Recipient names not displaying correctly

Hi all,
I'm using the latest Mac Mail.
One really annoying issue is that everytime it does smart complete, my recipient's name is messed up.
For example, it should be "John Doe '[email protected]'" and it should display as John Doe (with the Blue bubble wrapping around it).
But now I always get "[email protected] Doe '[email protected]'" and it is display as [email protected] Doe.
How can I fix it?
Thanks!

Hi
Have just found out what is happening and the solution....but no nearer to knowing why.
The display problem occurs in descriptions of planning levels and packages in BPS0 and in UPSPL & UPSPM. Also when viewing global planning sequences.
The cause is the use of "&" in a description text. When this character is removed and replaced with another, eg "+", then the descriptions display correctly.
I wonder if this is to do with "&" being a special character, which I believe XML doesn't handle too well?
Anyway, I can now change the descriptive text and the problem goes away.
Barry

Similar Messages

Connected Wifi Name not displayed correctly

I have the Xperia Tablet Z SGP311. I got the 4.2.2 update through PC companion in UK. However, I saw 2 major problems. One, the "back" button (of the back, home, history group at the bottom bar) is on the middle now instead of on the side making it difficult to go back with one finger while holding the tablet. I suppose I have to get used to it..
Second, which is a more annoying bug, in the drop down panel at the top, the Wifi connection name is visible only when the notification panel has only one line displayed. When 2 lines are displayed, and the wifi name is cutoff in half with only the bottom half of the name visible, 3 or more it is not displayed at all. I am unable to take a screenshot to show this as when I hit the power button for screenshot, the dropdown panel disappears. It is as if the panel somehow is displayed on top of the name ( which is why the top half of the name is invisible, although all of it is part of the drop down panel).. Anyone has any suggestions to correct this ?
Also is there a way to downgrade the software from 4.2.2 to 4.1.2 ?

I just got information that the problem with SSID not being displayed is planned to be fixed in upcoming updates but i don't have any information on when it will be changed.
We have forwarded feedback regarding the buttons but as this is what Android 4.2 looks like i don't know if that will be changed.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Japanese Partner access names not displaying correctly

Japanese external users' displaying name comes as "????", however their user profile stored correctly in AD. Modifying Locale and Language Settings doesn't seem to have an effect. Does anyone suggest
an approach to solving?

Hi,
According to your post, my understanding is that you have an issue about the display name for users created by Japanese.
What did you mean the Japanese external user stored correctly in AD?
Per my knowledge, the external users are not stored in your organisation, that means they are not stored in your AD.
If the users stored in the AD, per my test, the user name will display well no matter what language created.
You can check the user profile in the user profile service to make sure the user has been synced properly.
Central Administration->Application Management->Manage Service Applications->User Profile Service Application->Manage User Profile
To narrow down whether the issue is related to the user itself, you can create a new user in the AD, then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Planning Level/Package names not displaying correctly in BPS0 (BI7)

We have just upgraded our BW system from 3.5 to BI7. We are running SEM 3.5.
We now seem to have a display issue with the titles of some planning levels and packages within BPS0.
On some planning level/package lines the display in the left hand pane of BPS0 is truncated with only a partial description, even though the full description is displayed in the right hand pane. This is not consistent, as other levels and packages are displayed correctly. It is not truncating at the same place in all instances.
I have tried to delete the description and re-input it again, but the problem persists.
Similar display issues occur in UPSPL in a seemingly random fashion.
Any thoughts would be appreciated.
Many thanks
Barry

Hi
Have just found out what is happening and the solution....but no nearer to knowing why.
The display problem occurs in descriptions of planning levels and packages in BPS0 and in UPSPL & UPSPM. Also when viewing global planning sequences.
The cause is the use of "&" in a description text. When this character is removed and replaced with another, eg "+", then the descriptions display correctly.
I wonder if this is to do with "&" being a special character, which I believe XML doesn't handle too well?
Anyway, I can now change the descriptive text and the problem goes away.
Barry

Chinese Song Name Not Displayed Correctly

When I import music, the song names come up to all garbled, which they are displayed in weird special characters instead of proper Chinese.
I've tried to reverse Unicode, and have no effect on it. I also tried changing the OS language to Chinese, but it doesn't help as well.
When I copied the files from my PC, I've checked the files that they display their song name correctly in Finder, but all corrupted when I import them into iTunes.

When I copied the files from my PC, I've checked the
files that they display their song name correctly in
Finder, but all corrupted when I import them into
iTunes.
The filenames might be OK but the ID3 tags are wrong. See this note for some apps that might help:
http://homepage.mac.com/thgewecke/mlingos9.html#itunes

User name not displaying correctly in history fields in Sharepoint on Office365

The issue is for this one user on any form with history instead of the display name it shows his SharePoint user ID. Everywhere else for that user it shows correctly. For all other users they show correctly in the history as displayname
date/time comment. I know that somehow a field on his user got changed and we need to know what field it is under that user's account so either we can manually change it back or the correct procedure to correct this issue.
I can recreate it by simply creating a new list and select multiple lines of text and select append text to yes
Then in InfoPath select that list item and drag it on the page along with a submit button that writes the data and closes the webpage.
Then open a new item on that list with any other user it creates that item and shows their name time/date and the comment that they made. With the user that is having an issue it shows his user ID time/date and the comment.

Got it.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Dynamic Select List not displaying correct value

Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
                    <option value="Ev" selected="selected">Ev</option>
                    <option value="Fv">Fv</option>
                    <option value="Rv">Rv</option>
                    <option value="Kv">Kv</option>
                  </select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS Access

Ok, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
     var divid = "div" + objThis.id.substring(3);
     if (inBool) {
     ShowDiv(divid);
     else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps.

Application is not displaying correctly and is showing as incomplete

please i really need help i am not understanding this at all i need to send them as pdf files because there application forms I have an issue when it comes to sending the pdf files to someone else and they open the file to then tell me that the text on your application is not displaying correctly and is showing as incomplete.
how do i fix that, they are opening it up using adobe 11 the same as I.

Hey Robert,
Please let me know what OS are you using and ensure whether you are using Adobe Acrobat or Adobe Reader to view PDF files.
Also, tell me whether the recipient downloads the file first and then open in Reader or opens it in the browser only.
Please clarify to me whether you are getting this error pop-up or the recipient?
Hope to get your response.
Regards,
Anubha

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Accented characters do not display correctly if there is a variable beside it

Hello,
We are experiencing a problem when we have text with accented characters an a variable beside it within the same text box.
The problem is that the accented characters in the text do not display correctly in the preview or publised course to Flash9
These characters display correctly in Captivate in edit mode.
This is the process we have followed:
Export to XML
Translated
Import XML
Publish to Flash9
Captivate version: 4
OS: Windows Vista SP2
We have tried to work with locale in Spanish with no luck, the only solution we have found is to put the text and the variable in different text boxes
I have pasted an image of the preview and also of the text in Captivate edit mode.
Any help will be very welcomed !
Tess

Hi there
I agree with Lilybiri that you should definitely file a Bug Report.
However, a thought occurs here. Have you tried placing the accented text in a User Defined variable?
Assuming this is a workaround, my thought is that you could then just have a caption with two variables. The User Defined variable containing the accented text followed immediately by the system variable providing the Project Name.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Map app not displaying correctly

I recently downloaded the most recent os 8.1.3 on my iphone 4s. Now the map app (apple default) doesn't display correctly. I only see the grid and my location dot in standard view, no street names or lines, no details whatsoever. This is affecting any app that uses the apple default (Zillow, trulia, etc). My husband has the exact same iphone 4s and he has the most current os and his map app works fine. I'm thinking that I should try to reload the most current os but since it is the most current, there doesn't seem to be an obvious way since all message are "you have the most current version". I could also try to download just the most recent version of the map app but since it is a default, I don't know how. Any suggestions?

Hi meedjmom,
If you are having issues with your Maps application not displaying correctly, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Date not displaying correctly

Hi,
we have an issue where date is not displaying correctly in report. it shows 1/1/1990. even in universe it shows the same value 1/1/1990. but if i run query at DB level it shows the correct date. Reporting Database is Sybase.
we are on Bi 4.0 SP 6.
Any Ideas.
Thanks,
Yogesh.

HI Farzana,
Finally,i have narrowed down the issue. So here it is,Initially we were seeing date as 1/1/1900 in webi rich, IDT and BI LaunchPad. so than we have made changes to sybase. prm file in following location
........\dataAccess\connectionServer\sybase\extensions\legacy
in prm file the input date parameter is as below
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:m:s am/pm'</Parameter>
we changed it to
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:mm:ss A'</Parameter>
and than we see correct date in IDT and Webi rich but not in BI LaunchPad. the connection we were using in universe is ODBC. so i have created a new connection using sybase CTL client and now i see correct dates in BI LaunchPad also. So i am not sure if i need to make changes to prm file in /dataAccess\connectionServer\odbc\extensions location for the report to show correct values using ODBC.
Any Idea.
Thanks,
Kumar.

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
    name = n;
    acctNo = acct;
    branchNumber = b;
//toString method
public String toString()
String str;
    str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
    return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
    private final double
    MONTHLY_DEPOSITS = 100,
    COMPANY_MATCH = 10,
    MONTHLY_INTEREST = 1;
    private double monthlyDeposit,
    coMatch,
    monthlyInt;
    //The constructor accepts as arguments the name, acctNo, and branchNumber
    public AccountTrans(String n, String acct, int b)
        super(n, acct, b);
    //The setMonthlyDeposit accepts the value for the monthly deposit amount
    public void setMonthlyDeposit(double deposit)
        monthlyDeposit = deposit;
    //The setCompanyMatch accepts the value for the monthly company match amount
    public void setCompanyMatch(double match)
        coMatch = match;
    //The setMonthlyInterest accepts the value for the monthly interest amount
    public void setMonthlyInterest(double interest)
        monthlyInt = interest;
    //toString method
    public String toString()
        String str;
        str = super.toString() +
        "\nAccount Type: Hybrid Retirement" +
        "\nDeposits: $" + monthlyDeposit +
        "\nCompany Match: $" + coMatch +
        "\nInterest: $" + monthlyInt;
        return str;
    //Using the getter method for the customer.java fields
    public double getCurrentBalance()
        double currentBalance;
        currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
        return currentBalance;
}File 3
    public static void main(String[] args)
//Creates the AccountTrans object
        AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
        //Created to store the values for the MonthlyDeposit,
        //CompanyMatch, MonthlyInterest
        acctTrans.setMonthlyDeposit(100);
        acctTrans.setCompanyMatch(10);
        acctTrans.setMonthlyInterest(5);
        DecimalFormat dollar = new DecimalFormat("#,##0.00");
        //This will display the customer's data
        System.out.println(acctTrans);
        //This will display the current balance times 2 since the current
        //month is February.
        System.out.println("Your current balance is $"
                + dollar.format(acctTrans.getCurrentBalance()));
    }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
    (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Often you solve your own problem whilst preparing the SSCCE.
    - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Indentation is essential to following program code.
      - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

Unicode character not displaying correctly

when i am stroring Unicode Character in Oracle 8 DB .The Stored Character are not displayed correctly . Through sql client seen as '�' .Altough through JSp it displays correct value 集 (in japanese)
My client wants to see through sql also same value . Pls help wat is wrong. More info :
Oracle is set up in UTF-8 Format.
Using code as below before inserting in DB
String temp =product.getDescription();
String newResult = new String(temp.getBytes("UTF-8"), "UTF-8");

TryString newResult = new String(temp.getBytes(default),>
"UTF-8");// "default" is a String of the name of
default encoding on the part of client
Sorry there was a slip. Try the following.
String newResult = new String(temp.getBytes(default));

Recipient names not displaying correctly

Similar Messages

Maybe you are looking for