Recomended RF Devices for WebSAPConsole (telnet and http modes)

I'm about to start implementing RF transactions for a client.
We're using WebSAPConsole with SAPGui 6.4 and SAP ECC 6.0 based on NW2004S.
I'm looking for a list of make, model and specifications for RF devices that haven been proven to work well with SAPConsole using TelNet server (character mode) or MS IIS server (Gui interface).
I know that Symbol , Inetrmec and TekLogix have such RF devices.
But, I want to learn from your experience based on what you have actually used during implementation.
Could someone provide me this info?

Hi, we've been using the character based Intermec Antares T2425 handheld units for the passed 5 years or so. They work quite well, and hold up to a lot of abuse.
Regards,
Rich Heilman

Similar Messages

Is there a mobile device for just text and games for a child?

is there a mobile device for just text and games for a child?

iPod touch? That's the only "iPod" that can play games (run apps). It connects to the Internet over WiFi (not mobile carrier). It's basically an iPhone without the phone parts. If you get a used one, earlier models cannot run all the software available to the latest model (include the latest version of iOS). That may be perfectly OK for a child, but you should look into and understand the imitations of older models, before getting one used or refurbished. Apple-certified refurb iPod touch is available here
http://store.apple.com/us/browse/home/specialdeals/ipod
(The current version of iPod touch is 5th gen.)

VI for FireSpy400 debugging device for IEEE1394 hardware and software

Does anyone know were to find a VI for a FireSpy400 instrument used as a debugging device for IEEE1394 hardware and software?
This company make this instrument http://dapdesign.com/

Hi tomieee:
I've searched the internet for a FireSpy400 LabVIEW driver and unfortunately could not find anything. It indicated in the link you gave that this connects to your PC via USB. If this is the case you could write your own VIs using VISA to communicate with the device. This will not be a simple task but since no drivers exist, this may be your only option.
USB Overview
Regards,
Emilie S.

AP1242AG: Telnet and http accesses:

Hi,
I can not telnet the AP1242 and I can not use its web GUI. I do not find the commands to enable Telnet and HTTP (such as "config network telnet / webmode" of the WLC2006). Does anybody provide them.
AP1242 releases are:
* Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(11)JA1, RELEASE)
* BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE )
* LWAPP image version 4.0.206.0
Thanks by advance. Best Regards,
Alain-Claude

Hi, i belive there is a mistake, since the LWAPP only should work with a wireless lan controller.
http://www.cisco.com/en/US/products/ps6521/products_data_sheet0900aecd8031c968.html
When the LWAPP turns on it locates the WLC by an arp request, and the controller set's up all the configuration on the AP. You can not configure a LWAPP true TELNET or HTTP.
If you only need an AP you should practice a downgrade on your AP to make it work as an autonomous AP.
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
Check it Here.......
Hope it helps!!!!

Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost always have to:
Bluetooth > Set up Bluetooth Device
Turn off the keyboard (hold down the power button for several seconds)
Turn the keyboard back on (hold down power button for several seconds)
Go through the setup wizard
Repeat for the trackpad
Things that don't work:
Pressing the button on each Bluetooth device
Restarting each Bluetooth device
Turning Bluetooth on and off
Setting the Bluetooth devices as "Favorites"
Selecting the device from the Bluetooth menu item and clicking "Connect"
Rebooting my MacBook Air
Resetting the NVRAM / PRAM
Once the device is connected for the day, I do appear to be able to "Disconnect" and then "Connect" again from the Bluetooth menu item. The devices will also automatically reconnect by pressing a button on them. It just appears to lose the "lease" on them or whatever after a little less than a day.
I'm trying to think of other troubleshooting steps I could take and it just occurred to me that I could try swapping them with the peripherals I use at work (which are possibly newer models, but otherwise identical). Any other suggestions?

Huzzah! Less than 1 week after finally getting fed up and posting this question, I have discovered the root cause - my wife had been inadvertently stealing my keyboard and mouse connection whenever she turned on her laptop! She's using my hand-me-down MacBook Pro which I thought I had reset, but apparently it remembered its Bluetooth connections.
I had suspected something similar since I occasionally used the wireless keyboard with my iPad, but had already ruled that out.
I can't believe I figured this out after 6 months of mild frustration, but just days after posting this question

Only HTTPS requests are working for SOAP Sender and HTTP not working

wHi Experts,
We have enabled our HTTPS port ( SSL ) in NWA -- >> Security -- >> SSL and Key stores. So understanding is HTTPS port is now enabled on top of HTTP. So PI should be able to cater requests at both ports.
Now, we have developed a synchronous SOAP to RFC scenario and downloaded WSDL file. This file has both links -
a. http:<host>:<port>
b. https:<host>:<port>
We intend to make a PI system where both ports can work. Now questions.
1. When we test web service exposed from PI using SOAPUI tool, only HTTPS works fine and gets the response back. If we try HTTP URL, an error is encountered - HTTTPS scheme is required.
2. Is this whole understanding that both ports ( HTTP, HTTPS ) should be able to operate simultaneously correct ? Or this is not at all possible ?
3. In SOAP Sender, we tried selecting all 3 options - 1. HTTP 2. HTTPS without client authentication 3. HTTPS with client authentication.
None of the options have any effect on testing, Each time, only HTTPS request works and HTTP doesn't.
Can anyone please provide some hints for troubleshooting ?
Thanks..
regards,
Rajagopal.

The error "HTTPS scheme is required" is normally returned when the HTTP Security Level on the SOAP adapter is not set to "HTTP". I can see you have mentioned you have tried all these, maybe a cache refresh has gone wrong? Could try recreating the channel with just HTTP specified as security level and this should allow HTTP or HTTPS
I assume you are using a different port number for your HTTP and HTTPS requests from SOAP UI. Normally the HTTPS port is the same as the HTTP port number but the final zero changed to a 1 i.e. https://<host>:50001 instead of http://<host>:50000.
You should be able to confirm both HTTP and HTTPS work OK by loading some of the system webpages in a browser over HTTP and over HTTPS i.e. http://<host>:<port>/nwa and https://<host>:<port>/nwa
Chris

Remove option for Data Tracking and Drill Mode

Hi all
We have integrated a bunch of Webi reports into the SAP Portal. My question is now how to remove the options about Data Tracking and Drill Mode in the top right hand corner? I guess it is some special right we need to deny in the Access Level, we have defined. But if I deny data tracking and drilling in the Web Intelligence section of the Access Level, it has no effect.
Please assist.
Best regards,
Martin Søgaard

I, too, am perplexed by this change. Then again, I've been perplexed by most of the changes Apple has made to products/os in the last few years. I'm thinking that I may not only change browsers, but hardware/software also. It's issues like this that make me wonder if anyone on the Apple design team actually uses any of their products, or maybe they think we are all just too ignorant to be able to use a computer.
Making things simple to use shouldn't equate to removing advanced functionality, but it seems that's what Apple believes it to be.
Really disgusted now.
Thanks Apple.

Need common interface across devices for word processing and spreadsheets with shared files

Need software for Mac, PC, iPad & iPhone with common word processing interface across devices (spreadsheet as well).
Need shared access to files through home NAS or cloud.
Trying MS Office 365, Google Docs & Sheets, OpenOffice,
Trying iCloud, Google Drive, OneDrive, DropBox, WD MyCloud.
So far each has fatal flaw.
Suggestions?

Office, Office for Mac and the Office Apps for iOS can all read from and write to OneDrive. You can create folder structures however you want them, and read files from them normally though the Apps.
You do need an Office 365 subscription for certain editing features on the iPhone Office Apps though.
As to a backup, from either the PC or the Macbook, you should be able to simply drag and drop your files to the external drive form the OneDrive folder.
https://itunes.apple.com/us/app/onedrive/id823766827?mt=12
You can access your documents from anywhere, as long as you have an internet connection. Updates are applied almost immediately.
Why did One Drive not work?

OCFS2 , ASM and Raw Device for Voting Disk and OCR

Dear all ,
My manager assigned me to establish a 11gRAC , 3 node on OEL. He likes to locate ASM with datafiles , at the same time, 2 OCR vol on OCFS2 and RawDevice respectively , 2 voting disks on OCFS2 and RawDevice respectively also.
This really annoys me .
Oh all experts, could anybody give me some advices ? Can those stuff be co-existed ?

Billy Verreynne wrote:
MccLok wrote:
My manager assigned me to establish a 11gRAC , 3 node on OEL. He likes to locate ASM with datafiles , at the same time, 2 OCR vol on OCFS2 and RawDevice respectively , 2 voting disks on OCFS2 and RawDevice respectively also. Not a great idea to introduce additional s/w layers between the CRS software and its OCR and voting disks. If ocfs2 is for example used as a shared file system for these devices (files), then the ocfs2 cluster s/w needs to be up and running, the shared devices mounted, before CRS can successfully start. Thus any problem with the ocfs2 stack, will impact on CRS. Why? What does ocfs2 buy you in this regard? What are the benefits that justifies the increased complexity and the dependency of CRS on another s/w layer?
Fewer moving parts means less complexity, less stuff that needs to be configured and can go wrong.In fact, some users had perception that " Pay mroe so that Get more".

I have an ipod and an iphone. I would like to use both devices for my work and home computer. But it tells me that its installed to another library and will delete all items to sync to itunes. Is there a way to do this without deleting?

OK....... I have an Ipod and an Iphone. Would like all the Movies and music i have on both. My computer broke and now the only music i have is on ipod. It wont let me transfer to itunes. It says this device is linked to a different library and if i want to sync to a new one and delete everything on it. UH....NO Is there a way to do this without deleting ? All purchases were made though the same apple id.

- An iPod can only sync with one iTunes library. Yu can however manage music and videos among different computers by:
Using iPhone, iPad, or iPod with multiple computers
- To change syncing computer, move all the media to compute r#2
- Connect the iPod to #2 and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note tha the iPod backup the iTunes makes does not include synced media like apps and music.

I need a video capture device for downloading Band and family video tapes.

Hi, I need to download some old video tapes before they turn to dust. Are there any fairly inexpensive video capture devices that work well with the Imac?
Thanks

Are they VHS video cassettes or something like 8MM camcorder tapes?
If they're camcorder tapes, usually it's best to try to buy an old video camera (MUST have FIREWIRE port).
Then you can play the tape in the camera and capture from the Firewire. Also important, if you have a 2010 (maybe 2009?) or newer iMac, you'll need a cable that is Firewire 400 to fit the camera at one end and Firewire 800 at the other end to connect to the iMac.

How to set up SIP Proxy for comprehensive CVP and ICM mode

Hello folks,
My name is Eric and I'm facing some issues configuring a environment using the components below:
- CM 8.6
- ICM 8.5
- CVP 8.5
- SIP Proxy 8.5
- VXML GW
First of all, I always implement comprehensive mode environment at my customers (using CM, ICM, CVP, GW), but this is the first time that I'm using SIP Proxy, so the workflow change a lot. I've configure everything fine following Cisco's guides, my VRU PG's are ACTIVE, all the CVP services are UP, and the communications between the components are ok. Now I will explain below the workflow of the call:
1 - When I call to a Route Pattern 9001, for exemple, this RP use a SIP trunk that sends the call to SIP Proxy;
2 - At SIP Proxy Server I've configure a 9001 number in Route Table to send this dn to CVP Call Server;
3 - The CVP route request ICM that picks this 9001 DN and run a script. After this, ICM returns the variables needed (media_server, media_lib, application name) and label to CVP using Send to VRU component;
4 - CVP Call Server send this informations to SIP Proxy;
5 - SIP Proxy sends it to VXML Gateway and I can see this calls reaching the VXML GW;
6 - At VXML GW I've configured the dial-peer to reach my label (1234567890) and to calls the bootstrap service;
The big problem is that the calls becomes mute after being answered, I think the communication between CVP -> SIP Proxy -> VXML GW are missing some steps because if I configure my CVP to work with ICM only (excluding the SIP Proxy Server) the calls works fine following the Local Static Route and goes to available agent or queue.
If I'm using SIP Proxy Server, it's necessary to use Local Static Route or not at CVP? I think not because SIP Proxy will use the Route table to send the informations to the components. Another doubt is about ICM, for ICM is clear because the configuration is the same for use SIP Proxy or not, isn't?
Thank you very much.

Amir,
I'm not using Ingress Gateway, I'm passing from CM Route Pattern to SIP Proxy, using SIP trunk.
Saeed,
- is your media file or the agent call, which one is silent or both.
The media file is not prompted, so the calls becomes mute.
- have you configured the routes for VXML VG in route table.
Yes.
- have you configured the rotues for UCM for agent's extension in route table.
Yes
When I call, I can see it reaching the VXML gateway, but doesn't prompt the audio and neither send the call to agent. The agent becomes reserved but the call are not delivered.

I had started the process of removing my husband as the primary on my ipad2 device before the Holiday and never got back to it. I keep getting a message on the ipad for New icloud Terms and Conditions but I can't seem to log on. when i go to it's locke

I had contacted apple support before the Holiday and we had started the process of removing/replacing my husband as the primary on my ipad2. However, I keep getting messages now 'New iCloud Terms and Conditions' in a window that constantly pops up. When I go to settings to log into icloud, it is locked with a grey screen. What can I do? Also, I had gone throught he process of syncing all 3 of my devices Ipad2, mini and my iphone5 to have the same passwords, etc. for ease of use. Now that seems to be all wrong as well. HELP! I need these devices for my work and I'm short on time to go to the store, but will if I have to.
Thank you!
Julie

If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.

SSL Installation for AS2 and HTTPS

Hi b2bgurus,
Please let me know the steps to install SSL for various trading partners.
Does the B2B server need a bounce after every certificate install/change.
I would like to install the certificates for AS2[EDI] and HTTPS protocals.

Does the B2B server need a bounce after every certificate install/change.B2B supports SSL via Weblogic SSL implementation and hence if you are making any change with respect to identity certificate then you may need a server bounce. If you are just adding/removing a trust certificate (partner's certificate) then no bounce is required.
I would like to install the certificates for AS2[EDI] and HTTPS protocals.Please refer below posts -
http://anuj-dwivedi.blogspot.in/2010/10/enabling-ssl-on-oracle-b2b-11g.html
http://anuj-dwivedi.blogspot.in/2011/04/implementing-message-security-in-oracle.html
Regards,
Anuj

Iphone 6 been restoring from icloud backup for 9 days and still not finished?

I got my iPhone 6 on the 19th when it came out. It's an ATT 128 gb model. I started restoring from icloud backup on that Friday (9 days ago). It still is saying it's restoring from backup. Daily it's asking me to delete the data or keep downloading. This phone is for my business, so the info is very important. I am also worried that all the things in the last week have yet to be backed up since then, because I can't back it up till the restore is complete. I also can't do the new software update 8.0.2. I am on a fast WIFI nearly 18+ hours a day and I can surf the net just fine, but why is my restore from 9 days ago still not finished?

Apple:
This needs to get improved. I had the exact same issue migrating my 5 and wife's 5S previously. It's never worked well. We need status bars, and indications of what has been copied, what remains to be copied, and ways to resume it and pause it without hoping it works and getting messages in the morning asking if you want to resume it, making you wonder if anything actually occurred overnight. The message doesn't pop up within 10 minutes of connecting to power and wi-fi so I have no idea how long it actually takes to come up.
It's unacceptable to think any device owner wants to roll the dice and hope they have all their data. We use these devices for our jobs and that data is critical for some of us. It's not all just pictures of the dog! Even though those are critical, too!! It would be different if this wasn't a known issue and the resolution wasn't so easy...get this fixed!!!

Recomended RF Devices for WebSAPConsole (telnet and http modes)

Similar Messages

Maybe you are looking for