Recipe data migration from 3rd party system to SAP Recipe Management

Dear All,
Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
Thanksa lot  in advance,
Regards,
Achyuta

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

Similar Messages

  • Data interfacing from 3rd party system to SAP

    Dear all,
    We are going to upload employee masters, including actions, org assignment, personal information and other infotypes from a third-party system to SAP HCM.  May I know what should be the best approach, e.g. BDC, BAPIs, for these kinds of data interfacing?  I am thinking to use....
    BDC for hiring/transfer/termination actions (besides BDC, any other approaches?)
    RH_INSERT_INFTY or RH_UPDATE_INFTY for personal information / other infotypes updates
    However, I have no idea on how to automate updates of OM.  Please kindly share your thought, thank you!
    Best regards,
    Anne

    As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

  • How to import payroll result from 3rd party system to SAP

    Hi Experts,
    May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
    i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
    Thanks.

    check this link
    http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

  • Migration of Documents from 3rd party software to SAP DMS

    Dear Experts,
    We have implemented SAP DMS . Prior to DMS we were using Third party software for creating and storing the documents.
    There are abot 3000 documents in the third party software, now the challege is how we  must have to migrate the DATA from 3rd party software to SAP DMS with creating Dirs. Are there any upload programmes suffice the requirement or any development needs to be done or any possibilities.
    Kindly help me out in the above scenario.
    Regards
    jayanth

    Hi,
    from DMS point of view I think that SDXA functionality could also be useful for this action. For further information on SXDA functions please see SAP note 817743.
    Best regards,
    Christoph

  • Item master synchronisation from third party system to SAP

    Hello ,
    I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
    We have implemented Catalog functionality.  Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
    Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
    How does we can make this synchronisation? What are the possible solution for this?
    You valuable inputs will be highly appreciable.
    Regards,
    Prashant

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Data migration from 4.7 system to ECC 6.0

    Hi All,
    I am a Solution Architect. Currently working on a typical pursuit requirement. the requirement is as below:
    One of our customer is currently on SAP 4.7 system.  Their current system is shared by 2 companies & the companies got demerged now. Hence they are palnning for fresh ECC 6.0 implementation & migrating Master data & transactional data related to this customer from the current 4.7 system to ECC 6.0.
    I am seeing possible way for data migration is through ALE or LSMW. But I am not confident about the execution plan & process.
    I would wish to know from you people is:
    1. The different methods to do data migration from 4.7 to ECC 6.0 with pros & cons
    2. How to plan for data migration
    3. Risks & mitigations during data migration
    4. different kind of skill set & duration required to accomplish this requirement
    Currently we are planning for 6 months for the ECC 6.0 core modules implementation.
    If you have undergone this kind of project then request you to share your experience. Any information on this regard is appreciated.
    Thanks & Regards,
    Suresh

    Hi
    Go through eh below link for Best Practices
    http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
    [Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
    [Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
    [Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
    Regards
    Pavan

  • Data Extraction from Third party system to BW System issues...

    Hi Experts,
      I would like to know about data extraction issues from third party systems like hyperion or DB2 or Sysbase to BW system, proper procedure to minimise risk facors, etc.
    I hope hear from you soon...
    Thanks in advance....
    Regards,
    Nagendra KReddy

    Hi,
    Below is a document for DB connect. in that frequent problems also mentioned.
    Create DataSource for DB Connect step by step
    -Sriram

  • Handling load of data in PI - third party systems to SAP R3(Idocs)

    Hi,
    Request your help in addressing the below issue:
    PI (PI 7.0) is receiving a huge load of messages from third party systems at one point of time and it is creating Idocs and dispatching the Idocs to SAP R3 system.
    Since the load that is being received by R3 is more than the work processed available in R3 system, the Idoc processing is being set as a background job which inturn is creating spool requests in R3 system and this is leading to spool overflow issue.
    Is there any possiblity to control the dispatch of Idocs from PI system, say, the Idocs should be queued up in tRFC of PI until the work process in R3 system would be available.
    Please suggest any other possible resolutions to resolve this issue.
    Thank you.
    Regards,
    Subbu

    >>Please suggest any other possible resolutions to resolve this issue.
    Modify idoc occurences and send individual idocs could solve your problem
    Check Michal blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Idoc packaging suggestion given in this thread
    Re: XI/PI: Receiver IDOC adapter packaging
    Edited by: Baskar Gopal on Mar 25, 2011 12:52 PM

  • Querying Data from 3rd Party System

    We would like to query data from a 3rd party (non-SAP) system.  Our BW is an MSSQL DB and the 3rd party is also an MSSQL DB.  We do not want to physically load the data from the external system we just want to use the BW query tools to display the data.
    Is this possible?  I thought this is what a Remote Cube would be used for but SAP's instructions on Remote Cubes are vague and confusing.
           1.      In BW, create a source system for the external system that you want to use.
           2.      Define the required InfoObjects.
           3.      Load the master data:
    ·        Create a master data InfoSource for each characteristic
    ·        Load texts and attributes
           4.      Define the RemoteCube
           5.      Define the queries based on the RemoteCube

    Hi Jon,
    SAP RemoteCube is an InfoProvider. This is a special RemoteCube that allows
    you to define queries with direct access to transaction data in other SAP systems. SAP RemoteCubes are defined on the basis of an InfoSource with flexible updating, and assume the characteristics and key figures of the InfoSource.
    Use/Data Flow
    Unlike with other RemoteCubes, it is not necessary to program extractors. The
    same extractors are used to select data in the source system that are also used when replicating data into the BW. When executing a query, each navigation step sends a request to the extractors for the assigned source systems. In addition, characteristics selection and selection criteria for these characteristics are transformed to fields in the transfer structure, in accordance with the transfer rules. They are transferred to the  extractor in this form. The delivered datasets run through the transfer rules in BW and are filtered once again in the query.
    In your case Remote cube can be an option .
    Cheers
    Raja

  • Error is data loading from 3rd party source system with DBCONNECT

    Hi,
    We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
    After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
    The connection is working OK and we can see the tables in the source system. But we cannot load the data.
    The error in the monitor is as follows:
    'Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.'
    But, unfortunately, the error message has no further information.
    If we look at the job log in sm37, the job finished with the following log -                                                                               
    27.10.2009 12:14:19 Job started                                                                                00           516          S 
    27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S 
    27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S 
    27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S 
    27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S 
    27.10.2009 12:14:24 Job finished                                                                                00           517          S 
    In a BW 3.10 system, there is no  message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
    Thanks in advance,
    Rajib

    There will be three things to get the errors like this
    1.RFC CONNECTION FAILED
    2.CHECK THE SOURCE SYSTEM
    3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
    4.CHECK I DOC PROCESSING
    5.FINALLY MEMORY ISSUES.
    6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
    7.LAST IS MEMORY ISSUE.
    and also Check the RFC connection in SM59 If  it is ok then
    check the SAP note : 692195 for authorization
    Santosh

  • Irec : Data migration from Third party tool to Oracle irec

    Currently we are using 3rd party tool for the recruitment procee. Now ee are moving to Oracle Irec.
    Already we have huge data in current system for the vacancy (around 500 vacanies) and corresponding applicant applied for the vacancy. How can we migrate the data from current Sql server to Oracle Irec. Any webadi available??
    Thanks,
    Siva

    As my understanding there no seeded webadi is avaiable for same reference.
    you can designed conversion program or custom webadi for this purpose. PER_VACANCY_API API will help for Migrating the Data in Oracle.
    Thanks

  • Data upload from third party system to GRT table.

    Hello,
            Can you please let  me know how we can upload payroll data from a legacy system (to be more clear, how to upload data that we receive from a third party system) into GRT table. 
    Note:The file should be tab delimited text file.
    As of now, i figured out 2 FMs which I thought can be used.....BAPI_EXTPAYROLL_INSERT_OUT and BAPI_EXTPAYROLL_INSERT_LEGACY.
    Please let me know the steps to upload the same (start to end).  A code snippet will be of much help to me.
    Regards,
    RK

    Are you looking for loading your legacy payroll data into SAP ?
    SAP have a standard tables (T588B & T588C) that can be used along with standard schema (XLK0) for updating payroll results.
    They also have a utility program to upload data into T588B & C.
    Search for  Legacy Data Transfer in IMG and yo will find the relevant steps.
    Regards
    Ravikumar

  • Mass Data upload in SAP from 3rd party system

    Hi Experts.
    Can anyone help me how to do mass data upload in SAP. Actually, when any new joining is done, a form is being filled by employee(joining form), and that data is finally updated in SAP manually using various infotypes. Now, i m planning to make that form available in webpage. The employee will go to the webpage, fill the data , also the HR will fill the required fields, and once the form is complete, the data will get updated in SAP, in resp. infotypes. Like personal details in infotye 2, address in infotype 6, bank details in 9 and so on, in a single shot. Is there any BAPI or something like that, using which this can be achieved.
    Thnx
    S Kumar

    You can try BAPI_BANK_CREATE for IT0009, BAPI_ADDRESSEMP_CREATE for IT0006 and BAPI_PERSDATA_CREATE for IT0002. Otherwise, you can also use FM HR_MAINTAIN_MASTERDATA to create any infotype.
    Have a look also at the Life and Work Events functionality in SAP Portal (http://help.sap.com/erp2005_ehp_04/helpdata/EN/f6/263359f8c14ef98384ae7a2becd156/frameset.htm)

  • Can PU12 fetch results from 3rd-party payroll systems?

    Gurus:
    We have configured PU12 to export master data or master/payroll data to 3rd-part systems.
    Could you tell us how to fetch the results from external 3rd-party systems back to our ECC system?
    Thanks!

    Hi Ashley,
    You can import the wage types from 3rd party systems into SAP. Then you can run the payroll in SAP system.
    Check the following description taken from help.sap.com.
    You use the Import wage types function to transfer wage types from a third-party system to the
    payroll results of the SAP System.
    For more information, see the Implementation Guide (IMG) for Cross Application
    Components under Predefined ALE Business Processes   Human Resources 
    HR External Systems   Connection With an External Payroll System   Import
    Payroll Results or in the SAP Library under CA Cross Application Components 
    Business Framework Architecture (CA-BFA)   Library of ALE Business Processes
      Human Resources   Human Resources - External Applications   Process Flow:
    Import Payroll Results from a Third-Party System [Ext.].
    Starting the Import
    Prerequisites
    You have successfully run payroll in a third-party system.
    Procedure
    1. In the menu, choose Import wage types   Create IDocs.
    You access the IDoc Inbound Processing Via File screen.
    2. In the Complete file name field, enter the name of the input file.
    3. Choose Execute.
    The system message contains the number of created IDocs.
    4. In the menu, choose File   Import wage types   Create IDocs.
    You access the Inbound Processing of IDocs Ready for Transfer screen.
    5. Enter MANAGEREXTPAYROLL_INSERTOUT as the Message type and, if required, enter the
    Creation date and the Creation time.
    6. Choose Execute.
    Result
    The wage types created in the third-party system are available for further processing in the
    interface tables of the SAP System.
    You can then start payroll in the SAP System and perform the subsequent payroll activities:
      Create a remuneration statement
      Run posting to Accounting
    Regards,
    Dilek

  • AR & AP Data migration from legacy

    Hi,
    1.What are the precaution to be taken for Data migration from legacy system?
    2.We intend to use a conversion ac ( Dr conv ac cr Vendor ) Is it Correct way of doing it ?
    3.How do i ensure that all my invoices uploaded correctlt ?
    4.What is the best Standard program to get it doen ?.
    5.Is LSMW is best to do it or shall I have to go for custom development?
    Any piece of yr advice is appreciated.
    Thanks, Chitra

    Hi Chitra,
    Following link are helpful in understanding LSMW:
    Note 105244 - LSMW 1.0: known problems, tips and tricks
    Re: LSMW and error handling
    /community [original link is broken]
    For Data Migration:
    Note 400257 - Data Migration and Upload Report
    Note 739860 - Data migration from a legacy system to SAP
    Hope this helps.
    Please assign points as way to say thanks

Maybe you are looking for

  • BI Publisher 11g. Plotting multiple lines in a line graph

    Hi, We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem. I have 3 mterics: Month (which will be X-

  • Video doesnt play propertly on iPod

    I've downloaded a music video off iTunes, and even though it appears on my iPod, under the music videos section, it wont actually play anything. When I click to play, it goes to a black screen, and when i click the middle button, the "time passed" di

  • Default Profit Center to Customer Account.

    Dear Friends, We have posted an FI Document using T.code FB70. After the document in posted, I have checked in T.code FB03. For Customer Account, Profit Center is defaulted . EX: for Customer Account is 40, Profit center 99,0000 is defaulted. Why thi

  • Tried to update, now nothing works

    Any ideas... My wife tried to update her phone last night and it appears it's broken. All we get is an image of the iTunes icon and a USB cord. Nothing happens. I have tried to do a hard reset but still nothing. Can someone give me a "step-by step" o

  • UIX: align left

    Hi, I want to align the rows in the tables of input_form, master_details, search (creteria) left. the prompt is align right and the and the inputfield left. I just want them to be aligned left. hope to hear from you soon.