Recommendations for a 2-Node Messaging 6.3 Cluster
Hi all, I'm in the process of building a 2-node cluster to run Messaging Server 6.3 and would like your help. My question is in regard to the layout of the messaging software. For example, should I install the messaging binaries on each node of the cluster and store the configuration/data files on shared storage or store the messaging binaries AND the configuration/data files on the shared storage?
Is the any preferred approach to building a messaging cluster?
Thanks in advance,
Stewart
Hi,
mcleans wrote:
Hi all, I'm in the process of building a 2-node cluster to run Messaging Server 6.3 and would like your help. My question is in regard to the layout of the messaging software. For example, should I install the messaging binaries on each node of the cluster and store the configuration/data files on shared storage or store the messaging binaries AND the configuration/data files on the shared storage?Information on installing messaging with cluster here:
http://blogs.sun.com/SC/entry/java_messaging_server_6_3
http://www.sun.com/bigadmin/features/hub_articles/message_srvr_cluster.pdf
Regards,
Shane.
Similar Messages
-
No Content available for this navigation node message after Portal Upgrade
Hi,
After Portal upgrade to 7.01 EHP1 SP7, when we are clicking on any role at the TLN, the Portal Content area is showing the message " No Content available for this navigation node". However before upgrade when we are clicking on any TLN role the content area used to show the first iview in the folder in the detailed navigation.
Please help as we are in a very critical state.
BestAmeya Pimpalgaonkar wrote:
Hello Mahesh,
>
> Did you happen to see this thread:
>
> Hide "No content available for this navigation node" message
>
> Ameya
Hi Amiya,
I already gone through this thread but iwe will get an empty page if we will change the value of default content to null in the Content Area iview. My requirement is to expand the folder in the detail navigation area and display the first iview in that folder in the content area whenever we click on any role in the TLN.
Mahesh -
Hide "No content available for this navigation node" message
Hello everybody,
we run EP7 SP022. We have a role with several BI reports / iViews. As long as the user selects no report the message "No content available for this navigation node" is shown. As far as I know this is standard behavoir but we'd like to hide this message.
SAP note 1437667 says: "When navigating to a folder/workset/role which has no default content to be displayed, the content area should render the default content component which is configured at property "DefaultContent" in the content area iView. The default value for this property is:
"pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage", which is the pcd location of SAP default content component."
Does anybody know where the mentioned "content area iView" can be found, so that we could change the "DefaultContent" property ?
Thank you in advance.
Regards,
NikolausHi, hope this can help you
In your portal navigation menu
1.- Select the option content manage
2.- Portal´s Content - select your node if you have it, if not select content avaliable for sap.
3.- Content for final user
4.- Portal standar users
5.- Standar Framework Page . open this object
5.1 .-Select internal area of desktop open it.
5.2.- Select option content area and open it.
5.3.- In property category on combo box, select show all by category.
6 .- Search Default Content field and erase this content pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage
Save the changes. -
Help required for temporary removing node 2 from the cluster
Hi Support,
There are some hardware issues on node 2 of 11g RAC cluster and vendor going to fix it;
We want to make node 2 not available until they fix it;
The user will continue with node 1 of the cluster;
Following are the current status of the site and I'm considering to perform the folowing task
while the folllowing command from node 1, i got the following output
D:\srvctl status database –d EPVAL
Instance epval1 is running on node corskmaps001
Instance epval2 is running on node corskmaps001
D:\srvctl status database –d EPPROD
Instance epprod1 is running on node corskmaps001
Instance epprod2 is running on node corskmaps001
I made the following steps in chorological order; I appreciate if someone can correct me if I made any mistake or add/amend/update as per requirement.
Assuming corskmaps002 is our passive mode which will be taken away by HP for hardware checking;
srvctl stop instance –d EPPROD -i EPPROD2
srvctl stop instance –d EPVAL -i EPVAL2
srvctl stop listerner_corskmaps002 –n corskmaps002
srvctl stop nodeapps -n corskmaps002
Do we require stopping service also once we stop the instance? Following are the commands if your answer is yes;
srvctl stop service -d EPROD -i EPPROD2
srvctl stop service -d EPVAL -i EPVAL2
srvctl disable service -d EPPROD -s EPPROD2
srvctl disable service -d EPVAL -s EPVAL2
I appreciate help
ThanksHi Bjoern,
I agree with you, very valid point, thanks for that;
Just for clarification, do you thing the sequence should be like this?
********disable command to start with***********
srvctl disable service -d EPPROD -s EPPROD2
srvctl disable service -d EPVAL -s EPVAL2
*********than instance stop commad**********
srvctl stop instance –d EPPROD -i EPPROD2
srvctl stop instance –d EPVAL -i EPVAL2
************than listener stopping command********
srvctl stop listerner_corskmaps002 –n corskmaps002
*************than node stopping command*********
srvctl stop nodeapps -n corskmaps002
*********do we also require stopping of the service ?>***************************
Do we require stopping service also once we stop the instance? Following are the commands if your answer is yes;
srvctl stop service -d EPROD -i EPPROD2
srvctl stop service -d EPVAL -i EPVAL2
Can you please eleborate further
Then, you also might want to add '-o transactional' or "transactional local" to the
instance stop command so that running transactions are not affected by this.
Thanks -
What is the recommended ratio of publish nodes to dispatcher web servers for CQ5.5?
What is the recommended ratio of publish nodes to dispatcher web servers for CQ5.5?
We are getting conflicting opinions on this form the field. I realize this is a loaded question. I'd like to see how Adobe presents this opinion. In the past scaling at the webserver level was only loosely tied to the publishing layer. Now it seems as dynamic functionality increases the ratio is getting closer to 1:1.
Also,I'd like to know in what use cases this load on publisher increases dramatically.Hello, this is an evergreen. Just call setPickOnBounds(false) on the CustomHexagon.
An issue tracking this problem is open here: https://javafx-jira.kenai.com/browse/RT-17024 -
Recommendation for setting up Data Guard for EBS R12 12.1.3
Hello Experts,
I would like to get some experts opinion and recommendation on setting up Data GUARD for EBS R12.1.3 running on Linux based systems.
Firstly I would wanna let you all know that I am just geek in this subject matter so do excuse me for any mistakes.
While we are planning on setting up Data Gurad fro R12 what are the best practices to consider ?.
We have 2 node rac enabled database and would wanna have non-rac based physical standby, based on this I believe that having db tier on remote or standby site is enough ?
if db node is enough for standby location what are things to be done when a fail over / switch over / role transitioned to standby for the app node from primary site to point db on the
standby location or do we have to have both apps and db tier @ stand by location
--However having a apps tier/node at standby will be of no use as we are planing to run db on mounstate meaning not a active data guard setup.
Please do reply with your recommendation/suggestions/pointers
Thanks in Advance.Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://ec2-107-22-78-224.compute-1.amazonaws.com:8000/webservices/SOAProvider/EbizAuth?Generate=1132&soa_ticket=Tu2z7GYoWPwq-VdgimKRFg..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Can you find any details about the error in the log?
I have looked at the following Note as well:
Error using the Generate WSDL Button in Oracle E-Business Suite Integrated Soa Gateway Release 12.1.1 [ID 1090946.1]Did the doc help?
Any one know what may be causing this issue? Do we have to do additional setup for SOA gateway after the standard install of the OVM? I tried to follow the steps in the note above but I do not see any entry for "<jdbc_url oa_var="s_apps_jdbc_connect_descriptor"/>" in the file data-sources.xml.
Anyone have any ideas?Have you reviewed these docs?
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Oracle E-Business Suite Integrated SOA Gateway 12.1.1 Consolidated One-Off [ID 815196.1]
Thanks,
Hussein -
CRS Install hostname being used by more than once for the same node.
Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
MMake sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B. -
Recommendations for a new monitor?
Greetings,
I'm looking for a new monitor for my Powermac G4 450 MHz AGP (sawtooth).
I'm currently using a Formac Gallery 1740 after 6 years it's starting to faded out on me.
I'd really appreciate any suggestion or Recommendations for a new one.
Aisha K.I'm using a 17" LCD, Acer model AL1706 on my G4 400MHz AGP. Was plug 'n play and has been flawless over the years. I'm sure the current model numbers are different.
Cheers, Tom
Here's some Acer model LCD monitors.
http://www.amazon.com/Acer-19-inch-Flat-Panel-Monitor/dp/B0002X8TVW
Message was edited by: Texas Mac Man -
Note 830576 - Parameter recommendations for Oracle 10g
hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards, -
My recommendations for edits to the Thunderbird "Profiles" section: "Restoring".
Dear Thunderbird "Help" team:
My recommendations for edits to the Thunderbird "Profiles" section:
Things that are not clear, on the page of Thunderbird "...Restoring to a different location..."
https://support.mozilla.org/en-US/kb/profiles-tb#w_restoring-to-a-different-location .
and...
https://support.mozilla.org/en-US/kb/profiles-tb
A.a) Existing: "...Each profile is stored on your hard drive in a profile folder. The folder is named using the following convention:
<random_string>.<profile_name>
...where "<random_string>" is eight digits randomly generated by Thunderbird and "<profile_name>" is the name you assigned to the profile. ..."
A.b) Please replace "digits" with "characters". In common US English, digits are numerical, 0 to 9. (You have it right, in the later paragraph: "Restoring a profile backup". )
B) At "Moving a profile", it is not clear the difference between that and "Restoring to a different location". Please split the two cases, so that each one is complete unto itself. Write separate instruction sets (there is no advantage to economy of words, in a webpage like this.)
B.a) Explain first how to find the file "profiles.ini", by using the Windows Explorer window.
B.b) Recommend that the user first make a backup copy of that file "profiles.ini", in case the work does not succeed, so that the messed-up file can be replaced with the original.
B.c) In the descriptors of "Moving a profile", for the actions to be taken, it is not clear whether each step is... at the location of the backup, or... at the location for the desired new installation. Especially uncertain for Step 3 and Step 4.
B.d) In Step 5, give a better explanation for the path options: - relative or non-relative. How does the user know if the path option has been switched?
Marian BeddillYou spoke to my first item - "digits".
But my BIG problem is the second one. -- "Moving a profile".
I cannot understand the instructions. (*)
The reason, is that it tries to cover TWO CASES/SITUATIONS , jumbled into ONE instruction set.
My request to Mozilla, is to split those instructions into TWO (or more) distinct and separate instruction sets, but with each set dealing ONLY with one case.
Write one set for "Moving a profile".
Write one set for "Restoring to a different location".
This way, the user does not have to try to interpret the "if"-descriptors, while in the middle of trying to accomplish the task at hand.
Doing as I ask, makes for more words, and a longer page. But there is no cost for length of a page, and a great advantage to the user, since the steps to be followed for each case are distinct and are not ambiguous. Do not have any "If-this" detours in the sequence of operations.
(*) PS: I am not dumb on programming. I have been writing code since 1966, and have taught programming in several other nations.
(**) PPS: I still have not been able to move ("replicate") my old profile and message files, from the external backup copy, into the new, clean machine, so that I may continue corresponding from where I left off, when the motherboard crashed. -
Hardware sizing recommendations for B2B Server
My customer Welch Foods Inc. is on 11i Oracle eBusiness Suite and is planning to uptake the latest 1Sync integration features in the PIM product. For out-of-box AS2 connectivity with 1Sync - they are planning to use Oracle B2B Integration Server 10.1.2.3.
They have an average transaction volume of 30 transactions per month. One time - initial load of 20,000 transactions.
Based on the above estimates, they are looking for hardware sizing recommendations for the B2B server.
Your assistance is much appreciated.
Asmi Maharishi
SDM for Welch Foods.Thanks for your reply!
Here are the responses to your queries:
1. Is B2B instance going to run alone in a box
Yes, B2B instance will run alone on a box.2. what will be the size of message
Messages can be anywhere from 5-20 KB3. how many messages will be part of a transaction.
It should be 2 - Registration and publication. But sometimes it depends on how successful the first “registration” goes. Typically we get one or two errors that the users go into PLM, correct and re-send.However, Looking at your current requirement, 30 transaction per month, we can easily address in a 4 GB machine itself.
Additionally, Oracle B2B supports 10+ messages per second in 32GB, 4 processor machine.
Memory suggested above is 4GB, does that take into account memory used by the 10G App server foot print or this is only to take care of messages? Also, how many Processors (Risk IBM) will be needed? -
How to Validate or test SJW parameter For HS CAN Node?
Hi All,
To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ?
I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a HS Node I achieved this by disturbing a Transmit message from the ECU at Tq level and confirm the sampling point by observing Stuff ERRORs ( for the HS node chosen, NBT - was 16 Tqs)
However, please share information in case any one had tested/ Validate SJW parameter for a CAN node.
Please also provide information on Bench setup/ Test Steps if any required.
Tq- Time Quanta
BRP -Baud Rate Prescalar
HS-High Speed
NBT - Nominal Bit Time
Thanks,
GouriHi All,
To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ?
I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a HS Node I achieved this by disturbing a Transmit message from the ECU at Tq level and confirm the sampling point by observing Stuff ERRORs ( for the HS node chosen, NBT - was 16 Tqs)
However, please share information in case any one had tested/ Validate SJW parameter for a CAN node.
Please also provide information on Bench setup/ Test Steps if any required.
Tq- Time Quanta
BRP -Baud Rate Prescalar
HS-High Speed
NBT - Nominal Bit Time
Thanks,
Gouri -
I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?
If you are seldom in a Wi-Fi Network Area, then you can turn off Wi-Fi until you knowingly are in such a Network Area. You can go through your Applications where you don't really need to know the instant an Update is available and turn off the push update notifications. You can turn down the screen brightness. You can set the sleep cycle to 1-min. You could set your email to check for new messages every 30-min. rather than less than 1 min. Just some of many steps available.
-
Current recommendation for a hosting partner?
I found a good convo here from 2013 that yielded one recommendation, and a few stay-away-froms. But that was two years ago. Much can change! Who would you recommend for a good hosting partner today?
My husband's small business is besieged by what is likely a routing or peering issue at Cogent. Regardless, neither our host, Newtek (previously Crystaltech), nor our service provider are willing to help -- not that these situations can be solved, from what I've heard from networking pros and others on the 'net complaining about similar problems. (And by help, I mean having someone in their network ops group call someone down the line in hopes of getting the attention necessary to solve the problem.)
We don't have a choice in service providers due to his location. So, it looks like my best bet in solving the problem is going to be switching hosts. I don't want to -- we've been with them for like 15 years, no kidding! But... this problem has grown from something that popped up briefly once or twice in the morning to a more often than not we can't get to our services and trace routes die MOST of the time.
Vivio Technologies (viviotech.net) got the nod in the last thread. Any additional recommendations? Or, nightmares to avoid?
Thanks!For some sites I host on the side I use Hostek and I cannot say enough good things about them. Uptime has been great. Support on a few issues I did have has been even better.
Avoid Intermedia.net -- their CF support is CF8 (maybe 9) and I don't get any indication that they intent to upgrade. I would also avoid HostMySite.com if your site requires any security -- specifically keeping up with O/S patches. -
Best Xserve recommendation for Ad Studio
Could any please provide best recommendations for Xserve with Ad Studio comprising Raid 5 3-6 TB storage, 10-20 Macs with 3 power uses wanting to work live on 2-3GB files. The xserve will also be connected to existing windows server for exchange mail. The other users are lite office users so main issue is to provide fast secure access for power users. As this is brand new site the only existing requirements is connectivity to the smbs server for mail as all data will be transferred to new xserve.
• A basic, low-end Xserve with two internal hard drives in a mirrored RAID, and a Fibre-Channel card
• a Promise Vtrak RAID with 6TB storage and room for expansion
Depending on your budget, you may also want to set up a Fibre-Channel network for the power users. This is expensive and maybe optional, depending on your performance needs. Gigabit ethernet might work for the power users' connection to the server, but maybe not. For a fibre channel network you'd need:
• a fibre-channel switch
• Fibre channel cards for each of the power users' workstations
• Xsan2 so more than one server/workstation can connect directly to the storage.
• cabling
And, of course, you'll need a solution for backing up all that data.
Message was edited by: Brad21
Maybe you are looking for
-
Lost of functionality on iPad2 when upgrading to iOS 7.0.2
recently upgraded iOS on iPad2. Previous version 6x. showed a flower icon on lock sceen. When selected it would run a slideshow of my photo gallery. Where did this feature go?
-
Transferring from old iPod to new iPod
I have an iPod mini, but have just got a new iPod. Some of the songs on my mini are from my old computer, so I no longer have them. Is it possible to transfer songs directly from iPod to iPod if they are no longer in iTunes?
-
Syncing between ipad to itunes on computer
I downloaded music from i-tunes it to my i-pad. how do i sync it to my computer i-tune so i can sync it to my i-pod?
-
How can i get deleted contacts back on my phone
Some of my contacts got deleted off my iphone 4s, how can I retrieve them?
-
MSS- Team- EmpInfo- General Info- EMPSearch is not displaying Search Result
Hello All, Currently we are using MSS BP 1.3.1 & SAP_MSS 600 SP16... I am going to the navigation MSS->Team->EmpInfo->General Info->Employee Search [Under Employee Selection Dropdown i am selecting Employee Serach Option], here i am getting the view