an alternati've for reinstalling the CD. Here's the link:
    http://forums.creative.com/creativel...ssage.id=23264
    He's right, though, to advertise to N200 owners with a shouting title (we should bump this occasionally), as Creative just won't put this in their instructions, yet there seem to be plenty of us N200 users that get stuck where our computer can't recognize it in recovery mode.

  • I really need help with my creative MuVo N200 mp3 pla

    i got my MuVo N200 mp3 player for chirtmas of last year, and it stopped working in 3 months. it used to shut off every few minutes and the mic doesnt work any more and i cant record music from the radio. right now it doesnt even work for a minute, it shuts off as soon as i try and turn it on. i emailed creative when it first started happening and they sent me a email saying what to do on there website, something about downloading something. i tryed it and it didnt work, im not sure if i didnt do it right. And right now i have no idea what to do. and creative won't help me unless i pay them money to fix it for me which im not about to do. has anyone have the same problem with the MuVo N200 mp3 player? what am i suppose to do to fix it's I still have there email telling me what to do, but i just dont get how to do it and if it will work. It only worked for me 3 months, and now im mad and thinking about buying a new one thats not from creative but i really want to try fixing it again to see if it will work. please help me.

    Good question, unfortunately I have absolutely no idea. Reflashing/-formatting generally takes care of the usual cases of wonkyness this player develops, and there isn't anything more drastic you as a user could do.
    Do you have a directory named "Recorded Tracks" on your player? Should be created automatically, but if it isn't you could try creating it manually...

  • Any problems with rechargable batteries and tx

    Ive read that rechargable batteries are a problem on the nano plus. Im about to buy a tx fm and want to make sure rechargables will work with tx model.Any specific type i should look at?

    What's probably happening are two things () some batteries aren't producing sufficient voltage to dri've the player (2) rechargeable batteries can take a few charges to work fully, so people may be having problems with the first few charges supplying sufficient voltage.

  • MuVo N200 problem with playba

    I have an older MuVo N200. I have transferred some of my class notes to it and it had done just fine so I transferred some musice to it as well. It played back very well for about 2 days and now it is just a high pitch squelling:angry:. I have lost some of the songs that my daughter has sung because it has garbled and destroyed them ? Any way I would just like to know what is going on. I have deleted the music and?transferred it again and it works just like it is supposed to and the play back will be fine the first time around then... sounds that remind me of really, really bad radio station static. Any ideas? Help is appreciated.

    I suggest reloading the firmware. This will also reformat the player, so everything stored on the player will be lost. Make sure you have copies on your pc first. Search the forum for detailed instructions about how to reload the firmware.

  • MuVo N200 Line-In Cable with RCA plu

    Does anyone know where to get a line-in cable for
    the N200 that can plug directly into the dual
    RCA-type stereo jacks that are typically found on
    the back of a stereo? Or if no such cable exists,
    where to get a cable that would have RCA plugs on
    one end, and a standard mini 3.5mm jack on the other
    end? Then you could plug the cable that came with
    the N200 into that.
    Regards,
    -TW

    argh! ok, i can't find this cable anywhere, even RADIO SHACK doesn't have it so hey CREATIVE PEOPLE....where can i get one, or a replacement or whatever. help!

  • What kind of rechargable batteries (AAA) should i u

    Hi ! I would like to know what kind of rechargable batteries i could use on my Nomad Muvo. The player works with AAA batteries and i've seen many tipes of rechargable batteries for sale (Ni-Cad,Ni-Mh and others).
    Thanks for the attention.

    Any kind will work. The higher the capacity you get, the longer the player will last. High capacity NiMH are usually a good bet.

  • My MuVo N200 WONT WORK!!!!HELP PLEASE!!! DESPERT LOUISIANAN IN KNEED OF AN AN

    MY MuVo N200 wont work it turns itself off after the creative logo Ccomes up. I have new batteries upbaterd the softwair filmware and reformater durt that diden't work!!!!!
    I had no AC OR power for adout a mounth I li've in Mandeville Louisians in SST. TAMMANY PARISH the MP3 PLAYER MoVo N200 stayed in the heat for about a mounth with no power or ac in the housre because katrina knocked thepower out could my MuVo N200 52 MB not take the heat of the day that it just stoped working and got so to speaked fried in the heat!
    I would like to get my MuVo N200 52 MB fixed soon and some ancers on why it wont work when i reformated it , did the latest film ware, and the latest software up dates. this is comming from a desperat louisianian and LSU FAN PLEASE HELP ME AND AS soon as possible please!!!!!!!!!!!!!!!!
    Thanks
    Mistery_Girl

    Have you tried reloading the firmware? Make sure to follow the instructions at the download page.

  • Muvo N200 random shutd

    Hi all.
    i bought myself a great new muvo n200 last week.
    it was great till yesterday. i was walking to take the bus and my headphones fell off and when i put em back on, there was no music playing. so i checked and it was off... so i turned it back on and the radio started (i was listening to mp3s.) so anyways, it was allright for a few more hours and then today, it didnt turn on (just saw the intro screen)
    so i got on the bus again and i played with it in the afternooon... it kept shutting down.
    it's not a battery problem cuz i had 6 diffrent batteries in there to test it.
    i did the format and that just allows me to open it. but i cant select anything in the menu cuz that just kicks me out.
    now is there a way to fix this? i mean i can't even get to the menu half the time.
    is this just a manifacture defect or something that i coulda did?
    if anyone has info, plz let me know before 5pm tomorrow cuz i'm about to return it!!!

    Ok my MuVo n200 (52) doesn't shutdown, sorta, if I push the scroll wheel to access the menu options the screen clears but the music continues to play, i can turn the volume up and down, but there are no graphics. When it's in this "mode " I am unable to turn it off. I can take the battery out and and turn it back on and the music starts, and then the whole process repeats itself If I try to access the menu again.
    I'm guessing you'll say to reformat, and firmware update.
    Also I only have one folder, i recently deleted my other folders on the n200 and I'm wondering if that might be an issue as well.
    Thanks for your help,
    Victimiza

  • Rechargable Batteries for Wireless Keyboard and Mouse

    I'm wondering if rechargeable batteries are compatible with the Wireless Keyboard & Mouse, and if so, what types does Apple recommend? I'm constantly going through regular batteries to power these devices. Thanks.

    I bought some ordinary rechargable batteries from Maplin Electronics (AA NiMH) and they were perfect (even came with an AC charger) for £9.99 (they supplied 6 and 2 AAA), so perfect for the keyboard.
    Hope that helps.

  • Muvo n200-not find by

    hello
    I got a big problem with my muvo N200. When I connect it through usb to pc it's not recognized.the picture which shows that player is connected to pc is not appearing. I can't upgrade the firmware and do anything with usb. I tried this on other pc's and different usb cables....where's the problem?

    Try this:?http://forums.creative.com/creativel...ssage.id=23264?Read posts 3 and 4. Several N200 owners have gotten satisfaction from this, e.g.,?http://forums.creative.com/creativel...d=00348#M62247?I occasionally come back here to check on N200 failures, because Creative just won't put this in their FAQ, I guess they feel they have to see it work for themselves. Even the uber-posters won't acknowledge this fix discovered by AB84. Hope it works for you, as it has for several of us.

Maybe you are looking for

  • ERROR while saving the runtime systems(read time out exception)

    Hi e xperts I am configuring NWDI and assigned asll the permissions and roles to the CMS user.I created Domain,in landscape configurater created track and saved. while saving the rumtime systems the error thrown is com.sap.cms.util.exception.conf.CMS

  • BP Search in ICWB in CRM 5.0

    Hello Experts We are using CRM for a customer who has some milions of business partners. The Business Partner search in IC WebClient is very slow and there are cases where the page gets time out.If we dont use exact search criterias the search is ter

  • Need to draw line after the 2nd line item(Smart Forms)

    Dear Friends, I need to draw horizontal line after the 2nd line item  and 3rd line item in smart forms.How can i achive this. Plz help. Edited by: farook shaik on May 19, 2009 8:19 AM

  • Oralce 9i & 10g

    I have oralce 9i and 10g installed in my machine, the OS is windows. 1. Now, i need to open an sqlloader which is of version oracle 9i. Now what is happening is when i got to command prompt and type sqlldr, by default it is taking oracle 10g sqlloade

  • Dunning term field in Business partner master data Screen

    Hi all,            I have created a dunning term and i want to assign this dunning term for all customers in my DB. could anybody tell me how do i assign this.            I dont want to assign it by going into each and every BP master data. ive 3000