Recipients getting strange number?

I just signed up for VZW and ported my number from Tmobile. Now sometimes all the sudden people I text report that from their point of view, the sender's number was something crazy like +120837598139485. They cant respond to it, and only once they figure out it's me do they go into their address books and start responding using my actual phone number. They can send to me just fine, and sometimes when I reply it looks like it came from the right number. But other times they get this. One of them uses Tmo and the other is another VZW customer, and they both get the same result at times.
So what gives? Anyone ever heard of sending txt messages from a totally random number bug like this?

runngun42 wrote:
I just signed up for VZW and ported my number from Tmobile. Now sometimes all the sudden people I text report that from their point of view, the sender's number was something crazy like +120837598139485. They cant respond to it, and only once they figure out it's me do they go into their address books and start responding using my actual phone number. They can send to me just fine, and sometimes when I reply it looks like it came from the right number. But other times they get this. One of them uses Tmo and the other is another VZW customer, and they both get the same result at times.
So what gives? Anyone ever heard of sending txt messages from a totally random number bug like this?
It is a known issue. The phone is sending out the SIM card number. See this link for instructions on where to look in the settings.
http://community.vzw.com/t5/ThunderBolt-by-HTC/New-Number/m-p/477732#M885

Similar Messages

Call drop while talking long distance and strange number in log

Talking to relative in NY, call dropped with no dial tone after that. Unplugged all phones, checked the connection box. Dial tone came back after about 15 minutes. Checking the digital phone log revealed that {edited for privacy}was listed as being called 7 times during the time of no dial tone. Looking at the log again showed that {edited for privacy} was called eight times yesterday. About a call a minute to this number. Have no idea what this number is. It seems that everytime the calls are dropped, this is the number in the log. What is happening?

The alarm system checks out OK, strange number was just the system making the regular 28 day call. Calls are still dropping, mostly after talking for a long time. Can call the number back immediately and get connected. Dial tone is not missing for these latest incidents, althought it was missing once in the past. Also have an answering machine that clicks at random as if someone is picking up a phone. Answering machine is set to 4 rings and digial voice answering is set to 6 rings. The whole system worked fine when installed, now is a constant problem. Going to start disconnecting things and probably run a wire from the box directly to one phone. Is there a tracer that can be hooked up to monitor the line?

Getting strange call every 2 weeks anyone else get...

Every 2 weeks now for long time I have been getting this number call me on my land line: 07049-205950....a man calls and say's "Hellow, Hellow....can you hear me....then static noise then the call goes dead....the man sounds very far away this is a patern every week same routeen....does anyone else get these call's from such numbers coded like this???? Very strange....!!

turquoisewaters wrote:
Every 2 weeks now for long time I have been getting this number call me on my land line: 07049-205950....a man calls and say's "Hellow, Hellow....can you hear me....then static noise then the call goes dead....the man sounds very far away this is a patern every week same routeen....does anyone else get these call's from such numbers coded like this???? Very strange....!!
This might stop them.
Because TPS certainly can't
toekneem
http://www.no2nuisancecalls.net
(EASBF)

SSRS how to get for number of months

Hi All;
below is my SSRS expression
=Cdate(Format(Cdate(Mid(Fields!createdon.Value,4,2) & "/" & Mid(Fields!createdon.Value,1,2) & "/" & Mid(Fields!createdon.Value,7,4)),"MMMM yyyy"))
which gives me the month in MMMM yyyy format in Jan 2014, Feb 2014, Mar 2014... so on
i need to remove a average of a month
i.e Months value/No of months
I do i get number of months dynamically in SSRS
Any help much appreciated
Thanks
Pradnya07

Hi Pradnya07,
In your scenario, it seems that the createdon is a string data type field with this format: 15/09/2014.
If we want to get the number of the month in the createdon field, we can directly use the expression below:
=cint(Mid(Fields!createdon.Value,4,2))
If you also need to get the average data for a month like ‘Months value/No of months’, please refer to the following expression:
= Fields!Amount.Value /cint(Mid(Fields!createdon.Value,4,2))
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

have an iphone4 and my husband merge his numbers with mine and i think it was deleted can you tell me how can he get his number back on his phone

Do you possibly mean the contacts have been merged?
If so, where are each of you syncing contacts? A supported application on the computer? iCloud or another cloud service? An Exchange server?
WIthout details, it's difficult to offer specific resolutions.

How can you get your number back on the iphne

I'm tryna get my number to my phne instead of my icloud email

Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

How to get row number in the fetch row itself in Sql Query ?

Hi,
i am fetching some rows from a sql query . Is there any way to get row number as well in each row while all rows are fetched ?
like this :
RowNum data1 data2
1 abc ere
2 bnh ioi

Hello
Ofcourse you can get the rownum inside a query, just keep in mind that the rownum is the number of order in which the records were fetched from the table, so if you do an order by, the rownum will not be sequential, unless you query the information in a subquery first.
SELECT rown, col1, col1
FROM table
Or
SELECT rownum, col1, col2
FROM (SELECT col_1, col_2 FROM table ORDER BY col1)
Regards
Johan

How do i get my number files on my iPad from my iMac computer?

How do I now get my Number 09 files up on my ipad so the will sync in the cloud?

If you are running OSX 10.5.7 you cannot use iCloud on your Mac since one of the requirements is that the Mac needs to be running Lion. However, if you are really running 10.5.7 - you can't sync the iPad either since the minimum for that is 10.5.8.
I will assume that your tagline is incorrect and you can at least sync the iPad with your Mac. And .... you need to have Numbers installed on the iPad so I will assume that you have that installed as well.
The text below is copied from the kb article below.
iWorks for iOS: About iTunes File Sharing
Copying Numbers files from your computer to the iPad using iOS file sharing (Title changed for Numbers)
Connect your iOS device to your computer using the included Dock Connector to USB cable.
Open iTunes on your computer.
Select your iOS device from the Devices section on the left side of iTunes.
Click the Apps tab and scroll down to the bottom of the page.
Note: If you do not see the File Sharing section shown in the image below, your iOS device does not have any apps installed which support File Sharing, such as the iWork for iOS apps.
Under the File Sharing section, you should find a list of apps currently installed on your iOS device that use File Sharing (such as Keynote, Pages, and Numbers for iOS). Select an app to view a list of the files associated with that app on your iOS device.
You can drag and drop files into the Documents list to send them to the app on your iOS device. You can also click the Add button, locate the file or files you want to send from your computer, and then click the Choose. The files you select will be copied to the app on your iOS device immediately. Select only files that are supported by the iOS app. Once you’ve copied your file(s) to your iOS device from within iTunes, open Keynote, Pages, or Numbers on your iOS device.
Navigate to the Document Manager screen
Tap the plus icon in the upper-left corner, and then tap the iTunes icon:
This will open the "Copy from iTunes" window:
Tap the file you want to copy and the document will automatically be added to the Document Manager and open.
(Any compatible file that you’ve copied to your iOS device using File Sharing will be listed in the "Copy from iTunes" window. If the file is not listed, confirm its file type is compatible with the iWork app.)
Back to my own words now.... You can sync these documents to iCloud using your iPad as long as you set it up in the iCloud settings. If you make changes to this document on the iPad - it will not sync back to the Mac via iCloud. You can sign into your icloud.com account on the Mac - click on iWorks - click on Numbers - select the file - and download the file to the Mac to work on it again - but you can't upload it again unless you are running 10.7.2 on the Mac. You will have to get the file back onto the iPad via file sharing as described above.

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page word document, some recipients get only one page. Also sometimes when I burn an image from iPhoto on to a disc, only part of the image appears. Why?

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

How to get week number from date

Hi,
please mention how to get the number of week from a particular date using fn module?

Hi Debarshi,
Use FM DATE_GET_WEEK
Reward points if helpful.
Regards,
Hemant

How to get total number of nodes in a JTree?

Hi,
I am trying to get total number of nodes in a JTree, and cannot find a way to do it.
The current getRowCount() method returns the number of rows that are currently being displayed.
Is there a way to do this or I am missing something?
thanks,

How many nodes does this tree have?
import java.awt.EventQueue;
import javax.swing.*;
import javax.swing.event.TreeModelListener;
import javax.swing.tree.*;
public class BigTree {
    public static void main(String[] args) {
        EventQueue.invokeLater(new Runnable() {
            public void run() {
                TreeModel model = new TreeModel() {
                    private String node = "Node!";
                    @Override
                    public void valueForPathChanged(TreePath path,
                            Object newValue) {
                        // not mutable
                    @Override
                    public void removeTreeModelListener(TreeModelListener l) {
                        // not mutable
                    @Override
                    public boolean isLeaf(Object node) {
                        return false;
                    @Override
                    public Object getRoot() {
                        return node;
                    @Override
                    public int getIndexOfChild(Object parent, Object child) {
                        return child == node ? 0 : -1;
                    @Override
                    public int getChildCount(Object parent) {
                        return 1;
                    @Override
                    public Object getChild(Object parent, int index) {
                        return node;
                    @Override
                    public void addTreeModelListener(TreeModelListener l) {
                        // not mutable
                JFrame frame = new JFrame("Test");
                frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
                frame.getContentPane().add(new JScrollPane(new JTree(model)));
                frame.pack();
                frame.setLocationRelativeTo(null);
                frame.setVisible(true);
}But for bounded tree model using DefaultMutableTreeNode look at bread/depth/preorder enumeration methods to walk the entire tree. Or look at the source code for those and adapt them to work with the TreeModel interface.

How to get total number of days

Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..

Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = p_lv_date1
      i_datum_von                   = p_lv_date2
   IMPORTING
     e_tage                        = p_e_date_difference
   EXCEPTIONS
     days_method_not_defined       = 1
     OTHERS                        = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam.

Query to get Week number Pls help

I need to get week number of the current year in the format 2008-W47 ( this is for sysdate
when i try
select to_CHAR(sysdate,'YYYY'||'-IW')
FROM DUAL
i get 2008-47
but in the format 2008-W47
Help
s

SQL> select to_CHAR(sysdate,'YYYY')||'-W'||to_char(sysdate,'IW') from dual
2 /
TO_CHAR(
2008-W47

How to get the number of days in a month?

hi all
is there any way to get the number of days in a given month with a given year? for instance, if year is 2004 and the month is July or February, how can i get the number of days? thanks.

Gee, I don't know ... Maybe this:
Calendar cal = Calendar.newInstance();
cal.set(Calendar.YEAR, 2004);
cal.set(Calendar.MONTH, Calendar.FEBUARY);
System.out.println("max days in month: " + cal.getActualMaximum(Calendar.DAY_OF_MONTH));
Do you not bother reading what people have already posted? Read the API docs on the Calendar class.

Indesign CS3: How to get the number of the current layer?

Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois Blaimer

InterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); int32 layerCount = layerList->GetCount(); To findout layer name use IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex); PMString layer=documentLayer->GetName();

Recipients getting strange number?

Similar Messages

Maybe you are looking for