Reciver Problem

Hello,
I have a jdbs sender to XI proxy reciver.
i get an error :
"No standard agreement found for , CUCC_IQMDRQA1_BSYS, , CRDCLNT800, urn:com.zim:cucc:customer_management, CreateBusinessPartner_Out</SAP:AdditionalText>
  <SAP:Stack>Problem occurred in receiver agreement for sender "
Im developing on PI 7.1
can anyone help ?

> i get an error :
> "No standard agreement found for , CUCC_IQMDRQA1_BSYS, , CRDCLNT800, urn:com.zim:cucc:customer_management, CreateBusinessPartner_Out</SAP:AdditionalText>
> 
>   <SAP:Stack>Problem occurred in receiver agreement for sender "
Your Receiver Agreement is not correct, this could be due to wrong configuration. Check it again.
Regards,
Sarvesh

Similar Messages

  • IDoc reciving problem

    Hi Experts,
    I want to send data one SAP server to another SAP server, At sender End IDoc is being sent successfully but at receiver end no IDOc is receive. plz suggest some solution.

    Hi Ravinder,
    If the IDocs have been sent successfully from the sender system and not received at receiver side, then they must be RFC queue.
    Can you please tell us the status of the Outbound IDoc??
    If it is '03' (Data passed to port OK), then execute T.code 'BD75' which will change the status of the IDocs to status 12.
    If it is still not passed then execute 'SM58' t.code to see the Status text which will help you in analyzing the error.
    Please revert back if facing some issue.
    Cheers
    VJ

  • Why does PI pickup wrong interface, in the interface determination step

    I configured a scenario in id.
    In ID, i can see the following when i open the interface determintation that i created.
    Sender Details:
    Communication Component:Sys_Sample_One_D
    Interface: UserMasterQuery_Outb
    Namespace: urn:sample.com:I_Legacy_JDBC_Application
    Receiver Details:
    Communication Component:Sys_Sample_Two_D
    Interface:EmployeeEmailProcessing_Inb
    Namespace:urn:sample.com:I_Legacy_FileApplication
    Interface Mapping: UserMasterResultset_to_EmployeeEmail
    But when i execute the scenario, and when i see in the the Interface determination pipeline step in moni, it is showing:
    <SAP:Main..
         <SAP:Sender>
              <SAP:Service>Sys_Sample_One_D</SAP:Service>
              <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
         </SAP:Sender>
         <SAP:Receiver>
              <SAP:Party agency="" scheme=""/>
              <SAP:Service>Sys_Sample_Two_D</SAP:Service>
              <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
              <SAP:Mapping notRequired="Y"/>
         </SAP:Receiver>
         <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface>
    In the <SAP:Receiver> section, the <SAP:Service>Sys_Sample_Two_D</SAP:Service> is as per my configuratioin,
    but <SAP:Interface namespace="urn:sample.com:I_Legacy_JDBC_Application">UserMasterQuery_Outb</SAP:Interface> is not the interface that i configured as the receiver interface, infact this is the sender interface.
    the correct receiver interface to be pickedup is EmployeeEmailProcessing_Inb
    and finally it is showing the error in moni, in the Technical Routing pipeline step
    <SAP:AdditionalText>No standard agreement found for , Sys_Sample_One_D, , Sys_Sample_Two_D,
    urn:sample.com:I_Legacy_JDBC_Application, UserMasterQuery_Outb</SAP:AdditionalText>
    the error i can see later, but i would like the right interface to be determined by PI,
    i refreshed various caches etc, recreated the config objects in ID, but it is not picking up the right receiver interface.
    any inputs appreciated, to find out what went wrong.
    thanks,
    Madhu.

    Two threads which has some discussion regarding this happening in PI 7.1.Hope it gives you some help.
    Incorrect Receiver Determination
    Reciver Problem
    And, as you have checked your Interface determination similarly can you also check your receiver determination.
    Does the receiver determination have the correct receiver at the bottom ?

  • ASN numbers on AS400

    hi all
    we are distribution co we use AS400 opus WM, we get ASN numbers and material through idoc to as400 from ecc6
    some times ASN in AS400 is not created ( we have to refire the idoc or matmas ) can some one advice me why this happening
    and is it XI problem or SAP or AS400 (reciver problem)
    thank you
    ashok

    the error can be in any place.
    You have to check each system whether  the IDOC was received, or was sent.
    receiving is a different step to posting.
    Maybe you received it in the AS 400, but the posting failed for various reasons.
    WE02, WE05 and BD82 are transaction codes to monitor IDOCs in SAP

  • When I attempt to open lightroom I recive this message: [ Lightroom encountered an error whenreading from itspreviw cache and needs to quit.Lightroom will atempt to fix this problem next time it launches.] I did this a few times but no resoulve

    When I attempt to open lightroom I recive this message: [ Lightroom encountered an error whenreading from itspreviw cache and needs to quit.Lightroom will atempt to fix this problem next time it launches.] I did this a few times but no resoulve

    It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.

  • I have big problem i make update to my software  iso 7.12 in my iphone 4  but when i recive calling  and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

    modem firmware 04.12.09
    iPhone 4
    memory is 32 g
    iso 7.1.2(11d257)
    when cancel call it not work before is shutdown and open it again
    i have big problem i make update to my software  iso 7.12 in my iphone 4  but when i recive calling  and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Problem in JDBC Reciver Channel

    Hi Experts,
              My scenario is , transfer records from one table to another table in MS SQL Server.For that I have created a JDBC to JDBC Scenario. I am using same Business System for both Sender and Reciver Communication Channels.  I have created two tables in SQL Server with same fields and mapped in message mapping accrodingly.
          I have written a SQL Queries in Sender as
            SELECT .....  SELECT * FROM EXAMPLE WHERE FLAG<>'0'
            UPDATE.....   UPDATE EXAMPLE SET FLAG='0' WHERE FLAG<>'0'
       When i insert the records in EXAMPLE(source) table the flag field values are updated to '0'.
       But these records are not inserted into Destination table.
    I have checked the result in Communication channel monitoring .. the result displayed for Sender Communication channel showing as "PROCESSED SUCCESSFULLY"
    but where as in Reciver Communication Channel it is still showing as "FUNCTIONING"
    What might be the problem...
    Please help me in sloving this issue..
    Thanks in Advance,
    Murthy.

    Hi Bhavesh,
           I can not provide XML Source for JDBC adapter as I can not get any message when i checked in SXMB_MONI.
           As you told me, I looked into Message Monitoring in RWB for messages in Integration Server and Adapter Engine.
          I could found the Messages for Sender Interface in Integratio severa, and it's status as System
    Error. Here is the complete info.
    Attribute Value
    Engine Adapter Engine
    Status System Error
    Repeatable Yes
    Cancelable Yes
    Start 16.05.2007 12:09:14
    End 16.05.2007 12:24:14
    Sender Party  
    Sender Service WORK_DEMOAR_BS
    Sender Interface http://prospecta.com.au/DemoAr/JDBC2JDBC
    SENDER_MI
    Receiver Party  
    Receiver Service  
    Receiver Interface  
    Quality of Service Exactly Once
    Error Category XI_J2EE_ADAPTER_XI_HANDLER
    Error Code GENERAL_ERROR
    Message 297BF2A0037811DCB75B0015170C6BA8
    Reference  
    But i could not found any messages for Reciver interface in Integratio Server.
    Also i could not found any messages for Adapter Engine for both Sender and Reciver.
    Thanks,
    Murthy.

  • Hallo guys, I have macbook pro buy march this years, now i have problem whit desktop sometime i recive green screen did some have idee what can be problem

    Hallo guys, I have macbook pro buy march this years, now i have problem whit desktop sometime i recive green screen did some have idee what can be problem

    You are still under warranty.  Call Apple Care.   
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked. 
    #2 - You have 90 days of FREE phone tech support. 
    #3 - You have the standard one year Apple warranty. 
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.    
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • N73 SMS problems,send/recive

    Hello,
    I have a Nokia N73, and can't send or recive messages from the phone, but when i put the SIM-card into an other phone, I have no problem y sending or reciving messages, anyone who have had this problem or know what to do?
    Thank you..

    Be sure to backup your phone for it will reset to factory default & erases most of the files:
    Format Nokia Phone:Works in most symbian
    Apart from usual keyin *#7370#
    Or you could try full format:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, press the power button and switch on the phone.
    4. When the message 'Formatting' appears on the screen, release all of the buttons.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • I recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me! :)

    i recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me!

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • Odd problem in recive message, please help me

    i have a problem in N73.
    Some messages are displayed at Log application but not display in inbox!!!
    Please help me.

    Is there any SMS Blocking application active in your phone ?

  • Problem while creating 3rd party sales order Recive Goods

    Hi,
    I am facing a problem in the t.code MIGO_GR, The messages are:
    1)Storage "bin 010" does not exist (check your entry).
    2) Material "3rdparty" does not exist in warehouse 010
    Please advice me how to resolve it.
    Thanks in advance.
    ANGKS

    Hi,
    It looks you are trying to use storage bin 010, which is not existing in the system.
    On the MIGO-GR line item level, try to change the bin to other available bin.
    Alternatively if you want to use the same bin number, then use transaction code LS01N to create a storage bin 010, then try to receive the goods.
    Regarding your second message, the material needs to be extended to warehouse 010. You can use transaction code MM01 to extend the material to warehouse 010. (meaning you need to create the warehouse views).
    Hope this helps.

  • AppleCare Service Problem (Recived less than 60GB ipod).

    Hello, I recently sent in my 60G ipod for service and it appears it was replaced with a new one. The problem is, I have been cheated out of about 5 gigs of memory. When I connected my ipod to my pc for the first time it read, Free: 55.68 GB. Is this normal? Should I complain about this and who should I contact? Thanks for any help,

    As an aside, this applies to all hard drives. So when you are talking about gigabytes, the real size in your computer is only 0.93 times what is stated on the box. So a "250GB" will be around 232 and a "160GB" drive is really less than 150GB. So don't feel too bad about your 5GB, if it was a "250GB" iPod you would have lost 18GB. Or as an extreme example, with 500GB drives being available now, you actually end up with 35GB less in real storage. That is more than an entire 30GB iPod of pretend storage.
    Patrick

  • Please my old verson iphone is block because yesterday i update but now i cannot open my icone only i can recive call and emergency call so please tell wht should i do for this problem.

    before my iphone need to update 41 softweare so yesterday i update but now i cannot open  its icone only emergency call only  but i can recive call so wht should i do for it.

    Are you getting a message about an unsupported SIM? It sounds like you had a phone that had been hacked to work on a network other than the one it was locked to and updating it has re-locked the phone to the original network.
    Where exactly did you get the phone? What network are you on? If you did not purchase your phone directly from DU or from Etisalat (assuming you are using a carrier in the UAE) or from a carrier in the country where you purchased the phone or directly from Apple, then you got a gray market phone and it was most likely hacked to unlock it in the first place. Most of these gray market, hacked phones come from the US and were originally locked to AT&T.
    Only the carrier the phone is locked to can authorize an unlock. If it is locked to AT&T, they will NOT authorize an unlock.
    If any of my assumptions are incorrect, I apologize.  We need more information, though to make a recommendation.

  • Has anyone had a problem where each text message is being recived twice?

    Recently everytime I recieve a text, I get two notifications for it, anyone else having this problem?

    no.  Sounds like a carrier issue, though.

Maybe you are looking for