Recommendations for Comcast-approved modem to be used with AirPort Extreme?

Any recommendations for modems that work well with Comcast and AirPort Extreme? If there are ones that work well or ones to avoid, I'd like to know.
Here's Comcast's list of approved modems:
http://mydeviceinfo.comcast.net/

The motorola sb6120 is what I used with great success. It's a docsis 3.0 modem so it's capable of the latest high speeds that comcast can offer. Good luck!

Similar Messages

Recommended Modem to use with Airport Extreme

I currently have AT&T DSL. It is connected to AT&T's really crummy 2Wire 2701HG-B modem/router combo. I want to ditch the 2Wire and replace it with the Airport Extreme router, but I am told that I will also have to buy a modem to hook up to the router.
Any recommendations on a good modem that is compatable with AT&T DSL, and plays nice with the Airport extreme?

Best to check first with ATT for modems that are compatible with their service and will be supported in the event of connection difficulties.
http://www.att.com/equipment/
It looks like the Motorola 3360 might do what you need.
I have the previous version model....a Motorola 2210.....that has worked just fine for 4+ years with my AirPort Extreme.

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

My house has a wired ethernet to many rooms. Can I have my imac connected via ethernet (then to router via comcast cable modem) and also have my airport extreme connected to another outlet?

Not experianced in networking. Current working setup is wireless network with airport extreme. Having problems with signal so may need to expand network with another airport. My house has a wired ethernet to most rooms. What is the best approach to maintain wireless network and also use ethernet wired connections where convienient?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Modem for use with airport extreme?

I know that the AirPort Time Capsules do not have a built in modem and I need an external one.
I also have ADSL internet as opposed to Fibre so I need to find something suitable to sit between the Time Capsule and the interent. I realise that I could simply use the modem / router supplied by my ISP and switch off the wi-fi on that and just use the modem aspects, but this uses an additiional power source.
My question is: Is there a suitable modem that will sit between the AirPort Time Capsule and an ADSL internet connection that does not need and additional power source?
If not (and I suspect there isn't as I can't find one), then is there any benefit in having a independent modem only device over using the ISP supplied modem / router and switching the router aspects off?
Thanks for any advice as I am having a real nightmare setting up my third party modem / router to work with an Apple network with some additional non-Apple devices and feel that going down the all Apple route of an AirPort would just make my life so much simple...

PPPOA is the big issue..
You cannot bridge to a modem running that authentication. There is no client that will work so the Apple has to be in bridge.. or some dicey double NAT setup.
The Thomson/Technicolor offers a dhcp spoofing but it goes through the NAT and it also causes heaps of issues.. Thomson modem routers have the worst possible NAT called full cone. You must manually bind all UDP ports to the NAT to get access.. and even that is not workable for many functions.
So you are quite right.. it is a mess.
Hence my thought to switch to an Apple router as it automatically opens relevant ports and recognises Apple devices. I have no idea (at this stage) how to set up a router / modem or bridge or other device to sit between the Apple AirPort Time Capsule and the ADSL internet connection.
Using the Apple router to open ports, is not going to help.. because you cannot bridge the modem.
So where do you end up.
The reason I am struggling with my Asus DSL-55n modem is that it is just too complex for me to get to grips with and there is little in the way of support documentation from Asus to assist me is overcoming the specific difficulties I have been having.
What issues are they?
I do not particularly like Asus modems.. they are generally poor firmware.. but have you loaded in the latest firmware.. check for updates because they have been improving.
A solution might be the Draytek 120 modem.. it has a neat little trick where you do PPPoE to PPPoA on the modem.. there are a few that can do it but the only readily available now that I know of is the draytek.
There is a mode in the Thomson called PPTP to PPPoA relay.. this also works very well but Apple do not support these more esoteric connections.. it is better used on a third party router.
If it makes any difference at all, my ISP allocates me a static external IP address which I have paid for and is automatically pushed to whatever router I seem to use.
It is only significant if the authentication method is IPOA .. where you use the IP as static on the router and have no authentication.. but static IP for PPPOA simply means your public IP doesn't change.. useful and helpful but not a solution to this problem.
http://www.draytek.co.uk/products/vigor120.html
Look at the setup for pppoa bridge.
http://www.draytek.co.uk/support/kb_vigor100_setup.html

What's the best ADSL modem to use with Airport Extreme?

My current set up includes an 802.11n Airport Extreme (that I use in conjunction with my Apple TV and MacBook) connected to my Netgear DG834G wireless router (wifi is switched off). The Netgear router is connected by ethernet to 2 Macs, a Skype phone, and my laser printer.
I want to upgrade my LAN to gigabit, and I'm not sure whether I would be better to use a Gigabit switch instead of connecting everything via the router, or whether I should buy a new router which supports gigabit?
Also, I've just been reading about the DrayTek Vigor 100 ADSL2+ Ethernet Modem, and it suggests that it's better to have a separate modem rather than a router. All I know is that in the early days of broadband the USB modems connected to one computer were very unreliable, and that a router was far better.
What is the best way to configure such options? When I first got my new Airport Extreme I found that both it and the router were 'competing' with each other. Is there anywhere to turn to so I can get a better understanding of how to configure these things.
PS. I know my Airport Extreme doesn't have gigabit - but I've just ordered the newer version that does.
Message was edited by: bilbo_baggins

I use the Linksys ADSL2MUE - which I managed to buy for £12.
I configured it in bridged mode - leaving the Apple Extreme do all the firewall and DHCP stuff.
It's not pretty but does the job.

Best multifunction for use with Airport extreme/express??

Thanks to all who can help me pick a reliable multifunction printer with fax to use for my home/business. I will wire it to the Airport Express and share it with my family thru my Airport Extreme Main base station upstairs. I am will to spend extra for features and reliablity.

No multi-function printer will work (except possibly printing only) when connected to the USB port of the Airport Express.
If you need to share a multi-function device ensure that you get one which already has it's own networkable wireless print server and is Mac compatible.
Relevant thread
Kevin Mc, "Recommendations for all-in-one printer w/AEBS" #53, 02:56pm Jun 30, 2005 CDT

Which non apple modem/router work with airport extreme

Hi
My old modem needs replacing. It currently feeds into my airport extreme and an airport express extends the network to my office in the garage. Ideally I want an 'n' speed modem/router and use the airport extreme to extend the network in the garage, doing away with the airport express's slower speeds.
Are there any non apple modem/routers that will work with the airport extreme to extend the network.
Many thanks

+Are there any non apple modem/routers that will work with the airport extreme to extend the network.+
Not if you are planning to "extend" using wireless only.
If you are planning to extend the network by connecting to your new modem/router using an ethernet connection, you have some configuration options to choose from in that case. Post back if you need more details about this.

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

Can i use my airport extreme as a modem with comcast

can i use my airport extreme as a modem with comcast cable

No, since there is no modem on board an AirPort Extreme, so you will need to use an outboard modem if you want the AirPort Extreme to have Internet access.

Will I be able to use my Airport Extreme model A1143 with Xfinity's ARRIS model TG862G/CT wireless modem? If so, how? I want to keep my airport network setting if possible.

Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?

Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
It is really up to you.
1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh.

Can I use an Airport Extreme as a modem and wireless router?

I realize this shows my ignorance, but I am wondering if I need to lease my isp's (Comcast) modem or if I can use and Airport Extreme instead. Thanks for your help.

AirPort Extreme is a router only.....no modem on board.....so you will need a modem to work with the AirPort Extreme if you want to be able to access the Internet.

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

I have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

i have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

Hi
You need to find the format of the drive by looking at its info, my guess would be you are currently in NTFS (windows only) mac can use any mac os journaled or non journaled, or you can use fat32 which is usable on both pc and mac but is unable to move files over 4GB so no good for large file transfers. You will need to re format at some point but this will delete everything currently on the drive.
Hope this helps

Recommendations for Comcast-approved modem to be used with AirPort Extreme?

Similar Messages

Maybe you are looking for