Recommend compatible PSU and graphics card for P35D3?

Recommend compatible PSU and graphics card for P35D3?
This weekend I’ll be taking my rig to a PC repair shop and ask them to swap out my PSU and my graphics card.
Because I’ve RMA’d all the components (see signature) several members of different forums, and the tech support of the various components, seem to think that my boot problem is because of a compatibility issue with either my Ultra X3 600W PSU or my XFX 8600 GT and my P35D3.
I need to be ready to make decision, without having time to research, if the repair tech recommends a replacement.
Here’s my considerations:
I selected the Ultra because it's both modular and 85% efficient (it also has the required 8-pin cable to power the P35D3's CPU and it has SATA power cables.
I selected the XFX 8600 GT card because it is dual-link (2 DVI outs -- Dell 30” & Viewsonic 19”) and it has no fan, and is DX10 ready. I’m not attached to the idea of no fan. I’m a speed freak but not a gamer or an over clocker--I like the option of trying out games.
Both the Ultra and the XFX are somewhat medium priced.
If the repair tech discovers that other PSUs or graphic cards work then I might be able to get Ultra or XFX to accept a return. Neither company accepted my offer to pay extra to exchange mine for another better model.
Suggestions please.
Thank you,
Kerry

Thanks Boss,
Quote
Look here for good PSU suggestions:
https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246
About VGA any should work, you can see MSI Test Report for your board here:
http://global.msi.com.tw/index.php?func=prodtestreport&prod_no=1230&maincat_no=1&cat2_no=&cat3_no=#menu
lots of good info.
Wish me luck today (Thu), that the tech finds out my XFX or Ultra is not compatible.
Kerry

Similar Messages

  • Where can I get a new replacemen​t motherboar​d and graphics card for HP Tx2 touchsmart 1340ea? Cost?

    my computer has been getting either blue screen of death, or your machine has been turned off to save your computer or pixels jumping around across screen, so on white screen was getting streaks of blue from top to bottom and on black streaks of red dancing about, OR no screen at all - blank. 
    Now machine won't even boot up.  This all happened both on cable and wireless.   Product no VJ667EA #    TX2 Touchsmart 1340ea.
    There have been no upgrades of hardware , and on software front only thing is regular updates of windows.  It was running Windows 7 64 bit professional.
    It is now totally dead.  If you try to boot up you get the electric symbol light up, and caps lock and end /number lock light up and flash... thats it.
    We just tried to blow out dust that is all.  I have a nasty feeling HP doesn't want to sell any parts and only bothered about selling folks like me  a new machine which I am not going to buy.    This one didn't last more than 18 months, just long enough to be out of guarantee.  Here's hoping I am wrong and there are replacement motherboards and graphics cards (it

    You're very welcome.
    What seems to be unfair is I can buy that motherboard directly from HP in the USA as you saw, but for whatever reason you can't buy it directly from HP in the UK.
    I still think you would be better off checking out what related notebooks may be for sale out there on eBay UK.
    I buy all my PC's on eBay in used condition for great bargains. I do limit myself to the business PC's and notebooks that HP makes, however.
    Best of luck in whatever you decide to do.
    Regards,
    Paul

  • New power supply and graphic card for Compaq CQ3232L

    Hi all,
    I am using Compaq CQ3232L and would like to upgrade the graphic card with one of the HD 5770, Sapphire HD 5770 Vapor-X 1Gb 128Bit DDR5 to be exact.
    My current power supply (Bestec Model ATX01...) specs are:
    +12V/11A, peak 13A
    +5V/10A, +3.3V/10A,
    -12V/0.3A, 180W according the manual.
    I've been looking a replacement for the power supply but not sure which one will fit the case? And how much power will be need to run the Sapphire card and future upgrade (Blu-Ray drive and another HDD)?
    Regards,
    Eko

    WSH, besides measuring the PSU, you should assure that there is sufficient space for the video card.  Open the case.  Measure from the edge of the case to the opposite side of the motherboard where the PCIE slot is located.  This is the approximate length of the card that will fit.
    Also, I like OCZ and Corsair PSU's.  They are both enthusiast/gamer manufacturers.  Their products will provide clean, stable power for your system.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Maximum boosts to RAM and graphics card for iMac G5 PowerMac 8.1?

    Hi.
    Just bought this still excellent machine secondhand with a 3 month rtb warranty.
    It currently has these specs, and I'd like to know what level I can take them to at maximum for Graphics Card, RAM and maybe hard drive.
    Machine Name: iMac G5
    Machine Model: PowerMac8,1
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 1
    CPU Speed: 1.6 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 1 GB
    Bus Speed: 533 MHz
    Boot ROM Version: 5.2.2f2
    Graphics
    Chipset Model: GeForce FX 5200
    Type: Display
    Bus: AGP
    Slot: AGP
    VRAM (Total): 64 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0329
    Revision ID: 0x00b1
    ROM Revision: 2103
    Displays:
    iMac:
    Display Type: LCD
    Resolution: 1440 x 900
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    2 slots x 512MB
    DIMM0/J4000:
    Size: 512 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J4001:
    Size: 512 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    Hard Drive 74.41 GB
    Thanks and happy Ostara!
    blessed be
    twopaw

    Hello Niel
    Thanks. I didn't realize that I can get up to a TB! Wow! What type of TB do I buy, any suggestions of specific ones? Is there G5 specific Tb disks to install? Or just any as long as they have the right measurement size? And what size do I need to remain within?
    blessed be
    Samantha

  • Maya 7 and graphics card for dual 2.3 ?

    Hello,
    can anyone give me advise which graphics card and how much RAM I should get for the latest 2.3 G5? The applications I am going to use are:
    Adobe After FX, Photoshop and Illustrator CS, Logic, Pro Tools, Flash MX2004, and Maya 7 Unlimited (with student reduction) and some other software, which should not be too disturbing.
    I found this information about Maya, and am uncertain now which graphics cards could cause problems.
    "Maya 7.0 IS NOT qualified on systems using an Nvidia GF4Ti graphics cards and higher. A problem exists where the Trax editor and Dopesheet editor do not draw properly and can lead to a kernel panic. DO NOT upgrade to 10.4.3 at this time if you have an Nvidia GF4Ti graphics card or higher. We are working with Apple to get this issue resolved as soon as possible."
    For the rendering with Maya, I would like to aim for a high end graphics card, but would it work on my system? I am also uncertain, if Maya's student version is programmed for dual core processors, I know that the PLE version is not. It would be great, if someone who is using Maya 7 could tell me about their experience.
    Thanks
    Sprite on Stage

    The best place to ask is on the Maya forums.
    Maya is always having a problem with new hardware and Mac OS X updates, sometimes it's their fault and sometimes it's Apple's, so it's advised to not to update until they get their bugs worked out and you get the all clear sign from fellow more advanced Maya users.
    Cloning your boot drive is a excellent way to "go back" in case a OS update breaks Maya.
    I think the best hardware machine is a Quad, not a dual core. Dual cores are going to become standard across all computer lines here next year, from laptops to ordinary desktops just like single processors are now.
    So for $800 more you get twice the amount of processors, triple the hardware life expectancy and you can continue to grow with Maya updates as they tax all four cores eventually. A Quad is cheaper per year than present dual cores so you'll save money not having to upgrade next year or so.
    When you get your machine, I'm almost sure 10.4.3 will not be pre-installed, if it is you can wipe it and install 10.4 from Tiger disk and upgrade to 10.4.2 from Apple downloads page.
    Get some RAM, Tiger overrides Photoshop CS2's RAM limit and gives great performance. The rest of Adobe apps need some work still to optimize for the hardware.
    Read more info here, text doc

  • Where can I get a new replacement motherboard and graphics card for HP Tx2 touchsmart 1340ea? Cost?

    my computer has been getting either blue screen of death, or your machine has been turned off to save your computer or pixels jumping around across screen, so on white screen was getting streaks of blue from top to bottom and on black streaks of red dancing about, OR no screen at all - blank. 
    Now machine won't even boot up.  This all happened both on cable and wireless.   Product no VJ667EA #    TX2 Touchsmart 1340ea.
    There have been no upgrades of hardware , and on software front only thing is regular updates of windows.  It was running Windows 7 64 bit professional.
    It is now totally dead.  If you try to boot up you get the electric symbol light up, and caps lock and end /number lock light up and flash... thats it.
    We just tried to blow out dust that is all.

    Hi,
    This i one source:
      http://www.ebay.com/sch/i.html?_nkw=hp+touchsmart+tx2+motherboard
    Please also read this:
      http://answers.yahoo.com/question/index?qid=20100128052514AAuoHyx
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Processor and Graphics query for G4 PowerMac 'Digital Audio'

    Hey all, two questions here...
    Question 1
    Ive got ANOTHER new processor and graphics card for my Digital Audio G4. The processor i had in it before was a Sonnet Encore ST/G4 1GHz, ive replaced this with the same make of processor but at 1.4GHz. The processor works fine and the machine runs fine, but it isn't listed properly in the system profilers...
    In OS9 it's speed is described as "about 656Mhz" and in OSX its described as 0MHz!
    Im not too worried since everything seems to be working fine, but i want to be sure that its not going to suddenly blow up on me, and if anyone else has had things like this happen with these processors or configurations. Ive still got the 1GHz should anything go wrong, but newer, more powerful stuff is always good!
    Question 2
    The new graphics card i put in is a ATI Radeon 9600 Pro PC & Mac Edition. Ive read a few things on the internet about it sometimes not working with DA Power Macs but thought id chance it anyway, i can always sell it on if it didn't work...
    Well the card works in both OS9 and OSX and displays everything fine, its recognised by both systems and everything. The only problem is i can't change the display settings, on both systems the only display option ive got is x736 (or whatever it is thats closest to it), there are no other options available, i can't choose anything else in the Recommended menu, not can i change from Thousands to Millions of colours.
    Of course its generally agreed that these cards work better on G5s than G4s, despite it saying on the box that it supports G4s. Ive also downloaded the ATI Displays Control Panel to see if i can control it that way, but to no avail. Does anyone have any info or words of advice on this?
    Cheers all!

    Good to hear, thanks!
    Do follow the advice to add as much cooling as you can, & use the best Ceramique Thermal Paste you can find.
    Did you clear all the Caches yet?
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    Look for the 10.3 version of AppleJack 1.4.3.1 (326 KB) (For Mac Jaguar and Panther), here...
    http://mac.oldapps.com/applejack.php

  • Graphics card for G5 Quad

    Can anyone recommend a suitable second graphics card for a G5 Quad? More and more I work now with importing TV programmes and films into QT,but still need to use my VHS from time to time.My plan is to ditch my CRT monitor and move over to an LCD.That's fine for viewing a digital source from within the Mac,but how can I also hook up the VHS sop that I can use that with the LCD also?
    Thanks for any advice

    I wouldn't add a second graphics card, too much demand on the PCI bus, and may cause problems with audio artifacts, we had that problem, plus horrible speed penalties. (We were using a MOTU 24i/o as well). My recommendation would be to use the firewire output to video (using a firewire device like the Canopus ADV-110) OR a card with dual display (Does yours support dual display? the ATI does) and put a scan converter on the second output. i hope that will do what you need.

  • Want to add Video and Graphic Card to my computer system

    I Notice that one of the users' in the Apple discussion Board is Listed, (AndyO) he has help me many times in the Past and was succesful in my problrm solution, would he might be able to help me with this?
    I had Purchased the Game Spore Creature Creator the Starter Kit which is just the Creature creator game and not the actual game itself. I wasn't able to install the the game on my computer because I don't have the right or not at all Video and Graphic Card install on my computer. I had Contacted the Company "EA" that puts out the Game Spore, this is what they said what the game requirements are: The minimum system requirements for Spore and Spore the Galactic Edition for Mac are as follows:
    * Mac OS X 10.5.3 Leopard or higher
    * Intel Core Duo Processor
    * 1024 MB RAM
    * At least 345 MB of hard drive space for installation, plus additional space for created creatures. (260 MB for the Trial Edition)
    * Video Card - ATI X1600 or NVidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100
    This game will not run on PowerPC (G3/G4/G5) based Mac systems (PowerMac).
    For computers using built-in graphics chipsets, the game requires at least: an Intel Integrated Chipset GMA X3100 or Dual 2.0GHz CPUs, or 1.7GHz Core 2 Duo, or equivalent
    Supported Video Cards
    ATI Radeon(TM) series
    * X1600, X1900, HD 2400, HD 2600
    NVIDIA GeForce series
    * 7300, 7600, 8600, 8800
    Intel(R) Extreme Graphics
    * GMA X3100
    and that I need to upgrade my system. Basically I need; ATI Radeon 1600 or NVIDIA Geforce 7300 and a INTEL Extreme Graphic Video Card-GMA X3100, in order to be able to install and play this game. Since I already have this game, I would like to be able to upgrade my computer system which brings me to ask; does somone know or refer me to a web site that has and sells these Video and Graphic Card and supports for the Mini Mac?
    Plus they say that I need a 1020 of MB of Ram, I Have already found that 1024 MB of Ram but I just need those Video and Graphic Cards for my computer system. I am adding my computer system Profile to my discussion board to show you what I have on my system, would you be able to tell me if I would be able to add these Video and Graphic card and the memory or Ram 1024 to my computer system?
    Note: Here is a web site that I am looking at to add the 1024 MB of Ram to my computer system:
    http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=24188 41&CatId=2453
    what do you think?
    Here is part a copy info of my computer system Profile:
    Trisha Foster’s Mac mini
    10/10/08 5:39 PM
    Hardware:
    Hardware Overview:
    Model Name: Mac mini
    Model Identifier: Macmini2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MM21.009A.B00
    SMC Version: 1.19f2
    Serial Number: YM8073Q**
    Network:
    AirPort:
    Type: AirPort
    Hardware: AirPort
    BSD Device Name: en1
    IPv4 Addresses: 169.254.247.182
    IPv4:
    Addresses: 169.254.247.182
    Configuration Method: DHCP
    Interface Name: en1
    Subnet Masks: 255.255.0.0
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:1f:5b:3e:ce:93
    Media Options:
    Media Subtype: Auto Select
    Bluetooth:
    Type: PPP (PPPSerial)
    Hardware: Modem
    BSD Device Name: Bluetooth-Modem
    IPv4:
    Configuration Method: PPP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    FTP Passive Mode: Yes
    Ethernet:
    Type: Ethernet
    Hardware: Ethernet
    BSD Device Name: en0
    IPv4 Addresses: 192.168.1.102
    IPv4:
    Addresses: 192.168.1.102
    Configuration Method: DHCP
    Interface Name: en0
    NetworkSignature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:21:29:c3:12:ae
    Router: 192.168.1.1
    Subnet Masks: 255.255.255.0
    IPv6:
    Configuration Method: Automatic
    DNS:
    Domain Name: cruzio.com
    Server Addresses: 74.220.64.45, 74.220.64.55
    DHCP Server Responses:
    Domain Name: cruzio.com
    Domain Name Servers: 74.220.64.45,74.220.64.55
    Lease Duration (seconds): 0
    DHCP Message Type: 0x05
    Routers: 192.168.1.1
    Server Identifier: 192.168.1.1
    Subnet Mask: 255.255.255.0
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:16:cb:af:11:7f
    Media Options: Full Duplex, flow-control
    Media Subtype: 100baseTX
    FireWire:
    Type: FireWire
    Hardware: FireWire
    BSD Device Name: fw0
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:1f:5b:ff:fe:17:17:2a
    Media Options: Full Duplex
    Media Subtype: Auto Select
    Software:
    System Software Overview:
    System Version: Mac OS X 10.5.5 (9F33)
    Kernel Version: Darwin 9.5.0
    Boot Volume: Macintosh HD
    Boot Mode: Normal
    Computer Name: Trisha Foster’s Mac mini
    User Name: Trisha Foster (tiger)
    Time since boot: 59 minutes
    ATA:
    ATA Bus:
    PIONEER DVD-RW DVR-K06:
    Capacity: 423.4 MB
    Model: PIONEER DVD-RW DVR-K06
    Revision: Q614
    Removable Media: Yes
    Detachable Drive: No
    BSD Name: disk2
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    Mac OS 9 Drivers: No
    Partition Map Type: Unknown
    S.M.A.R.T. status: Not Supported
    Volumes:
    SPORE:
    Capacity: 368.7 MB
    Media Type: CD-ROM
    Writable: No
    File System: ISO Rockridge
    BSD Name: disk2s0
    Mount Point: /Volumes/SPORE
    Audio (Built In):
    Intel High Definition Audio:
    Device ID: 0x83847680
    Audio ID: 8
    Available Devices:
    Headphone:
    Connection: Combo
    Speaker:
    Connection: Internal
    Line In:
    Connection: Combo
    S/P-DIF Out:
    Connection: Combo
    S/P-DIF In:
    Connection: Combo
    Bluetooth:
    Apple Bluetooth Software Version: 2.1.0f17
    Hardware Settings:
    Trisha Foster’s Mac mini:
    Address: 00-1f-5b-72-12-aa
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 3.1965 (3.1965)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Macintosh Desktop
    Composite Class Of Device: 3154180 ($302104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 385 ($181)
    Requires Authentication: No
    Services:
    Bluetooth File Transfer:
    Folder other devices can browse: ~/Public
    Requires Authentication: Yes
    State: Enabled
    Bluetooth File Exchange:
    Folder for accepted items: ~/Downloads
    Requires Authentication: No
    When other items are accepted: Ask
    When PIM items are accepted: Ask
    When receiving items: Prompt for each file
    State: Enabled
    Incoming Serial Ports:
    Serial Port 1:
    Name: Bluetooth-PDA-Sync
    RFCOMM Channel: 3
    Requires Authentication: No
    Outgoing Serial Ports:
    Serial Port 1:
    Address:
    Name: Bluetooth-Modem
    RFCOMM Channel: 0
    Requires Authentication: No
    Diagnostics:
    Power On Self-Test:
    Last Run: 10/10/08 4:41 PM
    Result: Passed
    Disc Burning:
    TEAC CD-W540E:
    Firmware Revision: 1.0F
    Interconnect: FireWire
    Burn Support: Yes (Apple Supported Drive)
    Cache: 8192 KB
    Reads DVD: No
    CD-Write: -R, -RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw
    Media: Insert media and refresh to show available burn speeds
    PIONEER DVD-RW DVR-K06:
    Firmware Revision: Q614
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Type: CD-ROM
    Blank: No
    Erasable: No
    Overwritable: No
    Appendable: No
    FireWire:
    FireWire Bus:
    Maximum Speed: Up to 400 Mb/sec
    OXFORD IDE Device LUN 0:
    Manufacturer: Oxford Semiconductor Ltd.
    Model: 0x42A258
    GUID: 0x1D200500648AF
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    OXFORD IDE Device LUN 0 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x444133
    Product Revision Level: 1.0F
    Sub-units:
    OXFORD IDE Device LUN 0 SBP-LUN:
    Graphics/Displays:
    Intel GMA 950:
    Chipset Model: GMA 950
    Type: Display
    Bus: Built-In
    VRAM (Total): 64 MB of shared system memory
    Vendor: Intel (0x8086)
    Device ID: 0x27a2
    Revision ID: 0x0003
    Displays:
    L1916HW:
    Resolution: 1280 x 800 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Memory:
    BANK 0/DIMM0:
    Size: 512 MB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xAD00000000000000
    Part Number: 0x48594D503536345336344350362D59352020
    Serial Number: 0x0000**
    BANK 1/DIMM1:
    Size: 512 MB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xAD00000000000000
    Part Number: 0x48594D503536345336344350362D59352020
    Serial Number: 0x00001*
    Power:
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 10
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On LAN: Yes
    Hardware Configuration:
    UPS Installed: No
    Printers:
    Canon MP830:
    Status: Idle
    Print Server: Local
    Driver Version: 4.8.3
    Default: Yes
    URI: usb://Canon/MP830?serial=19702D
    PPD: Canon MP830
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA:
    Intel ICH7-M AHCI:
    Vendor: Intel
    Product: ICH7-M AHCI
    Speed: 1.5 Gigabit
    Description: AHCI Version 1.10 Supported
    Hitachi HTS541612J9SA00:
    Capacity: 111.79 GB
    Model: Hitachi HTS541612J9SA00
    Revision: SBDAC7MP
    Serial Number: SB2EF9L7G3**
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 111.47 GB
    Available: 63.14 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    USB:
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x27cc
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0xfd
    Keyboard Hub:
    Version: 94.15
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple, Inc.
    Product ID: 0x1006
    Serial Number: 000000000000
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB RECEIVER:
    Version: 25.10
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0xc50e
    Vendor ID: 0x046d
    Apple Keyboard:
    Version: 0.69
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Apple, Inc
    Product ID: 0x0220
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    iPod:
    Version: 0.01
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Product ID: 0x1291
    Serial Number: aa1186ca1738fd28eef1eeb1b22754********
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB2.0 Hub:
    Version: 7.02
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Product ID: 0x0606
    Vendor ID: 0x05e3
    USB 2.0 3.5" DEVICE:
    Capacity: 153.39 GB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk1
    Version: 0.01
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Macpower Technology Co.LTD.
    Mac OS 9 Drivers: Yes
    Partition Map Type: APM (Apple Partition Map)
    Product ID: 0x0073
    Serial Number: BC0*
    S.M.A.R.T. status: Not Supported
    Vendor ID: 0x0dc4
    Volumes:
    miniStack:
    Capacity: 153.26 GB
    Available: 42.96 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s10
    Mount Point: /Volumes/miniStack
    MP830:
    Version: 1.15
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Canon
    Product ID: 0x1713
    Serial Number: 197*
    Vendor ID: 0x04a9
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27c8
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x1d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27c9
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x3d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27ca
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x5d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27cb
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x7d
    Bluetooth USB Host Controller:
    Version: 19.65
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple, Inc.
    Product ID: 0x8205
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    IR Receiver:
    Version: 1.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple Computer, Inc.
    Product ID: 0x8240
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    AirPort Card:
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 1.4.4
    Current Wireless Network: Trisha's iPod
    Wireless Channel: 11
    Firewall:
    Firewall Settings:
    Mode: Allow all incoming connections
    Locations:
    Automatic:
    Active Location: Yes
    Services:
    AirPort:
    Type: IEEE80211
    BSD Device Name: en1
    Hardware (MAC) Address: 00:1f:5b:3e:ce:93
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    AppleTalk:
    Configuration Method: Node
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    IEEE80211:
    Join Mode: Automatic
    JoinModeFallback: Prompt
    PowerEnabled: 1
    PreferredNetworks:
    SecurityType: Open
    SSID_STR: Apple Store
    Unique Network ID: 4BCBEE2D-83B9-4CC1-B110-8D0E8E5DF49C
    SecurityType: Open
    SSID_STR: linksys
    Unique Network ID: F2551FD6-95A7-4F98-9F7F-758A89DBD931
    Bluetooth:
    Type: PPP
    IPv4:
    Configuration Method: PPP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    FTP Passive Mode: Yes
    PPP:
    ACSP Enabled: No
    Display Terminal Window: No
    Redial Count: 1
    Redial Enabled: Yes
    Redial Interval: 5
    Use Terminal Script: No
    Dial On Demand: No
    Disconnect On Fast User Switch: Yes
    Disconnect On Idle: Yes
    Disconnect On Idle Time: 600
    Disconnect On Logout: Yes
    Disconnect On Sleep: Yes
    Idle Reminder: No
    Idle Reminder Time: 1800
    IPCP Compression VJ: Yes
    LCP Echo Enabled: No
    LCP Echo Failure: 4
    LCP Echo Interval: 10
    Log File: /var/log/ppp.log
    Verbose Logging: No
    Ethernet:
    Type: Ethernet
    BSD Device Name: en0
    Hardware (MAC) Address: 00:16:cb:af:11:7f
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    AppleTalk:
    Configuration Method: Node
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    FireWire:
    Type: FireWire
    BSD Device Name: fw0
    Hardware (MAC) Address: 00:1f:5b:ff:fe:17:17:2a
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    Can someone Please help me with any suggestions or otherwisde I will have to go to a Apple store and ask for help there.
    Thank You,
    Trisha Foster
    <Edited by Moderator>

    Hi Trisha,
    The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
    Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
    David

  • I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version.

    I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version??

    Look in your Applications folder.  If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder.  Apple moved the old version there as even they suspected the new versions was a train wreck.

  • I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

    I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
    Thanks.

    BlackList:
    Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
    WhiteList:
    Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
    OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
    Apple 5770 US$250 Avail: in stock
    Apple 5870 US$450 Avail: 2-3 weeks

  • What is a recommended Graphics card for G4MDD running tiger and sometimes..

    What is a recommended Graphics card for G4MDD running tiger and sometimes 9.2.2
    I really need to have both in accelerated mode, looking at my stats I currently have 9000 PRO with 64mb ram... don't need it for games but high end graphics applications currently using Starta Pro 2.5.3 on 9.2.2 which for my current purposes is afficient

    The 9600 runs like crap in OS 9.2.2 with any ATI software you can find because ATI never wrote OS 9 drivers for the 9600. OS 9 ATI software does not recognize the card. You get a basic 2D monitor output that is soft, dull, slightly off-color, and cannot be enhanced with the Monitor's Control Panel calibration utility.
    If you spend any amount of time in OS 9.2.2 or you want to use OS 9.2.2 for any of your old games (even 2-D video clip type games), don't get the 9600.
    I have a 9600 installed in my MDD G4 and now have an original Radeon for Mac PCI video card installed as well. When I want to use any of my OS 9 games, I move the DVI cable from my LCD monitor over to the old Radeon card and restart.

  • Best Graphics and Tuner Card for 865 Pro with XP MCE (Maybe Vista?)

    Hi all,
    I'm looking at rebuilding my 865 Pro
    I haven't upgraded the graphics so what do people recommend as the best AGP card for the 865 Pro
    I have the MSI tuner but I am looking a ditching instant on for MCE would like to get a idea for digital tuning card (I'm in the UK). Would anybody recommend using a combined AGP/Tuner card like the ATI All in Wonder cards or using a USB Tuner?
    I am thinking I will have to stick with XP because of driver support. I have dual boot to Vista at the moment but the wifi doesn't work.
    Idea and Suggestions welcome
    Danny

    Thanks for the reply Stu.
    I tried installing the XP wi-fi driver in Vista and I couldn't get it to work. I didn't try harder as the Mega 865 Pro is not supposed to be Vista compatible.
    Is there a 3rd party driver I should try?
    The reason I would like to upgrade the graphics is to have the option to play some games and I am beginning to find limitation with the on board graphics. I tried to check out second life on the mega the other week and it wouldn't set up because the graphics wasn't up to it.
    I have tried installing a dedicated APG card before - the Gigabyte nVidia Geforce 6600 with heatpipe passive cooling.
    It is a great card but I found every now and then the PC would crash with it running. It is a very tight fit with the TV tuner card and the airflow wasn't good.
    So I am looking at using a small APG card or replacing the tuner. That’s why a combined card seemed to make sense and would free up the PCI slot.
    As power is a problem for some graphics cards is upgrading the PSU an option?
    Thanks
    Danny

  • Any recommendations for a new Graphics card for Mac Pro?

    Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have   output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

    Look at this EVGA card for the Mac

  • Recommended Graphics Cards for Encore / Premiere

    Hi-Dee-Ho Everybody:
    I started a thread yesterday regarding trouble I am having with Encore CS4, specifically, my "Monitor" window just stops, well, monitoring after a short time while manipulating fairy straight forward 720x480 AVI files. Rather than reiterate it all, here's the link:
    http://forums.adobe.com/thread/555265?tstart=0
    It's a new system that I'm using. I had been using Encore successfully for the last 6 months on an older, slower machine - Windows XP Home, 4GB memory, ONE processor core.
    Everything about the new system should improve the performance of Encore: 8GB of memory, Quad Core, 2.5GHz a HUGE harddrive. The only two things that I see could be the cause of my new problems are:
    Windows 7 Home Premium
    Different Graphics Card (Intel G43/G45 Express)
    I've updated EVERYTHING: Windows 7, display drivers, card drivers, the Roxio PX Engine (4.18.16a). All that's done.
    I've heard from many people that they are getting along fine with Windows 7. I am leaning towards this graphics card as the problem. The system was, overall, a great deal but I neglected to ask about the the amount of graphics memory in it.It's just one of those mother board embedded scenarios. I don't know if I should expect much from it.
    So, I was wondering if anybody had any experience with this "card". If not, I was wondering if there was a recommended graphics card for Encore and Premiere. A minimum recommendation for graphics memory?
    Thanks!
    Mark Roberts,
    Toronto

    Mark,
    Many have had problems with embedded Intel graphics chips and various Adobe programs.
    For the vast majority, replacing that with either an ATI, or nVidia, has solved the issue.
    Though it is overkill for general NLE and authoring, I love my nVidia Quadro FX-4500-512MB has worked perfectly. It is older, and more than you need.
    On my laptop, my nVidia GeForce 8800M GTX 512MB has also performed very well.
    One is a higher-end, albeit older, 3-D card, and the other, a "mobile" card. What I am getting at is that most of the offerings from ATI, or nVidia should work perfectly, and better than the Intel chip - plus either source will provide many more new drivers, and in a much more timely fashion, than the Intel.
    Good luck,
    Hunt

Maybe you are looking for

  • Unable to create follow-up document in Portal

    Hi, We are using NetWeaver Portal 7.0 and it is at the latest SP(SP10). When we are trying to create a follow-up document for an opportunity all the fields are getting grayed out and we are unable to create any follow-up document.But from GUI we are

  • Display images stored in the database

    I have images stored in the databse. I followed the steps provided in the oracle documentation. Now i want to retrive the image from the database into a java object that can be dislayed in , say, a JLabel. I am able to retrieve the image from the dat

  • Remove tags from XML using transformation

    Can anybody tell me how to remove empty tags using xsl transformation. <App_Data App="MOD" Name="Metadata_Id" Value="SP1282"/> <App_Data App="MOD" Name="Metadata_Spec_Major_Version" Value=""/> <App_Data App="MOD" Name="Metadata_Spec_Minor_Version" Va

  • Date format in graph

    hi,  is there any way i can have dates on a X-axis for a graph on horizontal orientation ? it seems that i can only have it in vertical many thanks

  • Best Maintance Utility to Buy

    I regret I cannot decide which thread to post this so it may require re-assignment by the moderator. Each person I ask has a different preference of program, depending upon his individual need. Is there a comparative study/analysis on all, or most, o