Recommendations for iPhone Screen Protector

I have purchased both kinds you can get at the apple store and I just purchased another set at the AT&T. The ones at Apple are okay, but still impossible to put on without having air bubbles and the ones at AT&T are just cheap. With that being said, does anyone have any recommendations on the best screen protector you can buy. Call me a perfectionist, but I don't want ANY air bubbles and I want a screen protector that lasts longer than just a few months.
Thanks!

The best one I've found is offered by 3M. It's a screen protector that has a special coating that makes it hard to read from any angle except straight on - great for prying eyes! Very durable protector, and applied easily with no bubbles. I highly recommend it! I ordered it direct from 3M, just Google it and it'll come up.
Good luck!

Similar Messages

  • Difference between iTouch 4g screen protector & iPhone screen protector?

    Is there a difference between an iPod Touch 4g screen protector and an iPhone screen protector? I need a new one but want to get one from a store instead of ordering online. Thanks for the help!

    The protectors come with cutouts for the fro camera and the cameras are located in different part of the front of the device. Also, the covered dimensions of the screens are slightly different.

  • Clearplex iPhone screen protector?

    Does anyone use a Clearplex iPhone screen protector? Looks like a great product, but there are very little reviews to back up the hype. If not, what is the best screenprotector for the iPhone?

    I bought the Crystal film
    (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=479 E6BBB&fnode=home/shopiphone/iphoneaccessories&nplm=TN612LL/A)
    It came with 2 protectors but I lost the other one since the first one still looks great. Its been on for months and with the constant use in and out of the phone holster, etc it still looks good. Can't help you in regards to if there's a residue or anything.

  • Latest recommendation for custom screen development?

    easy points here  - get 'em while their hot!  : )
    I'm trying to confirm my thoughts/assumptions on the development of custom screens.  We are installing the various pieces of NW04s and expect the majority of our users to access ECC transactions through the SAP Portal (using Web GUI for HTML).  Also, we will have a significant number of custom screen requirements; some may be enhancements to existing SAP delivered screens; others may be new screen development.
    What is SAP's latest recommendation for custom screen development?
    More specifically, what are various options and their advantages and disadvantages?
    For example:
    **Web Dynpro for Java
    + easy Portal integration
    - requires NW Dev Studio/Infrastructure
    **Web Dynpro for Java
    + Development tools within Workbench
    - more difficult to integrate in the Portal
    **Z transaction development with Screen Painter
    **HTML/JavaScript or similar
    etc....
    Thanks,
    Brian

    Brian,
    For me , I have only two choices
    1. Web Dynpro for Java
             Great front end IDE to work with, only issue could be the performance issue, while Java is trying to communicate with SAP ECC.
    2. Web Dynpro for ABAP
              Relatively new, however a good tool to work with. Performance improvement compared to Java Web Dynpro.
    I don't think you should have a concern of integrating this with Portal, as you have a separate iView for ABA Web Dynpro. The screen can be developed on the SAP ECC and then can be called from the Portal screen.
    You still have other options like developing normal dynpro - but that will not give a look and feel of the web interface. BSP / PCUI are the other choices but given the roadmap of SAP for UI, I would stick to Web Dynpro for ABAP / Java.
    Please let me know if you have any questions.
    Regards,
    Ravi

  • What anti virus software is recommended for iphone 3gs

    what anti-virus software is recommended for iphone 3GS?

    You don't need it for an iPhone, assuming that you have not made any unauthorised changes to the OS, such as jailbreaking.

  • Do you recommend using a screen protector for iPhone 5?

    Does iPhone 5's screen scratch easily with normal use? I'm really careful with my Apple products, but I don't want to have scratches on my screen.

    had
    2 ipod  touch never used one
    1 iphone never used one but did crack the back glass a bit a screen protector would not have helped there though
    1 ipad crack the front screen a bit from drop doubt a protector would have helped
    don't really have much in the ways of scratches on any of them but if you are the type who will try to sell
    the device  you own as soon as a new one is released then maybe both a rugged case and screen protector would be a good investment

  • Does dust under the iphone screen protector cause problems for the retina?

    I dont have bubbles under the protector but if I reflect the screen under light I can see tiny dust particles under the protector, they are small white dots. So will this cause issues for the screen and is it worth removing the screen protector itself to fix or will it do nothing to the resolution of the phone?

    will this cause issues for the screen
    No
    will it do nothing to the resolution of the phone?
    no

  • Iphone Screen Protector & Cover

    I'm sorry if im posting in the wrong place im new to these forums and i have a huge question about Screen Protectors and covers...
    The protector that my screen has is starting to come off from the bottom and im scared i might scratch my screen if i lose it all together so ived been looking into protectors that are being sold online and i found these two that people seem to recommend:
    http://www.bestskinsever.com/servlet/the-69/iPhone-Total-Body-Skin/Detail#itemad ded
    which is only 10 bucks shipped but only covers the screen. OR
    http://www.zagg.com/invisibleshield/apple-iphone-cases-screen-protectors-covers- skins-shields.php
    which is about 26 but covers the whole phone plus they have a pretty convincing video heh... any who im wondering if any of you own either of these and can recommend me one. Thanks again and let me just say this phone is by far the best phone i have ever owned but im sure im not the only one who thinks that

    Ordered Zagg's Invisible shield when I ordered the phone, both arrived on the same day and that night I applied the front and back. The front was easy enough and looks great. That "orange peel" kinda look doesn't bother me at all and I rest assured knowing my screen is protected from the beginning.
    The back shield took me a long time to apply, I had to re-apply several times 'cause I was not happy with how it was ending up. It was easy enough to peel back off and re-apply but I needed more solution. The box says you can just add water to the little spray bottle and be good to go. I did this and it worked fine.
    Once finished, I left it alone to cure but in the end I was unhappy with the back shield. It didn't conform as much as I would have liked and I could feel it as i used the phone. I wasn't able to get it on there as perfect as I would have liked. It is a chore. In the end I took it off and it's been off for over two weeks and I have yet to have any scratches on the back of my phone. I am careful with it and whenever I do place it anywhere it's face-down, as the shield is on the screen and protects the phone if it slides, which is hard as it is since the tackiness of the material pretty much keeps it in place.
    On a side note. There's a video of how someone left their Invisible Shielded phone on the roof of their car as they drove on the highway and it stayed in place due to the tackiness of the material. I thought this was silly until I absentmindedly did the same thing myself. I didn't get very far, but I did drive enough that any other phone would have slid right off. I didn't realize it was on my roof till I got a call, my bluetooth car hands-free kicked in, and I heard the phone vibrate....over my head.
    In the end I would say the product is very highly recommended; you may have an easier time applying the back shield. I love the protection I get on the screen, and it is as good as "naked." No bulk at all. Also, if you're ever stupid enough to forget your phone was placed on the roof of your car as you fished for your keys...you haven't lost your investment.

  • IPhone Screen Protector

    I have had my iPhone 3G only a week or so and I am concerned about protecting the touch screen. I have a 3 pack of screen protectors and they appear to be o.k. At the Apple Store they recommended and I purchased Invisible Shield by ZAGG. Installing this reputedly fantastic screen protector is rather involved and I was wondering if anyone has had experience with this product. It does not appear to be something that is easily removed once it is applied. I am concerned that it may affect the touch of the phone. The iPhone appears to be all about touch and I don't want to screw it up by applying something I know nothing about.
    Bob Woolston
    Portland, Oregon

    I used a screen protector for about a month but took it off because the iPhone's screen is glass and very, very hard to scratch... mine is about 9 months old and looks brand new. I do use an iFrogz Luxe case to cover the sides and back though. I used several screen protectors on my Dell PDA but that had a plastic screen that definitely needed protection. Screen protectors can be difficult to apply but easy to remove and I've never seen one that affected the touch sensitivity.

  • Warranty on ZAGG iPhone Screen Protector

    ZAGG InvisibleSHIELD Screen Protector for Apple® iPhone® 4 and 4S - Clear
    Model: BBAPLIPHONE4GLE | SKU: 1032916
    Protect your Apple iPhone 4 or 4S from scratches with this military-grade film that wraps around your phone for full-body protection.
     3.1 Read reviews (63)
    Sale: $29.99
    I bought this screen protector in the store, and I was if I had to go back to the store to get a replacement for it. Does anyone know?

    The lifetime guarantee is through Zagg, the manufacturer. You can initiate the replacement process at the link below,
    http://www.zagg.com/support/register/replacement_process.php
    However if you paid for the installation service, Best Buy should guarantee the installation for 30 days.
    Dan K. | Mobile Specialty Stores
    Any opinions expressed in this post are those of
    the author and do not represent Best Buy Co., Inc.

  • Recommendations for 4+ star Protectors...

    I looked through the forums and found a couple recommended screen protectors for the 3rd Gen iPad. From the ones I found, the following have really good ratings. After reading reviews and searching Google, I am having a hard time deciding. Can anyone provide feedback or recommendations on the following protectors:
    iVisor 4.5 stars
    http://www.amazon.com/iVisor-iPad-2-...f=pd_cp_kinh_1
    Power Support 4 stars
    http://www.amazon.com/Power-Support-...ref=pd_cp_pc_0
    Spigen 4.5 stars
    http://www.amazon.com/SPIGEN-SGP-Ste...ef=pd_cp_cps_1
    ArmorSuit 4.5 stars
    http://www.amazon.com/ArmorSuit-Mili...ref=pd_cp_pc_1
    Thanks.

    From past experience, I've had great success with the feel and quality of PowerSupport.  I actually started with a Zagg on my iPad 2.  I hated what a screen protector did to the feel and image quality on my device, so I took it off after a month and never regretted it.  A year later when I sold my device to get the New iPad, there were no scratches whatsoever.  So, my New iPad has been "naked" since day one and it too has no scratches.  iPads come with an Oleophobic coating, which makes the screens hard to scratch, so unless you're really tough on your devices, I don't think a screen protector is at all necessary.  And the last time I checked, Apple doesn't sell them for iPad themselves and if you ask, they'll tell you one is just not necessary.

  • The need for a screen protector?

    Hi everyone, I just purchased my first ever iPhone, 3gs 16gb the other day and was wondering on the need or importance for having a screen protector. I have a case on my iphone already, but am a bit worried about the screen, but I know that its glass and coated aswell. I bought a zagg invisible sheild and it was rubbish so I removed it straight away. Any ideas/solutions?

    Note that the iPhone 3GS has an oleophobic coating on the screen, and using a screen protector will mean you don't get the benefit. I would say, unless you carry the phone in a pocket with sharp objects then you don't need one. A case is a good idea, because the back of the phone is easily scratched. Going for a pouch would be an even better idea, as you can use it to protect both sides of your phone when in your pocket/bag but take it out when at the office or home, and make the most of the screen (I find the phone feels better to use when not in a case also)

  • Recommendations For Iphone Apps!

    Hello,
    Can I get some recommendations for  some apps I can use for my iphone.
    Thanks!

    You can Google a term such as "essential iPhone apps" or "must-have iPhone apps" and you will get lots of results. People vary as far as which apps they like the best. I also check out the App Store on a regular basis to see what the Top 100 apps are. If a lot of people are downloading an app, it makes me curious about it, and I'm more likely to check it out.
    Happy app hunting!

  • Request help for iphone screen flickering

    I'm using iphone 4. Few days ago (before the software update 6.0.1) i noticed my iphone screen is flickering and blurred.this bug was not fixed after IOS update 6.0.1. Thus showing horizontal lines in the screen.
              please help me

    I did resolve it. I did the reset while the phone was plugged into my computer at home (holding down the home button and power button at the same time, until it shuts down and reboots). It took a few tries but eventually it showed the icon of the plug going into the icon for iTunes.  From iTunes, I did a restore from an older backup, and then reinstalled the update from the computer.  Now it works just fine.  I wonder if maybe the update was just too hefty to pull down via the cellular network.
    If you never did a backup of your phone to iTunes or the cloud, then you'll likely have to do a restore to factory conditions and then do the update.  Incovenient, but better than a paperweight

  • Do you recommend using a screen protector with the new ipad?

    I just got an ipad with retina display.  I am wondering if I need to get a screen protector for it?

    A screen protector can also significantly degrade the touch screen experience.  I know one very talented sketch artist you does some amazing art on her iPad and she says she cannot do it on anything but a naked iPad screen as otherwise the screen looses too much sensitivity.
    They also make most stylus work poorly too, for the same reason (I use a stylus a lot with NoteShelf and Note Anytime for work stuff, and a screen protector really interfers with it).
    Just to warn you that, depending on how you use it and the type of apps you use, you may find them more or a problem then a solution to anything.

Maybe you are looking for

  • Moving songs from an ipod to the computer

    How do I move songs from my ipod onto my computer?

  • RRI not working for calling up transaction BI admin cockpit

    Hi, We have implemented BI admin cockpit and all technical contents and settings are OK, but when we try to navigate to call any transaction (Monitor, Process status TCode ST22, RSA1, RSMO, RSPC etc) by calling RRI than instead of getting the desired

  • Ati Radeon 5770

    Hi guys, My graphics card has recently failed (8800gt) and am currently running on a nvidia gt210 (yes it's poor). This card is not a mac card and does not display the boot screen, but works when the machine has booted. So my question is what is the

  • Acquire Signal with NI-SCOPE 5102

    Hello. i'm a beginner in LabView. I have to acquire signal from a NI-Scope 5102 and I have absolutely no idea how to do that in LabView, I instaled the drivers but in my computer I don't have the acquisition boards. I tried to see the examples and I

  • How can I re-use an InfoPath form in several site collections?

    I have built an InfoPath 2013 form and published it to a SharePoint site. I want to use the same form, but publish it to various other site collections. I do not need the lists to interact with each other, but I would like to save the time of re-crea