Reclaimed photo thumbs but what do I do next?
Lost some sideshows but was able to retreive all but one. The one not found, I found by Spotlight, but when clicked it appeared in iCal---nothing I can do with it there!
Tried searching on Thumbs. "VBA picks up computer" came up and this msg was also put on iCal!
Found photos in Thumbs which included the photos I was looking for. Now I have a desktop screen filled with these thumb photos. My objective was to get them back into iPhoto album and create a new slideshow...but have absolutely no idea how to save each photo to iPhoto.
Any and all help would be appreciated for me to get my great-granddaughter's birthday party back into iPhoto before I die.
Thanks
No reply yet. Perhaps I was not clear, but not skilled in iPhoto with no manual--yet!
No longer have original photos downloaded from digital camera. But see in "caches"> HP Photo Library>Thumbs folder with the thumbs of all the photos I am looking for. So opened all these thumbs onto my desktop, but they are very fuzzy (pixel problem?). One photo came up on desktop with long photo number followed with "mb.jpg 200x150".
My question is: Is there any way I can use these thumbs to make into a new slide show? Understand, I am a novice and do not have the "missing" iPhoto 09 manual--yet! It's been ordered.
Similar Messages
-
I just reinstalled and this is the pop up that shows "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?" what do i do next? it just keeps popping up and loading but only gives a quit button?
Update it.
How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
Regards
TD -
Photos tweaked but what size do I save them?
I have been using PE7 for a few weeks now and am very pleased but realising that I can't keep on saving pictures at full size every time. So what should I do when re-sizing to keep at a sensible file size but retaining a lot of the goodness.
Is is the maximum number of pixels across one side, is it the resolution pixels per inch, or saving with a lower quality setting when saving as a jpg. I use a small programme called jpegresizer6 which gives me the option of batch processing but I really could do with some help on how?
Thanks.chickmug22 wrote:
I have been using PE7 for a few weeks now and am very pleased but realising that I can't keep on saving pictures at full size every time.
Really? Why not?
So what should I do when re-sizing to keep at a sensible file size but retaining a lot of the goodness.
Is is the maximum number of pixels across one side, is it the resolution pixels per inch, or saving with a lower quality setting when saving as a jpg. I use a small programme called jpegresizer6 which gives me the option of batch processing but I really could do with some help on how?
Most people I know keep the photo at full size, and save at something less than full quality (for example, quality 8 or 9).
Batch resizing is something I would not recommend. I consider it to be an atrocious practice, because you are taking your original photo (or an edited version) and deliberately removing detail and resolution from the photo. -
What is the procedure to get the newer Firefox version up an running. I need to know if I can just install the new version over the old one or is it more complicated. And once the new version is installed, is it necessary to reboot my computer before I can use it?
You're welcome
-
How do I rearrange the photo's in an album on my iPad?
Photo stream is just a sync service and you have no control over the ordering of photos. But, what you should be doing is moving the photos out of photo stream into a different, permanent album where you can order as you wish. Remember, if you ever turn off photo stream for whatever reason, the photos in that special album will be deleted. When you later turn the service back on, you'll only get those photos still in the stream server, which are limited to a max of 1000 and no older then 30 days.
-
Hope I'm in the right place. First time user. Not tech savvy. Just upgraded to OSX Mavericks. Box keeps asking me to enter my iCloud password. I keep entering my password but box keeps popping back up asking for password?! I selected cancel but what should I do next time it asks for my iCloud password? Is my iCloud working? How do I retrieve my password?
ThanksIn the iCloud pane of System Preferences, uncheck the box marked Mail and check it again.
-
When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?
Have a look at your import setting specifically Store Files:
Make sure it is set to where you want the originals to go.
Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera. -
My photos on my iPhone 4 are on my camera roll and in my photo stream, but my recent photos have not moved to my photo stream folder on my computer (windows 7). What can I do?
At 1.3GB available, your storage space is getting very thin no matter what you do further. As long as you have the photo's in the camera roll saved on your computer you can delete them. Just make sure first that they are in your photo software. If updating in iTunes, just backup/sync first, then update, and that will save the camera roll in the backup as well.
At only 1.3GB you eventually are going to find yourself unable to install or update some app, or unable to take any new pictures, or some other limitation that will force you to free up space anyway. So now, before updating, sounds like a good time to make sure everything is backed up or stored somewhere else, and clean house a bit, then update. -
Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.
Could it be something i have done in my settings?
or when i am saving the file to JPEG?Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level. -
I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?
Have you tried here:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams -
I did exactly the steps to sync photos, but photos does not sync to my ipad. what should i do next?
I have the same problem. I have windows 7 and windows will recognize my ipod touch 4G but Itunes keeps saying that I need to uninstall and reinstall the 64bit version. I have done this 2 times already and it still doesnt work
Please help!! -
I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself. What's going on?
He meant post it here, of course, Louie! How on Earth would you post it "on Photoshop" ?
Thank you for the belly laugh. -
macbook pro had to be wiped out and I lost iPhoto (was free on the computer when I first bought it). Re-bought iPhoto but I can't find/get my photos. Now what?
Re-bought iPhoto but I can't find/get my photos. Now what?
iPhoto stores your photos in the iPhoto Library, by default it is in your Pictures folder. Double-click the iPhoto Library in "Pictures". Did you restore your documents and data, including the Pictures folder from your backup after the drive has been wiped? -
I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?
Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne
Maybe you are looking for
-
BO XI 3.1 SP3 and Excel 2010
Hi There My BO is BO XI 3.1 SP3, and excel is 2010, my webi report has over 65523 rows, but I found in the excel, it will split into two tabs, it does not use excel 2010 feature does any one know the reason? thanks
-
How can i install airport express A 1264 on os x 10.9.2
How can i install Airport Express A 1264 on os x 10.9.2
-
Accents are not being shown when printing
Hi. When I print a webpage that contains characters with accents some of than simply disappear, even though the page is displayed correctly on the browser. This happens especially in uppercase letters. Does someone know of some configuration I can ma
-
Hi I just bought a new computer a VAIO, pink 15.5 screen e series with window 8, internet explorer 10, adobe reader x, Adobe Photoshop Elements 10 & with an Intel Core 15-3210m processor 2.5 GHz with turbo boost up to 3.10GHz1 already installed on i
-
The activation RDS CRM7.0 EHP1
Hi, during the activation RDS CRM7.0 EHP1 according the CRM_UPGR_Quick_Guide_EN_XX we can see message. this message tell us to do following step: 6.7.4 Maintain User Settings: Path to Installation Data Parameter = % documentation % Value = http://hel