Recommendations for 4+ star Protectors...

I looked through the forums and found a couple recommended screen protectors for the 3rd Gen iPad. From the ones I found, the following have really good ratings. After reading reviews and searching Google, I am having a hard time deciding. Can anyone provide feedback or recommendations on the following protectors:
iVisor 4.5 stars
http://www.amazon.com/iVisor-iPad-2-...f=pd_cp_kinh_1
Power Support 4 stars
http://www.amazon.com/Power-Support-...ref=pd_cp_pc_0
Spigen 4.5 stars
http://www.amazon.com/SPIGEN-SGP-Ste...ef=pd_cp_cps_1
ArmorSuit 4.5 stars
http://www.amazon.com/ArmorSuit-Mili...ref=pd_cp_pc_1
Thanks.

From past experience, I've had great success with the feel and quality of PowerSupport. I actually started with a Zagg on my iPad 2. I hated what a screen protector did to the feel and image quality on my device, so I took it off after a month and never regretted it. A year later when I sold my device to get the New iPad, there were no scratches whatsoever. So, my New iPad has been "naked" since day one and it too has no scratches. iPads come with an Oleophobic coating, which makes the screens hard to scratch, so unless you're really tough on your devices, I don't think a screen protector is at all necessary. And the last time I checked, Apple doesn't sell them for iPad themselves and if you ask, they'll tell you one is just not necessary.

Similar Messages

Recommendations for iPhone Screen Protector

I have purchased both kinds you can get at the apple store and I just purchased another set at the AT&T. The ones at Apple are okay, but still impossible to put on without having air bubbles and the ones at AT&T are just cheap. With that being said, does anyone have any recommendations on the best screen protector you can buy. Call me a perfectionist, but I don't want ANY air bubbles and I want a screen protector that lasts longer than just a few months.
Thanks!

The best one I've found is offered by 3M. It's a screen protector that has a special coating that makes it hard to read from any angle except straight on - great for prying eyes! Very durable protector, and applied easily with no bubbles. I highly recommend it! I ordered it direct from 3M, just Google it and it'll come up.
Good luck!

What software is recommended for the maintenance of mac?

What software is recommended for the maintenance of mac?

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more heavily promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X used to be so rare that it was hardly a concern, but it's now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
Let go of the Windows mentality that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. The machine should not be a focus of your attention. You shouldn't have to think about it at all. It should be a transparent, almost unnoticeable tool by means of which you communicate, work, and play. If you want a computer that depends on you to keep going, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Recommendations for a new monitor?

Greetings,
I'm looking for a new monitor for my Powermac G4 450 MHz AGP (sawtooth).
I'm currently using a Formac Gallery 1740 after 6 years it's starting to faded out on me.
I'd really appreciate any suggestion or Recommendations for a new one.
Aisha K.

I'm using a 17" LCD, Acer model AL1706 on my G4 400MHz AGP. Was plug 'n play and has been flawless over the years. I'm sure the current model numbers are different.
 Cheers, Tom
Here's some Acer model LCD monitors.
http://www.amazon.com/Acer-19-inch-Flat-Panel-Monitor/dp/B0002X8TVW
Message was edited by: Texas Mac Man

Need a printer recommendation for a small office

hey folks, hoping someone might be able to suggest a recommendation for our business. We’ve had an OkiData color laser printer that’s lasted over 6 years but it’s been giving us some trouble over the last year and yesterday it stopped printing with an error we can’t resolve. Would have to bring a tech in to fix and we’d basically already decided that once this thing bit the dust we’d move on to something else. It’s time.
We are looking for something in the $200-$400 range, would consider going a little higher if it was clearly worth it. We want something that connects wireless, prints quickly and reliably in Snow Leopard over an Airport Extreme network, decent color print quality is important but doesn’t have to be photo quality (we have an HP Photosmart for that kind of stuff), and it needs to have reasonable printing cost per page. We don’t print a tremendous amount of stuff, but we probably go through 100-200 pages a day and it adds up.
Was looking at the HP OfficeJet Pro 8500 wireless and that looks like a nice unit except half the people who buy one hate it. Looks like HP quality control is lacking and if you get a good unit, great, but the odds are good you’ll get a lousy one.
Also looking at the Brother HL-3070CW, but reviews say it has a high consumable cost.
Basically, the more I look into this the more I head spins and now I've got myself wrapped around the axle and don’t know what to do.
Any suggestions would be GREATLY appreciated.

I would steer clear of the 500 express. Since you seem to be new to cisco products, I would use the opportunity and buy what most of your potential customers already have. Get yourself a pix/asa and a 2900 series switch as first poster suggested. If you are interested in certifications, you will need to learn the command line interface. The 500 express will do you no good as it is all gui. This is only my opinion of course. Oh, and did I see not expensive and cisco in the same sentence. :)

Recommendation for maintaining pricing in CRM when R/3 is also in landscape

Hi,
in out context we have already SAP R/3 in the landscape, all the pricing in done in R/3. lot of custom pricing routines are also written in r/3.
now we in the process of implementing CRM and plan to do Quotations in CRM and replicate in SAP R/3 . what is the recommendation for such a scenario.
do we replicate all pricing conditions/procedures in CRM? do we need to re-do all procedures in IPC?
can we re-determine pricing in R/3 so that we can avoid such work in CRM? we are using configurable products in R/3.
please share your thoughts/best practices and any document will be of help.
thanks
RH

Hi Swaroop,
The Assignment of Buisness Partner classification from CRM to R3 is purely based on Classification
so your initial Entry
I chose B as classification & Z001 as an account group which is a copy of 0001. System takes it.
was taken by the system
now when you tried to make another Entry by the same Classification
chose B again & this time Z002 acc gp (copy of 0002), and system does not allow?
it checks for the Existing Classification and so does not allow the same
Delete the Previous Entry and then Try Entering the New Entry
The System shall Take it
Hope it Answered your Queries...
Revert Back for any Doubts..
Also Chk the Link for details:http://help.sap.com/saphelp_crm50/helpdata/en/04/4d9ac77b2b11d3b52f006094b9114a/content.htm
Thanks and Regards,
RK.

Any recommendations for a recovery software for my lost photos on my external drive?

Would like recommendations for a reputable recovery software for my lost photos from my external drive that I used with my MacBook Pro.

General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

What are Best Practice Recommendations for Java EE 7 Property File Configuration?

Where does application configuration belong in modern Java EE applications? What best practice(s) recommendations do people have?
By application configuration, I mean settings like connectivity settings to services on other boxes, including external ones (e.g. Twitter and our internal Cassandra servers...for things such as hostnames, credentials, retry attempts) as well as those relating business logic (things that one might be tempted to store as constants in classes, e.g. days for something to expire, etc).
Assumptions:
We are deploying to a Java EE 7 server (Wildfly 8.1) using a single EAR file, which contains multiple wars and one ejb-jar.
We will be deploying to a variety of environments: Unit testing, local dev installs, cloud based infrastructure for UAT, Stress testing and Production environments. **Many of our properties will vary with each of these environments.**
We are not opposed to coupling property configuration to a DI framework if that is the best practice people recommend.
All of this is for new development, so we don't have to comply with legacy requirements or restrictions. We're very focused on the current, modern best practices.
Does configuration belong inside or outside of an EAR?
If outside of an EAR, where and how best to reliably access them?
If inside of an EAR we can store it anywhere in the classpath to ease access during execution. But we'd have to re-assemble (and maybe re-build) with each configuration change. And since we'll have multiple environments, we'd need a means to differentiate the files within the EAR. I see two options here:
Utilize expected file names (e.g. cassandra.properties) and then build multiple environment specific EARs (eg. appxyz-PROD.ear).
Build one EAR (eg. appxyz.ear) and put all of our various environment configuration files inside it, appending an environment variable to each config file name (eg cassandra-PROD.properties). And of course adding an environment variable (to the vm or otherwise), so that the code will know which file to pickup.
What are the best practices people can recommend for solving this common challenge?
Thanks.

HI Bob,
As sometimes when you create a model using a local wsdl file then instead of refering to URL mentioned in wsdl file it refers to say, "C:\temp" folder from where you picked up that file. you can check target address of logical port. Due to this when you deploy application on server it try to search it in "c:\temp" path instead of it path specified at soap:address location in wsdl file.
Best way is re-import your Adaptive Web Services model using the URL specified in wsdl file as soap:address location.
like http://<IP>:<PORT>/XISOAPAdapter/MessageServlet?channel<xirequest>
or you can ask you XI developer to give url for webservice and username password of server

Which O/S upgrade is recommended for a MAC Book Pro17 with Intel Core Duo 2.16 GHz

Which O/S upgrade is recommended for a MAC Book Pro17 with Intel Core Duo 2.16 GHz
I am using os x 10.4.11.
Do I need to upgrade to 10.5.xx? Will this platform suport 10.6.xx? If 10.6 will work do I need to install 10.5 first?
Thanks...

Hi. Your computer can be upgraded to either Leopard 10.5 or Snow Leopard 10.6. 10.6 will be much easier to find and will be less expensive. Leopard is not required prior to upgrading to Snow Leopard.
Stedman

A Quicktime plugin update is recommended for FF 3.6.4 on mac os 10.4 but no new version is available?

A Quicktime plugin update is recommended for FF 3.6.4 but for mac os 10.4 there is no new version? My current Qt-version is 7.6.4 am I missing something?
== When I updateted to FF 3.6.4

Does this only occur with 10.6.8? I just gave this a try on my 10.8.3 system with AIR 3.6 but couldn't reproduce the crash on quit. However, I also was unable to log into the application due to lack of credentials. Could you please open a bug on this over at bugbase.adobe.com? If we need to log in to reproduce the bug, please send any test credentials to [email protected] Once the bug has been entered, please let me know the bug number so I can attach the symbolicated crash log to the bug report.
Thanks,
Chris
Ps. If you haven't already, can you also try out our 3.7 beta build?
3/26/2013 - AIR 3.7.0.1410 Runtime and SDK Beta

Hardware/software recommendation for video capture prior to edit on home ba

i am a FCP user on a G5. i need to begin to load and initially edit video while traveling and then take that FC project file and load it onto my home based G5 for further work. i am considering a macbook and FC express to accomplish this task.
my questions are:
does it matter that the new macbooks are intel processors and my G5 is not intel based? will i have any compatibility problems with SW/file transfers.
is FC Express the best SW to use for the load and initial edits?
is there a best practice recommendation for what i want to do?
thank you.
dennis
G5 Mac OS X (10.4.9) use FCP HD 5.0.1

FCP will run on a MacBook. It's not support, and the Studio is not supported because of Motion's graphics requirements, but quite a few people are running FCP on basic MacBooks. Just make sure it has enough RAM.

BlackBerry Desktop software recommendations for improvement

BlackBerry Desktop software recommendations for improvement
Recommendation:
1, increase SMS and MMS module
2, the SMS and MMS module to connect to the BlackBerry via Bluetooth

While I love my BlackBerry Curve phone (and will most likely never go back to a phone running Windows Mobile OS), something that drives me absolutely crazy is the inability of the Desktop Manager software to monitor my activity in the Outlook client and autosync changes while my phone is connected via USB.

Recommendations for printer/all in one for use with 10.9+? Help!

Does anyone have recommendations for a printer/all-in-one that will work with Mavericks? Monochrome (b&w) laser printer/all-in-one preferred. This is for a small office (5-8 people). Frequent pdf printing and 30+ page documents.
Right now I'm looking at Brother MFC-7860DW (might need something with a larger capacity), Brother MFC-8710DW, Epson WorkForce WF-M1030 (again, may need something w/ larger capacity), and Canon Laser imageCLASS MF4770n or Canon Laser imageCLASS MF4890dw. Also have looked at Canon imageCLASS MF6160dw but reviews are iffy. Any suggestions would be greatly appreciated!!

Thanks for your help and input, diggernyc. If I was going to say that my question had been answered I certainly would have chosen your response and not my own. It seems silly that you can't undo marking a post as "solved".
If anyone has suggestions, they are still appreciated. Thanks!

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Command-5 shortcut for 5-star rating photos in iPhoto not working

When I go to 5-star rate a photo in iPhoto using the default Command-5 shortcut, the shortcut no longer works.
The Command-1, Command-2, Command-3, Command-4 shortcuts work for (1-star through to 4-star ratings), but for some reason Command-5 no longer works???
There is nothing wrong with my "5" on my keyboard.
I went to my local Apple Store and spoke to a Genius. He said that there is probably a mistake in the iPhoto code, and that the mistake would only be corrected after someone mentioned to apple the problem.
I would like to find out if there is any way firstly to rectify the problem myself? or alternatively how to get in touch with Apple to let them know there is a problem, so that they can fix it by the next software update.
Thanks
Mac specs:
MacBook 5, 1
Mac OS X (10.6.2)
iPhoto '09 version 8.1.1 (419)

Ty trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Regards
TD

Recommendations for 4+ star Protectors...

Similar Messages

Maybe you are looking for