Reciept element purchase requisition not appearing in mrp order report

Dear Gurus
Receipt element purchase requisition is not appearing when I am trying to see the order report after running the mrp for the finished product .But the reciept element planned order is appearing for the semifinished products which are in the bom of the finished product.And if stock for raw materials are there then also it is showing the reciept element stock.Why is this happening ?
Regards
Sandip Sarkar

Unable to interpret your query.
Based on my guessing.... a PR is not visible for the Finished material as it must be a make material & if a planned order is showing up it means there is not enough stock to meet the demand. Now the dependent demand flows down from the finished to SFG & RM respectively & hence the supply proposal.
The above is a straight forward planning cycle flow, so what the issue am not able to figure it out. Either you upload some screenshots & paste the link here or provide a detailed explanation to get a clear understanding.

Similar Messages

Sub contracting Purchase requisition not created thru Service Order

Hi Experts,
I configured to create Service order automatically from Customner service.
Now we have the SM03 repair service order .When we try to create Sub contracting Purchase requisition.
(Selecting Subcontr tick in External tab of Components tab)system gives error saying --
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'
Message no. AD_SUBCON109
I checked the notes and It was not help ful.I understand I was doing something wrong in creation.
The control key used is SM03. Can any body help me in the above problem.
Regards
Rammohan.

Dear Sen,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

Actual and Commitments values are not Appearing in Internal order report

Hi
We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
Please help me in this regard...
Thanks,
Saisri

Hi,
Here we are giving internal order in PO with account assignment category 'A'
In case of Account assignment category 'K' it is showing the Actual values in Report.
Why is it showing Actal /commitment values incase of 'K' ?
Why it is not showing when we select the 'A' category ?
Please provide me answer about my queries...plz
Thanks,
Saisri

Purchase requisition not subject to a release strategy

Hi All,
When I will release PR, appears Error: "Purchase requisition not subject to a release strategy". I've check the configuration, but it was appropriate. Can anyone help me to find the solution?
Regards,
MamaRara

hi
In our case also we have faced this problem
Usually when you are executing ME54N the system displays the latest viewed / modified PR.
Hope in your case the latest PR viewd / modified is not subjected to release. Hence it is showing the message
Go to ME22N open your PR - Press save button. Then try to open the same in ME54N.
Hope this will help you
SAS

"Material purchase requisition" not allowed (Use Status PROV, object TM0000

Hello Gurus,
I am getting the following message every time I enter a material in the sales order. The material entered requires a Purchase Requisition (PR) to be created when it is entered in the order. We have done Configuration thru Order Status Profile that will prevent PR creation at time of Order creation.
The message is as follows:
"Material purchase requisition" not allowed (Use
Status PROV, object TM0000000001VB)
Solution requested: We do not want to see this message appearing so many times. Can you pl let me know if there is a way to avoid this.
Thank you
Vasavi

Hi Vasavi,
I am not talking about the po check above that one tab like check purchse order no in this feild keep emty and also below that enter po number also keep un check
and also please check when you creating sales order beside po date one tab is availble check any data in default that
that tab name is display doc header details in that tab purchase order tab in that any infirmation is default check that also
Hope this will helps you
Prem

Purchased apps not appearing in history

Hi everyone,
I am writing you concerning a problem I have encountered with several apps on the appstore that, despite being bought, persistently refuse to appear on my list of purchased items. I have tried downloading them with different devices, even those that belonged to friends of mine, and the problem remained. It was impossible to find the apps in the purchase history.
The apps in question are the following:
- Phantom seeds
- Juniper's Knot
- The Raven by Edgar Allan Poe
- Ghost Trick : phantom detective
- Ace Attorney : Phoenix Wright Trilogy HD
- Pictures at an Exhibition -Free Adventure Gamebook
- London Detective Story - English Version
The common element amongst all the above apps is that they are free (some of them do have IAPs however). My problem is that if the apps are ever removed from the app store, I will have lost access to the content I have purchased.
Please feel free to try to download these apps on your idevices and you will see that they do not appear in the purchase history.
Do you know how this issue can be fixes? The developers have declined responsibility and referred me back to Apple's customer service.
Thanks in advance for any advice.
Best,
P

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

MRP creating additional purchase requisitions for the existing sales order

Hi,
We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
Please advise
Thanks in advance
Srinivas

Mangesh,
If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
Regards,
Prasobh

Purchase requisition not generated

Hi Gurus,
Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
Thanks in advance...

Hi,
As per my understanding, you are running Third Party Process, if yes then, please maintain the following setting for the same;
Mater Data Settings:
1. Item Category Group as BANS in sales org 2 in MM02
2. in MRP2, in procurement type should be 'F'
SPRO Settings:
1. Item Category TAS: Maintain Billing relevance as 'F'
2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
3.ASSIGNMENT: assign Schedule line CS to item cat TAS in VOV5 and TAS to order type in VOV4
4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
Now run the process..I hope this will help you...
Regards,
Bharat B

Purchase requisition not to be created if sales order is incomplete.

Hi ALL,
I have a requirement from the business wherin they want purchase requisition not to be created for the incomplete sales order
in case of third party / invidiual P.O sales orders.
We have defined some fields in the item category incompletion status and if this fields are empty then the P req shld not generate.
Can anybody guide me what settings to be made to acheive this.
Please help me in this.

In t.code OVA2, try to assign an incompletion procedure at schedule line level. This procedure can be assigned with relevant status like checking goods movement, and general checked. Then test the scenario.
There is an OSS note out there, but it is NOT exactly represents your scenario. However you can have a look at it.
Note 623267 - Purchase requisition in spite of missing configuration II
Regards,

Flash element panel does not appear when Flash is selected in DW3

In DW3 (Win7) After creating several slide shows using image viewer and months later when I want to edit the image viewer.. When I click on the flash slideshow that I created in image viewer in order to edit it and the Flash Elements panel does not appear on the right as it did before. I have the Tags panel open and it has changed to Flash elements in the past but it is no longer appearing. This happened with a friends DW3 also.

DW3 or DW CS3?

Purchased apps not appearing

I have an iPad that has several purchased apps (specifically angry birds). I got an iPhone and angry birds is not available for transfer. What can I do?

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Purchases do not appear on purchased list or music, even though it says they should be there

What do you do when you purchased from ITunes Store and it says that you purchased it, you checked for available downloads, says none available, but the purchase does not appear in Music or Purchases?

Did you load the Materials into the material Library?
Select a Material
Click on the Thumbnail to enable the flyout
Then click on the little triangle on that flyout (I know we will fix this )
You should see a Load Materials and below that a list of Materials (screen hot)
You can also mnaual add them to the Preset folder > Materials (screen shot)

Purchased Apps not appearing in purchased section!

My iPad was recently wiped out. As a result, I need to reload all of my apps from the app store. When accessing the 'Purchased' section on the app store, my purchased apps do not appear. The screen is blank. If you randomly click on the screen, the individual app wll appear on a new screen. However, I have a large quantity of apps to download, and I will not be able to do that for every app. Help!

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Purchase requisitions which created during Sales Order missing in MD04

Hi Guys,
I have an issue with MD04.
Purchase requisitions which created during Sales Order missing in MD04 are not appearing in MD04, but these are showing in ME5A. After MRP Run only PRu2019s are showing in MD04.
Requirement type used 511 during creation of Sales Order.
Please advise me if any config/ Master data is missing OR If required any enhancement.
Regards,
Purna

Did you checked for the Firming indicator in PR's?

Freed Goods not appearing in Returns Order

Hi Friends,
We are trying to configure the Free Goods scenario in our system. The free goods have been successfully configured for outbound sales orders. However, in case of returns, when we create a return order, the free good does not appear on the order.
How can we configure the returns orders for free goods.
Regards,
Abhishek

Hi,
Please also check whether you have done item category determinaiton for that Return order..
Retun order type + Item catergory group + Usage + Higher level item category + item category..
And also have a look into free goods record in VBN1 tcode..
Let us know how come your are creating return order without any reference. Please explain the senario..
regards
sankar
Edited by: sankar sankar on Jul 9, 2008 12:54 PM

Reciept element purchase requisition not appearing in mrp order report

Similar Messages

Maybe you are looking for