Recommend development environment for Adobe Drive 4

Looking at what is needed for Adobe Drive 4 and I wonder what the recommended development environment is.
Would this suffice:
Adobe Drive 4 SDK
OSX 10.7
Eclipse Juno 4.2 64Bit
JDK 1.6 64bit
Or should I be looking at 32bit versions?
And should I follow what was in the documentation which was older version, 3.6 of Eclipse for instance?

Please take 32 bit application to set up you dev environment, especially, make sure JDK 1.6 32 bit is used.
Regarding Eclipse, 3.6 is recommended

Similar Messages

Development environment for SharePoint 2013

Hi,
We have requirement for one of the project. Team size would be approximately 30 resources. Development would be entirely for SharePoint 2013 Intranet solution. this will be OOTB Intranet application. We will be developing InfoPath forms and Nintex Workflows.
For such requirement we would like to setup local development environment by using either Virtual Machines.
Can anyone help me to identify that how many VM's would be required for the same? How many simultaneous users can use and work at a time? What other things I need to consider for infrastructure? How can i suggest the best possible solution for this.
Thanks in advance.
Abhijeet Khopade

Hi,
According to your description, my understanding is that you want to set up the environment for SharePoint Development.
Here is a detailed article about configuring development environment:
Setting up a SharePoint 2013 Development Environment
For VM count, it depends on your project development requirements, for VM license and management ,if you are using Hyper-V, I suggest you can create posts in Hyper-V forum:
Hyper-V forum
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Development environment for 10g R2

Guys,
I need to setup a development environment for oracle 10g r2 forms development. I am a new to oracle and due to downsizing we lost our DBAs so I am on my own and need your huge support.........
Current settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *
Secondly, I heard various stuff about development environment and would like your input as well:
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server where oracle is installed? *
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *
Please help me to resolve my confusion so I can present the development environment to my management.....
Thank you soo much...
-Raj
Edited by: user12236377 on Jan 28, 2010 10:55 AM

Current settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *If you want to go with Forms 10G, i would apply the latest patch set (i think its 10.1.2.3, but would suggest to consult Metalink for that)
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server >where oracle is installed? *Yes, you can develop "locally" on your PC using only OC4J, but for integrationtests it might be useful to have an "test"-OAS (Oracle Application server 10.1.2)
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *For running 10G forms in production you will need an OAS (Oracle Application server 10.1.2), not a WebLogic-server.
As an alternative to 10G, you could also start directly using Forms11G, which is the latest release. In this case you need a WebLogic-Server 11-installation both for development as also for production.

Development Environment for Server APIs in Webcenter Interaction 10.3

Hi, I installed “Oracle Web Center Interaction 10.3" on standard environment mentioned by oracle (Window 2003 server, IIS6.0, SQL Server 2005). Everything works fine concerning the portal and services.
I also have visual studio 2005 on the same machine and trying to setup a development environment where I can user server APIs (I start with creating IPTSession).
I am using follwong code to start with:
/String serverConfigDir = ConfigPathResolver.GetOpenConfigPath();
IOKContext configContext = OKConfigFactory.createInstance(serverConfigDir, "portal");
PortalObjectsFactory.Init(configContext);
IPTSession ptSession = PortalObjectsFactory.CreateSession();
Problem: code compiles if I add few dlls, but it do not run, it throws following error
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
I think either server APIs are not more supported in 10.3 or I do not know how to setup the development environment for server APIs.
Can anyone help??

i have already tried putting hardcoded path but it didn't help, morover the previous line gives me correct path.
I issue i mentioned seems to be related with some setting or missing native dlls
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
i got follwing extract from the wsserver-wrapper.log file
INFO | jvm 1 | 2009/02/20 12:26:17 | 2-20-2009 12:26:17.606 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\ptws\10.3.0\bin\..\..\..\common/../settings
INFO | jvm 1 | 2009/02/20 12:26:18 | 2-20-2009 12:26:18.325 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/02/20 12:26:18 | container config context:EAS:wsserver
i didn't modified anything in any config file, just configured everything on one machine with oracle configuration manager

SDSoC development environment for Zynq SoCs and MPSoCs now available

Xilinx has announced the public access release of the SDSoC development environment for Zynq SoCs and MPSoCs. The SDSoC development environment provides a familiar embedded C/C++ application development experience including an easy to use Eclipse IDE and a comprehensive design environment for heterogeneous processing designs based on the Zynq SoC and MPSoC device families.

Sorry about the delay in responding. There isn't a document that spells out the bug fixes right now.
Briefly, the main fixes in 2.0.1 are around:
-Errors related to workspaces having spaces in the path
-Can't stop a server when there's a space in the domain path
-Difficult to create a server against a domain other than the default
-EPL syntax highlighting didn't work in some valid config files.
And a handful of smaller UI oriented fixes.

Hello, Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'l

Hello,
Can you please advise me as to the recommended system requirements for Adobe CC for Photoshop, Illustrator, InDesign, and Dreamweaver (all 4 programs). I'm hoping this is summarized somewhere rather than making me look up and compare all four. I'll be using a windows based PC, and will need a graphics card that can support at least two monitors.

Hi julir
check this System requirements | Photoshop
why photoshop demand?cause photoshop having 3D feature, it mean need high spec,,so if you can run photoshop cc to run ai,indd and dw is posibilty
regards
Deto

Rising development environment for developers on Forms 11g

We installed Weblogic and oracle forms 11g on windows server. now we should allow our application team to develop and compile forms.
Oracle support claims that we should install on every PC Weblogic in order to make possible forms builder 11g installation.
We are looking for another possibility , because the proccess seams to be very complicated and waisted.
Does anyone know how to rise development environment for developers in Forms 11g?
Thank you.

At this time, you are required to install Oracle WebLogic Server (WLS) in conjuction with Oracle Fusion Middleware (FMw) 11g (Forms/Reports). I agree that the process is more difficult that it should be, but if you use the My Oracle Support document, *"How to Install Fusion Middleware 11g Forms and Reports Only [ID 854117.1]"* as a guide, the installation is much easier. Note: You do need an account with My Oracle Support in order to access this document.
Also, because so many have complained about how "Heavy" the installation is for Forms 11g, Oracle is working on a "Lighter" install. Take a look at Grant Ronald's reply in the thread, Re: Forms/Reports 11g Builder without WebLogic. Unfortunately, there is no time table published when FMw 11g Release 2 will be available, but it is nice that Oracle has listened to our complaints and is working to address this issue.
Craig...

Development Environment for G6

I am having problems creating a development environment for G6.
When I was using Plumtree 5.0, I installed a copy of the Portal on my laptop, installed the MSDE version of SQL Server, and everything worked fine.
Now, when I install G6, the Portal server fails on startup because it cannot connect to the database. I have no idea how to troubleshoot this further, since I can connect to the same database using Query Analyzer. The config tool test db connection feature gives me the same error as the portal server startup.
I noticed that 6.0 is only qualified for Windows 2003. Could this be the problem?
Thanks,
Tim Halbach

MSDE isn't supported for G6 (nor was it ever supported, although it just happened to work). There were a lot of core engine changes, so the database access is no longer compatible with MSDE.
The workaround is to use SQL Server Personal Edition (also free). You're limited to 5 concurrent connections, but it works fine.

Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Hi,
I have successfully submitted 2 versions of the application. There are 2 different versions for iPad and iPhone separately. These were developed using Adobe Flash CS6 and AIR SDK - 4.0.0.1628. The category is Lifestyle and app is free.
Now I wanted to add new feature of push notification to both iPad and iPhone versions. I have successfully tested the development version with development profiles and certificates over iPad and iPhone.
Before submitting the app to Appstore I was trying to test the Adhoc version with production environment and profiles but application was not installing to the iPad, it is the same iPad that is used for development. But after searching forums and other help Adhoc version was not installed to iPad the solutions that were tried are as under:
1. Create new certificates and profile for Adhoc
2. Change Entitlement tags in Application xml file
3. Remove existing profiles from iPad to avoid error.
4. Update OS version of iPad to 8.1
But once I try to last point - [4] even development version is not installing. Because there are no provision profiles installed.
Can you please help/guide me how to fix it? I need to test both development and Adhoc versions on the iPad and iPhone.
Some more information -->>
// Development Entitlement key - it is working fine with development environment
<Entitlements><![CDATA[
          <key>aps-environment</key>
            <string>production</string>
        ]]></Entitlements>
//Adhoc Entitlement key - it is not working application does not gets installed, icon turns dark and keeps saying installing once you hit the App icon. I am trying to install app using iTunes, after publishsing in Flash CS6 for Adhoc.
<Entitlements><![CDATA[
         <key>get-task-allow</key>
       <false/>
        <key>aps-environment</key>
            <string>production</string>
       ]]></Entitlements>
// If I try installing using install application to connected device after publishing then the error is:
Device Error: Please check if there is enough space on the device.
But I have enough space on iPhone that I am testing. Remember development version is installing successfully and working fine for notifications.
Thanks
PS: I have also posted the same issue under AIR development but there is no reply -
https://forums.adobe.com/message/6862357#6862357

Resolved for iPhone check here
https://forums.adobe.com/message/6862357#6862357
But iPad after updating to iOs8.1 still not installing even development build. I have changed SDK to latest one 15.0.0.302, any ideas?

Is there an enterprise installer for Adobe Drive?

OK, I may have missed it but I need to rollout to a number of users simultaneously.
As with other Adobe products is there some form of Enterprise package creation/installer?
Cheers
Phil

There is supposed to be a Windows Enterprise Installer, you can follow the installation instructions here http://help.adobe.com/en_US/AdobeDrive/4.2/Adobe_Drive_Admin_Guide.pdf
However, I am getting stuck and need some help.
I have used AAMEE 3.1 to create a package for AD 4.0.0
As stated above when I first ran the MSI file that was created bu AAMEE 3.1 I encountered the following error
WARNING: DW039: Payload {C3BC3DF1-83AB-4808-A672-474E15340D4B} Adobe Drive 4 4.0.0.0 is not installed so should not be there in the deployment file
After reading through the logs I found the entries
C:\Users\username\Desktop\Adobe Drive 4.0\Build\\Setup\runtime\adobe_caps.dll
Caps Library path doesn't exist
Caps Library load Failed or Function Resolving failed
Custom action return code: 65535
There was no "runtime" folder underneath the Setup folder. I looked at the original installer and located the "runtime" folder and copied it to the Setup folder as Laurel mentions above.
I am now seeing this error as the first error in the logs when I run the AAMEE msi file, then it rolls back.
::START TIMER:: [Pre payload :{C3BC3DF1-83AB-4808-A672-474E15340D4B}]
In PrePayloadInstallProc
Adobe Player for Embedding
Adobe Player for Embedding x64
Adobe Drive 4 x64
Microsoft Visual C++ 2005 Redistributable Package (x86)
Microsoft Visual C++ 2008 Redistributable Package (x64)
Microsoft Visual C++ 2008 Redistributable Package (x86)
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2010 Redistributable Package (x86)
Adobe Drive 4
AdobeJRE
Custom action return code: 65535
:: END TIMER :: [Pre payload :{C3BC3DF1-83AB-4808-A672-474E15340D4B}] took 80.5097 milliseconds (0.0805097 seconds)
[ 4564] Wed Apr 17 18:35:47 2013 ERROR
DW030: Custom Action for payload {C3BC3DF1-83AB-4808-A672-474E15340D4B} Adobe Drive 4 4.0.0.0 returned error. Failing this payload.
The summary at the end of the log displays:
WARNING: DW039: Payload {C3BC3DF1-83AB-4808-A672-474E15340D4B} Adobe Drive 4 4.0.0.0 is not installed so should not be there in the deployment file
I have run the Adobe Support Adviser on the log file and I get nspection could not identify any issues.
I have full CS6 Web and Design Premium installed on the computer.
I have tried he same process with Adobe Drive 4.0 and Adobe Drive 4.2 and get the same errors.
Can anyone help, I have a deadline of Friday to have Adobe Drive deployed within our environment......

Development Environment for SP9

Hello,
I need to create some web dynpros in EP 6.0 SP9+. I have eclipse, is there a plug in for eclipse that is compatible with SP9? And, what development environent would you suggest using for developing web dynpros.
regards,
Tom

Hi Thomas,
It's on service.sap.com . Right now the website is down. If the website comes back up then i will post you the exact link.
Try the following link.
https://smpdl.sap-ag.de/~swdc/002007974700000089732005D/JIDE11P_1-10002804.SAR?_ACTION=DL_DIRECT
Message was edited by: Prakash Singh

Trial version of SAP J2EE engine and Development environment for Windows

Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.

Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir

Server for Adobe Drive ...

I want to try Adobe Drive ...
Do you know a link for a DAM server for free trial?
By the way, what will Adobe Drive be in the future?
Will it be continue to live with Creative Cloud side by side?
Thanks a lot ...

MS made a number of changes in the SharePoint 2013 release to enable Adobe Drive (via CMIS connector) + SharePoint to work together (changes were also made to the CMIS connector in the Adobe Drive 4.2 release earlier this year). The changes made by MS were not backported SP 2010.

Share the same SharePoint 2013 development environment for multiple developers

Hi,
We need our developers(more than 2) to use the same ''SharePoint 2013 development server' for different application developments. Their work should not affect each others(like application pool reset etc.). How this can be achieved ?
Thanks,,

Hi Kalai,
Please check the following similar post suggested that each developer could deploy his dll file to each separated web application bin folder by setting Visual Studio property "Assembly Deployment Target" to "Web Application".
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7ee3858f-243c-4f43-a72d-3483ad1506f6/multiple-developers-debugging-on-different-web-apps-on-single-server?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support

Development environment for 'include' files?

My photo album program only has a single page. Each time you
ask for a new page
it calls itself, with a new set of parameters. Some of the
more complicated
pages are generated by setting up a framework (which
specifies the styles to be
used, among other things) and then loading an include file
into it.
Initially I envisaged these as being simple text files, but
inevitably some of
them became quite complex. Developing these in Dreamweaver is
quite a pain,
because it doesn't know about the CSS styles. I did try
making an HTML shell
file and pasting the include file into it, then cutting and
pasting it again to
save the revised version, but this proved to be cumbersome
and very error-prone.
Is there any way of telling Dreamweaver to load an
environment before loading
the include file?
Clancy

> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out.
No. It's only "applied" during Design-time viewing.
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
I guess I don't understand what you are referring to here
with "botched up
comment commands". A comment is a comment, and really does
nothing to the
page at all.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clancy" <[email protected]> wrote in message
news:[email protected]...
> "Murray *ACE*" <[email protected]>
wrote:
>
>>Use Design-time stylesheets.
>
> Thanks Murray,
>
> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out. However I guess that all that
has to be in the
> file
> is an 'include' statement (or perhaps this is what
actually happens), so
> it
> shouldn't lengthen the file noticeably.
>
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
>
> Clancy

Recommend development environment for Adobe Drive 4

Similar Messages

Maybe you are looking for