Reclaim an IP from the IP Pool allocated for ESXi VTEP

I had an IP Pool of 5 addresses all of which were allocated to my 5 ESXi hosts. I then screwed up the VTEP vmkernel port on one of the ESXi hosts. I was only able to correct it by adding another IP to the IP Pool range of addresses and then Forcing a Synch. Now I have an IP Pool that show 6 of 6 IP addresses allocated when in reality I only have 5 of 6 allocated to ESXi hosts. Is there any way for me to reclaim the 6th IP address in the pool that is still showing Allocated?
Thanks

The commands you provided worked perfect. My IP Pool in NSX Manager now says 5 of 6 allocated. At first it still wasn't obvious what the pool-id was after running the command https://<nsxmgr-ip>/api/2.0/services/ipam/pools/scope/globalroot-0. However, under <ipamAddressPools><ipamAddressPool> is <objectId> and its that objectid that is the pool-id needed for the command https://<nsxmgr-ip>/api/2.0/services/ipam/pools/<pool-id>/ipaddresses/<ipaddress>
Thanks

Similar Messages

Possible to detect if a connection was fetched from the connection pool?

Is there any way to differentiate between newly opened connections and connections that came from the connection pool? It would have to work without requiring a round trip to the server because I'd only use it to optimize away a procedure call that I now have to do for every connection that is opened.
If the answer is different for the classic provider and the fully managed one, please provide both.

@Op. What you are trying to do can't be done.

Function modules from the function pool Z_MEREP_G (Message no. MEREP_00530)

We installed a new system and imported the syncbo definitions to this new system.
After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
Message no. MEREP_00530
After investigation the following syntax error is shown:
Source code LZ_MEREP_GEN_T01_MAM25_016U04 Line 641
The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
"MAM25_016_I_CONVERSION".
We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
Does someone have an idea how to solve this?
Thanks in advance,
Benjamin de Rijke

Hello Rahul / Karthick,
Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well. The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
Kind regards,
Benjamin

About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

Just to make sure, open Mac App Store and click Purchases. Can you pause the download and restart it?

What is new from the update 5.0 for Iphone 4 users?

what is new from the update 5.0 for Iphone 4 users?

Click......
what is new from the update 5.0 for iphone 4 users?

I recently purchased, from the APP store, Lion for use on my MacBook Pro. I wish to upgrade my IMac to Lion also. Do I need to make a 2nd purchase or will the single purchase suffice? If the single purchase will suffice, how do I facilitate ?

I recently purchased, from the APP store, Lion for use on my MacBook Pro. To upgrade my IMac to Lion, need I make an additional purchase? If not, how do I facilitate the IMac upgrade?

No, you do not need to re purchase Lion. You can re download Lion on all your authorized Macs using the same Apple ID.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.

Is it possible to recover deleted files from the Microsoft Word app for iPhone? I am desperate.

Is it possible to recover deleted files from the Microsoft Word app for iPhone? I am desperate.

From the Microsoft Word app they say "Access Word documents from OneDrive, Dropbox, iCloud, OneDrive for Business, or SharePoint" so it sounds like you can specify where they are saved. However, my guess would be that the default will be OneDrive.
To the OP: Have you tried logging into onedrive.live.com to see if you can see your letter there?

HT204088 how to I find out the most recent deductions to my account from the app store (say, for a recent download for additional functionality on a iPad game)

How to I find out the most recent deductions to my account from the app store (say, for a recent download for additional functionality on a iPad game). Much as I try, I can't seem to get to see my account in enough detail to see what I have spent downloading apps to the ipad.

You need to punch in the passcode for any purchase right, not just for new apps??
If one of the other students, or anyone else, got access to your iTunes Store account, necessary to make any purchases, then they'd have all the information they'd need to also make in-app purchases. But an in-app purchase can only be made through the account through which the original app was purchased. Either your son bought the game (free or paid) and then shared it with someone else along with the account information (necessary to authorize the app on someone else's device), or someone else downloaded the game as well, not just made in-app purchases.
In any case, changing your iTunes Store password should now have cut off any such unauthorized activity, though of course if your son gives the new password out, you'll be back to square one.
Regards.

Is it possible to purchase an Applecare plan from the United States (LLA) for a MacBook Pro from Latin America (LZA)?

Is it possible to purchase an Applecare plan from the United States (LLA) for a MacBook Pro from Latin America (LZA)?

That's somewhat of a legal question which may not be able to be answered here by the uers/volunteers - I'd suggest you check with a local apple store.
In the US, you can purchase it at any authorized reseller as long as you register it with the serial number of the computer within the first 364 days of ownership, but I do not know if a US product will work with one from another country.

Aperture purchased from the App Store asking for Serial Number?

Aperture purchased from the App Store asking for Serial Number?
Has anyone seen this? I just updated the app and now I can't get in.
I don't understand.

First thing to try is delete the app. Open the Mac App Store and the status in the Purchases section should update to "Install". Click to download the full app rather than an update.

How do I get my microphone to work in bootcamp? It is from the earbuds I use for my iPhone.

How do I get my microphone to work in BootCamp? It is from the earbuds I use for my iPhone.

There must be a way to get it to work... I mean it works fine in Mac OS X so there has to be a way to tweak it to work in Windows... right?
I really like using my iPhone headset, it's a bummer it doesn't work

Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

What kind of noise?
The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
Allan

I have purchased adobe light room 5 and upon download from the website was asked for me code .... so

I have purchased adobe light room 5 and upon download from the website was asked for me code so i entered it. then after installation when clicking on the desktop icon i was once again asked for my code. when i entered it a big red cross apeared next to the code and i was informed to either buy light room (AGAIN) or use the free 30 day trial. how do i use the light room i have paid for?

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

You might give VueScan a try. It should work with your scanner. There's a demo version that you can use initially.

DPM encountered an error while reading from the recovery point used for recovery.

Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Reclaim an IP from the IP Pool allocated for ESXi VTEP

Similar Messages

Maybe you are looking for