Recognize / OCR Thai pdf in Acrobat Pro 10.1.9

I have wasted an hour trying to install a language pack and change my installation but have failed.
I am not even sure it is possible on this version of Acrobat but I want Thai as a Primary OCR Language setting in order to recognize the text in a scanned PDF.  Please help?
Kind regards
John

Thanks for your response.
So Acrobat Pro can recognize certain languages (Hebrew, Chinese etc) and these are configured during the installation process but there are no 'language packs' I can install to OCR Thai?
Any suggestions how one might recognise the text in order for it to be copied and pasted etc?

Similar Messages

  • Is it possible to edit a pdf with Acrobat Pro XI that was created in LiveCycle?

    I downloaded a trial version of LiveCycle awhile back. I created several forms. The trial period ended and I would like to change something. When I try to edit the pdf in Acrobat Pro it tells me that I must use LiveCycle to edit it. Is there a workaround for this? Thank you in advance for any replies.
    Dana

    No, all LCD forms can only be edited in LCD.
    And the second trial is probably not going to work, unless you install it
    on a different computer.
    The best way to salvage your form, in my experience, is to print it to the
    Adobe PDF printer, creating a new flat PDF file and then running the Form
    Detection Wizard in Acrobat on it and continuing from there. It probably
    won't do a perfect job, but it should recognize some of the fields.
    On Wed, Feb 4, 2015 at 11:00 PM, Adobe Forums <[email protected]>

  • How to save an edited PDF in Acrobat Pro without any compression

    Hi,
    I just edited an existing PDF in Acrobat Pro 9 - actually I inserted some high resolution images in TIFF via the Touchup tool.
    What do I have to do to save it without any compression of the TIFFs - I tried a lot, but the outcome is always compressed, showing artifacts.
    Thanks

    First, editing PDFs is really only for minor fixups. There is generally no word wrap or such when doing such editing and often then seem to go downhill fast. To edit text, you have to have the font available. If the file was scanned and the OCR applied was searchable text, the only option to edit what is displayed is with a graphics editor, typically PhotoShop. PhotoShop allows Acrobat to have edited graphics and then be reinserted in the file (I don't do it, so can't give details). ClearScan replaces what is seen on screen in the graphic with the text. In that case, you see all of the text and the corresponding errors (often many). You may want to load a graphic (bitmap) with text showing or use a scan and try the various versions of OCR to see what I am talking about. That may help you see the options. Searchable PDFs is more useful if an original is critical, such as in the legal profession.

  • When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

    Hello,
    When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
    The steps I’m following are described below:
    1.    Insert electronic signatures
    - In Tasks, click on “Add New Field -> Digital Signature”.
    - Move the square to the place where you want to put the signature and click.
    - Fill in the “field name” with the name of the person who has to sign here.
    - When it is done, click anywhere on the screen.
    - In Tasks, click on “Close Form editing”.
    - Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
    - Fill in the file name and click on “Save”.
    2.    Save the Form
    - In Tasks, click on “Close Form editing”.
    - Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
    - Fill in the file name and click on “Save”.
    I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
    Here's a screenshot of the problem.
    Thanks a lot.
    Gael

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Problem printing PDF with Acrobat Pro 9.4.4

    Hi!
    I can't correctly print a PDF with Acrobat Pro that was created in Indesign CS5.
    I want to print it on a letter format (8,5 X 11") and it offers me a format of 8,49 X 10,99". It results in having my document being printed as tile with it's original format 12 X 21,5" as if I didn't adjust the format to be reduced.
    I temporary used Preview to print my PDF, but now I can't as the encoding in which I received the PDF used to be "Creo Normalizer JTP" and now it is "Adobe PDF Library 9.9"
    If anyone can help!
    This is my first time here, thanks in advance for your help

    Here's what it looks like (I work in french, hope you can understand)
    I just updated my software, thanks for that!
    Now, my problem is still on... I still have the very same result when I print. I did selected the correct Page Scalling I needed. I did selected the paper size I wanted. I chose Shrink to Printable Area and I tried with Fit to Printable Area.
    Since I've had this problem the size appears as : 8,49 X 10,99 (Instead of 8,5 X 11). I tried with Legal (8,5 X 14) but it appears as 8,49 X 13,99. I went through the preferences, but I can't find anything that could be the problem.
    Any other idea?
    Thanks!!
    Also, Preview was very helpful, as it did print my PDF correctly! I understand it's not the best... but it did the job

  • How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    Hi URT301,
    Please see this document: PDF Ownership when Reader X is Installed with Acrobat. You'll find several solutions to this problem in the FAQ section.
    Please let us know how it goes.
    Best,
    Sara

  • How to embed a mp4 video into a pdf with acrobat pro XI?

    I'm  trying to embed a mp4 video into a pdf using Acrobat Pro XI.  When I try to play the video, all I see is a black box. The video is H.264 codec. I've tried on a PC and Mac and get the same results.

    Video playback in the Acrobat Family uses Flash Player, so if it works in FP (loaded via an HTML page) then it should work in your PDF. First suggestion is to use the free MediaInfo tool to check exactly what the internal structure reports as.

  • Please advice on adding 3D-animation files into a PDF with Acrobat Pro DC.

    Hello,
    Where is the button animation in Acrobat Pro DC?
    Can you give me advice on adding 3D-animation files into a PDF with Acrobat Pro DC.
    I have Acrobat PRO DC .
    Thank you.

    Hi George,
    I just tried adding the files as attachments; however I didn't like doing that because it increased the file size of my PDF document quite a bit. 
    I'm not sure if you're familiar with the "Insert Object" command in MS Word, but I want to do the same thing in my PDF document...but the key is, anyone must to be able to open the embedded file from any location.
    I created an MS Word document with several embedded objects.  I was later asked to PDF the Word document, but since embedded MS Word objects do not migrate to the PDF, I am now trying to embed the same files I embedded into my Word document into my PDF document over top of the icon image.  The file types I'm trying to embed include MS Word, Excel, PowerPoint, and Adobe PDF.  Does this make more sense?  I want to create a hyperlink over top the icon image that was PDF'd from the MS Word document which allows any user to click on the link and open the separate file.

  • Can not create hi res pdf in Acrobat Pro v9 - distiller

    I am having problems creating a high res PDF in Acrobat Pro 9.0, it looks like distiller will not remember or accept that I am selecting hi res definitions before I print from Quark v6.0.

    You're better off asking in the SDK forum:
    http://forums.adobe.com/community/acrobat/acrobat_sdk

  • Print only cursor-selected area of a PDF in Acrobat Pro, just as it is psbl to do in a browser

    Hi
    I want to print only cursor-selected area of a PDF in Acrobat Pro. That could be both text and images, which are in my selection. Just as it is psbl to do in a browser. Is it possible in Acrobat PRO?
    I am using the latest Acrobat Pro 11.0.9

    Thanks for your effort but this again clearly does NOT answer my question. I do see a particular problem and that is that I might want to select text and images over a range of multiple pages. In a doc of 20 pages I might want to make a single selection of the text starting PRECISELY at the MIDDLE of page 2 and then continue dragging my selection all the way to PRECISELY the MIDDLE of page 15, thereby selecting all text and images within the precise range of my selection. That is some 13 pages there and I want to print out ONLY THAT selection of text and images. And in that case I cannot use your suggestion with the marquee zoom. Do you get me?

  • How do you edit document text in pdf in Acrobat Pro 11 Mac?

    How do you edit document text in pdf in Acrobat Pro 11 Mac? I know I can do it in the Windows version, but can't find same tool in Mac.

    Should be the same but it isn't. I have included a screenshot of my tools choices in both my Mac and PC versions - they are totally different.
    Mac version
    PC Version

  • Acrobat X recognizes text in PDF while Acrobat XI does not

    At my work I receive weekly bookmarked PDFs that are a mix of pages, some with renderable text and some just scans, which I run the "recognize text" feature of Acrobat Pro on to OCR and properly rotate the scanned pages so they can be marked up. I recently upgraded to Acrobat Pro XI from X. However, running "recognize text" on these PDFs no longer does anything, as Acrobat Pro XI says that all of the pages contain renderable text. I had a co-worker try Acrobat X on the same file, worked fine. I've also tried using a different installation of Acrobat Pro XI (not only on another computer but a different platform as well), and encountered the same problem as mine. Any suggestions? This has happened two weeks in a row now, am thinking of going back to Acrobat Pro X if I can't get this sorted out. Thanks in advance for any help.

    At my work I receive weekly bookmarked PDFs that are a mix of pages, some with renderable text and some just scans, which I run the "recognize text" feature of Acrobat Pro on to OCR and properly rotate the scanned pages so they can be marked up. I recently upgraded to Acrobat Pro XI from X. However, running "recognize text" on these PDFs no longer does anything, as Acrobat Pro XI says that all of the pages contain renderable text. I had a co-worker try Acrobat X on the same file, worked fine. I've also tried using a different installation of Acrobat Pro XI (not only on another computer but a different platform as well), and encountered the same problem as mine. Any suggestions? This has happened two weeks in a row now, am thinking of going back to Acrobat Pro X if I can't get this sorted out. Thanks in advance for any help.

  • OCR not working with Acrobat Pro X

    I have Acrobat Pro X ver 10.1.9 using Windows 7 Pro (64 bit) OS running in a virtual environment (Parallels ver 9.0) on a MacBook Pro. I have 16 GB of System Memory and 6 CPU's dedicated to the virtual environment. For some reason: 1. I cannot select renderable text with my cursor in a pdf containing such (i just see the cursor turn to a hand symbol as if to use the cursor to move the image around;  and  2. I can run Acrobat's OCR on a recently scanned pdf but once again I cannot select the text (same hand symbol appears). I went to Control Panel -  Programs and selected "Repair" the Acrobat program but this was no help.  What I don't understand is prior to installing my Acrobat Pro X program on this computer I had it installed on a PC running Windows 7 Pro (32 bit) and everything worked fine. Any ideas?  WR
    02/10/14 Update: Spoke with Adobe Tech Support and they informed me the problem I am having with the windows version of Acrobat Pro X above is caused by running the program in the Parallels virtual environment on a Mac. This is odd as the purpose of running Parallels on the Mac is so that one can operate the Windows OS and programs on a Mac. They suggested I purchase the Pro XI version for Mac.

    "Copy C:\ProgramFiles (x86)\adobe\acrobat 9.0\acrobat\plug-ins\PaperCapture\* to the parent directory C:\ProgramFiles (x86)\adobe\acrobat 9.0\acrobat\plug-ins
    For Acrobat X, the path would be acrobat 10.0."
    IT WORKS!!! Hey thanks dodland, now all I have to do is get my CS6 MC installer to take less than X hours to install just a version of Acrobat X that will recognize my MC serial number! I installed a version of Acrobat 10 from the MC extracted files and ran it as a trial, no go on the OCR. Then I did your copy suggestion and all is well. I've copied this fix as a text file to live with my MC install files. Now I just have to get a activated version running.
    Thanks again, as I was considering wiping the entire drive just to fix this single issue and that would not be fun...
    TLL

  • Editing a Form Central PDF in Acrobat Pro

    I've created a multi-page form with F Central and need it to be editable in Acrobat Pro.  "Save a Copy" in Acrobat Pro does not remove the security and thusly the form cannot be edited.  Was I misled by Acrobat marketing and now I am stuck with a form that I can ONLY edit using Forms Central?   Can anyone help?

    I don't know if I was very clear.  I want the users to fill out a form and click a button when they are done.   Then I want the result of clicking the button to be for the form to print to Adobe PDF first followed by emailing to me.  Right now the way I set the button up (below), I receive the actual form via email. 
    "Actions" tab,
    "Mouse up,
        Execute a menu item
            File>Save as>PDF...
        Submit a form"
    I want a non editable printed/ refried version AKA "print to Adobe PDF" on the menu items sent to me instead of the actual form.  I have searched all over but can't find if this is possible.

  • How Can I Create a Print Button on a PDF Using Acrobat Pro That Will Also Work on iOS?

    I created a Print Button on a PDF document using Adobe Acrobat Pro on my Mac.  The Print button works perfectly on different browsers on my Mac and on Windows (running under Parallels Desktop) as well.
    When I open the document on my iPad the Print button doesn't even appear.  I am guessing that this is a Flash issue but it may be more related to the fact the the action for the button is to access the Print menu item, which doesn't exist under iOS.
    Is there any way to create a Print button using Acrobat Pro that will work on a Mac and Windows but also on iOS?

    In order to initiate printing by clicking a button, the button has to have either an "execute menu item" type action or use the "print" JavaScript method. As you guessed, the former won't work since there are no menu items to execute, and the latter can only work if the particular PDF viewer you're using supports it. I'm not aware of any that do on iOS.
    The button doesn't appear because you're probably opening it in the default PDF viewer, which doesn't support forms at all. If you were to open the form in Adobe Reader, you'd see the button but it wouldn't work.

Maybe you are looking for

  • 5th gen iPod Touch crashes spontaneously

    Hi there My 5th Gen iPod Touch crashes at random times, usually when on wifi.  When it does this, it resets my clock by ten or twenty or thirty minutes and I have to fix the time because it does not automatically restore via the Internet.  I tried re

  • BufferedReader Problem (inserting space after every character)

    (This is a message I sent to an Aglet forum, however I thought maybe someone here could help me with the BufferedReader problem...with the spacing...read below) -Blake ok here's what I'm attempting to do. I have a Master Aglet that creates a slave wh

  • Rotate during Slide to unlock will lock again

    When waking my iPad (4th gen) it often takes some time before the correct device orientation is recognised and the screen rotates appropriately. If this happens during or right after I slided to unlock my iPad, it will rotate and again present the "s

  • Question about Access Point

    Hello In my work, we have two WAP4410N Wireless-N Access Point with Power Over Ethernet, but ¿how many users support each access point? And, somebody knows how I can configure the two access point to be viewed as one in all laptops? Normally, the lap

  • Hashing Passwords

    Ok, Here's my code that I recieved from a friend...but....My DB isn't updating. Am I missing a step? <!--- Retrieve the existing users so we can loop them and update their password with its equivalent hashed value. ---> <cfquery name="myQuery" dataso