Recomendations for third party paging software

We have tried to come up with a reliable way to send pages out from Lookout 6.0 without total success.
Our application is an un-manned monitoring point. We want to do things like wait 10 or 20 minutes before paging on some alarms. Send other immediately. Send some only during certain hours. Send a second page when the alarm clears for some alarms.
I am now looking at a third party external paging software. I have seen references to both Win911 at http://www.specterinstruments.com/ and Controlsee at http://www.controlsee.com/
Does anyone have experience using Lookout with either of these? Particularly with some of the type of parameters that I have described above.
Any input would be appreciated. Thanks, Alan

Have a look at this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

Similar Messages

  • Third party download software

    Hello,
    I am looking for recommendations for third party download software.  My laptop was stolen and I would like to transfer the music from my device to my iTunes library.

    Have a look at this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • The best third party recovery software for  OS X?

    Can someone please recommend the best third party recovery software for  OS X. Accidentally emtied my trash when I shouldn't have.
    Thank you for your help.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Clients status on Software Updates "Waiting for third-party orchestrator to initiate installation"

    20 out of 25 clients are all in the "Waiting for third-party orchestrator to initiate installation".  What does this mean?  They have already passed the deadline.  They have downloaded the updates.  No installation though except on 5
    servers.  Below is a piece of the Client log.
    <![LOG[Starting install for assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF})]LOG]!><time="04:42:08.435+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1366">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_39672c9b-8955-4d0d-bb4f-201d148029ee) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_c1b1c8a2-0b8c-44ad-82bc-7edcbbdc6ce1) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_7c97c02e-1734-4d5e-aeb4-0db8a7cd7167) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_f27242f3-7eb0-4186-a31f-78b8a7c85cfc) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_99ca576e-12c2-4f99-9dff-2226d03f1ca0) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_4268ea94-52eb-4263-b238-6a2537ba9ad5) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
    file="updatesmanager.cpp:2978">
    <![LOG[Waiting for third-party orchestrator to initiate installation.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="2" thread="16048" file="updatesmanager.cpp:3162">
    <![LOG[This assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF}) will be attempted by third-party orchestrator.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1405">
    <![LOG[No pending install assignment]LOG]!><time="04:42:08.529+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="assignmentsmanager.cpp:1500">
    <![LOG[No other installations in pipeline. No reboot required.]LOG]!><time="04:42:08.545+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="updatesmanager.cpp:3583">
    <![LOG[EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 1]LOG]!><time="04:46:03.354+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21280" file="updatesmanager.cpp:1495">

    It's most likely caused by a client agent setting called "Agent extensions manage the deployment of applications and software updates", see
    http://technet.microsoft.com/en-us/library/gg682067.aspx#BKMK_ComputerAgentDeviceSettings. It has to be set to "disabled" if you are not using any third party software that plugs into ConfigMgr.
    Torsten Meringer | http://www.mssccmfaq.de

  • Third Party Printing Software recommendations for Oracle R12 AP Check printing

    We currently use Formscape for check printing in Oracle 11i. upgrade to R12 , Oracle AP checks are PDF and we are looking for alternatives for third party tools.
    Any recommendations are appreciated.

    Review this note, you will get source of check printing program
    R12: Master Troubleshooting Guide for Oracle Payables Check Printing issues (Doc ID 1353280.1)
    thanks

  • Third Party Scanner Software

    Is there such a thing as Third Party Scanner Software?
    If so, does anyone have any recomendations?

    Vuescan is the way to go and it is updated regularly (almost weekly). Its interface is quirky but thorough reading of the manual and some of the related links is worthwhile.
    It has been a great investment for me in scanning old slides on an older scanner,
    It has a rich feature set. You can multiscan and alter exposures
    eMac G4   Mac OS X (10.3.9)  

  • Third party backup software, how is the log sequence working?

    Me and a colleague had a discussion about how third party software and full backups locally on the SQL works together.
    If we use TSM that do full backups and then logbackups every hour in between for example.
    If I between the two full backups from TSM accidently do a "non copy-only" full backup do I then also break the whole log sequence backup from then and untill the next TSM backup is?
    Or can I use the full backup from my mistake and then take the log backups from TSM that occured after that fail and restore the database?
    I guess this depends on the third party backup software, but in my mind it should work but according to him it doesn't.
    Try to "paint" how I mean:
    I = full TSM backup
    - = log TSM
    F = my fail backup full but not copy only.
    I---F-------I
              ^ is where I would want to restore with both my full one and the logs from TSM. Hope you understand what I mean.

    yes, you should be able to use the full backup taken in middle and use the rest of the log backups taken afterwards to restore the database.while I do not use TSM, we use QUEST(DELL) LITESPEED, that takes full backup once a day and log backups
    every 15mins.
    if someone accidentally takes full backup in the middle of day with out 'copy only',
    log sequence will break and successive log backups depend on this full back up.
    while this should be prevented from happening in first place, you can still restore from native full backup and then apply log backups taken from third party taken after the  native Full backup.
    if this happens, I would restore the FULLBACKP with NORECOVERY using NATIVE SQL and then use  lite speed syntax to restore the log backups.Remember, native sql cannot read third party formatted backups(atleast litespeed), thats why I restore the full backup
    using native sql, since it was taken with native sql backup and log backups using litespeed syntax.
    Hope it Helps!!
    Thanks, well it was just a theory discussion we had about the issue. But none of us could find info on the internet easy to prove our point :) Thanks.

  • No MDB for third party JMS

    Just when I getting to like oc4j I ran into this.
    It is a beta document for 904 oc4j.
    Oracle9iAS Containers for J2EE
    Services Guide
    Release 2 (9.0.4)
    Part No. B10326-01
    April 2003
    Beta Draft March 21, 2003 11:59 am
    Third-Party JMS Providers
    This section discusses the following third-party JMS providers and how they
    integrate with OC4J using the resource provider interface:
    ¦WebSphere MQ
    ¦SonicMQ
    ¦SwiftMQ
    Here are the operations that the resource provider interface supports:
    ¦Look up queue and topic with
    java:comp/resource/providerName/resourceName
    ¦Send a message in EJB
    ¦Receive a message synchronously in EJB
    The context-scanning resource provider class is a generic resource provider class
    that is shipped with OCJ for use with third-party message providers.
    Note: Oracle supports only single-phase commit semantics for
    resource providers other than OJMS.
    Note: OC4J 9.0.4 does not offer MDB support for third-party JMS
    providers.
    Note: For the OC4J 9.0.4 implementation, MDBs are integrated
    with OC4J JMS and OJMS.
    Well I need MDB capability with Mqseries, so it looks like
    I am going to have to abandon ship with oc4j, and go with
    a J2EE server which supports MDB and JMS the way it was intended to, and not only work with the Vendors JMS implementation. I checked this 10.0.4 preview and it is
    the same way.
    I would be tickled if someone could tell me this is not
    the case, but I'm not expecting any answer that would
    make an MDB work with Mqseries.

    10.1.3 Developer Preview supports MQServies.
    You can download the software at http://www.oracle.com/technology/tech/java/oc4j/1013/index.html
    Look at the howto at http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-mq-jms/doc/how-to-mq-jms.html
    http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-mq-jms/how-to-mq-jms.zip
    The earlier releases support MQ Series but not in a transactional way.
    -Debu

  • CUCM mulitiple paging via ATA and third party paging system

    We have several campuses in our school district that use an ATA connected to a third party paging system.  A couple of the Schools are merging...and they wanted to know if we could in some way "link" the two paging systems so that they only have to call one extension when they page.  We are currently using CUCM v 8.6.1
    Thanks,
    Greg

    Yeah, that won't work, plenty of people had already tried that to simulate a paging system, you only get the connection to the device that answers the call.
    The only possible way I can think of, assuming they're in the same physical area, is to actually fork the cable from the ATA to the paging system.
    If not, they'll have to live with two DNs for paging.

  • Plant Determination for Third Party Material as Child Item in Sales Order

    Hi All,
    We have an issue with the Plant Determination for Third Party Material as Child Item in a Sales Order.
    Even when a Delivering Plant is maintained for the child item which is a Third Party Material, the plant of the Parent Item is only populated as the Default plant in the Sales Order
    Can someone explain the reason behiind this determination.
    P.S.- For all non -Third PartyChild Items (with non-Third Party Item Catefory & Material Type), the Plant is population correctly as per Delivering plant in Material Master.
    TIA.
    Regards,
    Sridhar

    Hi,
    Thanks everyone for the feedback.I agree with Samir Danish.It is a standard functionality of SAP which does not allow free goods for BOM material.
    However, can someone suggest work around to deal with this issue.I mean if any one has been doing any work around for this issue then please let me know.It s becoming critical for me.
    Regards,
    BM

  • PO document type for third party PO...?

    Hello friends,
    My client's requirement is that third party PO should have different document type, say ZTRD?
    I tried to configure the same with PR and PO doc types.  I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
    I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
    Please help me to configure the Z doc type for third party PO. 
    Thanks in Advance,
    Pat.

    Hi
    Please try the following, do not delete the standard settings
    1) Create Z document type for PR and assign this document type to relevant Schedule line Category  ( CS for example) in SD
    2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
    Hope it helps.
    Thanks/Karthik

  • PO Creation for third party sales

    Hi
    We have the scenario Third party sales and High sea sales which is already in use (already configured) , where PR getting generated automatically .
    But client requirement is they want the PO to generate automatically by the system the moment i save the sales order .
    Where is the setting in the SAP , where system will generate the PO automatically instead of PR
    Please suggest

    Hi,
    Go to VOV7
    Select third party item category which u r using in sales order >>> Deatils >>> under transaction flow >>> Tickmark to CREATE  PO AUTOMATIC.
    If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order.
    However u can not create PO directly.
    Kapil

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • Process demand for third party direct shipment

    Hello ,
    I need help in below given areas. in our rollout client is given statement of work like this.
    1)     Demand transfer to vendors
    2)     Reminder processing
    3)     Process demand for third party direct shipment
    Please can you explain me about these area, how it works with example. it is very benificial for us.
    Regards
    sapman

    Hi Sapera,
    There can be 3 typse of trading scenarios
    1. 3rd party with Shipping notification : Where in u create sales order  and create PO against the PR which si triggered in SAles order adn hen MIGO followed by MIRO and Billing. Here Billing to the end customer can be doen before MIRO because the billign quantity considered is based on the goods Receipt( MIGO) quantity. Many a times you might have your personnels or soem mechanisms to cross verify the delivered quanity as some times the vendor might not dispatch the quantiy in the PO. Here the MIGO doen si consumption posting/Non valuated GR as physically it doenot come into your stock and therefore is not shown in our stock. ITem category used in TAS
    2. 3rd party without shiiping notfication ; Here MIGO is not done and billig ncan be done only after MIRO as the billing quantity is based on the Invocie receipt quantity in MIRO
    3. Bought in items/ Dealer Sales : Here you bring in the materials from the vendor to our depot plant and then dispatch it to the customer . Here PR is geenrated from sales order followed by PO and MIGO. After MIGO you have to do PGI followed by Billing. MIRO doesnot have any impact on the PGI or Billing. Item category used is TAB
    But in all the three instancesthe configurational changes happen in schedule line cateogry and the account assignment which is maintiend in item category and for automatic determination of 2 different schedule line categories we need to maintian 2 different item categories alothough item category settings are almost the same.
    Hope this was helpful in giving you some insights on the trading processes
    Regards,
    Nithin

  • Account Assignment Category for third party process.

    Hi ,
              I would like to use different account assignment category for third party process. This account assignment cat must be assigned at the sales order itself. Is there any config for this.
    Kindly help me.
    Ram.

    You can create new account assignment category for 3rd party process  by copying existing std one 2 in configuration under MM - Purchasing - Account assignment - maintain account assignment category
    You can assign your own set of control for account assignment based on requirement.
    SAP use TAS item catgory in 3rd Sales order which is linked to Pur Req account assignment catgory 2.If you are defining own account assignment catgory than you need to config set-up with TAS sales order item catgory.
    Hope above details will help to move further...sanjay karkun

Maybe you are looking for