Recognize the install CD..?

I purchased Elements 11 & Premiere Elements 11 & my laptop will not recognize the install CD.. Thoughts on what may be the reason?

Incase, you still are facing the issue, would you like to try downloading the trial version from adobe.com & then use the serial key during of after intallation?
I hope that serves your purpose.

Similar Messages

Why won't my MacBook recognize the install disk?

Why won't my Macbook recognize the install disk? I want to run the Apple Hardware Test, but the computer will not boot from the install disk, it keeps ejecting the disk.

Several possibilities -
The disk may be from a different model of computer.
The disk itself may be damaged.
The optical drive in your MacBook may have gone bad. Can it read other DVDs?

Konqueror and dolphin do not recognize the installed servicemenu

I am using KDEmod4 and found that konqueror and dolphin do not recognize the servicemenu installed in the following paths by krename4 and acetoneiso2:
/usr/share/apps/dolphin/servicemenus/
/usr/share/apps/d3lphin/servicemenus/
/usr/share/apps/konqueror/servicemenus/
However, servicemenus in the following path are successfully recognized by konqeror and dolphin:
[/usr/share/kde4/services/ServiceMenus
Is this a KDEmod issue or a general KDE issue? Feedback from other KDE users is greatly appreciated.

marusot
Google Translate from English to Korean
당신이 프리미어 요소 (11)와 현 버전이 아닌 12을 가지고 있기 때문에 어도비 채팅 당신을 도울 경우, 나는 확실하지 않다. 그러나, 그것은 것입니다 있는지 확인하기 위해 어도비와 어도비 채팅에 도달하기 위해 시도하십시오.
http://helpx.adobe.com/contact.html?step=PRE_adobe-ID 서명 - in_stillNeedHelp
어도비 채팅이 도움이되지 않을 경우, 우리는 여기에 우리가 할 수있는 최선으로 도움을 시도 할 수 있습니다.
당신은 1 사용중인 컴퓨터 운영 시스템?
2 당신이 프로그램을 다시 설치하는 경우 비활성화 바이러스 백신 프로그램과 컴퓨터의 방화벽 (들)이 있습니까?
우리는 당신의 결과를보고 할 것이다.
감사합니다.
ATR
English Version of the Above
Since you have Premiere Elements 11 and not the current version 12, I am not sure if Adobe Chat will help you. But, please try to reach Adobe and its Adobe Chat to find out if it will.
http://helpx.adobe.com/contact.html?step=PRE_adobe-id-signing-in_stillNeedHelp
If Adobe Chat does not help you, we can try to help here as best we can.
1. What computer operating system are you using?
2. Do you have the antivirus program and firewall(s) of the computer disabled when you are reinstalling the program?
We will be watching for your results.
Thank you.
ATR

Mac does not recognize the install DVD

I can not get the install DVD to work. I am running a G5 1.6 GHZ, 1.5 GB ram and OS X 10.3.9.
Tried just about everything, but it will not open on the desktop. Tried a restart with it in the drive holding down the C key but it just ejects the DVD.
What y'all think?
Thanks.

Reply to all;
I can open other DvD's with the drive. It is OK. I purchased this from macmall in Dec, just got enough nerve to install it. It does have a few little scratches on it though. Could they have sold me a used one?

I can't seem to get my Windows 7 Box to "see" the NAS where my music and movies are stored. This ran fine on W XP. After I installed iTunes on my new machine, I can't get it to "see/recognize" the NAS drive. 5 other computers can. Any Ideas ?

I have a mix of Apple and Windows Boxes. The primary NAS is a 2TB Buffalo Unit. The back-up NAS is a QNAP with 6TBs (set up as Raid 5). Until I removed my old 32 Bit Dell machine today, all the rooms in the house got excellent delivery of audio or video, via Apple TVs, which then run into DACs and amps, and the rest of the gear. The 32 Bit Box was failing on some boots, so I got a new machine. I installed 64 Bit iTunes on it, but cannot get it to recognize the NAS Box. It's like the setting took, as I can see it, however, it "appears" that iTunes is looking elsewhere for the media. I would really prefer not to reload all 850 CDs, and redownload the 56 movies from iTunes.
Is there something that changed in 64 Bit iTunes ? years ago, iTunes would sometimes boot and really want to find the music under Documents and Settings..... but that seemed to sort itself out.
Bill O 6TB

I have a mix of Apple and Windows Boxes. The primary NAS is a 2TB Buffalo Unit. The back-up NAS is a QNAP with 6TBs (set up as Raid 5). Until I removed my old 32 Bit Dell machine today, all the rooms in the house got excellent delivery of audio or video, via Apple TVs, which then run into DACs and amps, and the rest of the gear. The 32 Bit Box was failing on some boots, so I got a new machine. I installed 64 Bit iTunes on it, but cannot get it to recognize the NAS Box. It's like the setting took, as I can see it, however, it "appears" that iTunes is looking elsewhere for the media. I would really prefer not to reload all 850 CDs, and redownload the 56 movies from iTunes.
Is there something that changed in 64 Bit iTunes ? years ago, iTunes would sometimes boot and really want to find the music under Documents and Settings..... but that seemed to sort itself out.
Bill O 6TB

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

Since installing 10.5, Itunes will no longer open automatically when I connect my Iphone or insert a CD. Nor will it, when I insert a CD, recognize the CD unless I close Itunes and open it again. Any ideas?

Since installing 10.5, Itunes will no longer open automatically when I connect my Iphone or insert a CD. Nor will it, when I insert a CD, recognize the CD unless I close Itunes and open it again. Any ideas?

Purchase the Snow Leopard install DVD from Apple to install 10.6
After that uodate to 10.6.8 using Software Update

My ipods are no longer recognized after I installed my Iphone I have 2 ipods that I have music on and still want to use them so how do I get the computer to recognize the ipods again?

I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?

Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone? Doesn't it use to the same iTunes installation you already used with the iPods?
So, I guess my question is, what changed on the computer when you started using the iPhone?
What happens now when you connect the iPod? Is the iPod still seen in Windows device manager?

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

I have a Windows 7 Pro OEM disk that can install either the 32 or 64 bit version. When using version 5.0.3 of Bootcamp, I keep getting the message that it is a 32 bit disk. Any ideas how to get it to recognize the 64 bit version?

I have a Windows 7 Pro OEM disk that can install either the 32 bit or 64 bit versions. When trying to setup a dual boot for my Mac Mini using Bootcamp version 5.0.3, I get the message that I have the 32 bit version of Windows. Any ideas on how I can get it to recognize the 64 bit version so that I can partition my "Mini"?

If by "OEM" you mean the disk came with another Win computer, it won't work. You need either a full retail verison or the "System Builders' Edition." I used the latter for my BC installation and it worked flawlessly and was marked as 64-bit--no mention of 32-bit.

Used Bootcamp to install Windows 7. Now, my macbook pro 13 mid 2009 will not boot back into OSX, there is no Bootcamp utilities like there should be anywhere to be found, and the DVD drive will not recognize the OSX install disk that came with my laptop.

Basically all in the title. Also, some additional info: partition was 115 GBs for Windows, 385 or whatever for OSX (I have a 500 GB Harddrive), I have tried restarting multiple times, and the drive will recognize the DVD, but almost as if the DVD is blank, as it asks me to format it or drag files to it, etc.

Hold your "Option" key down while starting your machine. Continue to hold it down until you are presented with the boot menu which should allow you to select either OS X or Windows (provided you didn't somehow wipe your OS X partition). When you get into OS X, you can go to System Preferences / Startup Disk. Here you can select the default startup partition (OS X or Windows)... when you're installing Windows via BootCamp, it gets changed to Windows so when you finish setting up BootCamp, it automatically reboots and launches the Windows installer. Installing all of the Windows drivers from the OS X DVD should provide you with a Startup Disk option under Windows as well.

Dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk,

dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk, what can I do?

Well I was able to obtain a work around download of Flash and it installed fine but Firefox tells me it needs updating so I go out, thinking I'm "IN" finally to update it and I get that issue of not being able to get the update for it. It's a regular laptop, not a touch screen or one of those new fangled ones for todays world. In fact it's a refurb so it's probably origin date was a year or so ago before all this MS stuff took off fully. So not understanding why I'm feeling like I'm being BLOCKED from getting the updated Flash I need and desire. If I click on the little "X" and tell it to ignore the warning the vid will play just fine but don't want to have to do that every time. Must be a better way.
Again, I'm sorry for posting in the wrong forum, getting this posted in the Flash forum was my desire but the way Adobe has this set up I just couldn't figure it out. I belong to ALLOT of forums and most are pretty straight forward but this one is confusing!

HT1386 I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB

I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

HT1386 I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?

I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone 4S, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?

http://support.apple.com/kb/TS1591

Recognize the install CD..?

Similar Messages

Maybe you are looking for