Recieving a signal from my guitar but no sound is heard.

I am new to Mac and Logic 8. I am using my guitar through a USB and it works through Garage Band. I can hear the sound fine. In Logic 8 I can see the signal being generated on screen and the tuner works but I cannot hear any sound. I am currently using the "software instrument" type of track, Unknown USB device input, and output 1,2. I can click and drag a loop into the arrangement and hear the drum loop fine. Does anyone have some advice? Should you always be able to hear the guitar or is it just during play or record? I appreciate any help.

I am using a traditional electric guitar with a cord that goes from the guitar to a USB port. I have opened a new file with a single audio track. I have set the input to the track as Input 1 and output as 1,2. I have highlighted the record (red) button and the input button (orange) and still no sound. It will however let me record and I can see the vibration line across the screen as I play. I stopped the recording and it will act like it is playing it back but no sound still. I checked the headphone jack as well. No sound there either. Any other advise. I appreciate your help. tuner works in this mode as well.

Similar Messages

  • I recieve phone call from my iphone but i can not make a call from my mac

    I recieve phone call from my iphone but i can not make a call from my mac What shall i do

    Hello alireza.s,
    The article linked below details a number of steps that can help restore your iPhone's ability to make phone calls.
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/en-us/TS3406
    Cheers,
    Allen

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • BLUETOOTH only picks up signal from mac computers but nothing else???

    does anyone have any suggestions as to getting my iphone to pick up other signals from cell phones or headsets via bluetooth every time i try and search for a device nothing happens but when its near a mac computer it conveniently picks up a signal???

    You won't pick up bluetooth from another cell phone since the iPhone does not include the bluetooth profile for transferring files or data with a cell phone or with a computer, but you should be able to pair your iPhone with a bluetooth headset that is set to be discovered.

  • Saved from the web, but no sound

    I was allowed to "save as quicktime movie" from a friends web site. When I play the movie, everything is fine. When I try to save it to iPod or anywhere else, I get video but no sound. I have QT Pro. When I look at the files props., it says that this video contains no sound. I'm not positive that this file wasn't a Windows Media file, or encoded as a MPEG-2... it there any chance to fix this problem? Would it be possible that the audio is embeded in the page and not the video?

    So to follow up: The clip that has sound on my desktop, if I use streamclip, chances are that it will export with sound?If the file is an MPEG-1 file with reasonably normal settings, then Streamclip should be able to convert it directly to an iPod compatible format and preserve the audio. On rare occasions where very unusual, custom audio settings have been used in conjunction with an intermediate conversion codec, I have seen poor synchronization between audio and video. But this is not the norm. Frankly, in the time it has taken for me to explain this and for you to read it, you could have made a 1 minute test conversion and examined the results for yourself. The only problem I can see would be if the media you wish to convert was an MPEG-2 file which would require the Apple QT MPEG-2 component ($19.99) to be installed. Since you indicated your could play both audio and video in the original file QT, then either you already have this component or the file is not MPEG-2.
    The basic problem here is the fact that QT is based on "frame-to-frame" synchronization referenced by an arbitrary unit of time. MPEG-1/2 "muxed" files, on the other hand, intersperse blocks of audio data with blocks of video data in a single data stream to physically maintain synchronization in terms of the "space" occupied by the different blocks of data. (I.e., one form of data cannot "overrun" the other.) These represent two different media technologies and is why you need an MPEG based application (or a hybrid thereof) to "assist" QT in these conversions. Owing to its wide use on the Internet, Apple finally added playback only support for MPEG-1 files. In a similar manner, you can add limited QT support for MPEG-2 files "for a price." Neither format can be properly edited in QT and will lose audio if converted to another format by any QT based application (QT, iTunes, iMovie, FCE, FCP, etc).

  • Airplay from Mac: Picture but no sound

    I have had Airplay working successfully with my MacBook Air and Apple TV for some weeks. Suddenly, I have lost the sound. The picture is being sent to the TV but the sound is stuck on the MacBook Air's tiny speakers. I have checked around but can see no reason for this sudden change. Anyone have ideas?
    - Michel

    It is possible the adaptor you are using isn't following the HDMI spec completely. Trying a different adaptor or updating the firmware or software on your TV may help.
    Which brand HDMI adaptor are you using?
    http://support.apple.com/kb/ht4241

  • Can my Airport Extreme recieve a signal from another AE?

    I'm buying a new iMac that will have an Airport installed in it. I want my old flat panel iMac 800Mhz G4 to now be wireless. Can I just connect the AE via ethernet and Bam be connected with my old iMac.
    I asked a question earlier about a USB connected wireless reciever instead of installing a airport card. But it looks like the USB external ones are a little unreliable.
    Thanks!!!

    Waldarsky, Welcome to the discussion area!
    I don't know how you ended up in the iMac (CRT) G3 discussion area since you question has nothing to do with that.
    I'm buying a new iMac that will have an Airport installed in it. I want my old flat panel iMac 800Mhz G4 to now be wireless. Can I just connect the AE via ethernet and Bam be connected with my old iMac.
    I think you are asking... Can I use the new iMac;s built-in wireless to create a wireless network and then have the AirPort Extreme base station (AEBS) wirelessly connect to that network and allow the iMac G4 access to the Internet via Ethernet?
    If that is your question... the answer is NO. OS X's Internet sharing is not compatible with WDS. Without WDS an AEBS can not wirelessly join a network.
    The same is true if you were to use an AirPort Express (AX) instead of the AirPort Extreme base station (AEBS).
    However if you were asking... Can I buy an AEBS and use it to connect my new iMac wirelessly and old iMac G4 via Ethernet? The answer is yes. The AEBS supports both wired and wireless clients.
    If I totally misunderstood, please clarify...

  • Picture, sound from far end but No sound from me.

    Running Mac Lion, I can run iChat, SKYPE, MSN with iSight with No problem but, there's No sound when I run FaceTime.

    Hi,
    In iChat if you have previously set a Volume in System Preferences > Sound > Input then iChat can change between the Audio Inputs you have.
    I have not experimented with the Choices for the Mic in Face Time Beta's Video Menu as I only have the Internal Microphone  (I am running Snow Leopard)
    I would check that
    1) the Mic you want to use is Selected ?
    2) That any Volume Selection in System Preferences > Sound > Input works for Face Time.
    You list no specs so I don't know if this is an Internal iSight and therefore most likely an Internal Mic or whether it is an External iSight with it's Mic input.
    If it is an External iSight try Opening Audio MIDI set up from the Applications/Utilities folder and setting the External iSight's sample rate to 41000 (rather than the default 48000)
    (Most other Mics are set to 41000 and Face Time might be expecting that)
    9:20 PM      Thursday; August 11, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Using an HDMI cable to connect to a monitor from Macbook Pro, but no sound

    I just purchased a HP2159 HD monitor, and hooked it up to my macbook pro via an HDMI cable, but there is no sound. Can anyone help me?

    Dan Waylonis wrote:
    does anyone know how to properly set up the audio cable?
    What do you mean by "properly setup?" There is no setup. Just plug it in.

  • My iPhone 3G has suddenly lost vibration and sound/ringtones(also does not change aspect when tilted). An incoming phone call can be answered but no sound is heard from the speakers9even though the caller can hear what I am saying). Any ideas?

    My 3G iPhone has suddenly lost all sound and vibration, it has also lost the "tilt" capability on-screen. An incoming call is registered without a sound, however, the caller can hear everything being said by me(whilst I hear nothing at all from his/her call).
    Any suggestions??

    *Update*
    I thought I had found the offending 'app' namely "Songpop."
    I regularly use "Songpop" on my phone late at night via my wifi connection.
    All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
    I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
    I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
    "Songpop" have now responded that "This is an issue to take up with Apple Support"  see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
    Hopefully someone at Apple can respond ....

  • Audio via USB displays input level but no sound is heard.

    I have a Roland System 1 synth that features audio via USB. I have installed the drivers, and the System 1 is showing up in my menu for system preferences/sound. When I select the System 1 as my input device, play the keys, and adjust the synths volume knob, the input level meter responds accordingly, showing that the Mac is hearing the output of the synth. However, I can not get the sound to come out of the speakers! The Mac's internal speakers are set as my output device, and they are turned up and working fine with all other audio.

    I have MIDI working fine in my DAW.
    I just can't get any audio to play through USB, which is a feature of the System 1.
    System 1 is set as my input device (driver has been installed) within system preferences/sound, I play the keys, and adjust the synths volume knob, the input level meter responds accordingly in the preferences window, showing that the Mac is hearing the output of the synth. No sound is heard.
    All other Audio/system sounds/itunes/etc. can be heard.

  • I recieve phone call from my iphone on my mac  but i can not make a call from my mac

    I recieve phone call from my iphone but i can not make a call from my mac What shall ido

    Then follow the steps here:
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    But basically make sure that iCloud is enabled with the same account in both your Mac and iPhone, turn off Wi-Fi calls if enabled in your iPhone and make sure that Facetime has the same accounts in your devices.

  • I currently have an ipad 2 that has weak strength in connecting to wifi. My kindle will connect from my upstairs, but ipad 2 will not. Is the ipad air better with connection strength?

    I currently have an ipad 2 that seems to be very weak in picking up wifi connection. I have a kindle that picks up the signal from my upstairs, but my ipad will not.  Does the air have better capability in doing this?  Would think of upgrading, as my ipad 2 also seems to be losing battery life quicker.  Thanks!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Hi , I just bought robert kiyosaki financial iq audiobook from ITunes but the sound stop after 5 minutes playing. Can someone assist me please?

    Hi , I just bought robert kiyosaki financial iq audiobook from ITunes from my iPad  but the sound stop after 5 minutes playing. Can someone assist me please?

    Have you tried copying it to your computer's iTunes via File > Transfer Purchases and seeing if it plays ok on your computer ? If it does then try deleting it from your iPad and then sync it back and see if it then plays. If not then you could use the 'report a problem' link from your purchase history : http://support.apple.com/kb/HT1933

Maybe you are looking for