Recomended ios for 1200 series?

Any suggestions for most stable and bugfree ios to use on the AP1200 series?
For me it looks like the 12.3(8)JEA3 should be ok after reading about caveats in the release notes. Only something about shared authentication in non-native vlans and two other minor things. Our setup has 8 ssids with 4 of them with wpa-psk authentication that works ok with this version.
Its a little confusing wich version to choose with all that numbers and release dates.

Only some versions can be upgraded:
For all IOS-based 1200 series modular access point (1200/1220 Cisco IOS Software Upgrade, 1210 and 1230 AP) platforms, it depends on the radio:
–if 802.11G, MP21G and MP31G are supported
–if 802.11A, RM21A and RM22A are supported
The 1200 series access points can be upgraded with any combination of supported radios: G only, A only, or both G and A.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157130

Similar Messages

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Install Failed for HP Laserjet 1200 Series in new Laptop with Windows 8, 64 Bit

Product Name - HP Laserjet 1200 Series, PCL 6 Driver
Operating System: Windows 8 Home Edition, 64 bit
Error Message : Can't find the 1200 Series on the Network. To locate manually click ok ....
Changes Made - This is an installation on new laptop, running Windows 8, 64 bit
Description:
1. Installing to an existing network, that consistedof a desktop and two wireless laptops.
2. Both Laptops have Windows 7, 64 bit. Above named printer is successfully accessed from the laptops.
3. Am replacing one of the laptops with the Windows 8 64 bit.
4. The Series 1200 path is: Wireless Printer to Router, Router to Desktop via ethernet, Desktop to Printer via cable.
5. The wireless printer configuration is
        Name: HP Laserjet 1200 Series PCL 5
        Port: \\Central\HPLaserj
       Printer: HP Laserjet 1200 Series PCL 5
      Driver: HPMCPM25.GPD   5.8.2008
Problem
Unable to recreate this path with the Windows 8, 64 bit configuration.
a. When I attempt to download a current driver always wind up with a file entitled UPD-pcl6-x64-5.6.0.14430
     This appears to be a universal PCL 6 printer driver, Can successfully unzip the file and create a folder
b. During installation I can see the the desktop printer ICON (name:\\central\HPLaserj); so far, so good
c. Process fails to locate a driver and instructs to manually locate.
d. Browsing to the HP Universal Driver Folders fails because a driver cannot be found .
e. Attempting to manuall enter fails because you cannot input the above address (\\central\HPlaserj). Can only enter HPLaserj for the address, which obviously does not work.
f. When the installation did show a list of drivers, the only one I found was a universal PCL 6, which is what I thought I was trying to download originally.
This set up worked successfully with the Windows 7 64 bit. It appears I need help from a lot more expertise than I have to walk me through this set up.
This question was solved.
View Solution.

Problem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/

Specific OID for A radio modules on 1200 series access points

Is there a specific OID for A radio module cards of the following type:
Flap - AIR-RM21A-A-K9
Dipoles - AIR-RM22A-A-K9

No switches in Cisco's current product line provide enough power to support both radio modules in the 1200 series. The (now optional) power injector for the 1200 will provide enough inline power for both radios, if that is an acceptible option.
Cisco has plans for several switches that will be able to provide inline power to both radios, but I am not aware of ETA's on these.

IOs for cisco 1900 series router

Hi,
Kindly provide me the IOS version (cisco 1900 router) which can fix the below listed Bugs,
Cisco IOS TCP Listener Crafted Packets Remote DoS (CSCek37177)
Cisco Multiple Devices Crafted IP Option Remote Code Execution (CSCeh52410)
Cisco IOS System Timers Remote Overflow (CSCei61732)
Cisco IOS Secure Shell Server TACACS+ Multiple DoS (CSCed65778, CSCed65285)
Cisco IOS IKE XAUTH ISAKMP IPSec SA Establish Authentication Bypass(CSCeg00277)
Cisco IOS Telnet Service DoS (CSCef46191)
Cisco IOS H.323 Protocol Implementation Flaws Cisco IOS Malformed IPv4 Packet Remote DoS Cisco SSH2 Server/Client Malformed Packet Remote DoS (CSCdz60229, CSCdy87221, CSCdu75477)
Cisco IOS SSH Large Packet CPU Consumption DoS (CSCdw33027) Cisco SIP Crafted INVITE Message Handling DoS (CSCdz39284, CSCdz41124) Cisco IOS Data-link Switching (DLSw) Capabilities Exchange Remote DoS (CSCsf28840)
Cisco IOS AAA RADIUS Long Username Authentication Bypass (CSCee45312)
Cisco IOS TCLSH AAA Command Authorization Bypass (CSCeh73049)
Cisco IOS MMP Stack Group Bidding Protocol (SGBP) Crafted UDP Packet Remote DoS (CSCsb11124)
Cisco IOS IPv6 Packet Processing Arbitrary Code Execution (CSCef68324)
Cisco IOS Malformed BGP Packet Processing Remote DoS (CSCee67450)
Cisco IOS Multi Protocol Label Switching (MPLS) Packet Remote DoS (CSCeb56909)
Cisco IOS IPv6 Packet Processing Remote DoS (CSCed40933)
Cisco IOS SCCP Control Protocol Malformed Message DoS (CSCee08584)
Cisco IOS OSPF Packet Handling DoS (CSCec16481) Cisco IOS ARP Table Overwrite DoS (CSCdu81936)
Regards,
Bala

Hi,
The Current running IOS version is 12.2(4)T7. I tried through bug toolkit. but i couldn't able to consolidate the IOS to fix these bugs.
Regards,
A.Bala
leolaohoo wrote at Tue Jan 25 02:20:52 GMT+05:30 2011:
>Balakrishnan Appavu,
>
>A new message was posted in the Discussion thread "IOs for cisco 1900 series router":
>
>https://supportforums.cisco.com/message/3277195#3277195
>
>Author : leolaohoo
>Profile : https://supportforums.cisco.com/people/leolaohoo
>
>Message:

1200 Series - Tagged Management VLAN Traffic

Hi,
As per my understanding the 1200 Series Access points running IOS (12.2(15)XR) send the management traffic (RADIUS,Accouting NTP etc) un-tagged i.e. using VLAN 1.
As per our current setup, we assign this un-tagged traffic to a different VLAN (by changing native vlan to x for the Trunk Port) on the cisco switch.
Is it possible to configure the Access Point to send Management Traffic as tagged with a particular VLAN id ? (Similar to what it does for Wireless Traffic, when SSID are associated to specific VLANs)
We are trying to set this up with a 3-Com 4400 series switch i have been unable to configure the 3-Com switch, so that it can assign the untagged traffic to different VLAN instead of VLAN 1.
Regards \\ Naman

Changing the Native VLAN doesn't make a difference. I can create any VLAN and make it native but management traffic is still being sent un-tagged.
Below was the setup i tested
AP--->Trunk Link<->Switch Port(Native VLAN=15)
Switch Port --->Trunk Link<->Router with VLAN15
I can make any VLAN as native VLAN on the AP and it doesn't effect the functionality as long as the Switch Native VLAN matches to the corresponding VLAN on the router.

Cisco 1200 series upgrade failure

I have a Cisco 1200 Series (AIR-AP1231G-A-K9) access point, I have been upgrading these models to lightweight mode but are having issues with one in particular, this access point keeps "rebooting" itself, I am assuming that the upgrade faild, how can I get the access point upgraded?
Here is a capture.
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:41 by alnguyen
Image text-base: 0x00003000, data-base: 0x00359FC0
Initializing flashfs...
flashfs[1]: 4 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 1862656
flashfs[1]: Bytes available: 5878784
flashfs[1]: flashfs fsck took 2 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision B0) with 15038K/1336K bytes of memory.
Processor board ID FTX0914J0Z1
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from reload
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:13:7F:E2:34:DB
Part Number : 73-8704-08
PCA Assembly Number : 800-23211-09
PCA Revision Number : A0
PCB Serial Number : FOC09100NH1
Top Assembly Part Number : 800-23304-08
Top Assembly Serial Number : FTX0914J0Z1
Top Revision Number : A0
Product/Model Number : AIR-AP1231G-A-K9
Press RETURN to get started!
*Mar 1 00:00:04.505: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:41 by alnguyen
*Mar 1 00:00:05.442: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
ap>
ap>
*Mar 1 00:00:14.441: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:23.516: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:23.544: LWAPP_CLIENT_ERROR_DEBUG: lwapp_crypto_init_ssc_keys_and_certs no certs in the SSC Private File
*Mar 1 00:00:23.544: LWAPP_CLIENT_ERROR_DEBUG:
*Mar 1 00:00:23.544: lwapp_crypto_init: PKI_StartSession failed
*Mar 1 00:00:23.698: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:23.698: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 4 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1862656
flashfs[0]: Bytes available: 5878784
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from flash parameter block...done.
Base ethernet MAC Address: 00:13:7f:e2:34:db
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1200-rcvk9w8-mx/c1200-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1200-rcvk9w8-mx/c1200-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend

I might have an answer for you... or I might be COMPLETELY WRONG
If it isn't just a "failed" upgrade, as in you've tried the upgrade again and it still is happening.... I was reading something about older APs not have a Manufacturing-installed certificate (MIC) and these AP's generating a Self-signed Certificate (SSC).
The error you have is referring to SSC so I'm writing this as if you have not had to previously do this step for your other conversions.
I believe a couple of things needs to happen for SSC AP's.
1) Must enable controller to accept self-signed certificated.
Security > AAA > AP Polices > Accept Self Signed Certificate > Apply
2) Add AP to Authorization List in Security > AAA > AP Polices > Add AP To Authrorization List
Enter MAC Address of the AP
Certificate type = SSC
SHA1 Key Hash can be obtained from the controller by issueing this command:
"debug pm pki enable"
Look for the line: sshpmGetIssuerHandles: SSC Key Hash is XXXXXXXXXXXXXXXXXXXXXXXXXX
I believe you use the XXXXXXXXXXXXXXXXXXXXX as the SHA1 Key Hash.
3) If required, you may also need to add the AP MAC Address in the Mac-Filter: Security > AAA > MAC Filtering > New >
Hopefully its either a reload of the software or this SSC thing that fixes the problem....

Using CLI to enter Mac local list on 1200 Series

I have a number of 1200 series Ap's that are set up for MAC Authentication based on a local list only. From the GUI these addresses are entered from the Advanced Security Screen.
I wnt to find a method for entering them from the CLI but am running into a problem with the level 7 passwords that seem to be automaticly applied when the MAC addresses are added from the GUI.
If I enter MAC 0011.22aa.33ff from the GUI and then look at the config from the CLI it looks like this:
username xxx password xxxx
username xxxx autocommand exit
how do I do this from the CLI?

Hi,
I think if you need to enter lots of MAC Addresses into AP, the fastest way is to use CLI.
Refer to the following doc on how to configure MAC from CLI. Look under "Local Authenticator Access Point - Step 11"
http://www.cisco.com/en/US/partner/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080341e72.html#wp1039558
If authentication is purely done via MAC, then you can do like the following example:
AP#config t
AP(config-radsrv)# user xxx password xxx group clerks mac-auth-only
Probably you need to use notepad to list all MAC (as username & password), then copy &paste to your AP's CLI.
Hope this helps.
Rgds,
AK

HP laserjet 1200 series not responding

I just got an hp laserjet 1200 series printer from a friend that used it on his pc. I can't seem to get my computer to recognize it. I have tried going to the hp page and downloading the driver and the software, which I thought I did, but when I open printer setup utility and look for new drivers, nothing appears. Any ideas?

Is your printer connected through a hub or directly to the computer?

HP LaserJet 1200 Series- Spaces appearing in words of printed document

I have an HP LaserJet 1200 series printer. All of a sudden blank spaces began appearing in the footnotes of a document. For example, "supra" printed as "s upra" numerous times in a row, "in" printed as "i n", and "whether" printed as "whether r". The spaces do not appear on the computer screen. I just attached another printer and the spaces disappeared. Is there a way to fix my HP LaserJet 1200 series printer? Thanks for any help!

Hello eaw,
The HP LaserJet 1200 is a commercial printer. For a better chance at finding a solution, I would suggest posting in the forum for HP Business Support.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Also, here is the support page for your printer:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP LaserJet 1200 series BW USB problem

I am unable to re install my HP BW LaserJet 1200 series printer. My system is WIN XP PRO, SP3.
The printer was working fine, then something happened and the printer is not listed in Device manager. The printer self check works OK,, but when I plug in the USB cable, there is no screen respons that a new USB device has been found.
Note , I have 2 flash drives attached to the USB ports that work OK.
I tried to re install the 1200 series driver, but the printer is not listed in Device manager.
Any suggestions troubleshooting tips would be appreciated.
Thanks,

I've often had this problem when I start a print but the 1200 is not connected, or for other reasons. I either:
1. Turn the HP 1200 off then on; or
2. Go to Print centre and delete the job.
One of these always fixes the problem.

Lexmark 1200 Series All in 1 Will not work on my MAC

I recently purchased a Lexmark 1200 series all in one an it will not work. Plug n play doesn't happen so i went through system pref, clicked printer and add printer. It seen it plugged in via usb so i clicked it then it said select drive. The driver for this model isn't there. I did a software update, didn't work so I searched online and cant find anything and neither did the official lexmark site.
Don't know what model mac I have. All I know is its a new mac book so ignore what my OS is.
Thanks

Hi mrburgess187!
Welcome to Apple Discussions.
I went to Lexmark's website and under OS compatibility I didn't see your printer listed for OS X compatibility.
http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596666691854_1177082303en,00.html

I can't get my HP psc 1200 series to scan with my Mac

I've installed, uninstalled, and installed HP psc 1200 series software but I cannot use any of the scan features of the printer. I have been to HP and downloaded drivers and still no luck. Any suggestions?

maybe this link will help http://www.makeuseof.com/answers/play-media-files-mac-formatted-external-hard-dr ive-hdtv/ unfortunately its for file up to 4 GB size, otherwise try to connect your mac directly to your Tv or I suggest contacting SAMSUNG about this issue, maybe the have assigned softwares for this formatting issues like in western digital for example.

Which ios for catalyst 4500 support wccp?

hi everybody
could you pls tell me, which ios I can use for 4500 series that could be support WCCP?
thanks

Hi
As per the datasheet WCCP is not supported in 12.2(25)SG which is the latest available code for 4500.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp363642
But you can make use of AGM module which does supports as mentioned in product datasheet relased ..
http://www.cisco.com/en/US/products/hw/modules/ps2957/ps5288/index.html
regds

Selecting appropriate Router & IOS for Gatekeeper

Hi All,
I managing the Video conference setup but I am struggling to find a appropriate IOS for Gatekeeper
I need some suggestion for selecting router series (Is 2620XM is ok?) and also the appropriate IOS?
Gateway is Tandberg
Planning for 8 video conference (8x256)

This URL should help you:
http://www.cisco.com/en/US/products/hw/routers/ps259/index.html
http://www.cisco.com/en/US/products/sw/voicesw/index.html

Recomended ios for 1200 series?

Similar Messages

Maybe you are looking for