Recommendations for Solaris Zones for NW2004S?

I'm new to Solaris zones and would appreciate any recommendations from you regarding the setup of zones to run NW2004S. I did a scan of SapNet and SDN, but found nothing.
So, for example, would you insist on running a Prod instance in the global zone? For an SAP that runs in a zone, which file-systems would you share from the global zone?
Another tips/traps you have would be greatly appreciated.

We consolidated already 7 systems:
root@consbig / >zoneadm list -vi
ID NAME             STATUS         PATH
   0 global           running        /
22 srmtest          running        /zone/srmtest
23 nwdi_ext_1       running        /zone/nwdi_ext_1
32 bbbcpy           running        /zone/bbbcpy
35 icht             running        /zone/icht
40 osiris           running        /zone/osiris
42 bi_oracle_test   running        /zone/biorat
43 hpvm             running        /zone/hpvm
This is a HP DL585 with 4 CPUs and 48 GB RAM (Opteron, not SPARC).

Similar Messages

Lan messenger for Solaris 10 for Sparc server

Hi
Is there any Lan messenger for Solaris 10 for Sparc which can be run on Thin client using sunray 3.1.
Clients need to use messenger using their thin clients.
help in this regard will be highly appreciated
Regards
Thanks

is there a client for YM phone on Solaris??
I use Yahoo phone as my only phone and Win XP somehow refuses to work even after 4 re-installations and does not even show my network adapter. So, if I can find sth to work with Yahoo phone Solaris will be the only OS I need.
BTW the nge0 works fine on Solaris and I am posting this from opensolaris.
thanks everybody.

Req: Checkpointing Disks for Solaris Zones

Is there a way using Solaris Zones to checkpoint a disk? I would like to be able to carry out a series of experiments on a test system and start from an identical configuration each time. VMWare calls this capability "Disk checkpointing," and Solaris Zones appears to somewhat resemble VMWare.

Hi,
since the SCOM Agent is not 'cluster aware' you probably have no other choice than restarting the agent and wait for the next discovery cycle of the solaris logical disks. You can speed this up by manually override the discovery interval for that specific
server. After that the disk is not longer monitored.
If you have the time and knowledge you could set up a custom monitoring for clustered filesystems and disable the standard monitoring for that filesystems. But I think thats quite time-consuming. We have the same issues here with our Solaris and Linux clustered/shared
filesystems but we still live with the workaround of restarting the agent.
Regards

Does Jit for Solaris works for linux?

Can i used JIT for Solaris under Linux platform? what are the implications and any problems that i can encounter. I need to know abt what kinda problems that could be encountered since the project will be used as a prototype for the main project.
OR is there a JIT for linux supported by SUN? i think i saw a link somewhere in java.sun.com that gave me the option of downloading JIT for linux but it said "Sun doesn't support it" beside it, so i didnt download it
thanks

we are using Linux 7.2 and Java 1.4OK, then you're using the HotSpot virtual machine.
How do I explain this as simply as possible? HotSpot has a "built-in JIT", in that it does not interpret the byte codes directly, but does so after translating snippets of byte code into native code. I.e. the VM IS the JIT.
There's no separate JIT you can use to "speed up HotSpot". And anyway, a JIT doesn't "compile" the code in any permanent way - it has to do the translation statically each time the program is loaded.
However, you do have a point - there have been several reports of a slowdown between JDK 1.3.1 and 1.4.0. 1.4.1 hasn't improved much. I'm waiting for 1.4.2.
Things you can try in the meantime:
* Download the full JDK, and use the "java -server" option to use the server VM. If you're running a server-type application (i.e. not a GUI), this might improve things.
* Profile the application using any of the available Java profiling tools (do a Google search - there are free and commercial profilers).
There are a thousand possible reasons why your application is slow - anything from excessive memory allocation to excessive locking to poorly chosen algorithms. A profiler may help you narrow things down a little.

Admin interface for solaris zones

Is there any admin interface available for zones . Like may be web based ?

Mike-Kirk wrote:
Hi Arronfree,
arronfree wrote:
What about xVM Ops center? It looks like it has VM admin but I have not actually seen the program and I have not actually seen a price.
Implicate_Order is right, [Solaris Container Manager|http://www.sun.com/software/products/container_mgr/index.xml] (part of [Sun Management Center|http://www.sun.com/software/products/sunmanagementcenter/index.xml]) provides that single web page to manage (create/destroy/boot/halt/migrate/copy/resource-cap) zones. xVM Ops Center is a fantastic tool for patching and provisioning system amongst other things, but doesn't have all SCMs zone features, yet.
Don't post advertisements. You account will get blocked if you continue with it! I'm blocking your original post.
Kaj

Where to download client for Solaris - Need for 10.2.0.2

I need to install a client on a Solaris sparc server.
I am trying to find the client for 10.2.0.2
So far I have had no luck.
Appreciate the help

http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201sol64soft.html
I don't think there a client version with 10.2.0.2 available yet. You may have to install 10.2.0.1 client software and then patch it to 10.2.0.2 using the regular RDBMS patch (there is no 10.2.0.2 for client alone). I did this some time back.
HTH
Thanks
Chandra Pabba

Upgrading Graphics for Solaris 8 on Dell laptop

I installed solaris 8 for Intel on a Dell Laptop. I could only get the 16 color option working.
What drivers or patches can I use and where can I get them????

Hi,
I don't know what video card you have, but I just downloaded this porting kit for solaris8 intel. It work perfectly on my desktop Dell 4100. I think it will also work for the dell laptop. The porting kit is NOT XFree86; it only make use of the xfree86 drivers for solaris.
For more infos please refer to the following link:
http://soldc.sun.com/developer/support/driver/tools/video/video-index.html
Good luck
timez

Gcc for Solaris 10

where do I get the gcc for solaris 10 for x86 version?

One should be available in /usr/sfw/bin , if you are not happy with that version you could check out blastwave.org or sunfreeware.com for other versions.
7/M.

Need an download accelerator for Solaris 8 (Sparc)

Is there any download accelerator available for Solaris 8 for Sparc architecture.
Thanks,
Amit
[email protected]

The download is available, but it isn't easy to find.
The "Sun Download Center Changes" page also refers to you to the Sun Archive (My Oracle Support Doc 1302856.1). Follow that link and you see a list of products you can download, including Sun Studio 11 (unaccountably listed under Servers and Storage Systems). That link takes you here
https://updates.oracle.com/download/12685437.html
where you can download Sun Studio 11. The one download contains the releases for each platform.

USB ADSL Modem Driver for Huawei MT841 for Solaris Express

Hello Everyone
After initial hiccups of installing Solaris Express in a multiboot system and partition mania,i finally installed Solaris Express on my system.First i installed Developer Edition and upgraded it to Express thinking that Developer Edition doesnt have networking capabilities.
All said and done now i'm unable to access the internet.I'm using Broadband USB ADSL Modem from Huawei,type MT841 with four ethernet ports and one USB port.I dont have ethernet card so i use USB port to connect.
The thing is the modem cd doesnt have a driver for Solaris,but for linux it does.
Where can i find the driver for ADSL modem and how to install it,if i find it?
Is there any alternate way?Expecting a reply(because my last post about multiboot didnt)
Thanks in advance
C.S.Shreeram

Problem Solved!
Un-installing all USB modem device drivers, disconnecting all USB devices and removing all USB host controllers and hubs from the Vista device manager and then rebooting the notebook MADE NO DIFFERENCE.
However when I received the new Thomson SpeedTouch 330 USB ADSL modem drivers on CD-ROM from the manufacturer the modem installed immediately.
I can only assume that there is a problem with the download of Release 4.1 of the Windows Vista driver for the SpeedTouch 330 from this web-page:
http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
... as the drivers on the CD-ROM from Thomson work - but their web download of the driver for the SpeedTouch does not.
The problem was with the driver for Windows Vista - the laptop and modem now work correctly - as they should have done at the first installation attempt!
Thanks for your help.

WLP 10.2 on Solaris 10 for x86 platform

We wish to run WebLogic Portal 10.2 using Solaris 10 for the x86 platform, but discovered that this configuration is not supported by BEA. Does this mean it will not work? If it work, what is the risks using it in a production environment?
Thanks.

My intention is to:
        Restore backup tapes that in the sun v440(sunos5.9 for sparc)on the sap data backup.
        solaris11 for x86 (in vmware)do with the resumption of tests.
         use sap With a version that sunos_64 for sparc,Feasible?
No.
SunOS SPARC is a BigEndian platform whereas SunOS on X64 is LittleEndian, you won´t be able to restore the backup there.
See note 552464 - What is Big Endian / Little Endian? What Endian do I have?
On top of that, there´s no database installation for Solaris x64 for 6.40 versions.
Markus

Updated doc on building bootable DVD for Solaris 10?

Is there an updated document for Solaris 10 for building a DVD bootable disk with installable Flash archive?
The version I found (817-6991) is for Solaris 9 and there appears to be layout differences between 9 and 10.
Looking to build ISO's that can then be burned on a winbox and used in remote locations. This would be for sparc if it makes a difference.
Edited by: krelvinaz on Aug 23, 2008 3:43 PM

Kinda surprised there was no response.
Been looking at the Blueprint as referenced above.... a number of typos, some logic errors and references to things that don't exist. Some of the steps seem dubious and no longer needed (reference by others in other postings about the same).

Solaris 10 Zone for Solaris 11.1 creation with template fails.

Hi,
We are trying to use the Oracle VM Template for Oracle Solaris 10 Zone to create a solaris 10 zone on a solaris 11.1 GZ
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -v
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
Version: 1.0.9.12
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -p /rpool -a 10.83.128.35/24 -i net6 -z testzone
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
IMAGE: ./solaris-10u11-sparc
ZONE: testzone
ZONEPATH: /rpool/testzone
VNIC: vnicZBI83273795
IP ADDR: 10.83.128.35
NETMASK: 255.255.255.0
DEFROUTER: 10.83.128.1
TIMEZONE: Europe/Copenhagen
Checking disk-space for extraction
Ok
Extracting in /opt/scripts/bootimage.8Ham6r ...
100% [===============================>]
Checking data integrity
Ok
Checking platform compatibility
The host and the image do not have the same Solaris release:
host Solaris release: 5.11
image Solaris release: 5.10
Will create a Solaris 10 branded zone.
Checking disk-space for installation
Ok
Installing in /rpool/testzone ...
100% [===============================>]
Attaching testzone
Problem attaching testzone.
More details in /var/sadm/install/logs/solaris-10u11-sparc.log
Cleaning up and exiting.
Friday, May 10, 2013 03:18:01 PM CEST: cleaning up
root@exsolh0005:/opt/scripts#
root@exsolh0005:/opt/scripts# cat /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] ==== Starting: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
[Friday, May 10, 2013 03:17:56 PM CEST] Progress being logged to /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning datasets under rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:17:56 PM CEST] Log File: /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:57 PM CEST] Converting detached zone boot environment 'zbe'.
[Friday, May 10, 2013 03:17:57 PM CEST] Unmounting /rpool/testzone/root
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property zoned=on on rpool/testzone/rpool
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property canmount=noauto on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property mountpoint=legacy on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Mounting boot environment in rpool/testzone/rpool/ROOT/zbe-0 at /rpool/testzone/root (including child datasets)
cannot open 'ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1': invalid dataset name
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: refresh of ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1 failed
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: Error: rpool/testzone/rpool/ROOT/zbe-0: No such dataset.
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning datasets under rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:18:01 PM CEST] Result: Attach Failed.
[Friday, May 10, 2013 03:18:01 PM CEST] Exiting with exit code 254
[Friday, May 10, 2013 03:18:01 PM CEST] ==== Completed: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
Looks like a script bug..
Regards
Claus

Hello All,
I would love to know if someone has a solution to this as I am seeing a similar issue with a slightly different setup.
Solaris 8 and Netra 240. I get the same result with and without patches and finish scripts. After the jumpstart and the failed boot attempt from disk. I can boot from cd, copy the glm driver from the cd to disk, and then everything works as it should. Obviously this is not a solution but only a work around.
Is it something to do with the SCSI hardware architecture used in the *240s?
Edited by: Gareth_Mann on Oct 2, 2007 7:41 PM

I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

If you are seldom in a Wi-Fi Network Area, then you can turn off Wi-Fi until you knowingly are in such a Network Area. You can go through your Applications where you don't really need to know the instant an Update is available and turn off the push update notifications. You can turn down the screen brightness. You can set the sleep cycle to 1-min. You could set your email to check for new messages every 30-min. rather than less than 1 min. Just some of many steps available.

Set rlim_fd_cur=8192 for Solaris 10 Zone?

Hi!
I would like to install SAP Solution Manager 7.0 on Solaris 10 Zone (Sparc 64 Bit).
Unfortunately I could find the file etc/system. Instead I added the project file acording to SAP note 724713.
When I run SAP prerequisite Checker SAPINST tells me that the following will be missed:
set rlim_fd_cur=8192 in etc/system.
Question:
Do I need to add the file etc/system and add them the following commando:
set rlim_fd_cur=8192?
Or does this commando not apply for Solaris 10?
Thank you very much!
regards
Thom

> In solaris 9 and below, it was needed to add the parameter in /etc/system. With solaris 10 no need.
This is not completely true.
The number of maximum open files must be set in the global zone, otherwise you will run into problems once the total number of processes in all zones will be > 1024 - hence you need to also set this in Solaris 10.
A zone has no /etc/system thus that error can be ignored.
Markus

Recommendations for Solaris Zones for NW2004S?

Similar Messages

Maybe you are looking for