Recommendations for audio interface with new mac pro to avoid latency?

Hi friends,
I have a new Mac Pro on order for editing video in FCPX, but Presonus says my older Presonus Firebox won't work with Mavericks and the new Mac Pro. Do you have a recommendation for a replacement?
I only use the interface to drive 2 powered expternal speakers and a headset, so I don't need something super sophisticated.
As I read about units, almost all come with USB 2.0 connections. But the new Mac Pro only offers USB, Thunderbolt 2, Dual Gigabit Ethernet, and HDMI 1.4 Ultra HD inputs. If I can't find a fairly inexpensive audio interface with USB 3.0, I'd have to go through another connection to get into the Mac Pro.
The key for me is to make sure and avoid latency, a critical issue for editing video.
Any advice is much appreciated. Thanks. Duncan

Thanks Mark and Smokerz,
Your point about USB2 working in USB3 ports is something I wasn't aware of. That opens a lot of doors for me. And I'll look into the Yamaha sound board as one possibility.
Thank you both for helping me.
Duncan

Similar Messages

I have interface M Audio firewire 400 new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system? Thanks so much

I have interface M Audio 400 with 400 firewire new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system or do I need new software? Thanks so much

If you have a little Firewire adaptor, everything should work fine. It does on my system.

I need lots of USB ports with New Mac Pro, now what?

because I'm in the audio business I needs lot of USB ports with my Mac Pro. On my current 2008 machine, that's not really an issue, with 5 ports on teh MP itself and I installed some USB hubs over PCIe that give me a total of 13 port. I'm not really sure what is the best way to get that amount on the new MP.
Oh, and I really like the stability of my current set up. Before I went with an external USB Hub that always gave me headaches with ports not being recognized.

The only two things I found so far are:
a/ going back to the external USB hubs, which I find very frustrating to work with, because instable with connection and I would need to add some interface to go from USB to TB (which are also rather expensive at the moment)
b/ use some external PCIe enclosures that are really expensive.
So I havent really found the right solution for my situation. Which makes me hesitant to migrate to new MP at the moment.

Using a 30" Cinema Display with new Mac Pro

Hello Everyone:
I just purchased, and waiting to arrive a new 2014 8 core Mac Pro which is an upgrade to my 2009 quad core Mac Pro. I currently use a 30 inch Apple Cinema display which has the DVI connection. I was thinking that I would use a DVI to HDMI adapter and plug the 30" into the HDMI port on the new Mac Pro. I have since heard that people have been having issues with this older monitor getting it to work properly with the new mac pro. some have suggested buy the $99 mini display port to DVI adapter and using that, but I don't believe there is a mini display port on the new mac pro.
I have considered buying a new thunderbolt display because I am assuming that it will have a much better image quality than the older 30 in display but I hate the fact that it's a 27" and I would be giving up the 3" in size. I do a lot of video and audio recording editing and love the extra screen real-estate. Can anyone confirm a couple of things for me?
1. Will the 30 inch display work with a new mac pro and can I use the DVI to HDMI adapter?
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the mach pro?
Thank you in advance.

1. Will the 30 inch display work with a new Mac Pro?
Yes.
Can I use the DVI to HDMI adapter?
Not if you want full resolution. You need a Mini DisplayPort to dual-link DVI adapter
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>
It plugs into a Thunderbolt port (and USB port) on the computer.
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the Mac Pro?
No, it has more pixels (in the vertical direction), but they are spaced a bit more apart, so you don't want to be as close to the display.

Slow render speed with new Mac Pro / NVIDIA 8800

I bought a new Mac Pro to replace a dual G5 because I have a number of Motion projects to finish quickly. My local dealer recommended the NVIDIA 8800 as it has 512 mb RAM (versus 128 on my old machine). I'm finding that the render time is worse than with the G5. I have yet to successfully render a 1 minute segment using Compressor (I've left it to run overnight several times with no success).
In Activity Monitor I'm seeing this message: CompressorTranscoder (Not Responding). But none of Batch Monitor, Compressor or Motion are unresponsive - not indicating any hung applications.
I've read that version 10.5.5 has compromised the NVIDIA card with Motion but haven't been able to get any reliable corroboration. As the Mac Pro shipped with 10.5.5 I can't really roll back to an earlier version.
Any advice? Anyone with similar experiences? I'm trying to render on a new iMac with 4 GB of RAM (with the ATI 2600 video card) but it doesn't seem to be working as it is an hour in and shows at least three more hours.

ChineesYouth wrote:
there's a better post just use the search and type in 3870 or best graphics card for motion
or click here

Bluetooth probs with new Mac Pro

I am setting up my new pooter this evening and I'm having trouble getting my wireless mouse and keyboard (both are Apple branded) to work properly. If the devices are within a foot or two of the CPU they work ok. If they're much farther away than that, they refuse to work. I d/c my wireless system/antenna which is nearby, but that had no effect. My keyboard and mouse work very well on a Mac mini which is located in another room, so I don't think it's a device problem. (Plus, bringing in the keyboard and mouse from that system gives me the same results.) Are there problems with the Bluetooth antenna in the Mac Pros? Is the aluminum interfering with the signal? Thanks for the help, Bill.
Mac Pro 2.66 Mac OS X (10.4.8)
Ti 1G 15 Mac OS X (10.4.3)

the new version of the DBT-120 is bluetooth 2.0. i bought one and it works fine with my mac

VERY upset with new Mac Pro

I just spent over $4,000.00 for a brand new Mac Pro, 8-Core, Two 2.4GHz Quad-Core Intel Xeon “Westmere” processors.
I'm still at the point where I may not be blaming this new computer 100%, but when you upgrade to this extent you expect everything to go faster. You certainly don't expect for things to take longer.
I upgraded from a G5 (not exactly sure what model) running 10.4.11, couldn't go any higher.
My biggest complaint is it takes LONGER to do things!!?? I feel like I'm back in 1999 or 2000. To open an Excel file takes, no kidding, 3-4 minutes. To open a Word file, about 3-4 minutes. I have the newest version of Office there is. Dreamweaver CS5 is slower than ever and jumpy, buggy, what ever word you wanna use. Sending files over to an external server takes 200-300% longer.
I'm really not sure what is going on. Maybe a font conflict issue as I brought all my fonts over from old computer.
Thanks for any advice.

Sorry, and of course wish you had asked us first. And read through
http://macperformanceguide.com/index.html - check "topics" there are 100+ with guides to buying, upgrade etc.
One tip: Do a clean install on another drive
Don't migrate applications, install them fresh
make sure everything is current
Your Mac boots by default and requires 64-bit drivers for 64-bit kernel mode
The idea is more cores isn't faster, faster cores are, and even stock 2.8 4-core is a worthy system. Next choice: 3.2 4-core or sweetest of all is 3.33GHZ 6-core
Add RAM to 6 x 4GB or 3 x 8GB for good measure.
Avoid any plug-in or app that is PowerPC and needs to use Rosetta.
http://discussions.apple.com/thread.jspa?threadID=435350
Fonts have been known to conflict, duplicates, even corrupt.
Of course hard to resist migrating. Or taking time, but G5 owners have had to redo everything and that does work.
A test: do a clean install on another hard drive, do the updates, try that and see how well it goes.
Keep boot drive to just OS + applications and mini-home folder
2nd drive for media library, data
3rd scratch, with a small 30GB Mac OS X just for repairs and emergency use
Try a new user account.
See if you are booting in 32-bit mode
Repair your system with FSCK
Do Safe Mode once
Any cables, peripherals, out of date drivers for printers, external hard drives.
Hard drives that were formatted by G5 using Apple Partition Map should be reformatted to GUID. All. If you brought your old G5 system drive over, move the files to a data drive and reformat. Don't leave the OS from G5 around.

Odd Wireless Mighty Mouse behavior with new Mac Pro?

Hi,
I have a brand new Mac pro and Wireless Apple Mighty Mouse & Keyboard.
The mouse however is not operating properly, it is jerky and slow to respond on a intermittent regular basis. I can move the cursor around the screen but it will stutter and jerk slowly then pick up ok?
I had the mouse and keyboard with my iMac and it worked fine. I have run all updates and re-installed but to no avail. The keyboard is fine.
I suspect it's a hardware issue with my new mac Pro but i'd love it if someone has any other possible causes.
Thanks.

Hi, there's a quite a few people with similar problems, including myself.
My keyboard likes to drop it's connection for no apparent reason, which in turn likes to mess up my mouse and cause it to stutter for a while. Pairing up new devices can do this too, I've found.
It's been thought that some Mac Pro's came with their WiFi and BT wires incorrectly fitted, if you have a search you should find a link to the tutorial if you want to try switching them around.
That said, it didn't make any difference to my BT keyboard and wireless Mighty Mouse, so I switched them back.
I've been hoping for a software fix, but no joy so far, glad I got a three year warranty as standard.

Need help with new Mac Pro (2012)

Hi for everyone!
Few days ago, I bought a new Mac Pro (Mid 2012) MD770LL/A for my recording studio. The workstation is really powerfull and silent, but it has one major problem for me: computer comes with pre-installed Mac OS X 10.7.3 Lion, and as I understand, I can't install Mac OS X 10.6.8 on this machine. In this case, some plug-ins and instruments, that critical for my works are unavailable for me now. For example - MusicLab RealGuitar and RealLPC thru the VST to RTAS adapter (I'm using Pro Tools in my studio) don't working correctly on a Lion OSX. Unfortunately, I can't find any solution, to fix it... Even on an official support website of that software developers. Secondary, I still need Rosetta for some applications.
In that situation, my studio can't fully work.
So, what I should do??? WHY is officialy impossible to install Mac OS X 10.6.8 on a new Mac Pro, if its components is absolutely identic with Mac Pro 2010, that supported Mac OS X Snow Leo???
Thanks!
With a big hope for a help!
Alexey

Hi!
Good news for anyone, who wants to install Mac OS X 10.6.x on a Mac Pro 2012!!!
As it turned out, the original installation DVD disc from the Mac Pro 2010, fully compatible with Mac Pro 2012! The images of DVD is quite possible to find on the Internet. Just checked on my system - boot from the fresh-burned disc, and Mac OS X 10.6.4 installed without problems! After that, updated to 10.6.8 - and it works!
Personally for me - it is great news!
Everyone have a nice day! Thanks!:-)

Will FCP 7 Work with New Mac Pros?

Any indication of I will still be able to work in FCP7 on the new Mac Pro 2013? I'm not too keen on FCPX at the moment. Thanks for any info.

All true, however, FCS 2009 (aka FCS 3) does run with the current OSX (10.8.4) which is two full versions beyond the last supported one (10.6.8).
So, the real answer is, we'll have to wait and see how things play out.
x

Migration Assistant and permissions issues with new Mac Pro

Hi There,
I've not had any significant issues with Migration Assistant in the past but I can't create a reliable system with my new Mac Pro.
After using Migration Assistant during the initial setup, my user account wasn't even transferred. I tried restarting but in the end, I followed these instructions to reset and run the assitant again: http://stationinthemetro.com/2013/11/10/make-mavericks-re-run-the-setup-assistan t
I've just finished running it for a second time, and while the user account is now on my new system, there are so many permissions issues that the system is unusable (I can't even run Safari). Creative cloud, 1Password, safari, Dropbox are all apps that give me Disk i/o or permissions errors.
If I look in the user folder, many directories within it have a red minus icon. I've tried fixing permissions using Disk Utility but something is not right.
In the past, the new system just boots like the old one but this time round, it asked me to create an account after Migration Assistant had finished - is this normal? I used the same username and password as before but I'm not sure Migration Assistantis working properly.
Does anyone know a full-proof way of fixing and transferring my account without having to spend hours downloading OSX for a full erase and install?
Any help would be much appreciated.
Cheers
Ben

Thanks for the reply,
I didn't understand exactly what to put into AppleScript sorry (never used it before) - so I just ran the following from the Terminal:
$ echo $UID
$ sudo chown -R 503 ~
And restarted - everything works now - thanks heaps.
What had happened and is this something I did or did Migration Assistant just get confused?
I have 3 new Mc Pros to setup on Monday so just want to ensure those are hassle free.
Cheers
Ben

Not getting optimal performance out of premiere Pro CC with New Mac Pro

I have just purchased a new mac pro- 8core 64gb of RAM, and D700 graphics cards. I say I'm not getting full optimized performance because my machine will not playback 4k footage at full resolution. Should it? I looked into the package contents of Premiere Pro and notive that the D700 graphics cards were not listed under supported cards. If I type those in will that fix the issue?

No it wont. No editing software out right now will play back 4K media such as Red at full resolution. The latency for processing the codecs is just to high right now. Redcine X Pro can with Red if you have the GPU accelerated Debayering version. Until that decoding is done on the GPU's in the editing applications, you wont see the full res playback most likely. I wouldn't expect the Red Debayering done at the GPU's in Adobe for a while since Red is still refining it.
Eric
ADK

Premeire CC 2014 not playing clips or timeline with New Mac Pro Late 2013 D700

I have used premeire cs5 and cs6 and never had this issue
I just bought a new mac pro and installed the trial of Premeire cc 2014
I import clips like normal, set my sequence and the play button does not work
in the viewer or in the timeline. Can seem to make anything work
also I am on 10.9.5 which from what I can see should be fine.

Hi Ernie,
Try this: create a new user with Admin privileges and see if you can get Premiere Pro to playback video once more.
Thanks,
Kevin

Why does Magic Mouse lag with new Mac Pro?

My magic mouse worked great on the old G5. Works fine an mini mac. Unusable on the brand new mac pro.
I have a $10 laptop mouse from an old pc that is wireless through a tiny usb connector that works 1000 times better.
Why?
<Re-Titled By Host>

I have three MM. One just does not work well. The other two are fine with the 2013 Mac Pro. Sometimes you have to clean the optical lens and sometimes they just don't work on any machine.

Any Way to "Start Over" With New Mac Pro?

Hi,
I just got a new Mac Pro yesterday and did the Migration Assistant to transfer my files from my old G4. However, when it first came up and asked in Setup if I wanted to transfer, I wasn't quite ready (didn't have the old computer connected yet) so I chose to do it later. When I did get connected and did the transfer (and waited SO "patiently" overnight for it to finish!) - I discovered it had not done what I wanted! I wanted it to incorporate my old computer's info into my main Account on the new computer, but it created a 2nd account instead!
At this point, I don't know whether to keep it like this or try to start over. But my question is - is there some way to "reset" the new Mac Pro to start all over and let me do the transfer within the Setup so it will keep everything in just one account? (Short of reinstalling the whole OS from scratch, that is.)
Thanks!

http://discussions.apple.com/thread.jspa?threadID=435350
Install your applications fresh, don't migrate.
If you have a FW drive, that is one way, sneaker net works fine. Assume you don't have an SATA drive from the G4 (if you did it would need to be reformatted).
I would never update or alter the system without first making a backup, but reinstall from DVD should be fast. It can be even faster if you restore the DVD to a small 12GB partition and boot off that, install takes under 10 minutes!
I've seen on MacFixit a tutorial on how the method you used does create a 2nd account, which is why I would have the drive directly connected.
You can also use a program to synch your home folder. I did everything manually, by hand, went through home preferences really carefully and pruned out any old stuff.

Recommendations for audio interface with new mac pro to avoid latency?

Similar Messages

Maybe you are looking for