Recommendation on SLD for XI

Is it best for the XI system to have its own SLD (and replicate to another) or to use a common SLD (like for solution manager)
Thanks

Hi Jeremy,
We do have multiple SLDs at aproductive client.
Usually , we use one SLD for Dev and QA environment. And separate one for Production. Currently we are using in this way . wrt. Administration is concerend I don;t think so it is difficult, becuase usually production environment will be kind of robust environment when compared to other environments.
Regards,
Moorthy

Similar Messages

What is recommended hardware requirement for central SLD?

We plan to have cental SLD for the entire landscape(Small size-ECC 6.0, EP and BI).
So what is the recommended hardware requirement for this SLD?

Hello Sanjai,
Please use the following link to find the complete information about System Landscape Directory. (My recommendation is read the Planing Guide for SLD).
System Landscape Directory (SLD) the SLD paper to develop your strategy.
Hope it helps.
Regards,
Satish.

Technical system in SLD for Exchange Infrastructure prod entry deleted

Hello,
Technical system in SLD for Exchange Infracture does not have any entries.
Integration server entry is also not existing.
adapter engine,domain,integration server,integration directory,integration repository,rwb do not exists.
My main concern is there is no entry for Integration Server - how can I get back this entry . I restarted J2EE engine from NWA but still I am not able to see Integration server entry under Exchange Infrastructure technical system.
I also did RZ70 but no use.
Please suggest.

Hi
One of the steps, when applying note #764176, is to delete all 6 of these entries in the SLD. So deleting the entries is not a big problem. These entries should be automatically created when you have successfully completed all the steps in note #764176. So, I'd recommend to apply all steps in this note.
Also, ensure the system is consistently patched i.e. ABAP, Java and XI components must be on the same SP level. An inconsistently patched system is another possible cause of this error.
What happens when you run the SLDCHECK transaction? Do you see errors here?
Regards
Mark

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Recommended transition solution for ISP:s with enterprise customers?

What would be the recommended solution(s) for ISP:s with enterprises only as customers?
It both needs to support IPv6 and at the same time save IPv4 resources.
Thanks in advance!

Hi,
There are many possible choice for a soft transition of the Service Provider:
- Dual-Stack
The SP can run both protocols in the backbone for a while so he can test IPv6 Service by switching some part of the Network to IPv6 Only and see if it is OK. In case there is a problem he can get back to dual-stack, fix the issue and resume its testing until it is Ok and he can allow IPv6 Only.
- It is possible to provide IPv6 Service without upgrading the backbone to IPv6 Immediately using 6RD if the backbone is IPv4 or 6PE /6VPE (I did the dev-test for 6PE and 6VPE for CISCO for 3 years) if the backbone is IPv4/MPLS. This way the SP can start providing both IPv4 and IPv6 without upgrading the backbone. He can then move slowly to IPv6 with a Dual-Stack period not to switch immediately to IPv6 and allow to fallback if soething is not properly configured to work in IPv6 Only.
With 6VPE, the customer benefit of a dual-stack VPN and recently, CISCO has improved the Support of Multicast in MPLS which was main weakness of MPLS based solutions.
Once the SP has migrated to IPv6 Only, it is still possible to offer dual-stack, IPv4 and IPv6 service to its customers using DS-Lite or better, A+P when it will be available as A+P (dIVI-pd based) does not rely on CGN which has a couple of drawbacks for the SPs.
Once the Customer has migrated to IPv6 Only, it is also still possible to access some IPv4 resources (Networks, servers, applications) using NAT64.
I have a presentation for you:
http://www.slideshare.net/fredbovy/transition-to-ipv6-and-security
And you will find more on my page:
http://www.fredbovy.com
I will be glad to help you further.
Fred Bovy
15 years ccie #3013
18 years ccsi #33517 (former #95003)
IPv6 Forum Gold Certified Engineer
IPv6 Forum Gold Certified Trainer
Email: [email protected]
Web: http://www.fredbovy.com
Wicki: http://www.fredbovy.com/MediaWiki
Twitter: http://twitter.com/#!/Fr

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Logical Sys Name for Business system in SLD for Third Party

Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
Gowri

Hi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

Can I use local SLD for each system?

Hi!
Our company is a big SAP outsourcing with hundreds of SAP systems.
We plan to use the local SLD for each new system (>640).
Is this a possible and good solution?
Point guaranteed.

Jenni,
Please have a look at the below doc on how to place SLD in your landscape, its worth reading and you can decide your dimensions of placing the SLD.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
Best regards,
raj.

Is there a recommended (maximum) size for a catalog?

I'm loading all my photos into PSE9 Organizer on my new MacBook Pro and was wondering if there is a recommended maximum size for a catalog? On my PC I separated my catalogs by year. My 2011 folder contains over 11,000 photos and is 71GB. Is that pushing the limits for efficiency or could I combine years?

One catalog for all of your photos makes sense. Alternatively, as Ken said, catalogs by relatively non-overlapping subject matter areas make sense. I still see no scenario where catalogs by years makes sense, unless you can honestly say that you can remember the years of all of your 68000 photos.
Tags and albums let you organize in ways that are nearly impossible using folders. If your daughter is named Jennifer, for example, and you assign the Jennifer tag to all photos that contain her image, then later when you want to search for pictures of Jennifer, you simply click the tag and boom, there are the photos instantaneously. You don't need to know what folder the photos are in, nor do you need to know what date the photos were taken. If you want photos of Jennifer over the years at Christmas, this is a simple search once you tag the photos, and nearly impossible using folders. The possibilites are endless. You let PSE remember where the photos are, so you don't have to. You let PSE do the searching, instead of you searching the folders.

Can anybody recommend a webcam for my G4 Powerbook..?

Hi all,
Can anybody recommend a webcam for my G4 Powerbook..? Can i buy an external iSight cam or stick to a logitech product for example.
I would really appreciate several replies/suggestions to compare compatability, quality and price issues.
Thx in advance,
shane
G4 powerbook 15inch Mac OS X (10.4.7) 1.67GHZ 1MG Ram 100GB hard drive

In addition to specific devices your options are:-
Any Firewire DV output (6 pin to 6pin) Camcorder
Any Firewire Web cam
Any USB cam that has Mac drivers and this Utility http://www.ecamm.com/mac/ichatusbcam/
The chances are that any USB cam is going to have Windows drivers (if you need them for a Intel)
8:55 PM Wednesday; January 31, 2007

What is the recommended virus software for my MacBook?

what is the recommended virus software for my MacBook?

None, actually, is needed as there are no known viruse affecting OS X.
Helpful Links Regarding Virus Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
If you require anti-virus protection I recommend using ClamXav.

Solaris 10 SPARC Recommended Patch Cluster for 2008 quarter 3 version

Dear All,
Could any one please guide me, where I can download "Solaris 10 SPARC Recommended Patch Cluster" for 2008 quarter 3 version.
I have checked in sunsolve.sun.com, I'm able to find only the latest release.
please guide me.
Thanks and regards,
veera

Ok,
Here's a cute little formula to try using your systems parameters to gain some "head's-up" on an expected or estimated time to complete the patch run.
You will need a few things to prepare.
Number of "real" CPU's (not hyperthreads)
Speed of each CPU as a whole number i.e 2.87Ghz = 2,867
the total number of patches from the cluster i.e. Sept 15th = 381 (Solaris 10)
Network factor if using NFS = 2.5
local cluster file factor = 1.5
Patch cluster on CDROM factor = 3.25
Now, combine all of those elements in this equation:
{ ( #1 * #2 ) / #3 * factor(#4 or #5 or #6) }
This will yield a number in minutes of patch run time. Then all you will need to add is the standard boot up time to get the total of all patching and reboot.
Of course you could write a script to extract all of this information and feed it to "bc -l" to get a quick figure.
Example, on one of my Solaris 10 boxes with the information filled in to the equation:
#> echo "((4*2660)/381)*1.5"|bc -l
#> 41.88976377952755905511
It actually took 44.2 minutes to complete the patching of this box plus another 12 minutes to reboot. But all in all a pretty fair estimate I think.

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Recommendation on SLD for XI

Similar Messages

Maybe you are looking for