Recommendations for graphics card update

I have a dual processor 867MHz MDD G4 and am thinking of putting in a better graphics card - primarily to (a) see the transparent menu bar in Leopard and (b) improve performance by using any available hardware acceleration on the card instead of CPU clock cycles.
Any recommendations please?

Hi-
The ATI Technologies RADEON 9800 PRO MAC EDITION 4x AGP graphics card will give you the performance boost you're looking for. Core Image and Quartz Extreme are supported with this card, which are needed for embedded OS effects.

Similar Messages

  • Need recommendations for graphics card

    What's out there that is about as good as it gets? My Mac Pro can use a better card. Didn't realize how bad it was until we got a new Mac 17" laptop.
    I'm assuming a change involves no more than extracting the old card, inserting a new one. And running an install for it. Right?

    What's out there that is about as good as it gets? My Mac Pro can use a better card. Didn't realize how bad it was until we got a new Mac 17" laptop.
    ATI Radeon HD 4870 (Despite what Apple says, it will work in any Mac Pro.)
    <http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2NTc>
    I'm assuming a change involves no more than extracting the old card, inserting a new one.
    and connect the two power cables (supplied with the card).
    And running an install for it. Right?
    No software install is needed. The drivers are in the current OSX.

  • Need recommendations: New graphics card for HPE-400y

    Hi!  I'm in need of a new graphics card, but I don't know which one is best for my computer.  My computer is a Hewlett Packard  HPE-400y.   Click here for specs!
    My computers has all the original parts except the PSU and HDD. I recently changed the PSU to a Corsair CX430.  The current hard drive is a WD Caviar Black 2TB. 
    I use my computer for Guild Wars 2, Maya (models and animation), Zbrush, Corel Painter, and Photoshop.
    My current graphics card (Radeon HD 5450) has issues playing Guild Wars 2. The FPS is 30 or lower if I try to play the game with medium or high settings. The FPS also drops when I'm playing the group PVP event known as World Vs World. I often have to have the graphics on the lowest setting in order to get 30 -45 FPS.
    You can find the Guild Wars 2 requirements here: GW2 official wiki -- requirements info
     Click here for Maya 2015 requirements
    Click here for Photoshop requirements
    Click here for Zbrush requirements
    Click here for Corel Painter requirements (When you get to the page, click on system requirements)
    Any and all help is appreciated!  Thank you in advance for your advice and help!
    --srandall

    Hi,
    You should be able to get a double wide card in your PC.  Length may be a problem due to all of the cables. If the space below the optical drive is open then you might try to stuffing the extra cable lengths into that location.
    BTW-- very nice photos.  Not many will go through the effort to do so.
    Consider trying one of the below graphics.  
    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF  Both of these graphics cards are significantly faster then your existing 5450.
    Know what the return policy is before your buy.
    You have an excellent Corsair power supply. I would prefer that you had a 500 watt PSU so that the higher performing graphics cards could be tried.  This NVIDIA GTX 660 specifies at 450 watt minimum but the 12v amperage from your Corsair CX430 is more than sufficient.  It might be worth giving it a go.  It's about 50% faster than the above two graphics cards.  I typically don't recommend that graphics cards be used with PSUs below the graphics card manufacturer's minimum requirements but the Corsair CX430 should work.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can't find recent driver for graphic card (display) cyberaladdin trident

    I can't find recent driver for graphic card (display) cyberaladdin trident.
    The game play with game Warcraft III.
    I downloaded directX 9
    I managed to install the game but I can't play it.
    My display card is Trident Cyberaladdin-T. The game producer told me it is compatible. I tried to find drivers but I haven't find anything efficient. On toshiba site there a driver but quite old (previous to the date I bought the computer...)
    I don(t knox what to do and my son is very disappointed because he can't play with this new game.
    Thanks for your quick answer.

    Hi,
    At first it would be interesting to know for which Operating System your need this driver ? ;)
    Well this Chipset Trident CyberALADDiN-T ( called Napa2T ) was build in three Notebook Types of Toshiba.
    The Satellite 6000, TE2000 and the Satellite 6050. ( Driverversion all with Version 5.01.2527.0128 )
    Normally the drivers you find on the manufacturer Pages are not the actual drivers. They only update the drivers if there are known problems.
    So the only chance for you is to look threw the internet and look if someone else has used this graphic chip,and delivers are newer driver than Toshiba.
    Sorry for the answer, but I had same problem with my Machine, but found a newer driver revision on another manufacturer page.
    bye

  • PPC Quad G5 Graphic Card Update from 6600

    Hi,
    I just got a new EOS 40D, and am wondering if anyone has any info whether Apple will provide graphics card updates for Quad PPC G5 users who have the 6600?
    Is this something they will be doing, ever?

    you mean the PCI-E G5? If so, then it appears that Apple is completely deaf to the thousands of customers that purchased a machine less than a year ago. As of now, there's no way of getting a video card upgrade (short of paying 4 times the retail value for one over at welovemacs.com). If I would have known that this is the level of support that I would have been getting, then I would have waited the extra 6-8 weeks for the 7800GT. fill out a feedback form, and hopefully they'll get the hint:
    http://www.apple.com/feedback/macpro.html
    Dual Core 2.3Ghz G5   Mac OS X (10.4.8)  

  • P6310y Graphics Card Update - What I bought as an upgrade

    p6310y Graphics Card Update
    Hi Everyone!
    I wanted to give back to the community on this one since I got such great support when I asked.  I am a casual gamer, and do a little video work from time to time.  Byeond that, this PC is used for web surfing, email, documents, etc.      I was considering upgrading my graphcs card, which I had already upgraded to the  XFX ATI 4350 1GB several years ago.   When I posted the question, Big Dave was especially helpful and suggested that I look at the MSI nVidia N750 TI or TF.   They both looked like great choices, but were both north of $100 which I had set as a limit.  ( At some point, you just have to consider upgrading the desktop )   I went to my local Tiger Direct and found what has turned out to be a great solution!  I bought a Zotac nVidia GeForce GT 730 2 GB. ( Zotac GT730 LP 2GB 64 bit DDR3 )    I used the FireStorm software ( included with the card ) to overclock it just a little, and it has turned out to be great!   It was about $75, and has allowed me to play World of Tanks with much higher settings while maintaining good FPS ( frames per second ).  
    I hope that helps some of you that are still using this quite capable desktop if you are looking for an upgrade.  

    @Big_Dave 
    Here is one for you!
    @gsmitchell 
    Thank you for posting your outcome.  We always appreciate hearing what solution was reached when asked for help.  It sounds like you made the best choice for you.  Good gaming.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Sim Card update, Wait for sim card update

    I cannot get to my phone book anymore. Instead I get a message "wait for sim card update". I have done all I think I can do. This is a new model 101. It worked fine for a week. My sim card came from an old phone, I know it works,
    please help me.

    Hi forrest12,
    Welcome to the Nokia Support Discussions!
    Have you tried removing and reinserting the SIM on the phone? You can also try to use another SIM for us to further isolate the issue. 
    Let us know the outcome.

  • Recommendations for xd card reader

    I'm a new Mac user and just recently discovered that I cannot simply insert my XD memory cards into my laptop.  Before I go spend money, I was wondering if anyone has a good recommendation for a card reader that they've used with success?  I would really appreciate the help - thanks!

    Card readers are extremely inexpense. They all seem to work just fine.
    http://www.amazon.com/VersaReader-Memory-Card-Reader-Micro-Fiber/dp/B0031V7UXK

  • Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    Did you use the nVidia Hack http://forums.adobe.com/thread/629557

  • HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

    i want  HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7) 

    Hi:
    Below is the link to the support and driver page for your notebook.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
    Your model uses the AMD graphics driver only. Don't install the Intel one.

  • Graphics card update for windows 7 problem

    Hi, I have a 24" iMac 2008 it requires a graphics card upgrade for installing windows 7 i have 10.7 lion running, but it says on checking available disks that it cannot be installed on this disk as it requires 10.6  any ideas the update says 10.6 or later

    The only thing I can think of is maybe Apple doesn't have a Lion compatible Firmware installer?
    If nobody else hops in here with another idea then the only thing I can think of is to get an external HD and install 10.6 back on to it and boot from there and give it ago. If anything you now have a back up disk?
    Maybe try the iMac forums to see how they did it. Just mention you were here already.
    But you MAY have to swap the drives as the firmware installer might not work via booted from an external drive, just the nature of the beast.

  • Graphics card update for hp pavilion 061 version 00x0211RE101LITHI00

    Hi what graphics card would I need for an upgrade for this system :
    Hp Pavilion  061 version 00x0211RE101LITHI00
    Many thanks.

    Sorry, I was unable to locate a "hp pavilion 061 version 00x0211RE101LITHI00" on HP's support pages. When requesting assistance, please provide the full HP model name and/or product number of the computer in question. This information can be found on a sticker on the side, bottom, or back of the computer case. Examples of a model name are "a1632x", "p6130y", "p7-1026", "HPE-180t", "h9-1150", etc. and examples of a product number are "QW790AA", "AZ222AV", "QN595AA", "NY464AA", "RC659AA", etc. Please post back with the requested information.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Recommended video/graphic card specification

    I am currently upgrading to a new PC.  I would appreciate advice re the type of graphics card I should purchase - and why that particular specification.  I'm running Photoshop Premier Elements, V10.
    Tony Haack (New Zealand)

    Ed,
    I am with you. Though I often recommend video (and audio) driver updates, when required, I only do it, WHEN required. I do similar with programs, such as QT Player, when I wait for reports to come in from the field, before I update. Even then, I keep the "last known good" version around, just in case.
    Good luck, and I do hope that Intel might have finally "gotten it," regarding their video drivers. They make great chips, but the driver support has been lacking badly. As most programs do not really rely THAT much on video drivers, so long as it will get something onto the monitor, that is usually good enough. Programs, like PrE, PrPro, AE and now Photoshop, rely very heavily on the video driver, and if it's obsolete, will usually not function well. As the extreme gaming industry drive nVidia and ATI/AMD, they are constantly re-working their drivers, as those games also stress the video driver. Intel has just never been in that market. My fingers are X'ed for all Intel video chip users. Heck, Intel has a very big presence in the Valley of the Sun, and I have used their CPU's for decades, with no issues. I like Intel, but just understood that I could not trust them to update video drivers - until maybe now.
    Hunt

  • Need suggestions for Graphics Cards

    In perusing the posts on this site, I've not quite seen my needs addressed. I do need a recommendation for a graphics card or cards.
    My concern in rendering in Final Cut Express and various effects and masks in Photoshop. MY 20 GIG RAM on my Mac Pro 667 MHz bus, dual quad core intel still renders video slowly. I currently have a NVIDIA GeForce 7300 GT. Should (can?) I add memory to the card, add more cards, replace this card?
    I could not care less about gaming or Boot Camp.
    BTW, is this Mac Pro considered "first generation?"
    Thanks,
    Adam

    1. Yes, your Mac Pro is refered to as "1st Generation".
    2. No, you can't add memory to the card or upgrade the card in any way, you can only replace it (or buy a new card and keep the current one in a different slot for a 2nd monitor).
    3. Currently the best graphics card option is the nVidia 8800GT Upgrade for the 1st Generation Mac Pro. There's still the ATI x1900xt available, but it's more expensive, slower, louder and has massive heat problems. nVidia Quadro is overkill.
    4. The other question is, will the new card help? It will certainly affect some Final Cut operations, rendering of Video effects in Motion, but I doubt you'll see much difference in Photoshop, since that app doesn't make much use of the video card's processor.
    Photoshop filters and final movie rendering are mostly affected by the Mac's CPU, so in some areas, depending on what you do, you might not see a difference at all.

  • Drivers assistance required for graphics card and fingerprint reader with W8 & Pavilion DV7-6B01ED

    Hi - I own a HP Pavilion DV7-6B01ED and recently upgraded from W7 Home Premium to W8 Pro. Everything appeared to work fine except for the graphics card I have which now seems to always be on with the fan running, getting hot and running down the battery much more than before. I can not confirm what was reported as the graphics card in W7, but it is reported as the AMD 7000M after the upgrade. My invoice reports that it is a HD6490. Further to this, W8 reported an issue with this device in Device Manager.
    Due to another issue (not hardware related) I decided to do a clean install of W8 which would also let me clean things up and to re-partition my disk.
    In doing so I deleted the HP_TOOLS and the Recovery partitions. I'm not against recreating these but needed to delete them as I had 4 primary partitions and could not work within the restriction that comes with this. I understood from reading online that these can be recreated and the necessary tools re-installed (or another solution with DVD / USB employed). If the solution to my problems requires these to be installed, I'm happy to do so.
    After the clean install, I continue to have the graphics card issue (same details as above) and the other issue I have is with the fingerprint reader. It shows up as an unknown device after W8 install (it did not have any issues after the initial upgrade I performed though).
    So I've done plenty of things to try to rectify the issue and this includes installing the HP Support Assistant in the hope that this would help with the drivers. Instead of going through all the steps I've undertaken (I've read plenty in this HP forum and outside of the forum) and used certain W7 drivers, installed this that or the other program but unfortunately to no avail. I cannot get the fingerprint reader working and I still have a very hot and noisy laptop.
    I'm good enough with OS and device driver installations and happy to get stuck into some unorthodox solutions if needs be. What can I do to resolve these issues?
    Regarding the graphics card - is it a case that AMD have yet to release an updated driver? If so, I can live with that but in the meantime I would like to turn off the AMD card and work only with the integrated Intel graphics. Disabling the device in Device Manager does not seem to work. How do I do that?
    The fingerprint reader is no big deal, but ideally I would like it working. What to do here?
    If I need to do a re-install of W8 again and then get stuck into the driver installations I'm good with that, but would like to do it in a manner that will let me resolve these issues in the future without too much hassle.
    The spec of my machine is: HP DV7-6B01ED 17.3FHD / i5-2430 / 8GB / 750GB HDD / HD6490
    Thanks!

    Hello AttackofZaq....
    Thanks firstly for your reply. I re-installed W8 to start from scratch.
    OK, so I thought the AMD driver worked. I had installed it before I posted to the forum but then the problem seemed to have returned. I'll have to play with the settings because just as I type this the fan has started for no reason, same problem as before. Is there any chance Windows Updates in interfering?
    Regarding the fingerprint reader - it hasn't helped. In Device Manager I now see Biometric Devices > Validity Sensors (WBF) (PID=0018). Is there some further software I require in order to use the device. I'm going to install SimplePass to see if that's needed.
    I'll be back with an update.
    chemus79

Maybe you are looking for

  • Unsupported Media Type

    Hi all, I've created a OData service formulated by the following metadata: <edmx:Edmx Version="1.0" xmlns:edmx="http://schemas.microsoft.com/ado/2007/06/edmx">   <edmx:DataServices m:DataServiceVersion="2.0" xmlns:m="http://schemas.microsoft.com/ado/

  • Problem in APDU-case 1:No command,no response

    Hello evrybody.I have done a method in my java card applet which does not return any command data neither response data. I wrote in my APDU script the following(as defined the case 1 in the Zhiqun Chen's book-page 102,says that "P3(the 5th field in t

  • NullPointer Exception

    Hi, When I am reading the model node element, it is throwing error since there is no value from model. But ! I want read the model node element whether it is having value or not so based on that I can assign the value to value node.  but ! it is thro

  • "Connect as...' to WinXP PC will only connect as Guest

    I have a WIndowsXP PC connected to my home network that I want to connect to from my MBPro using a local (Windows) account. I need to do this so that I can access files that belong to that account and are not visible if logged in as Guest. Both compu

  • Richfaces and AdfBindings and FacesCtrlRangeBinding question.

    I am trying out using Richfaces 3.1 along with ADF bindings and using Jdev 10.1.3.1. <rich:scrollableDataTable value="#{bindings.EmpView1.collectionModel}" var="row" <column> <af:outputText value="#{row.EmpName}" /> </column> </rich:scrollableDataTab