Recipe.cpp

I get an internal error message invalid recipe type recipe.cpp(746) on opening Labview. The problem seems to stem from a vi I am working on but I can't seem to find any errors in it. Once I get into Labview, the vi runs fine but on closing and opening Labview, I again get the error message. I cannot find anything on recipe.cpp in the message board or the error codes page. I have not been able to reproduce the error on a simpler vi than the main one i am working on. I have attached the failure log.
Attachments:
lvlog02-14-08-15-10-342.txt ‏2 KB

This was reported to R&D (4769KHKQ) for further investigation.
It was closed because it couldn't be reproduced.
Could you please provide a VI to reproduce the error.
Aashish M
Applications Engineer
National Instruments
http://www.ni.com/support/

Similar Messages

[SOLVED] Recipe for target 'src/Interface/openxcom-ComboBox.o' failed

I've been having some problems with installing openxcom, most of which appear to come from a problem with yaml-cpp 0.5.2-2, and thus, the git file in the AUR (https://aur.archlinux.org/packages/openxcom-git/) was updated with a rollback yaml-cpp.
When I tried to build this package, there was an error involving some recipe.
CXX src/Interface/openxcom-ComboBox.o
src/Interface/ComboBox.cpp: In member function ‘size_t OpenXcom::ComboBox::getHoveredListIdx() const’:
src/Interface/ComboBox.cpp:245:9: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (-1 == ret)
^
cc1plus: all warnings being treated as errors
Makefile:5043: recipe for target 'src/Interface/openxcom-ComboBox.o' failed
make[1]: *** [src/Interface/openxcom-ComboBox.o] Error 1
make[1]: Leaving directory '/home/sailol/Downloads/AUR/openxcom-git/src/OpenXcom'
Makefile:7157: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
[1m[31m==> ERROR:[m[1m A failure occurred in build().[m
[1m Aborting...[m
After finding this post, I think it may have something to do with a header file that is missing, but I'm not sure.
Thank you for your time.
Last edited by Sailol (2015-06-08 01:00:46)

Mmm, the git package (maintained by me) frequently fails due to warnings since it's a developmental package. You can override the warnings by changing enable_werror to no in configure.ac (before you run autogen.sh in the prepare function).
sed -i 's:werror=yes:werror=no:' configure.ac
Should do it.
EDIT: I'd avoid the -git package for the time being, seems like a lot of stuff isn't getting installed correctly at the moment. I'll try to fix it up and upload a new PKGBUILD tomorrow.
Last edited by WorMzy (2015-06-07 23:08:29)

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error in visualizing a Data Form "WDEFGenerator.cpp"

Hi,
I have migrated an HFM application from version 4.01 SP2 to version 11.1.2.1
Everything works fine appart from an error in visualizing a Data Form:
In the previous version of HFM this error was not verified.
If I disable the option SuppressNoDataRows I get no errors but I would like to keep this option enabled.
Does anyone know what could be the problem?
The error I'm getting is:
Error Reference Number: {3783BC27-A47D-463A-9F21-5E1C2B55A775};User Name: hypadmin@Native Directory
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:11 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 1407;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 3284;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: WDEFGenerator.cpp;Line: 3166;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: CHsvWebFormGeneratorACM.cpp;Line: 3687;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:12 PM;Svr: BMI-2K8-HFMPA;File: CHsvWebFormGeneratorACM.cpp;Line: 3389;Ver: 11.1.2.1.103.3505;
Num: 0x80070057;Type: 0;DTime: 6/19/2012 4:41:11 PM;Svr: BMI-2K8-HFMPW;File: CHsvWebFormsACV.cpp;Line: 569;Ver: 11.1.2.1.103.3505;
And the data form script is:
ReportType=WebForm
ReportLabel=1_1_12_1
ReportDescription=Trade Receivables > 12 months
BackgroundPOV=S#ACT.w#<Scenario View>.V#<Entity Currency>.A#[None].I#[ICP None].C1#[None].C2#[None].C3#[None].C4#[None]
SelectablePOVList=Y{[Hierarchy]}.P{[Second Generation]}.E{GRBRA000.[Base]}
C1=C1{FL_CURR.[Base]}
R1=A#3_03_01.I#[ICP Entities],AddMember:I{CONS}
R2=A#3_03_01.I{CONS}
R3=A#3_03_02.I#[ICP Entities],AddMember:I{ASS}
R4=A#3_03_02.I{ASS}
R5=A#3_03_03.I#[ICP Entities],AddMember: I{PARENT}
R6=A#3_03_03.I{PARENT}
R7=A#3_03_04,NoSuppress
R8=A#3_03_1.I#[ICP Top],CustomHeaderStyle:font: bold,NoSuppress
FormRowHeight=20 px
PrintNumRowsPerPage=10
PrintNumDataColsPerPage=3
SuppressNoDataRows=True
ShowLabels=True
SuppressColHeaderRepeats=False
HeaderOptionAccount=ShowLabel,ShowDescription,Length:50
HeaderOptionICP=ShowDescription
HeaderOptionCustom1=ShowDescription
HeaderOptionCustom2=ShowDescription
Thanks
Best Regards

Hi
Check they have the "Data Form Write Back from Excel" role in Shared Services.
See p.133 of the security guide for more info -
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
Regards
jpr

CPP Assertion Error when navigating in Obiee 11g

Hi,
I have a report which uses SQL filters and I am trying to navigate from this report to another page.
And I see the following error :
Dashboard Display Error
Assertion failure: isXsiTypeSqlExpression(rExpr) at line 67 of C:\ADE\aime_bi\bifndn\analytics_web\main/project/webreport/exprformulautils.cpp
Error Details
Error Codes: ACIOA5LN
Some forums mentioned that re-creation of saved SQL filters would help but it didn't.
Has anyone faced similar errors ?
Thanks for any pointers.
- Sujana

Sujana,
This is a bug in 11g, apply patch 12561330.
Rgds,
Dpka

Error while deleting recipe

Hi Experts,
I am getting the following error "Task list 50000159 01 (type 50000159) is still used in inspection lots" while deleting a master recipe using t code C298.
Please note I am note getting any inspection lot where this recipe group is used (checked in MD04).
Is it possible to delete a recipe where there in open inspection lots? Because in this case all process orders are already given status TECO and inspection lots are generated mostly during inprocess.
Kindly give a solution to solve the above error.
Regards
Pradipta Sahoo

dear Friend,
1. go to C202, give material no and plant then enter
2. click on recipe header tab,click on article/ material assignment push button and see this recipe is assigned to any other material. if it is assigned then also deleting is not possible
3. if it is not not assined to other material, then u have to settle all the orders which were used this recipe. because if u set order to TECO is not enough, during settlement again it checks ur recipe
4. Do order settlement and close the order then delete the recipe
sree

After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the update says error, and ask to restart the system (it won't restart itself, so I waited 30 minutes, and then pressed the Power button for 10 seconds, to let it power down, and press Power again to power it up).
However, after that, the system failed to boot up, showing a
panic(cpu 0 caller .....)" "Unable to finder driver for this platform: \"ACPI\". ... xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:1504
This is not typical of the upgrade process. So I searched the Internet forIOPlatformExpert.cpp:1504 and some people said it is a hard drive error, but then I powered down and pressed Options when booting up, and was able to boot to Windows 7 (bootcamp)... and was able to boot to the "Recovery", which let me choose
Restore from Time Machine Backup
Reinstall Mac OS X
Get Help Online
Disk Utility
what should I do now to fix it so that it can boot again?

This error is caused by one of the updates you applied, namely the Thunderbolt Software Update 1.2. Many people have been affected by it, including me. I did what Linc Davis has suggested above to fix it. The most extensive discussion about the problem, with ways to fix the problem, is here:
https://discussions.apple.com/thread/4020399?start=0&tstart=0

Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
"Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
(Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
Regards
Jouni Juntunen

CS4 Adobe Media Encoder & FMLE are two different softwares - you can post your query here:http://forums.adobe.com/community/ame

Adobe Media Encoder CS4 Error: WinFile.cpp-754

When encoding video from one format to another (no matter what is source and what is result file format) I have an error after some time or in the begining of the process. "Adobe Media Encoder has encountered an error ..\..\Src\Win\WinFile.cpp-754"
Version of Encoder is 4.2.0.006 (updated).
I can't encode any files. What is the problem?

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder Error with MPEG2 Formats [../../src/Command.cpp-2519]

I am trying to use some of my presets using MPEG2 format and it is giving me this error: [/Volumes/BuildDisk/builds/ame602_mac/main/app/frontend/prj/mac/../../src/Command.cpp-251 9]. I try the system presets that use MPEG2 and I get the same error. I notice if I try to make a new preset, I do not even have the option to choose MPEG2. I only get MPEG4 or MPEG4 (Legacy). I am using AME 7.0.2; if anyone has an idea on why I can't use MPEG2 please let me know.
Thanks,
Mike

Hi mboory,
Please mention the exact version of Media Encoder CS6 that you are using and also the version of operating system. Please check the below link as well.
http://forums.adobe.com/message/4402558
Regards,
Vinay

Adobe Media Encoder error when encoding: winfile.cpp-759

Mods: Please move this to the appropriate thread wasn't sure to move it to Premiere or Flash
I receive this error when trying to encode AVI to H.264 using Adobe Media Encoder CS5 (64bit):
When searching through the forums, several suggestions for CS4 and current releases that I have tried are:
clearing the media cache through AME, and the folder location in %APPDATA%\Adobe\Common\
installing K-Lite Codec pack
changing the media cache files folder to a separate disk entirely
updating to the latest version (at the time of post ver 5.0.1.0)
uninstalling and re-installing AME (as an error might have occurred during updates)
verifying that the CPU has SSE support and is enabled
I expanded my search to google which gave similar errors (winfile.cpp-754, winfile.cpp-758, etc.) and a few responses were uninstalling any Nero products (don't have any burning programs on this computer - unless you count Windows)
The system that I have is:
MS Windows 7 64-bit
Intel Core 2 Quad Q6600 @ 2.40GHz
2x 1.0GB Dual-Channel DDR2 @ 800MHz
512MB GeForce 9600 GHz
2x 250GB HDD Mirrored
External USB 500GB HDD
Any ideas as to what the cause of this is?
LK.

The information about installing codecs packs is true. It usually does more damage to your codecs already present with software already installed on your computer, and the registry settings even after removing it. That is why it is in good practice to do full image back ups monthy, saving the latest 3 for when I utilize last resort methods such as codec packs.
Adobe CS5 software has been working fine on my computer ever since its installation July. I forgot to mention that I have successfully used Premiere Pro CS5 for editing a dozen files ranging from SD small res to HD 1080i. This also includes just using AME CS5 itself for transcoding files for supported playback on different devices. I notice a greater difference in speed when using a more up to date machine that uses a GTX 285 card for GPU playback - a lot faster and smoother.
I have a 2nd, slightly older computer, that houses an extra drive I put in there to use as a scratch disk. I occasionally add that disk to the computer that has CS5 currently installed as a scratch disk for editing video. The external USB drive is used to store the final product and my backups.
This error has only come up 1 time out of the 49 files I have encoded that usually run 10 minutes to 1.5 hours. I had 9 AVI files in the encoding queue and it always stopped at this 1 particular file. I skipped the file and encoded the rest successfully, but I want to know why it causes an error in AME because this has never happened before. I have even used it on a more up-to-date machine spec wise, thinking that there is a 1% possibility that it doesn't like my computer. The same error was produced. The 9 files that I did encode are roughly the same video and audio format - just this one is the error.
I gave the file to my friend who was supposed to analyze before I got home - I usually assist them in PC problems and built his better-than-mine PC.
Any other suggestions for this error and/or a solution?
Lk

Adobe Media Encoder error [..\..\Src\RenderFrame.cpp-199]

Adobe Media Encoder error [..\..\Src\RenderFrame.cpp-199]
I'm trying to utilize Prelude to actually TRANSCODE some R3D material. Since R3D clips are spanned, Prelude can 'reassemble' them. (I don't understand why AME can't do this since Prelude uses AME... but...)
I get this error when trying to start the transcode in Prelude... any help out there?
Thanks!

Hi mboory,
Please mention the exact version of Media Encoder CS6 that you are using and also the version of operating system. Please check the below link as well.
http://forums.adobe.com/message/4402558
Regards,
Vinay

Hi Team, I am new for SAP PPPI. Looking for guidline to adopt the SAP standard recipe formula

I am working with Pharma company having API scenario.
Here in BOM we have maintain the API quantity as 100% dry where as we received it in moist form. After sampling we come to know the moisture contain & assay contain. This value is stored in table driver directly from QA32 usage decision. We have maintain the classification view with moisture & Assay in %. for every batch the % moisture & Assay is different. Now i want to adopt the recipe formula for API calculation. The formula for calculation is as per below.
=(Bom Component Qty* Moisture contain %- Bom Component Qty* Assay%)/100
Please guide me with screen shot, how i can map it in recipe formula...

I am working with Pharma company having API scenario.
Here in BOM we have maintain the API quantity as 100% dry where as we received it in moist form. After sampling we come to know the moisture contain & assay contain. This value is stored in table driver directly from QA32 usage decision. We have maintain the classification view with moisture & Assay in %. for every batch the % moisture & Assay is different. Now i want to adopt the recipe formula for API calculation. The formula for calculation is as per below.
=(Bom Component Qty* Moisture contain %- Bom Component Qty* Assay%)/100
Please guide me with screen shot, how i can map it in recipe formula...

What is memory.cpp at line 1038?

We have been running the same test in LabVIEW for a few years. Now all of a sudden, we are starting to get a memory.cpp error at line 1038. The test normally runs days at a time (~2 weeks), but we are getting this error after about 18-24 hours. Any ideas of what could cause this? Could this be caused by any Windows XP hotfixes? We are using LabVIEW 7.1 on a windows xp machine.

I've already checked out that particular site for info. And we do open and close files in our tests. And we do have quite a few loops. But it has worked with no issues for a few years and much longer time spans (and also more open/close files and loops). So after the error occurred on our only two machines (with exact set up) that run LabVIEW 7.1 (the rest are still on 6), we rolled one back to a date before all of the hotfixes occured and we have had no problems since. The second machine had an issue with rolling back so IT came and reinstalled XP. The problem is that they install an updated version and we cannot install an older one. It has Service Pack 3 in it and I think there are some hotfixes that came along with it that are the source of the problem. But I can't gaurantee it. Hopefully we'll figure it out soon.

Master recipes operations not getting transfered in SNP PDS to APO from R3

Hello APO Gurus,
I am trying to transfer SNP PDS for master receipes from R3 to APO.
Issue description::
The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
i have following points:
1. Is there some customizing setting missing on R3 or APO side for plant 1000 tbefore SNP PDS transfer
2. What need to be checked on master recipes data in R3,
i have checked on below points
1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
2. BOM & Routing and Production Version setup correctly.
3. The Routing Operations have to Relevant to 'SCHEDULING'.
4. Try deleting the existing Integration model for materials & re-create new IM & activate.
Please help me to send SNP PDS correctly to APO to take heuristic run.
Regards
Gajendra
Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

Hi,
It is good that you have given your already checked points.
Please check the following things also and try to retransfer the PDS.
1. Check your resource in ECC, whether you have maintained the Process formula.
2. Check you have maintained some values in Master Recipe for processing time
3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
Hope this will help you to solve the issue.
Regards,
Manimaran M.

Recipe.cpp

Similar Messages

Maybe you are looking for