Recommendation for external hardrive in price and quality

Hi guys, I live in the UK, but still post your suggestions, been looking for a hardrive to store my photos and work from University, the things I never want to lose basically, so don't want to buy the wrong product and don't know good brands when it comes to Macs. Does thunderbolt make a huge difference also?
Thanks!

Thunderbolt is a fast interface, however just like SATA is a fast interface the speed of the storage drives come into play for what your going to get in terms of actual performance.
Since your looking for a simple and reliable storage drive, that would mean a single spindle drive, 5,400 to 7,200 RPM's and Firewire 800/USB 3,2,1 would suffice.
Mac's will get USB 3 eventually, like they got USB 2 eventually, Apple just wants to give Thunderbolt a chance to get established less everyone run out and buy USB 3 drives.
Thunderbolt would be a waste as you'll never use it's speed because your going internal hard drive to external hard drive.
If you had a internal SSD of 500GB and external SSD, then yes Thunderbolt would make a huge improvement.
If you had a LOT of photo's and other data to transfer constantly then you'll see the speed between SSD and SSD on Thunderbolt.
So for you a basic external hard drive for storage would do, but of course always maintain a duplicate copy.
 Most commonly used backup methods explained

Similar Messages

  • I need recommendations for an emac 1.42 and ibook 1.33 compatible external superdrive ?

    I need recommendations for an emac 1.42 and ibook 1.33, OS 10.3 - 10.5 compatible external superdrive ?

    If you need the drive to be able to boot those Macs, you'll need FireWire connectivity. If you ned to use a system optical disk to upgrade or re-install the OS. or repair your hard drive, you must boot from the optical drive. If either computer's built-in optical drive has failed, or does not support reading DVDs, you'l need to boot from an external sooner or later.
    If all you need is a burner, then USB opticals are cheaper and should work fine.
    This firm tests all their stuff for Mac compatibility:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Price%7c0&Ne=5000&N =6866&Ntt=external+optical

  • Recommendation for correct wide angle lens and flash for real estate photos for Canon Rebel T3i?

    Hi I'm new to the forum. I always hire out a professional photog for my real estate photos however have thought that with the amount that I pay them, I could buy my own wide angle lens to do on my own. 
    Any recommendations for what wide angle lens and flash to buy?
    Here are some examples of the work they have done in the past for me:
    Any advice would be much appreciated. I enjoy amateur photography with my family and portraits but am hoping to be able to do more of my own work on my listings. Thanks!
    Solved!
    Go to Solution.

    Your samples look like incredibility simple images to do. I also suspect little artificial light was added. Possibly just a bounce off the ceiling.
    Since you already have a Rebel T3i, I would get the Canon 430 EX, and just one. But be aware it will likely not provide equal coverage for a 10-22mm lens. Ten millimeters is pretty wide even on a T3i. Bouncing off the ceiling will help this.
    Some ceilings may not be good for bounce either.
    Give it a go and you will learn what works and what not. But the old saying, KISS, applies.  You will learn!
    Photshop and/or Lightroom are great additions. They both have learning curves and PS a very long learning curve.
    Still think your photographer is overpaid?  
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Supply recommendations for Improvement of portal performance and create POC

    HI All
    i am not aware of Supply recommendations for Improvement of portal performance and create POC*s, any body let me know wht POC means.
    thanks
    Udhaya.

    POC can stand for a lot of different things: http://www.answers.com/topic/poc
    In a supply management context, it could be Purchase Order Change or Purchase Order Confirmation.
    Regards,
    Sean

  • Recommendations for external monitor in combination with USB 3.0 dock and X1 carbon touch

    Dear Community,
    I'm waiting for my X1 carbon touch and USB 3.0 dock and keyboard/mouse to arrive any time soon. However, I'd be glad to get some help/recommendations on external monitor choice.
    For instance, the new HP envy 27" caught my eye, since it includes speakers, but it comes with HDMI and Displayport connections only. As far as I understood, video connection itselft shouldn't be a problem using a DVI to HDMI adaptor, but how about the resolution of the X1 vs. a HD+ monitor, and how do I use the audio on this monitor (don't want to use the microphone jack in front of the dock, as it should look as minimalistic as possible)?
    Is there a solution? via usb 3.0? or should I better consider another monitor? Anyways, DVI or HDMI, I don't want to connect a separate audio system to the dock. Any recommendations, or is it one of those gadgets that  has not been thought through well enough and you need to wait for the next generation to be developed?
    Many thanks for your help,
    Cheers, jcd

    Since you don't want to use the jack on the dock, you could usethemini-DisplayPortontheX1cTouchasyourvideooutputoption because the version of DP on the X1c Touch includes the ability for audio to streamed over the DP connection in addition to video. This would require a compatible DP monitor. 
    You'll also want the monitor to support audio over the DP connection. The X1c Touch's graphics supports the output of an audio stream over DP and the machine should be be capable of this. This gives you two cables connecting to the X1c Touch -- the DP cable for audio and video and the USB 3.0 cable connecting to the dock. The dock would be attached to keyboard, mouse, USB accessories, and Ethernet (if necessary). 
    As far as what to look for in a monitor, my general recommendation is Dell Ultrasharp. They tend to be a good deal for an IPS monitor with at least an sRGB gamut and a solid warranty. I've never bothered to attempt to stream audio over DP because I have separate speakers for audio. In the same way that my last 3 laptops have been ThinkPads, my last three monitors have been Dell Ultrasharps. The graphics in the X1c Touch should be fine running a 1920x1080, so I wouldn't worry about resolution. It can be a little jarring to use monitors side-by-side when they have different pixel densities, so you'll likely end up treating them as separate display surfaces. I often have e-mail and Pandora open on my T420's screen while I'm doing the bulk of my work on my main monitors. If you think you'll be touching the screen a good bit, then you might want to look into buying a touch capable monitor. Otherwise your brain can become easily confused because it'll begin to think that all computer screens are touch-capable and you'll reach out and try to touch your desktop monitor without thinking. 
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • External hard drive recommendations for OSX 10.4.7 and Windows XP

    I just purchased an iMac20. I used bootcamp and have Windows XP running on a partition. I want to purchase an external hard drive for backup. Recommendations for an easy to use device that will allow backup of both operating systems without too much confusion. Thanks.

    If you have 250GB drive, look for FW400 w/ 320GB.
    I have bought a dozen (FW800/400 mostly) from OWC:
    http://eshop.macsales.com/shop/firewire/usb/eliteclassic

  • Recommendations for external drive?

    I'm looking for recommendations for an external hard drive to add to my iMac G5, 17" flat panel. I want to have enough GBs to use it as a backup AND to be able to store graphics such as my photos, videos and the like — all the components of making DVD movies. Ideally, I will be able to use the external to transfer things from my computer to other computers.
    My G5 has a 250 GB hard drive. I'd like the external to be large enough to contain things I haven't even thought of yet.
    I'm not that savvy when it comes to the workings of computers, so ease of use/simplicity is paramount.
    All recommendations (and reasons why) will be much appreciated. Thank you.
    ccCarol

    Get a firewire drive and use SuperDuper! to make a clone and then regular backups (it's easy). As far as what make of drive, I have always had good luck with LaCie, and there are others who swear by Maxtor or OWC, which you can find here. In terms of size, get the largest one you can afford, in your case I would think at least 500GB. Transferring your video etc can be done to a second partition on your external drive by simply dragging and dropping the data. Partitioning is straightforward, using Disk Utility.
    Let us know what you decide, hope this has been helpful,
    Miriam

  • Need recommendation for external DVD burner drive!

    I'm one of the officers for a film club at the University of North Carolina at Wilmington. Recently, I discovered that we had, in our offices, a fully-functional, if not somewhat dated, iMac G4. After getting the neccessary OS X upgrades (it's now running the latest version, 10.4.8), I need to upgrade the CD drive, which is currently just a CD burner drive. It can't even play DVDs, much less burn them, both things we need to have working if we want people in our organization to be able to use this computer.
    Since I don't want to physically remove the drive and replace it with an internal DVD burner drive, I'd like a recommendation for a good external one. I noticed that there's only one option on the Apple Store, the LaCie d2 DVD+/-RW Drive, and that doesn't look like it's been getting very good reviews. Does anyone have any other options I could choose from?
    iMac G4   Mac OS X (10.4.8)  

    Good point Keith. 
    I have no experience of this model but this one from OWC (a company who get very good press on these boards) promises iDVD 5 and 6 support. It's somewhat cheaper than the Lacie in the Apple store but doesn't have Lightscribe.
    mrtotes

  • Recommendations for external hd for Time Machine backups

    After having my 1TB G-Tech G-Drive Q desktop external h.d. crap out on me for a second or third time, this time for good, I give up on G-Tech. (I also had a faulty 500GB G-Tech portable which had to be replaced.)
    For many reasons, my iMac's Time Machine backups have to be stored on an external hard drive. Two or three times, the external h.d. has become corrupted or something and has had to be reformatted, losing all the previous backups and starting all over again. This time, since the external h.d. is toast, I have no backups at all.
    My MAIN question: Do any of you have a recommendation for an external hard drive - probably desktop, but not necessarily - preferably 1TB - which is RELIABLE?
    Is this h.d. corruption/repeated failure a function of Time Machine? The hard drive itself?
    What good is Time Machine if we lose backups all the time?

    limerick2010 wrote:
    Sorry to butt in, but I'm on the lookout for a solution to make a secondary, offsite back-up of my company's data. I was also looking at the usage of external hard disk for the purpose but am stumbling at a very basic question.
    If the first disk(say 1TB) runs out of space and I connect a new hard-disk, wouldn't Time Machine back up all the stuff previously backed up, all over again on the new disk?
    Exactly. Bt you're talking about two very different things: secondary backups vs. not enough room for primary backups.
    The whole point of secondary backups is having a second, separate set, so if something happens to the primary set (lost, corrupted, disk fails, etc.), you have another complete set. As noted in the link in my previous post, it's also a good idea to use a different app for the secondary set, in case there's a problem with the primary app.
    If your Time Machine disk gets full, you have three choices:
    Let Time Machine start deleting old backup(s) automatically, to make room for new ones. You don't need to keep them forever -- a few months should be plenty for most users.
    Get a new disk and start backing-up to it. Keep the old one "on the shelf" until you're sure you don't need the old backups any longer. You can always view and restore from them via the +*Browse ...+* option, per #17 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    Get a larger disk, copy the old backups to it, and continue backing-up to the new one. See #18 in the FAQ.

  • Recommendation for external drive for time machine

    I just got my new iMac today, and it has a 1 TB hard drive. I've read that I need at least 1.5 TB to run Time Machine. Since the largest drive I own in 1 TB, it's time to upgrade. Suggestions for a good, stable drive that plays well with Time Machine?

    luba petrusha wrote:
    Pondini,
    Thanks. I use my computer for, among other things, photography, and tend to fill the drive. I had to move my music files to an external drive to free up space. My current computer (the one that's being replaced) has a 500 GB hard drive and almost that much data. So I'm looking for a drive that will last me as long as the computer does.
    You're going to have a choice, then, whether to get a relatively-inexpensive external, that probably won't last that long, or a relatively-expensive one that will. All hard drives fail, of course, sooner or later, and since most of us buy largely on price, the low-end externals aren't exactly bullet-proof.
    My other drives (LaCie 250 GB, used only for iTunes, and OWC 500 GB, used for back-up with SuperDuper) are Firewire, and work well.
    Is there an advantage to Time Capsule? I am still using an old Airport Extreme given to me by a friend years ago. Does it warrant replacing, or is Time Capsule an unnecessary expenditure?
    Wireless is fairly slow, but TM can back-up without having a drive physically attached, so it's a bit of a trade-off.
    A Time Capsule, of course, is a combination wireless router and disk drive. So if you already have a reliable router, it may not make sense to get another one. I've never had a TC, but prefer a separate Airport Extreme and external disk drive for it; when the drive fails, I can just get a new one.
    Depending on which Mac(s) you're talking about, there may be another solution as well. If you're going to have both an iMac and a laptop, you can share a drive on the iMac with the laptop. Thus the iMac can back-up directly, and the laptop wirelessly (both have to be running Leopard or Snow, of course, and be on the same local network).
    Just for comparison, doing a small (about 30 gb) full backup, I get about 40 gb/hr via F/W 400 or USB; about 21 gb/hr to a USB disk on my AEBS via Ethernet; about 13 gb/hr wirelessly. That all varies greatly, of course, depending on load, contention, interference, etc.
    And you can do the large initial backup via Ethernet, then shift to wireless. There's also a fairly involved procedure where you can do the first directly-attached, then change, but it's a bit tricky and involves a lot of back and forth.

  • Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users

    There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4.  Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?

    I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems.  Everything is smooth as glass at the moment.

  • Recommendations for External DVD Burner compatible with 10.5 Leopard?

    We still have an older MacBook that we bought in 2007, it works great except for the CD/DVD drive. I need to be able to burn DVD's, could anyone recommend an External DVD Burner that would be compatible with 10.5 Leopard? Or at least give me an idea of what I need to look for to know if it should work before I buy it? Thank you!

    Hello,
    Biggest thing you want to avoid is Bus powered ones, here's one good suggestion...
    http://eshop.macsales.com/item/OWC/VLU2SD24XLS/

  • Recommendations for switching between two machines and one monitor

    Hi,
    I have a MacMini and a MacBook Air, both with Thunderbolt Display ports but I have one monitor. I'd like to switch between the two without having to unplug and plug the monitor back in every time. Any recommendations for some sort of switch or Thunderbolt hub would be greatly appreciated.
    Best,
    Chris

    This should work if the display use display port/mini displayport inputs. A mini display port connectors plugs into the Mac's Thunderbolt port for video
    http://www.kanexlive.com/snapx

  • Need recommendation for external HD

    I need one that can boot my iMac externally since my seagate goflex will automatically go to sleep whenever I boot it from there where it will shut down my Mac.

    Basic Backup
    Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • Any Recommendations for External HD to use with Time Machine?

    Have been using Time Capsule wireless as my drive for Time Machine back-ups for a couple of years with mixed success. It also serves as a wireless router for internet service between all devices in my household.
    Was recently recommended to me to invest in an external firewired hard drive to use for Time Machine so now I'm presented with a dilemma: Which one to choose?
    Need 3 Terabytes and I'm looking at the Iomega Mac Companion (3TB) but see that Apple has discontinued selling it from its store and there's an issue with using USB and FW simultaneously.
    Looking for feedback from anyone whose used this device and/or recommendations on another 3TB drive to purchase.
    Thanks in advance.

    From that broad page The hatter suggested, these specific enclosures (with or without a drive pre-installed) are pretty good.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    The one at the bottom that says 0GB is the same enclosure empty, so that you can pick a separate drive mechanism to install in it. That way you can order the exact drive you want, instead of having them choose from what they have on hand.
    Wireheads will choose the 0GB and install the drive they prefer, most "regular" folks just buy it with a drive already installed and it works (after initializing) right out of the box, no assembly required.

Maybe you are looking for

  • Which one is better, Dreamweaver or Flash for building an awesome website.

    As the title says, I have purchased DreamWeawer and Flash both but I find Flash a little difficult. I bought trainings signed by Imtiaz Ahmed and Ammar Ahmed from St Magazine  . These tought me a lot. I also bought trainings for Dream Weawer from ZJ

  • Drag and drop from Multicolumn listbox to another Multicolumn Listbox

    how do i drag and drop from Multicolumn listbox to another Multicolumn Listbox?/...any example.. use LABVIEW 8.2.1 regard's eyal.

  • JavaScript is required. Enable JavaScript to use OAM Server.

    I want to open an Excel spread sheet stored in a Webdav server using OAM (Oracle Authentication). It works fine on every PC or Mac having Excel 2010, 2013, but it doesn't work in Excel 2007. In Excel 2007 always gives the error "JavaScript is requir

  • Web address deletes as soon as the page loads

    Whenever I click a link, or a recently visited page from the drop down history, as soon as the webpage loads, the web address deletes itself. This is annoying because sometimes I'd like to copy paste it to share with friends. Also, similar problem, w

  • Using Cisco Router as terminal server

    Dear Experts, I would like to use Cisco 2800 Router as terminal server. I use 2T-WIC (Serial) in asynchronous mode, while the remote computer connects to router's port by dial up, using PPP protocol get IP address and access the network. What configu