Recherche cable cable AD_EXT de connection entre carte pci et module de faca

Bonjours,
Est ce que quelqu'un pourrait me dire ou trouver ce cable (celui qui ressemble a une nappe IDE) ?

J'ai trouvé le point final à cette question.
En fait la doc NI n'est pas fausse, mais incomplète.
http://www.ni.com/pdf/manuals/322072a.pdf
page 96 et 97, figures B-3 et B-4 (et texte).
Un R1005050 se subdivise en 2 connecteurs IDC de 50 contacts chacun.
Le 1er IDC50 reprend (effectivement) les 50 premiers contacts du connecteur 100 (de 1 à 50),
le second IDC50 reprend les 50 suivants (de 51 à 100).
Comparer les figures B-3/B-4, page 96/97 (les 2 IDC50), avec la figure 4-2 page 32 (celui de 100).
Dans le cas d'une 6025E, sur le 2eme IDC50, on retrouve uniquement les 3x8 DIO du 82C55A.
Le 1er IDC50 reprend, lui, toutes les connections "chaudes" d'un DB68 classique (série X et M)
Ce cable R1005050 (également le SH1006868) permet donc aux cartes avec sortie 100 broches
d'être compatibles avec les accessoires NI ... qui sont toujours à 68 broches en entrée.

Similar Messages

  • Driver Windows XP pour carte PCI série 4 ports RS232

    Bonjour,
    Je suis à la recherche du driver Windows XP pour une carte PCI - 4 ports RS232 référence NI-184683D-01 qui était livrée à l'époque avec une disquette 3 1/2 avec driver Windows NT/95/98 (je sais cela date un petit peu!!)
    Ce driver existe-t-il? si par hasard une bonne âme???
    merci de votre aide...

    Bonjour,
    Le driver se télécharge sur la page ci-dessous :
    NI Serial 3.8.1
    Cordialement
    Jean-Philippe C.
    National Instruments France

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • PS3 error: "An Ethernet cable is not connected" with E2000

    Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router.  If I reset the cable modem, it will work for 10-15 minutes until it errors out again.  If I plug the PS3 directly into the cable modem, it works fine. I'm really confused.
    1. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine.
    2. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.
    I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems. This was back in November 2010.  I replaced it with a Linksys E2000 router in January 2011, and a slim PS3 in late September 2011.
    I had no problems from January until last weekend.  I have tried to do the DMZ trick, but no luck. I have also tried to set the primary and secondary DNS to 4.2.2.1.
    Does anyone have any insight? If I need to buy a new router, I will, but I don't understand because it works for my computer and Touchpad.  Is it something crazy like when November comes, my internet settings get corrupted?

    Try using the DHCP reservation feature to give your PS3 a "static " ip outside of the DHCP server range. So something above the range called "IP Address Range". 192.168.1.150 should be good, but you can check to confirm that this address isn't in that range. 
    Make sure your PS3 is set to obtain the network information automatically, NOT through a custom setting. Also, make sure your PS3 is turned off completely before doing this. 
    Could you also give us a screenshot of the "signals" tab when you go to 192.168.100.1?
    I don't work for Cisco. I'm just here to help.

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I cannot get sound through cable box after connecting apple tv

    I cannot get sound through cable box after connecting apple tv, any suggestions?

    Perhaps you disturbed or loosened the HDMI or other cable  from the cable box to the TV?

  • Cable specification to connect the Document Camera to the CODEC CTS 3010

    Hi to all,
    I would like to know  the cable specification to connect the Document Camera to the CODEC in a CTS 3010 and which way round it needs to go.  As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable.  Can you please clarify?
    Best regards,
    Alberto

    Yes.  There are a ton of write-ups on how to do the connections.   I connect my m-audio Keystation 61 es through the CCK to my iPad and use GarageBand to control it.  Some keyboards require a powered USB hub to make things work.  I use a belkin 4 port hub in my own setup.   Here is a link to tested / verified keyboards that work via the CCK:  http://iosmidi.com/devices/
    Hth

  • Cable Driver to connect Nokia 6233 to Ubuntu?

    Please, can anyone will help me to find out Nokia 6233 cable driver to connect with Ubuntu OS. Because PC Suit is not working on Ubuntu OS.
    I am Looking for your help
    Online Money Making Tips

    You should be able to use the CA-53 cable.
     http://europe.nokia.com/find-products/accessories/all-accessories/memory-cards-and-cables/cables/nok...

  • Nokia 6610 cable CA-42 connectivity problem

    Hi guys..
    Am having a Nokia 6610 and am facing problem in retriving datas from that.
    Am using connectivity adapter cable CA-42.
    System OS:windows XP
    I tried to retract datas from my phone using PC suite latest version 7_9, installation goes well, but after installation when i tried to connect my phone, its not recognizing my phone instead its showing some connection wizard which is showing some "USB to UART"
    Its not proceeding beyond step3 in that connection wizard, not showing the contents of my phone.
    I would like to ask which PC suite is best for this model and cable and cable drivers as well?
    Thanks in Advance.
    Ram

    Hi franticfreddy,
    Do have backup of your phone data & PC registries then
    Uninstall Nokia PC Suite, Nokia Connectivity cable driver, PC Connectivity solution, Nokia flashing cable driver(if any on your PC), Run PC Suite cleaner. Run reliable registry cleaner for PC.  Install latest Nokia PC Suite from nokia.com/pcsuite, reboot your pc.  Once pc started, connect your phone with USB in different ports of your PC and check

  • Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

    I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...
    Also see your other post >  After updating iOS iPod is showing only iTunes log with USB Cable..

  • IPod screen showing only USB cable to be connect to iTunes after Update and Restore.

    My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb)  iOS 6.1.6  again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device... Re-Sync your Content

  • Cable Modem internet Connection Setup

    Hello
    How do i setup a Cable modem internet connection for my x86 solaris machine
    I have the hardware connection set to go but i have no clue on how to set it up the software.
    Thx

    go read the FAQs pointed to from www.sun.com/intel

  • Cable Advice for connection to HDTV

    I am waiting for delivery of a Pioneer LX5090 and a new MBP but I am confused as to the type of cable required to connect these two up.

    For the video, you need a mini-DisplayPort to HDMI adapter like THIS ONE from monoprice.com, and an HDMI cable.
    For the audio, you need a mini-stereo to RCA cable like THIS ONE from amazon.com (these are commonly available). The TV you list does not seem to have digital audio input (though it does have digital audio output).

  • PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

    I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

    Don't worry about the cable. For now.
    Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
    Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
    Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
    Do a snapshot of the TC setup from airport utility and post.

  • SQL Developer (Cloud connections) to Cart not working

    I follow the QBE execise along with Oracle Public Cloud. Why nothing happend when I drag/drop tables in SQL Developer (Cloud connections) to Cart?

    Can reproduce same issue in 11gR1.. DIFF works fine in 10gR2.
    I noticed that 10gR2 allows something like:
    DBMS_METADATA.SET_TRANSFORM_PARAM(th,'SEGMENT_ATTRIBUTES',0);
    and 11GR2 returns error similar to error SQLNAVIGATOR returns while running diff:
    DBMS_METADATA.SET_TRANSFORM_PARAM(th,'SEGMENT_ATTRIBUTES',0);
    end;
    Error report:
    ORA-31600: invalid input value 0 for parameter SEGMENT_ATTRIBUTES in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 8424
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 9484
    ORA-06512: at "SYS.DBMS_METADATA", line 3950
    Its safe to assume that this is SQLDEVELOPER bug. Hope it will be addressed sometime.
    Edited by: user5420304 on Jun 15, 2010 10:29 AM

Maybe you are looking for

  • Moving Itunes/songs on XP PC with multiple users

    I have seen the good articles on moving songs/library from an old to a new PC and seems easy. My concern is how this all works when I have three users/XP accounts on my old PC and each user has their own library, playlists, etc.. and I want to move a

  • How and where should I create a parameter list

    Hi, I4m trying to create a parameter lists but I don4t know where and how. I guess as a program unit but as function or procedure, sorry I4m new on this for that I4m finding this a bit difficult. Please, someone could help me to understand this: PROC

  • Can't get printer to finish reading sd card

    i placed sd card into hp psc 2410xi photomaster so I can print out a proof sheet. I have more than 1240 pictures on sd card and the printers screen just keeps showing Reading card...It has been doing that for about 10 minutes or more. Is it because t

  • HTML table containing SQL output in cells

    Hello, This might be a built-in function, but I haven't figured out how to do this: I want to display an HTML table (2x3 table) and in each cell, I want to display the output from different SQL statements. Some of the SQL statements return multiple r

  • How to add push button in application tool bar in SAP transaction VA01

    How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.