Reciept from PO - Why stock not updating

Hi experts,
I am making GR in a Plant (ISBW) but didnt mention the storage location so when i open the stock list it didnt show goods which i recieved. My question is where is my material or did any step i am missing between a goods reciept from PO and storeing it in the storage location.
My second question is that when i create a Goods reciept of an item 70 which is finished product it says Material 70 does not exist for ABC storage location. Message no. L9023. Where to fix this issue.
the third situation in relevent to the SD module that when we enter material 1 during SaleOrder creation is automatically change it to material 70. Y?
Thanks

Hi Usman,
For your first case, If u have the PO assigned to Cost centre, then upon GR then qty will be consumed upon recieving and will not go to the Storage location. So please check whether your PO is account assigned or not.
Reward if u find this useful.
regards
Anand.c

Similar Messages

Why does not update my applications to cc?

Why does not update my applications to cc? I have all the programs in cs6, adobe aplication manager and tells me this all updated, , but does not update to cc

CC applications will be available from June.
Please refer : http://www.adobe.com/products/creativecloud/faq.html

Stock not updated after GR with 103 & 105 movement types

Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...

Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara...

Moving Average Price and Total Stock not updated for MTO scenario

We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
2)Moving average price does not updated after periodic settlement is carried out.
It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
p/s: on ECC5 system.

Hi,
Good morning and greetings,
The standard SAP says as below
The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Confirmation of production order - stock not updated

Dear all
On confirmation of production order,all dependent requirements as per bom (stock available at storage locations) should get updated ( as I set back flushing for all material stocks at material master level). But, when i do mb31, final product stock is updated, and bom stocks not getting updated.
what is the reason.please give solution

Hi GB,
Please analysise the following :
1.COGI what is exact error u are getting.
2.Did u check the following options
1. In the routing, the backflush indicator is set in the component assignment.
2. In the material master record, the backflush indicator has the characteristic "Always backflush".
3. In the material master record, the backflush indicator has the characteristic "Work center decides", the indicator being set in the work center.
Use
3.MB31 is for GR of stock means it post the stock at FG storage loactication ok.
4.If u need to update in BOM stock , u have to do it by MB1C/MB1A with movement type 262.
5.Check the stock in MMBE whether u have maintained ornot.
Please check all those anf come back.
Regards
Jia

Stocks not updating

Since upgrading to 3.0, the stock app will not update my prices. It just clocks. Is this related to 3.0 or is the market just having a bad day?

Same here, stocks and weather on my regular iPhone 3G. Last updated this morning. I thought I was going crazy because everything else works and I reset the phone. Hopefully yahoo is fixing it soon.

Why Confirmation not updated in ERP

Hi All;
We are using SRM 7.0 classic scenario & ECC6.
The user created confirmation and the manager approved it. but while transferring to backend, somebody was editing the PO. As a result, the system did not update the GR in ERP.
When i checked in in BBP_PD i found stats: currently being transferred"
How can I trigger again the confirmation to be transferred to backend.?
Thanks

Dear;
I have already checked in WE05 but I dod not find that IDoc other IDocs are successfull.
Now I am trying to cancel or re-confirm the confirmation but the system gives error message
System status FREE is active
System Status TRANS is active
what should I do to re-transmit it.

TS4083 emails sent from my iPhone do not update the iCloud server or my computer

I have a problem that emails that I send from my iPhone do not appear in my computer or in the sent folder in the iCloud server. Any help with this? I have a lot ef sent emails from my iPhone that I don't want to lose!!

Yes, iCloud is my default mail.
The problem I see with deleting the account is that I fear I will lose the sent mails which are only stored in the iPhone but nowhere else. I have also realised that the only emails that the iCloud server Sent foilder has stored are the ones that I sent from my Macbook and not the ones I sent from the iPhone. So in Summary:
- Emails sent from MacBook Air - stored on the iCloud server and MacBook
- Emails sent from iPhone - stored on Sent folder on iPhone
Any further thoughts?

Stock not updating after doing MIGO (gr) for third party sales

i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

Dear friend
Hope you are clear about third party process
In third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
In many of the scenarios that i have seen there is no MIGO itself done
To have MIGO is purely optional in third party
I am enclosing here with the threads which were discussed on the same
Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
MIGO- why we do it in third party sales?
Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
Why MIGO is required in thirdparty scenarion?
The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
The stock is not there? How can you see that ?
If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
If not happening means there is some customization error with the PO from MM side Check with MM colleague
Make sure if the item category is TAB then schedule line category is CB
In VOV6 for schedulle line category CB
NB is the order type
0 is the item category
E is the account assignment category
Regards
Raja

Stock not updating after STO?

There are two plants 5000 and 7000.Plant 5000 transfer material to plant 7000 with STO process. But after STO process stok of plant 7000 is updating (addition) but stok of plant 5000 is not reducing..Both material document is showing right quantities .

Hi,
Check which MOVEMENT TYPE you are using when transference (issue) for that movement QTY UPDATE should be active
go to OMJJ and Put your movement type and then at left side option UPDATE CONTROL/WM movement type.
It could also happen if the Delivery against STO is not created as in such case , stock is not reduced from the Supplying Plant. Else check the Settings at Plant Level in T Code OMS2 if it's happening for every Material from any of these two Plants.
Sridhar.

DLL data from a memory address not updating at correct rate when using DAQ

Hi,
I am using a USB DAQPad-6015 to acquire data from 8 analog channels and using an external clock (200Hz). I am also retrieving data from a library function node call which schedules a callback function to run at approximately 1000Hz. The function prototype accepts a pointer to an array, and the array contents are updated each time the callback function is run. Thus in labview I initialize an array and pass this as a parameter and am able to retrieve the data.
Using an event structure I am sampling the data from the library function node every time the DAQ takes a sample (so at 200Hz). I expect to see no repeated values from the dll data, but this isn't the case.
I am not sure why this happens. I thought possibly acquiring data from the analog channels takes priority over the scheduled callback function -- thus it might not be running at 1000Hz as I expect -- but I'm wondering if there could be any other explanation.
Any help would be much appreciated.
I've attached a simplified version of the VI and the output data.
Attachments:
multifunction_data.xls ‏139 KB
multchan1simp.vi ‏32 KB

But the data in the array is updated after the library function is first called. I think somehow LabVIEW is accessing this from a memory address. The attached excel file shows the results from the data, and the value is updated every couple of samples. I'm just confused why it isn't updated every sample.
I do have the source for the C dll though. I'll see if I can modifty it as you suggested.
The actual callback function is the following:
extern "C" __declspec(dllexport) HDCallbackCode HDCALLBACK updateDeviceCallback(void *pUserData)
   hdBeginFrame(hdGetCurrentDevice());
    /* Get the current location of the device (HD_GET_CURRENT_POSITION)
       We declare a vector of three doubles since hdGetDoublev returns
       the information in a vector of size 3. */
    hdGetDoublev(HD_CURRENT_POSITION, gServoDeviceData.m_devicePosition);
   hdGetDoublev(HD_CURRENT_JOINT_ANGLES, gServoDeviceData.m_deviceAngles);
   DevDataArray[0] = gServoDeviceData.m_devicePosition[0];
   DevDataArray[1] = gServoDeviceData.m_devicePosition[1];
   DevDataArray[2] = gServoDeviceData.m_devicePosition[2];
   DevDataArray[3] = gServoDeviceData.m_deviceAngles[0];
   DevDataArray[4] = gServoDeviceData.m_deviceAngles[1];
   DevDataArray[5] = gServoDeviceData.m_deviceAngles[2];
   memcpy(pUserData, &DevDataArray, 6*sizeof(HDdouble));
    hdEndFrame(hdGetCurrentDevice());
    return HD_CALLBACK_CONTINUE;
Thanks for your reply!

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

IMovie 5.0.2 from iLife '06 will not UPDATE on Intel Mac?

I brought over all my programs from my 12" G4 Powerbook to the new Mac Pro with Setup assistant. iMovie opened fine and seemed to work. A couple of weeks later, after doing regular software updates & working with it, etc., the Title function stopped working. Just does not show any options for titles under that spot in the menu.
I thought I would install it fresh and maybe that would take care of the problem, so I put in my iLife '06 DVD (pre Intel) and tried to install it. It was greyed out, so I thought it couldn't install it if there was a newer version on the computer, so I put it in the trash & deleted it. (Dumb, I know) & tried to reinstall but it is still greyed out. I figuered out this is probably because the older version of iLife '06 I have is not a Universal installer.
I copied the iMovie application from my Powerbook again, and now I have the PowerPC version of iMovie 5.0.2 on my Intel Mac, but when it tries to open it hangs. The instructions for opening programs with Rosetta doesn't work since there is no option to open with Rosetta in the Get Info for it.
How do I convert the 5.0.2 to iMovie 6 so I can update it to Universal?
Thanks!
Tansef
12" Powerbook G4 867 MHz, Mac Pro w/Apple Display Mac OS X (10.4.8)

Can't you re-run Setup Assistant to bring over iMovie HD 5 from your PowerBook again?
A "pre-Intel" (i.e; non-Universal) iLife '06 might not install on an Intel Mac (..but I don't know: I don't have an Intel Mac ..though I'd have guessed that you could install it and run it under Rosetta). It might be that your "receipts" are messed up (..in name-of-your-hard-disc>Library>Receipts>iMovie..pkg..) but don't go messing there unless you put the iMovie packages in a safe place {..Desktop..] and move them back into the Library again after you've finished fiddling about! You may need to remove later receipts in order to install an earlier version of the program.
But I don't have an Intel Mac, so can't advise further, sorry.

Stock not update

Hi MM consultants
I have create GRN but stock ins not showing in MMBE
a/c assignment category is A (Asset) in PO.
pls tell what is the problem behind this

Hii,
Whenever you use the Account assignment categoary "A" the asset will be consumed (Captalized) to the main asset so stock will not be updated.
You can see in AW01N T-Code Asset Explorer)
Regards,
Kumar

I've recently updated IOS 7, but it asks me that updates is available, why its not updated in the first time, and also it aked me to be connected to itunes

I’ve updated the IOS7 from the iPhone, and after 3 hours, it asks to connect it to iTunes. after i connect it to iTunes it asks me that require update, then i agreed to update it runs for another 3 hours, and then a message shoed as "this iPhone needs to be restored, then i restore it. i lost all application and data. after two days i got a message that update is available of IOS7, which means my updates were useless. please advise on the way of updates, and do i will lose my data, and how i can recover?

Thanks, Lawrence. That's answered the 1st part of my question. Just wish I could get 2 the stage where I get all the icons on my screen!

Reciept from PO - Why stock not updating

Similar Messages

Maybe you are looking for