Recipe Management- BAPI_BUS1077_CREATE - Restrictions do not apprear

Hi,
I'm using BAPI_BUS1077_CREATE to create a specification in the SAP Recipe Management Module, but, the values for 'Rating' and 'ValArea' do not get populated in the 'Restrictions' tab of the Specification header.
Please advise.
Thanks,
Shalabh Jain

Hi Shalabh Jain,
Then I think, you should check the content of the table sub_tab_wa-usage_tab in the BADI (BAPI_BUS1077_CREATE).
Please check the settings of the parameters during the bulding of the header usages. There are some different options.
Best regards,
Roland

Similar Messages

  • Recipe Management error while creating Recipe

    Hi,
    While creating recipe in Recipe Management (Tcode: RMWB), in the process tab, I am unable to create a STAGE no.
    When I try to create stage (4 digit numeric) it gives me an error message "Change number 500000000000 does not exist"
    Long text of error message
    Diagnosis
    One of the following situations caused the error message:
    1. You want to edit a BOM or routing using change number 500000000000.
    2. You entered change number 500000000000 in order to display or change the change master.
    Change number 500000000000 which you entered does not exist in the system.
    Procedure
    Check your entry. Correct the change number if appropriate.
    Please help in solving the above issue.
    Rgd,
    Jag

    Hi Jag,
    Are there recipes in the system (after an upgrade)?
    When you start with the recipe management  the system create automatically a dummy change number (with the profil setting RCP01). The change number  is stored in the table RCPC_AENNR; to read the change number , please use the function module  RCP899_DUMMY_AENNR_READ.
    If the change number 500000000 the dummy, please correct the settings of the change managment if the change number is missing.
    Best regards,
    Roland Freudenberg

  • Linking DMS to a Content Repository for Recipe Management

    How do I link a document type to a content repository?
    This is for Recipe Management. When I look in DC10 I can see that there is a document type of RMS for Recipe Management.
    I assume this means Recipe Management is connected toDMS
    I have created a content repository ZRM using OAC0.
    How do I make the link between the document type RMS in DMS and the content repository ZRM?

    Thanks for the reply but it isn't really what I was after.
    I am only the basis guy so I am not sure of the application but my expectation is that users will save a document with a document type of RMS. This document should be saved to a Content Repository
    What you have described is how to save a type of document such as MS Word to a particular repository. I was hoping that Recipe Management documents (possibly MS Word, possibly not) would go to a Recipe Management Repository.
    There still might be the possibility that documents (possibly MS Word) for other projects e.g. packaging could be written to a different repository.
    What I am hoping for is a link from the document type RMS in DC10 to the Content Repository defined in OAC0.
    I have a suspicion this is via the category defined by OACT.
    The link from SAP DMS to Content Repository seems fundamental to me. I am surprised no one has the answer
    ...or perhaps I have completely missed the point?
    Tony

  • "Restrictions Do Not Allow Explicit Content"???

    Downloaded a few podcasts yesterday.  Listened to one of them on the ride home last night (from my iPhone, after syncing).  Tried to pick up where I left off this morning, and these particular podcasts are "grayed out" and, when tapped, say "Content Not Allowed.  Restrictions do not allow explicit content".  I checked my iTunes preferences (Parental), nothing is checked, no restrictions.  These are the very same podcasts I was listening to 12 hours ago!  And they play fine on my computer, within iTunes.  Just won't play on the iPhone after syncing.  And it's just these podcasts (Start Up by Alex Blumberg -- far from explicit or pornographic).  All the others are playing fine on the iPhone. 
    Any ideas? 

    I do not understand why APPLE is making it Rocket Science to protect our kids from this por-nography through their Store.
    I have been in a dialgue with APPLE now for 2 weeks about the APP's that continue to come up, and researching further their podcasts also. They continue, as recommended here, to suggest that you complain to the a feedback link that, unfortunately, ends with a thank you and we will not be contacting you personally about this.
    My suggestion is that you go to one of their 24 hour response links, here is one! (http://www.apple.com/support/itunes/contact.html?form=app_store&topic=App%20Stor e&subtopic=Downloading%20and%20updating%20Applications) and complain there. It is their respondsibility to manage their content.
    The other suggestion is to notify everyone you know of your issue with APPLE and encourage them to also notify APPLE!
    Everyone that I have notified is equally dissatisfied with APPLE.
    Shame, we have to go so far to get APPLE to do what's right!

  • "access restrictions" did not work sometimes when using 3-tier DeskI.

    My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
    But this issue can be solved by logging on from another machine, or restarting the DeskI.
    For I can reproduce this issue, so I just want to know that:
    1.What is it probably related to?
    2.If this issue happens again, what can I suggest my customer for tracking it?
      For example, get some log files from servers etc.
    Thanks!

    Hi Sarah,
    Also you can try the following solution.
    1. Import the universe.
    2. Go to manage access restrictions
    3. Remove the restriction .
    4. Again create the rescrition and unchecked the " limit size of result set to"
    5. Now assign it to the unlimited results group ( this is the name of
    the group we have given to those users who should be able to retrieve
    more than X rows)
    6. Now we save the universe. (Dont export the universe).
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • BAPI or Fuction Module name for Recipe Management (tcode RMWB).

    Hi All,
    Please can anyone let me know a bapi or a function module name to map the transaction RMWB (Recipe Management Workbench).
    Thanking you in advance for your reply.
    Regards,
    Chirag Mehta.

    Hi Pavan,
    Thanks first for Replying.
    Sorry that i did not specify the details of the requirement before.
    My requirement is that i have to either change an existing formula or create a new formula for the recipe.
    Can you please advice me on any FM or Bapi for this requirement?
    Regards,
    Chirag Mehta.

  • Recipe Management - Composition of an Output Substance error

    Hi all,
    I am trying to implement recipe management best practice for demo purposes and have come across an error with composition output of substance in which I need some help.
    The BPP doco outlines that by choosing the Composition tab and selecting Calculate template Values that the system inserst the caculated quantites for the composotion items of my recipe.
    However when I click Calculate Template Values I get the following error in the log:
    System of equations calculation tool could not be instantiated
    Message no. FRMLCALC030
    Can someone please help in how I generate the copmposition of the output substance?
    Thanks in advance,
    fforster01

    hello,
    At Recipe Management message No. FRMLCALC030 is meant to acknowledge
    that there are EH&S Easy Expert connection issues, and since formula
    explosion uses Easy Expert for calculations, it should be running
    and available via RFC connection 'EHS_EXPERT'.
    For more information on current installed EH&S Easy Expert, see the
    Set Up Easy Expert on following IMG activities :
      o EH&S > Basic Data and Tools > Tools > EH&S Expert
             > Set Up EH&S Expert
        This is a link to the corresponding EH&S customizing that
        explains setup of EasyExpert (depending on the used R/3
        release the customizing path may be different).
      o Production Planning for Process Industries > Master Data
             > Recipe Management > Set Up EH&S Customizing:
               Section: "Basic EH&S Settings"
    If EH&S Easy Expert is already setup and running, please check the
    RFC connection using transaction SM59. Whereas this connection is
    running properly, then you may check whether environment parameter
    EXPERT_DEFAULT_DESTINATION ('EHS_EXPERT') is linked with this RFC
    destination.
    Moreover, referS to documentation found on note 568302 for further
    information to update the EHS Expert as well as to the document:
    "Establish_the_EHS-Expert_Server" on the attachment.
    regards,
    Jane

  • Recipe Management: Some Questions

    Hi,
    Currently I'm working on the recipe management and have some questions, hope you can help.
    I could solve most of my previous questions, but now there's a new one.
    If I click in the formula view, register (i. e.) composition on the button "Transfer to Spec. of Pr. Output" or "Calculate Template Values" I'm getting a dump:
    "When calling the function module "FRML565_WRITE_PO_TO_EHS", one of the parameters needed according to the interface description was not specified. This parameter was "IO_OBJECT"."
    Any idea what's going wrong?
    Thanks,
    Tan
    Edited by: Tan Yildiz on Mar 22, 2010 4:50 PM

    Hi All,
    Please give me some examples to explain FILLPV. so that it can help me to understand easily.
    and how many ore there origin statuses are there in SAP.
    What is the INTKY operation why we are using that?
    How we can delete the Time Evaluation Results?.
    Thanks.

  • Recipe Managment - Base Unit for Nutrient

    Hi,
    I am currently setting up Recipe management master data and am experiencing a problem with Base Unit for Nutrient. I am able to see the field Base Unit for Nutrient and even drop down on it but the field is not available for input?
    I have checked the following: The "Base Unit for Nutrient" entry is assigned to the Value Assignment Type "SAP_RMS_1011_001" (IMG: Specity Value Assignment Types) and has the class "SAP_RMS_1011_001" assigned with Value Assignment Category "A" which has the Tab Pages "REL, SOURCE, USAGE and VAL". The specification type is Nutrient. In the IMG Activity "Property Tree" the RM_Nutrient is maintained with the Value Assignment Type "SAP_RMS_1011_001".
    I have also checked Table based value assignment in IMG and have the following entries:
    SAP_RMS_1011_001 1 OBJID_STDVAI_SORT SVA 1 5
    SAP_RMS_1011_001 2 OBJID_STDVAI_ASSESSMENT SVA 2 3
    SAP_RMS_1011_001 3 OBJID_STDVAI_STATUS SVA 3 4
    SAP_RMS_1011_001 4 OBJID_STDVAI_RELATION SVA 4 4
    SAP_RMS_1011_001 5 OBJID_USAGE USA 5 30
    SAP_RMS_1011_001 6 SAP_RMS_1011_001_VALUE CHA 6 22
    SAP_RMS_1011_001 NUTRIENT 0 UOM FOR NUTRIENT CHA 1
    Can anyone please tell me what I need to do to make Base unit an input field?
    Thanks in advance,
    Fforster01

    Hi,
    Please check in the IMG acticity 'Set Up Table-Based Value Assignment' the table entry (column 5) for the valuation type SAP_RMS_1011_001, object SAP_RMS_1011_001_VALUE. Is the indicator 'editalbe' marked?
    Best regards,
    Roland Freudenberg

  • Recipe Management- Substances Description needed

    Hi all,
    I am working on Recipe Management Report...
    I need to download the substances used in a recipe and their description...
    I am able to download the substances but i am not able to get the description of the substances
    Can anyone help me on how to get the description of substances...
    Thanks
    Harsha

    hi harsha ,
                      How are you doing , i am venkat iam newly learning recipe management, i need some help you got any material or any kind of examples on recipe management please sent to
                        [email protected]  , with your contact number so that i can be in constant touch with you .

  • Recipe Management Security

    Is anyone restricting access to specific Recipe Management (RM) objects (specifications and recipes) by a project designation and/or team composition?
    We are using role-based security along with authorization object and sub-object settings within RM.  Up until this point, a given role would be authorized to display and edit substance specifications for example.  Now, we have a limited sub-group of people working on a super secret project and only want these people to be able to display and edit the specific substance specs created for the project.
    Any ideas or tips and tricks would be welcome.  Thank you for your help.
    Beth

    Beth,
    You may want to create another authorization group. Then assign specific user/s or role/s to this authorization group.
    hth,
    Mark

  • Recipe Management within SAP PLM Core 7.1 EHP5 system

    Dear All,
    I am working in a EHP5 system - Recipe mgmt. i am looking for documentation regarding configuration, end user training and OKP files for this new Recipe management
    Thanks in Advance
    yasar

    Hi Gurunadh Kumar
    It is not easy to read your question, anyway I made it and let me try to summarize it before providing your the solution:
    Reproducing steps when configuring the webservices(SAP ME) in CE 7.1 EHP1.
    1. Log on to SAP NetWeaver Administrator Console by launching the following URL: http://:/nwa.
    2. Choose SOA Management Application and Scenario Communication Single Service Administration .
    3. Search for the Web service: Eg. BOMProcessingIn
    4. Select port type
    5. In the bottom window, select associated ServicePort
    6. Choose the Security tab.
    7. Choose Edit.
    8. Select the Transport protocol.
    9. Check the UserID/Password under HTTP Authentication.
    10. Save while saving I am getting an error :
    A problem in the backend.Please refresh the UI. Log Message:  Message:
    [EXCEPTION] com.sap.esi.esp.admin.ui.helper.exceptions.TechnicalException:
    Problem occured at the backend. Please refresh the UI.
    I have checked through the exception stack traces, this should be caused by the patch level inconsistency between the following
    components on your CE7.11 system:
       - ESP_FRAMEWORK
       - ENGINEAPI
       - J2EE-FRMW
    To resolve this problem, please download the lastest patch for all the above software components as per the current SP level,
    and deploy them to your system, then try the same steps again.
    Best Regards,
    Thunder
    Edited by: Thunder Feng on Sep 22, 2010 10:52 AM

  • Landscape for implementing Recipe Management

    Hello All,
    Can someone kindly guide me as what's the recommended Landscape for Recipe Management, for example should two different ECC clients should be mantained ?, Recipe Management Recipes/Specifications stored in first 'source box' and Supply Chain data like BOM and Master Recipe stored in target box (basically creating bom/master recipe using transformation process from source box) ???. Kindly please throw some light and also how data is distributed between the two clients. Is Material Master first created in Supply Chain Box (target box), than ALE'd to source box, where it can be linked to Specifications??
    Kindly let me know if I am thinking in correct direction, and also how to connect the 2 boxes?
    Thanks in advance.
    Sachin

    Hi Sachin,
    I think u r right abt the path proposed. However, i am adding few lines further. When implementing ALE functions it has to be ensured that the SAP system is implemented in a well structured way in both clients. Also it has to be ensured that during installation of ALE,  the specification global settings and process functions are not altered in any way.
    If ALE business processes are supported, functions and processes must be defined on a cross-system basis. The message types exchanged between the systems are defined in the distribution model. To implement the distribution of business application processes and functions using ALE it is indeeded to construct a logical Distribution Model of the whole system.
    Within the framework of this configuration, customers can specify which applications are to run on which systems and which messages are to be exchanged between the applications. For example the Master data distribution for logistics is .
    You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
    For more information about maintaining the distribution model see the Customizing Implementation Guide (IMG):
    Application Server -  IDoc Interface/Application Link Enabling (ALE): Modeling and Implementing Business Processes and Maintaining the Distribution Model
    Go thru the link for clarity on the implementation of IDoc interface/ electronic data interchange between the clients and master data.
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm]
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/dc/6b7f5643d711d1893e0000e8323c4f/frameset.htm]
    thank U,
    mahesh

  • Recipe Management: Reporting out of rmwb

    Hi Experts,
    what kind of ways do I have to generate reports out of recipe management, without having the EHS Module licensed?
    For example there is the option to generate reports, but as I see the EHS module is neccessary for usage. An other way is the button "output" above the navigation area. But this option is not very good-looking in my eyes. Is there any other way?
    For example I want to execute some reports like "in which formula is substance xy included" or a list over all substances or I want to execute a search over physical and chemical parameters.
    Are these requests provided by standard or is there any other way to provide reports like this? Or do I have to write some reports?
    Thanks for your time,
    Tan

    That you are forwarded to websmp201 is ok.
    Haven't you been asked for a User ID and PW when opening the site?
    When I logon with my C-User (for SAP partners) I see on the left side a menu tree structure with an entry 'Demos'.
    I think it should also be possible to access this page for SAP customers (but I am not quite sure).
    If you open <a href="http://service.sap.com">http://service.sap.com</a> you will find on the lower part a screen the 'How to Sign in'-section. Maybe this helps.
    Regards,
    Andreas

  • LC Rights Management End User can not find groups or users during policy creation process

    hello,
    I'm using LC8.0.1 turnkey install on win2003 box.
    Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
    I have create a user in the DefaultDom and assigned the following roles:
    Live Cycle Rights Management Invite User
    Live Cycle Rights Management End User
    How can I allow the above created user to search for groups and user during policy creation? Thanks.

    Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
    Here's an overview of Policy Sets:
    http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
    Cut and paste the URL.

Maybe you are looking for