Recognizing Time Machine with Time Machine

Hello,
I have searched for the last hour and havn't found any information to help my situation.
Excited about being able to wirelessly backup to my AEBS, I plugged my Time Machine drive (which worked flawlessly for months) into my AEBS. It worked! But I didn't care for the speeds, so I unplugged the drive from the AEBS, and plugged it back into my laptop.
Now, when I go to backup, it says 133gb needed for backup, and only 7gb available. So it sounds like it is trying to start all over. Also, in the System Pref for Time Machine, there is a dash for Oldest Backup.
Weird thing is, when I hit the Time Machine logo, all of my backups are still there, and I can restore any file.
How can I get my Time Machine to restore incrementally again without starting from scratch? I have backups that go as far back as December 31st, and do not want to lose these.
Thank you in advance.
-Ryan

No.
You can read ANY time machine backup to restore from it.
To write TO a time machine backup, the software on your Mac must recognize the DRIVE as well as the particular backup set.
The BEST solution is as follows.
REFORMAT the Time Machine drive.
Connect it to the AEBS, making sure to enable password access to the drive.
Connect with an ethernet cable to the AEBS and right-click on the AEBS drive, then select Show Original.
Drag the new "original" icon over to your dock, next to the trashcan, or into the top area of a finder window (under devices). This will make sure that the drive is automatically reconnected when you are in range of the AEBS.
Open Time Machine prefrences, and click Change Disk.
Select the new device.
Backup up your first full backup.
Every subsequent backup should be quick, depending on how much data has changed, and as long as you remember the disk password with your keychain, time machine will automatically grab your stuff when you connect.
Message was edited by: Tony Lewis

Similar Messages

Do you have to use Time Machine with Time Capsule? Time Capsule &Fire Wire?

Does Time Capsule have to be used with Time Machine, or can a user use Time Capsule as a straight foward external hard drive for which to copy files?
Can Time Capsule be linked via USB or Firewire for important data transfers to, and from, a MAC computer?
Thank you in advance for any input.

1. your first question is answered by this paragraph Apple has posted at http://www.apple.com/timecapsule/wireless.html which says:
"Time Capsule with Time Machine in Leopard is the ideal backup solution. But that doesn’t mean Tiger, Windows XP, and Windows Vista users can’t enjoy the benefits of Time Capsule, too. Because it mounts as a wireless hard drive, Tiger and Windows users simply access Time Capsule directly from the wireless network for exchanging and storing files quickly and easily."
2. Time Capsule can not be connected directly to a Mac via USB to transfer files. Time Capsule does not have a Firewire port. All file transfer occurs over a network connection between the Mac and this device. If you have a Mac with a gigabit ethernet port, and you cable it directly to one of the ethernet ports on the Time Capsule, the data transfer will be "pretty fast".
Keep in mind that Time Capsule is a network device designed to share an internet connection, create a wireless network, and provide shared file storage and printing on the network. It is not at all similar to a basic external hard drive.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

HT3275 does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

Error message Pop-up reads:
Time Machine could not complete the backup
The backup disk image "/Volumes/Data-1/myname.sparsebundle" could not be accessed (error - 1)

How to use elapsed time function with state machine in Lab VIEW

Hello
I've been trying to use state machine with elapsed time function in order to sequentially start and stop my code. The arrangement is to start the code for 1 minute then stop for 5 minutes. I've attached the code, the problem is when I place the elapsed time function out of the while loop it doesn't work, on the other hand when I place it inside the loop it does work but it doesn't give the true signal to move to the next state.
Could you please have a look to my code and help me to solve this issue.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
daq assistance thermocouple(sate machine raj).vi ‏436 KB

Rajab84 wrote:
Thanks apok for your help
even with pressing start it keeps running on wait case
could you please explain the code for me, the use of Boolean crossing, increment , and equal functions
Best Regards
Rajab
OK..I modded the example to stop after 2 cycles. Also recommend taking the free online LabVIEW tutorials.
run vi. case statement goes to "initialize", shift registers are initialized to their constants. goto "wait"
"start"= false, stay in current state. If true, transition to "1 min" case
reset elapsed timer with True from shift register(counter starts at zero)."time has elapsed"=false, stay in current state(1 min). If true, goto "5min" case
reset elapsed timer with True from shift register of previous case(counter starts at zero)."time has elapsed"=false, stay in current state(5 min). If true, goto "1min" case. Also, bool crossing is looking for "true-false" from "5 min" compare function to add cycle count.
Once cycle count reaches 2, stop while loop....
Attachments:
Untitled%202[1].vi ‏42 KB

HOW TO SET UP time capsule with time machine?

I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?

What part are you having problems with? You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility). Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.

I can t use my time capsule with time machine. When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

See > Using Time Machine with a Time Capsule
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

Sharing p4014n printer on windows 7 machine with XP machine

I have installed a Laserjet P4014n on a new Windows 7 machine with the USB connection - I allowed it to detect and install the drivers automatically. The printer works great on the Win7 machine.
I shared the printer and would now like to have an XP machine also be able to use it for printing. However when I add a printer and I browse out to the shared printer on the Win7 machine, the XP machine gives the error: "The server for the HP LaserJet P4014/P4015 PCL6 printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise click Cancel..." I tried to find the correct driver (.INF) file on the CD that came with the printer, but it does not seem to like any of the files on the CD.
I have tried to install on the XP machine the drivers using the CD that came with the printer, but because there is not a printer connected, it will not install. I have also downloaded the XP drivers (PCL6 and Universal Printer Drivers for PCL5 and PCL6) for the printer from the HP website, and tried to browse to those when installing the drivers but it still cannot find a file it likes.
What file should I be looking for on the CD or downloaded files for XP?
I also tried to add additional drivers on the Win7 machine but again can not find a file that installs from the CD or downloaded files.

i am having the same problem. the printer is installed on a new windows 7 computer and we are trying to share it to a windows vista computer. did you figure out how to get it to work?! we r getting very frustrated!!

RFC response times deteriorate with time

Hi
We notice that every time our system is restarted, performance is much improved for a the first few weeks. I can appreciate this from the fact that it is a huge system and things can 'clog up' after a while but we have been trying to isolate any specific cause / memory leaks etc.
One thing we have noticed is that although average dialog and background response times appear to increase gradually with time, RFC response times increase substantially. The first few days after a restart we see times of 2, 3 seconds, by the first week 7-10 seconds and by week two and beyond they are over 20 seconds.
We have 15 application servers and all the RFC traffic is load balanced using a RZ12 group that does not include the Central Instance; the same applies in SMQR & SMQS. We still do see some RFC traffic on the CI though... some of the application servers are on a different site, but we cannot see any differences in response times across sites...
Any ideas what's causing this and how we can keep these RFC response times down? The system is very busy and deals with a lot of RFC traffic, when users start complaining about poor performance we can usually see the system flooded with RFCs....
Due to size and nature of this system we can only arrange a restart every couple of months.
Thanks
Ross

Hi Markus, good question, but no, haven't noticed... not sure how I'd check either? There are hundreds (if not thousands) of different transactions ran each month, I'll try sorting the transactions by time for each day and see if there are any common longer runners that have increased, but think it'll be like looking for a needle in a haystack...

HT2497 how should i configure time capsule with time warner arris as separate networks?

i have been using the time capsule 4th generation with my home network but my connectivity seems to sometimes disconnect atleast with my macbook pro i always seem to be having to go place my cursor on the wifi logo to keep it consistent? i could jsut try and continue but really want a simple fast direction in what to do and how to configure this so that i only have access to my time capsule and network while my family may have access to the arris time warner cable network... ive heard of bridging and have had it so that my router be a bridge. whats the benefit and actual meaning of bridging in lame terms? i understand that bridging means it just runs internet through that device... so that device isnt setting any ip adresses? anywho ive messed around with the twcale internet site a bit hope i havent messed up too much. when i called time warner cable today they said they could only assist me with the arris side and not advise me with time capsule config... now i want to call apple but it seems i have to pay to call them? wow. and i bought the time capsule and best buy and was on hold for 10 minutes while being hung up rght when i seemed to be about to be helped. oh joys. anywho... help please?

We recently switched back to TWC here in the valley, att was horrible. We get 22.6 download and 2.24 uploads usually, however...we too have been having issues with the internet becoming sluggish throughout the day, not just at peak usage times. We have 2 computer plugged in directly and 3 others wireless but not on at the same time all the time.
I haven't gone into the Arris this time around, but am thinking there are settings that are screwed up. We have been using the Time Capsule's wireless connection and it is terribly slow. I'm not sure if there is a problem with the settings there or what.
Anyone, anyone, Beuler, Beuler?

Restroing from Time Capsule with multiple machines backed up

Hi,
I have a 1TB TimeCapsule that has been backing up a Powerbook G4 and a Macbook succesfully for almost a year now. My Macbook's HD recenty crashed and I am trying to restore from the TC after I had my hard drive restored.
Problem is, everytime i go through the initial setup process the Assistant only displays the Powerbook G4 backups but not the backup for my Macbook.
I can see the TC has the sparsebundle files for both machines but can't see m to get the migration process to pick up my Macbook.
Anybody seen anything like this. I though I would get a dropdown that would allow me to select the backup i want to restore from.
thanks

So this time I proceeded with the initial registration without attempting to restore from the backup. Following this, I used the Migration Assistant and the backups for both my Macs showed up nicely. Have now succesfully restored my Macbook and everything is in place just as expected.
Just one piece of advice if you go down this route is to use a different username from the one on your old Mac when setting up the new Mac. If not, during the Migration process it will ask you to rename your older account (the option to replace the duplicate account was greyed out strangely)

Can I access my iMac backup file on my Time Capsule with Time Machine from my Powerbook G4?

I've got a 1.5 Ghz PowerPc Powerbook G4. My iMac Intel was recently stolen, however I still have the Time Capsule it continually backed up to. The Powerbook is running Leopard and has the Time Machine app. Does anyone know how I can (somehow) connect with my Powerbook to the Time Capsule left behind to transfer some documents off of it to my Powerbook even though it is not the Powerbook's designated backup server (drive)? Realize that my Powerbook already can access files from the Time Capsule but not the iMac backup. What I'm interested in is going into my iMac's backup file by using Time Machine on my Powerbook to grab some files from the iMac's history. Can this be done?If so, let me know.

If you mount the sparse bundle via finder. Then you can open it in the Time Machine display.. it might be difficult between versions..
http://pondini.org/TM/17.html
Sorry to hear you iMac was stolen.. not the sort of thing that would be normally taken.

Stuck in "Looking for Backup Disk" in Time Machine with Time Capsule

I too am having a "Looking for Backup Disk" message going on forever . . . .
I have the following showing in my log (which is for a backup that started almost 6 hours ago . . .)
Starting automatic backup
Attempting to mount network destination URL: afp://Toni%20Way;AUTH=[email protected]/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Toni%20Way;AUTH=[email protected]/Data
Disk image /Volumes/Data/Toni’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
I am not getting successful backups. I first thought it was a problem with the WD hard drive I had so I invested in a Time Capsule thinking maybe it would work better with the Mac (i.e. Apple to Apple). I got a few successful backups when I got the Time Machine on June 12th but none since. I only just noticed that I wasn't having successful backups as there was no notification. I have tried a Full Reset as per these instructions with no success:
http://pondini.org/TM/A4.html
Help!

I've successfully changed the name of the Time Capsule to "Toni TC" but still no success. It is still sticking at Looking for Backup Disk.
Still have a space in the name.. No spaces. No non-alphanumeric.
Not that I think that is your problem.
From the log the actual unit is mounted and you have everything working but not actually able to copy packets across the network.
I have an ethernet cable running from my cable provider's router to the Time Capsule and then an ethernet cable running from the Time Capsule to the iMac.
This is good... also turn off wireless in the computer to force connection by ethernet only.
But when I go into Disk Utility, it isn't listed in the left hand side.
Only the sparsebundle will list and only when it is mounted.. TC is a network drive not a local drive. It will not show up in disk utility.
Let me suggest you erase the TC and start over.. sometimes it is the only way to get things going again.
A4 reset of TM. http://pondini.org/TM/Troubleshooting.html
And do a verify of the local disk.. A5.
I would also like you to test copying a single large file to the TC.. create a new directory in the TC from finder.. and copy a single large file.. 1GB sort of size and get actual speed measurement from Activity Monitor.

Trouble setting up Time Machine with Time Capsule

I have just replaced my airport wifi system with a new 1TB Time Capsule on a home system using a DSL internet connection. I have been able to configure the wifi and it is working fine but Time Machine just gives me an error message saying 'The backup disk image could not be created'.
I have returned it to factory settings and reconfigured twice but still get the same message. It hasn't backed up at all.
I have run out of ideas so any help would be appreciated.
John

Hey there,
Have you given your computer's local network a name?
To do so, head to System Preferences --> Sharing
At the top of the sharing pane should be a text box. If the box is empty, then you need to give your Mac a name. Hope this helps.
B-rock

Using Time Capsule with Time Machine AND as iTunes Library

I want to use Time Capsule as Back up solution for Time Machine and additional as storage for my iTunes Library. We have as a family 3 three Macs and want to use TC as back up solution for each Mac. That is no problem. But is it possible to use TC as external iTunes library as well. Meaning as TM back up solution AND iTunes library?
Any ideas how it works?

HarryWessling wrote:
I want to use Time Capsule as Back up solution for Time Machine and additional as storage for my iTunes Library. We have as a family 3 three Macs and want to use TC as back up solution for each Mac. That is no problem. But is it possible to use TC as external iTunes library as well. Meaning as TM back up solution AND iTunes library?
Time Machine will eventually consume all the space on its partition. This will cause problems if you're using that same partition for your iTunes library. I see two options around this problem:
1) Partition the Time Capsule volume into two volumes, one for Time Machine, the other for iTunes. I understand that this can be done, but can't give you any advice on the method.
2) Attach a USB external drive to your Time Capsule and put your iTunes library on that drive.

Recognizing Time Machine with Time Machine

Similar Messages

Maybe you are looking for