RECN (Process Contract) Error while adding condition type

Hi All
I am processing the contract (RECN). While adding a new condition type, it gives me thr error
Parameter KWH (area unit) for calculation formula Y3 has errors
Moreover when i defined this calculation formula (Y3), units KWH are not coming in area unit field (F4-possible entries).
Pls help me with that.
Thnx in advance
Deepak

Hi,
i am assuming you have added customised formula to condition type while creation of conditon. for the formula there is no link to Badi.
if the above is right, you need not to add any formula and parameter while creation of conditon,first remove the formula form the conditon and assign standard one.
then select the formula after inserting the condition. error about the formula may be  no value is being supplied from the formula.
thanks
Jilani

Similar Messages

  • Getting error while creating condition type in SPRO

    Hi ,
    can somebdy tell me why i am getting the following error while creating condition type in SPRO
    No valid change license available for message /sapcnd/
    and also while rule determination using condition type we are getting the following error.
    system error:system cannot read the structure for table
    reg
    venkat

    Hi Venkat,
    Do you have the error number code!?
    Regards,
    Michel  Bohn

  • Error while adding conditions in Imports PO

    Dear Sir,
    We want add Freight charges and Custom Clearing Charges in Imports PO as Misc. Charges in condition ZMIS.
    But we try to add these as 3 % it gives following error
    Provision account key missing for condition type ZMIS in schema ZHILI1
    Message no. ME172
    Please suggest me the solution.
    Thanks & Regards
    Vishal

    Solved using M/06 M/08

  • Error while adding condition Imports PO

    Dear Sir,
    We want add Freight charges and Custom Clearing Charges in Imports PO as Misc. Charges in condition ZMIS.
    But we try to add these as 3 % it gives following error
    Provision account key missing for condition type ZMIS in schema ZHILI1
    Message no. ME172
    Please suggest me the solution.
    Thanks & Regards
    Vishal

    Hi Vishal,
    the message ME172 was implemented because the system can not
    enter the delivery cost into an account without account key. Now the
    message occurs for PO's created in  older releases(schema without
    account key for condition ). It will also occurs if it is a statistical
    condition and in new POs.
    You can schwitch this message into an Warning message until the old
    POｴs are 'finished'.
    You can change it using transaction OME0.The menu path in IMG is
    Materia ls Management ->Purchasing ->Environment Data ->Define Attribute
    Of System  Messages.You can either change it to a warning message "W"
    or switch it off by making an entry"-".
    Thanks and regards,
    Polly

  • Error while adding set type to CRM Web UI(7.0)

    Hi Gurus,
    I was trying to add the custom set type to the product screen in Web UI . Followed the steps narrated in
    http://wiki.sdn.sap.com/wiki/display/CRM/CreatingUIConfigurationforSetTypestodisplayonCRMProductOverviewpage.
    Now the URL assignment Block is appering in lazy load. When I try to open I am getting the error
    Diagnosis
    An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
    Exception Details
    CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'ZURLSETTYPE'
    Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
    Source Text Row: 20
    Is this a prob in customization or something else?
    Please help
    Thanks,
    Neeraj

    Hi Neeraj,
    It looks like you have created a custom compenent "ZURLSETTYPE". If it is the case please check in Run time repository for component "PRD01OV". Check if component usage of newly created component is defined, not then define it and see the result. this may help.
    This doent work then please elaborate what you have done littile more.
    Thanks & Regards,
    Amit

  • Error while adding content type fields in the EditForm.aspx for an customlist item.

    This is office 365. I have content type which is attached to custom list.
    Added new site column "CustomerAction" which was added to Content type, now when I added this field in the EDITForm.aspx using the SharePoint designer, this form is called when the custom list item is being edited.
    But when I added this extra field to EDITFORM.aspx it is giving error,. the standard correlationid error.
    Can anyone suggest, what could be problem !
    Thanks
    Labhesh
    Labhesh Shrimali

    Hi Labhesh,
    When we add the site column to the content type, there is an option to update the all
    content types which inheriting from this type.
    If we set this to Yes, then the site column will be added to the list where the content type or its child content type has been used and this column will be added to the EDITFORM.aspx too.
    So we don’t need to re-add this site column to EDITFORM.aspx.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Error while adding principal to a process

    Hi All,
    I am getting the following error while adding security principal to Task Manager for my process,
    Caused by: | [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClie
    nt] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCExceptio
    n is Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000: co
    m.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerServ
    ice not found.chainedExceptionMessage:Service: DirectoryManagerService not found
    . chainedException trace:ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotF
    oundException: Service: DirectoryManagerService not found.
    at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getServic
    e(ServiceRegistryImpl.java:972)
    at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getHeadAc
    tiveConfiguration(ServiceRegistryImpl.java:830)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.resolveConfiguration(
    ServiceEngineImpl.java:146)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:58)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMes
    sage(AbstractMessageReceiver.java:88)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessa
    geDispatcher.java:210)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(A
    bstractMessageDispatcher.java:57)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:2
    08)
    at com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient.
    findPrincipals(DirectoryManagerServiceClient.java:835)
    at com.adobe.repository.ui.aac.commands.FindPrincipalsCommand.execute(Fi
    ndPrincipalsCommand.java:127)
    at com.adobe.repository.ui.aac.commands.CommandProcessor.execute(Command
    Processor.java:56)
    at com.adobe.repository.ui.aac.struts.actions.FindPrincipalsAction.execu
    te(FindPrincipalsAction.java:115)
    at com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction.exe
    Any help is greatly appreciated.
    Thanks
    Raghu

             I am using RHEL 5 - 64 bit Linux on 3-Tera Virtual host with Java 5,MySQL and  adobe pre-configured Jboss 4.2 to install LiveCycle 8.2 and My intension is to get the Rights Management Service Installed  . After configuring the .ear files(using Rights Management alc-lfs not excluded-solution component  in the LCM CLI properties file ) and running the Jboss , I get the Jboss Running but with following Error
    ERROR  [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public  abstract java.lang.Object  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.do RequiresNew(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.ds c.transaction.TransactionCallback)  throws com.adobe.idp.dsc.DSCException:
    ALC-DSC-000-000:  com.adobe.idp.dsc.DSCRuntimeException: Internal  error.
            at  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:249)
            at  sun.reflect.NativeMethodAccessorImpl.invoke0(Native  Method)
    Caused by:  java.lang.NoClassDefFoundError:  com/adobe/dctmconnector/config/DctmConnectorConfigBean
            at  java.lang.Class.getDeclaredConstructors0(Native  Method)
            at  java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
            at  java.lang.Class.getConstructor0(Class.java:2671)
            at  java.lang.Class.newInstance0(Class.java:321)
            at  java.lang.Class.newInstance(Class.java:303)
            at  com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$12.doInTransact ion(ComponentRegistryImpl.java:877)
            at  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:218)
            ... 199  more
    2009-06-16 10:23:02,554 ERROR  [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason:  Internal error.
    2009-06-16 10:23:02,554 WARN   [com.adobe.idp.dsc.startup.DSCStartupServlet] Unable to start the  DSCManager
    and upon running the deploy liveCycle Component using LCM CLI task
    ./ConfigurationManagerCLI.sh  deployLiveCycleComponets -f cli_propertyFile.txt
    I see that few of  DSCs (especially the adobe-usermanager-dsc ) were  never started by the installer and It stopped throwing Exceptions While trying to deploy  adobe-rightsmanagement-jboss-dsc.jar.
    Progress: [5%,    DSC already  installed, but is not started  adobe-remotingConnector-dsc.jar]
    Progress: [8%, Deploying DSC    adobe-usermanager-dsc.jar]
    Progress: [8%,    DSC already  installed, but is not started  adobe-usermanager-dsc.jar]
    Progress: [11%, Deploying DSC    adobe-usermanager-util-dsc.jar]
    Progress: [11%,    DSC already  installed, but is not started  adobe-usermanager-util-dsc.jar]
    Progress: [14%, Deploying DSC    adobe-jobmanager-dsc.jar]
    Progress: [14%,    DSC already  running adobe-jobmanager-dsc.jar]
    While LCM CLI tries to install  RightsManagement DSC following exceptions are  thrown
    [2009-06-16 10:47:16,604], INFO,  main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, DSC not installed.  DSC will now be installed: com.adobe.livecycle.RightsManagement  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar
    [2009-06-16 10:47:32,227], SEVERE,  main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Failed to deploy  component  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
    com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-030-200]:  \ to deploy component  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
            at  com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCFiles(DeployDSCs .java:396)
            at  com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCs(DeployDSCs.jav a:149)
    Caused by:  com.adobe.idp.common.errors.exception.IDPSystemException: nullorigin: |  [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient]  errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCException is  Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000:  com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.chainedExceptionMessage:Service:  DirectoryManagerService not found. chainedException trace:ALC-DSC-012-000:  com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.
    I tried to look for adobe-usermanager-dsc in the admin UI but did not find one over there . I even tried copying the adobe-usermanager-dsc.jar to pre-configured Jboss server/all/lib directory but that does'nt makes a difference .
    I was suggested to use different combinations of excluded solution  components in the cliProperties file
    When I used the following list of   excludedSolutionComponents  I did not see the (ERROR  [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason:  Internal error.) but still the dobe-usermanager-dsc does not starts and I get the same errors of (com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.) when the LCM CLI reaches installing the Rights Management DSC.
    excludedSolutionComponents=ALC-LFS-BusinessActivityMonitoring,ALC-LFS-ConnectorI BMContentManager,ALC-LFS-ContentServices,ALC-LFS-PDFGenerator,ALC-LFS-ProcessMan agement
    #,ALC-LFS-RightsManagement,ALC-LFS-BarcodedForms,ALC-LFS-DigitalSignatures,ALC-L FS-Forms,ALC-LFS-Output,ALC-LFS-PDFGenerator3D,ALC-LFS-ReaderExtensions,ALC-LFS- ConnectorEMCDocumentum,ALC-LFS-ConnectorIBMFileNet
    Any help on this issue will be highly obliged.
    Thank you.
    Mohammad

  • Error while adding a custom field with Input help via AET

    Hi All,
    I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
    One field is required to have the input search help f4 and autopopulates the second field
    I am able to add one field(not requiring help) successfully through AET .
    I have created one Zsearch_help in se11 and its successfully running  and Autopopulating seocnd field while I am testing it
    While adding second field through AET,I need to enter following details as -
    field label,search relevant ,serach help etc.
    When I type the name of my 'Zsearch_help' against field search help it gives me following error
    'Search help is not compatible'.
    Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
    Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
    Please help me out.Kindly be detailed as I am new to SAP CRM.
    Thanks,
    Shivani

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • Error while adding a record

    I am getting the following error while adding record into the table CM_RECIPE_ITEM :
    <h4> Error </h4>
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
         Error      Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
    Thanking You,
    Yogesh
    <h4> CM_RECIPE_ITEM Table </h4>
    CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
    625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
    626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
    <h4>Global temporary table</h4>
    DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
    CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
    ROW_ID ROWID
    ON COMMIT PRESERVE ROWS
    NOCACHE;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    BEGIN
    INSERT INTO interim VALUES (:new.rowid);
    END;
    <h4>Trigger to update data on CM_RECIPE table </h4>
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
    AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    BEGIN
    FOR ds IN (SELECT row_id FROM interim) LOOP
    UPDATE CM_RECIPE
    SET CR_RMC = (
    SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = CR_BOM_CODE
    AND rowid = ds.row_id
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (
    SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id
    ) + CR_RMC;
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN =
    (SELECT CIFG_DP_RATE
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
    END LOOP;
    END;
    /

    The scripts of the tables CM_ITEM_FG, CM_RECIPE, CM_RECIPE_ITEM are as follows :
    <h4>CM_ITEM_FG</h4>
    ALTER TABLE COSTMAN.CM_ITEM_FG
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_ITEM_FG CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_ITEM_FG
    CIFG_CODE VARCHAR2(13 BYTE) NOT NULL,
    CIFG_CCG_ID NUMBER NOT NULL,
    CIFG_NAME VARCHAR2(50 BYTE) NOT NULL,
    CIFG_PACKING NUMBER NOT NULL,
    CIFG_OVERHEAD NUMBER NOT NULL,
    CIFG_OTHERS NUMBER NOT NULL,
    CIFG_DP_RATE NUMBER NOT NULL,
    CIFG_CR_BY VARCHAR2(32 BYTE),
    CIFG_CR_ON DATE,
    CIFG_UPD_BY VARCHAR2(32 BYTE),
    CIFG_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_PK_001 ON COSTMAN.CM_ITEM_FG
    (CIFG_CODE, CIFG_CCG_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_UK_001 ON COSTMAN.CM_ITEM_FG
    (CIFG_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_ITEM_FG_T1"
    BEFORE UPDATE ON "CM_ITEM_FG"
    FOR EACH ROW
    BEGIN
    BEGIN
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (CR_RMC + :NEW.CIFG_PACKING + :NEW.CIFG_OVERHEAD + :NEW.CIFG_OTHERS);
    END;
    BEGIN
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN = (:NEW.CIFG_DP_RATE - CR_TOTAL_COST) / CR_TOTAL_COST;
    END;
    END;
    ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
    CONSTRAINT CM_ITEM_FG_PK_001
    PRIMARY KEY
    (CIFG_CODE, CIFG_CCG_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    CONSTRAINT CM_ITEM_FG_UK_001
    UNIQUE (CIFG_CODE)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
    CONSTRAINT CM_ITEM_FG_FK_001
    FOREIGN KEY (CIFG_CCG_ID)
    REFERENCES COSTMAN.CM_COST_GROUP (CCG_ID));
    <h4>CM_RECIPE</H4>
    ALTER TABLE COSTMAN.CM_RECIPE
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_RECIPE CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_RECIPE
    CR_ID NUMBER NOT NULL,
    CR_CCG_ID NUMBER,
    CR_EFF_FROM DATE,
    CR_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
    CR_BOM_CODE VARCHAR2(50 BYTE),
    CR_QUANTITY NUMBER,
    CR_RMC NUMBER,
    CR_TOTAL_COST NUMBER,
    CR_GROSS_MARGIN NUMBER,
    CR_CR_BY VARCHAR2(32 BYTE),
    CR_CR_ON DATE,
    CR_UPD_BY VARCHAR2(32 BYTE),
    CR_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_PK_001 ON COSTMAN.CM_RECIPE
    (CR_CCG_ID, CR_ID, CR_CIFG_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_001 ON COSTMAN.CM_RECIPE
    (CR_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_002 ON COSTMAN.CM_RECIPE
    (CR_BOM_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_T1"
    BEFORE INSERT ON "CM_RECIPE"
    FOR EACH ROW
    DECLARE
    L_ID NUMBER;
    BEGIN
    IF INSERTING THEN
    IF :NEW.CR_ID IS NULL THEN
    --SELECT CM_RECIPE_SEQ.NEXTVAL INTO L_ID FROM DUAL;
    :NEW.CR_ID := CM_RECIPE_SEQ.NEXTVAL; --L_ID;
    END IF;
    :NEW.CR_CR_ON := SYSDATE;
    :NEW.CR_CR_BY := nvl(v('APP_USER'),USER);
    END IF;
    IF UPDATING THEN
    :NEW.CR_UPD_ON := SYSDATE;
    :NEW.CR_UPD_BY := nvl(v('APP_USER'),USER);
    END IF;
    END;
    ALTER TABLE COSTMAN.CM_RECIPE ADD (
    CHECK ("CR_EFF_FROM" IS NOT NULL) DISABLE,
    CHECK ("CR_CCG_ID" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CONSTRAINT CM_RECIPE_PK_001
    PRIMARY KEY
    (CR_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    CONSTRAINT CM_RECIPE_UK_002
    UNIQUE (CR_BOM_CODE)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    <h4>CM_RECIPE_ITEM</H4>
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_RECIPE_ITEM CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_RECIPE_ITEM
    CRI_ID NUMBER NOT NULL,
    CRI_CR_ID NUMBER NOT NULL,
    CRI_BOM_CODE VARCHAR2(50 BYTE) NOT NULL,
    CRI_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
    CRI_CIRM_CODE VARCHAR2(10 BYTE) NOT NULL,
    CRI_SEQ NUMBER,
    CRI_QTY NUMBER,
    CRI_RM_COST NUMBER,
    CRI_CR_BY VARCHAR2(32 BYTE),
    CRI_CR_ON DATE,
    CRI_UPD_BY VARCHAR2(32 BYTE),
    CRI_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_ITEM_PK_001 ON COSTMAN.CM_RECIPE_ITEM
    (CRI_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T2"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    FOR EACH ROW
    BEGIN
    IF :NEW.CRI_CR_ID IS NULL THEN
    SELECT CR_ID INTO :NEW.CRI_CR_ID
    FROM CM_RECIPE
    WHERE CR_BOM_CODE = :NEW.CRI_BOM_CODE;
    END IF;
    END;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T1" BEFORE
    INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    DECLARE
    L_ID NUMBER;
    SEQ NUMBER;
    BEGIN
    IF INSERTING THEN
    IF :NEW.CRI_ID IS NULL THEN
    SELECT CM_RECIPE_ITEM_SEQ.NEXTVAL
    INTO :NEW.CRI_ID
    FROM dual;
    END IF;
    :NEW.CRI_CR_ON := SYSDATE;
    :NEW.CRI_CR_BY := NVL(v('APP_USER'),USER);
    SELECT (NVL(MAX(CRI_SEQ),0)+1)
    INTO SEQ
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = :NEW.CRI_BOM_CODE;
    :NEW.CRI_SEQ := SEQ;
    END IF;
    IF UPDATING THEN
    :NEW.CRI_UPD_ON := SYSDATE;
    :NEW.CRI_UPD_BY := NVL(v('APP_USER'),USER);
    END IF;
    END;
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
    CHECK ("CRI_RM_COST" IS NOT NULL) DISABLE,
    CHECK ("CRI_QTY" IS NOT NULL) DISABLE,
    CHECK ("CRI_SEQ" IS NOT NULL) DISABLE,
    CONSTRAINT CM_RECIPE_ITEM_PK_001
    PRIMARY KEY
    (CRI_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
    CONSTRAINT CM_RECIPE_FK_002
    FOREIGN KEY (CRI_CIRM_CODE)
    REFERENCES COSTMAN.CM_ITEM_RM (CIRM_CODE),
    CONSTRAINT CM_RECIPE_ITEM_FK_001
    FOREIGN KEY (CRI_CR_ID)
    REFERENCES COSTMAN.CM_RECIPE (CR_ID));
    Yogesh

  • Error while adding Image: ORA-00001: unique constraint

    Dear all,
    I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
    Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
    Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
    Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
    Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
    Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
    Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
    Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
    Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
    Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
    Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
    Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
    Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
    Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
    Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
    Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
    Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
    I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
    One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
    BR
    Roman
    Edited by: Roman Becker on Jan 13, 2009 12:59 AM

    Hi Ritam,
    For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
    For now I will close this thread as unanswered.
    SAP SRM Moderators.

  • Error while adding record

    I am getting the following error while adding record into the table CM_RECIPE_ITEM :
    Error
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
    Error Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
    Thanking You,
    Yogesh
    CM_RECIPE_ITEM Table
    CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
    625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
    626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
    Global temporary table
    DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
    CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
    ROW_ID ROWID
    ON COMMIT PRESERVE ROWS
    NOCACHE;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    BEGIN
    INSERT INTO interim VALUES (:new.rowid);
    END;
    Trigger to update data on CM_RECIPE table
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
    AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    BEGIN
    FOR ds IN (SELECT row_id FROM interim) LOOP
    UPDATE CM_RECIPE
    SET CR_RMC = (
    SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = CR_BOM_CODE
    AND rowid = ds.row_id
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (
    SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id
    ) + CR_RMC;
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN =
    (SELECT CIFG_DP_RATE
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
    END LOOP;
    END;
    /

    yogeshyl wrote:
    Error
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
    Error Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.The error message points to the trigger...

  • Error while adding member to the dag in exchange 2013 sp1

    I have Windows Server 2012 Std Edition with Exchange 2013 SP1 and get the following error while adding member to the dag either i do it using EAC or the powershell
    Senior Technical Consultant, MDS Computers

    When running set-databaseavailabilitygroup Exchange-dag without parameters, it crashes again:
    [PS] C:\Windows\system32>Set-DatabaseAvailabilityGroup exchange-dag
    WARNING: An unexpected error has occurred and a Watson dump is being generated: Some or all identity references could not be translated. Some or all identity references could not be translated.
        + CategoryInfo          : NotSpecified: (:) [Set-DatabaseAvailabilityGroup], IdentityNotMappedException
        + FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.Exchange.Management.Syste
       mConfigurationTasks.SetDatabaseAvailabilityGroup
        + PSComputerName        : <server>
    Also, this is logged in the eventlog:
    Watson report about to be sent for process id: 7424, with parameters: E12, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangePowerShellAppPool, M.Exchange.Management, M.E.M.C.FileShareWitness.Create, S.S.Principal.IdentityNotMappedException, 3e5c, 15.00.0847.031.
    ErrorReportingEnabled: True 
    Definitely looks like a problem creating the filewitness share.
    Frank.

  • Error while adding A/P Credit Memo!

    Error while adding A/P Credit Memo..........
    'G/L Accounts' (OACT) (ODBC-2028) Message - 131-183
    Please advice me .....
    Thanks...

    Hi
    Check this thread this may help you.
    [Re: AP Invoice - No Matching Account Error]
    Regards
    Balaji

  • Error while adding a connector for SSL..help!!!

    i'm getting this error when i added a connector for SSL and restarted tomcat
    my connector tag is
    <Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
          <Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
        </Connector>
    LifecycleException:  Protocol handler instantiation failed: java.lang.NullPointe
    rException
            at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
    java:1368)
            at org.apache.catalina.core.StandardService.initialize(StandardService.j
    ava:609)
            at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
    a:2384)
            at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
            at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
            at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • Error while adding a job to scheduler

    Hello,
    I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
    Thanks.
    [Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
    When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.

    Hi Rizwan Tahir  ,
    Delete the job server associated with the current batch job and recreate it.
    Then try creating a new schedule using the new job server.
    And take care that job server is created in QA environment.
    Hope this should work.
    Regards,

Maybe you are looking for