Recipe and BOM

Hi,
i'm bit confused when it comes to recipe and BOM in a scenario where in there are multiple versions for a material.
how to find the BOM for a reciepe? what are the tables and the selection conditions.
Thanks,
dev.

Hi dev
You can get BOM and Master receipe information in MKAL table.
Hope this helps.
regards
Srinivas

Similar Messages

  • Subcontracing charges and BOM structure.

    Dear All,
    In the subcontracting scenaro , Subcontracting charges does't depends neither on  UOM of the material nor conversion factor is fixed of Material Base UOM with Pricing unit .
    for example , price depends upon the operation performd on sheet. If sheet is to be cutted into many peices , so on this sheet 5 operations has to be performed and price is fixed operation wise.
    Now confusion is
    1.)how to give  price in the subcontracting PO.
    2.) and what should be BOM structure in this scenario.
    Please suggest.
    Thanks & Regards
    Nitin Chhabra

    I assume from your question that you do not know the subcontractor price when you place the purchase order.  Based on this your subcontractor info record and BOM should reflect "typical values".  On placing the order you will need to find out the exact amount of material to be issued and manually adjust the purchase order BOM, then allow enough tolerance to except the variance in quantity received and invoice value.

  • Difference between Free goods and BOM (ERLA)

    Hi,
    Could any body throw some light on the Difference between Free goods and BOM(ERLA) to clarify my weired thought.
    AS of what i know is Free goods is 1:1 ratio.
    The main item will be prices and sub item will be free .
    Than same thing is also With BOM (ERLA)
    Regards,
    Venksys

    Hi Venksys
    Please note as given below :
    Free Goods : This function allows you to offer your customers a product free of charge in the form of free goods when a certain quantity of products is ordered. Free goods is a kind of quantity discount, and is granted in the form of a goods delivery that is free of charge when a certain quantity is purchased. There are Two types of free goods :
    1.Inclusive : The customer only pays for part of the goods ordered. The rest of the products are provided at no extra cost. For example, a customer orders  for 3 bottels but pays for 2 bottels  and 1 is supplied free .
    2.Exclusive - The customer pays for the goods ordered, and also receives additional products for free. The materials delivered as free goods will not be the same as that of ordered onces. For examples customer orders 5 bottels , but will receive 1 Bottle opener free.
    BOM : It consists  of 2 or more items combined and sold as an package : Example : Combination of 1 Tooth paste  + 1 tooth brush  packed as BOM.
    The Higher level Material ( BOM) is  not relevant for pricing but relevant for picking : The tooth paste and brush is relevant for pricing  and also can be sold independently : The Item cat group of the Header BOM material will be ERLA  and for Tooth paste and brush material the Item category group will have TAN.
    For more details , please refer to the  link below:
    http://www.sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
    Thanks and regards
    Veera
    Edited by: veera PV on Jan 24, 2011 9:06 AM

  • Control recipe and PI sheet creation creation

    HI frnds,
    Please explain me the configuration and  path of creating control recipe and PI sheet.
    thanks in advance
    Daniel

    HI,
    plz respond as earliest
    Daniel

  • I am looking an app to organized recipes and home decor info that I can use offline. Any suggestion?

    I am looking for offline apps for the iPad mini that will let me access my information when I am out shopping.
    I want to organize my recipes and home decor information in a very portable way so when I unexpectedly come across interesting items I can
    - in the case of food, see what other ingredients I need to make a recipe
    - in the case of home decor, have measurements and colours to evaluate the fit
    I downloaded springpad but my recipes are on their server.
    I downloaded Home Design I cannot see how I can add photos and ha curate colour swatches.
    Does anyone know of a good app?
    Thanks

    I did as much research as I could before downloading Springpad and Home Design but was not able to adequately assess these apps to see that they do not meet my needs.
    I would like to hear if someone has successfully found and used an offline app.
    I may just end up using Pages.

  • Q4_How to manage software material and BOM in SAP_High-tech Industry PLM Implementation Issues

    Hello,
    We are implementing SAP PLM for a high-tech company which designs and manufactures mobile phones (ODM). Since we are new in PLM consulting and we are facing with some implementation difficulties, we are looking for some solutions here.
    Question 4: How to manage software material and BOM in SAP?
    Currently, software are not managed as material in the BOM.  How to manage software material in PLM, can anyone help us with some suggestions.
    Question 5: PADS integration with PLM.
    Currently, customer is using Pro/E and PADS to design their product. SAP has already provided standard interface for Pro/E integration. But for PADS, there is no such interface. Because of the specialization of electrical components managed in PADS, different from structural parts in Pro/E, how to transfer them between PLM system and manage them in the PLM system has become an difficulty. We will appreciate a lot if anyone can share us with some successful solutions.

    Hi,
    software, typically a released version of software, is typically managed as a normal material master, and a related document with the code as a package (e.g. ZIP), if really needed.
    Software in development is managed typically with a dedicated Software Configuration Management tool like Rational ClearCase, Subversion, MKS Integrity, ....
    Regards, Ulf

  • Vendor and BOM Link

    Hi
    we have the requirement that
    if i give vendor code as input i should get all BOMs of that vendor as Output...
    wt is the table name to link between vendor and BOMs...
    Is there any function Module?
    can anybody give me brief idea to do this?

    Check these tables.
    PLPO,MDSM.

  • How to create items and BOMs using web services

    Hi All,
    I need to create, change and read Items and BOMs through web services (using SOA Gateway, right). I found this one here: "Process Item (convenience wrapper version)" or "Process Item" within
    Internal Name     EGO_ITEM_PUB
    Type               PL/SQL
    Product          Advanced Product Catalog
    Status          Active
    Business Entity     Catalog Item
    Right now, I don't know how to use it. If somebody has a simple example to create a single item, this would be perfect! Which one would be the right one to read detailed information about an existing item?
    The second object I need to maintain (create, change and read) is BOM. Which API can I use here?
    btw: I use EBS 12.1.1 on windows.
    Many thanks,
    Konrad

    Hi!
    Thanks for your quick answer but unfortunately, I must admit that I'm an absolute beginner with Oracle and EBS and so things like:
    Enable trace and generate the tkprof file or open the form using forms builder to get the name of the API used in thta screen.or
    Please check e-trm site for your question do not help me to much :-(
    Any other advice?
    Konrad
    Api's in EBS
    Re: Api's in EBS
    http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
    API
    Fixed Asset API
    List of API
    Re: List of APIs
    Regard
    Helios

  • Control Recipe and PI sheet

    Hi, All,
    Can I know what's the difference between master recipe and PI sheet? And what's difference between master recipe and control recipe?
    I know control recipe is generated from process order. What's the output of master receipe? But how to generate PI sheet? what's the PI sheet output?
    Thanks

    Hi,
    Master recipe will contain the Resources to be used and the duration of the process.
    Process order will generate control recipe. Control contains process Instructions.While creating / Releasing the process order control recipe will be created. It can be created automatically or manually. We shall discuss the manual creation.
    PI Sheet:
    process Instructions can be attached to the Master Recipe. Process Instructions assigned in master recipe will generate control recipe.
    Regards,
    Mohan

  • Control recipe and process messages

    Hi experts,
    When I create a control recipe and send to an external destination, is it going as an outbound IDoc from SAP to external system?.
    I have the same doubt about the process messages also. ie whether the process messages are coming from external system to SAP as inbound IDocs?
    Thanks in advance
    pradeep

    Hi Prathib,
    To realize data transfer between PP-PI and the control system, the SAP system provides the following alternative technologies:
    ·        Function modules
    ·        BAPIs (Business Application Programming Interfaces) that are defined as methods applied to SAP business objects and enable the standardized, object-oriented access to business functions in the SAP system. They are implemented as function modules, too.
    Follow the link below for further detail
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/12/3bc6f8504811d182c20000e829fbfe/frameset.htm
    Do let us knowi if you have any further query on the same
    Thanks
    Kaushik

  • LSMW to upload Material Characteritics and BOM info

    Hi,
    I am using LSMW to upload Material Characteristic and BOM info for the first time. It would be of great help if someone can provide me with an example with screenshots. Thanx in advance for your help.
    Sachin

    Hi Sachin,
    1) BOM and Classification Datacan not be uploaded together.
    We have Standard Programs available to these uplaods.
    BOM upload
    Object - 0030
    method -0001
    Program - RCSBI010(AUTOMATIC)
    Classification uplaod
    Object -0130
    Method- 0002
    Program-RCCLBI03
    http://www.megaupload.com/?d=578KUG4X
    please follow the link and download  the file.
    It has all the critical steps, screen shots, sample load file.
    let me know if it helps.
    Have fun,
    Satheesh.

  • MM and BOM

    Hi,
    I have a doubt in MM and BOM, If I have a material A and this one is sometimes In House and sometimes is in Subcontract, can I have 2 BOM´s and choose in some field in MM.
    Material A= C+ B
    Material A: MM->F/SM->BOM 1->IR
    Material A:MM -> E(In house)->BOM 2->Routing
    Material C: F/SM
    Material B: E In house
    Is possible?
    My problem is, i have to change often the BOM because the material change: in house to Subcontract and Subcontract to In house every week.
    Thank´s
    Lecticia

    Hi,
    For this, you can use Production Version Method
    Production version can be maintained in the material master(MRP 4) view
    Click on production version,you will get the pop up screen enter 3/4 digit version no &description
    Click on details button
    here give the routing(under planing data) & BOM information(under Bill of material)
    then click on check button to verify whether the entered data are consistent
    You can also maintain in C223 tcode
    If the production order is created by converting from planned order, system will auto select the PV. If you create manually then it will put a pop up box. Alternatively you can change the PV in the planned order.
    regards,
    sankaran

  • Multiple routing and BOM

    Hai gurus,
    1) My client manufacture whisky using process industry scenario.
    2) They produce whisky in bottling unit using either Auto line 1 or Auto line 2( work center)
    3) Also they select the BOM 1 or BOM 2( Old bottle or New Bottle) based on the availability.
    4) So for selection of BOM i had created the production version using old and new bottle.
    5) How to select the routing as it will be known only while converting planned orde to process order.
    6)  Actually i am selecting the BOM1 or BOM2(old or new bottle) based on the availability during partial  conversion of
         planned order to process order or by doing read pp master.
    7) If that is case how to select the routing  Auto line 1 or 2)while converting planned order to process order as it will known      only on the  begining of that day production.
    waiting for the positive reply
    regards,
    sekar chand

    Hai Kumar,
    Thanks for you reply.
    In Production Version we define the selection of BOM1 or BOM2( old or new bottle) based on the availability.
    But the work center Auto line 1 may be used under BOM 1 and BOM2 based on the capacity or avialbility of the line
    or Auto line 2 may be used under BOM 1 and BOM 2 based on the availabilty of the line.
    It that is the case how to create Production version and select the same, for work center and BOM
    waiting for the positive reply.
    Regards,
    sekar chand

  • Is there anyone who does computational physics using numerical recipes  and multi source programming in c

    is there anyone who does computational physics using numerical recipes  and multi source programming in c++

    On an iPad?  I'd have to say no, since you can't compile C++ code on an iPad.

  • Sales BOM and BOM

    Hi All,
    I was hoping someone could give me some information about Sales BOM and BOM.  How do they affect FI and or CO.  If anyone has any links or documents that i read about them id really appreciate them too.
    Thanks in advance,
    Noman

    Noman plesae read below from a previous thread
    Points will be appreciated
    Routing should define the production process, how to build the product from the BOM, so it is normal to have a routing having one or more operations each of which is assigned to a work center. Each workcenter can be assigned to a cost center and may have different types of activities that can be performed, each of which might have a different price at that cost center. This is how the routing, and hence the production order that has the routing will be costed when work is confirmed at the workcenter level, for the value added.
    Material costs can be costed per BOM (target) and based on actual consumption (actual cost). Apart from these, it is possible to have overheads defined too.
    Normally you should have a routing for the cost estimate with quantity structure. You can define one single dummy routing and assign it to any number of products, if you don't need it for any real work tracking (in case of a simple manufacturing process like kitting). That would significantly reduce your master data maintenance efforts.
    -Ram
    Ranganathan Sri...  
    Posts: 36
    Questions: 1
    Registered: 2/13/07
    Forum points: 48 
      Re: Bom and Routing   
    Posted: Mar 9, 2007 8:19 AM    in response to: Zaid M. Azam       Reply 
    Hi,
    Basically As you are aware BOM contains child parts of the parent material.
    Routing defines how you are going to produce. ie operations,
    If routing has say 3 operation steps you will define in the operation details where u will produce (work center) and time taken for each operation. Also you can maintain tools(PRT) for those operation and inspection datas(inspection time).
    Next details in work center(which you are assigning in operation.In work center you will maintain the link between activity type and cost center. Activity type is for example labour hour. In costing KP26 transaction a link will be established for activity type and cost center and corresponding cost.
    If you are using work center X having activity cost as 100 Rs/Hour. The system will calculate depending upon the time mentioned while confimation the cost.
    Hope this will help how routing,BOM and cost are linked.
    Please award points if this is really helpful
    Regards
    Ranga

Maybe you are looking for