Recommendations for third party LR3 web gallery software

I've begun experimenting with the web gallery software in LR3 and have mixed opinions. Does anyone have recommendations/preferences for such. I've played with the SimpleViewer options and with SlideShowPro. Any views on these would be helpful. Or other sources I might have missed.
Thanks in advance for any help,
John Kendrick

John,
I'll add my vote for SlideShowPro for Lightroom. At the beginning of this year when I decided to redo my website, I did a pretty exhaustive search, like you are doing, and I decided to use SSP/LR. I am now struggling with the mobile device Flash issue. SSP Director looks like it will be an excellent solution, but like you, I don't want to use a beta version either.
After trying a few interim solutions, I came up with the following solution/workaround. I made an abridged selection of images from my portfolio and turned them into a video which I put on YouTube. If a user visits my site on a non-Flash device, they will see a link which will guide them to another page into which I have embedded the YouTube video. They do not go to YouTube.com -- I certainly didn't want that. I tried lots of other ways to do the video and the YouTube quality is the best. I still have work to do on the video, and it's not a perfect solution, but at least mobile users can see some of my work and don't hit a dead end on their iPad or iPhone.
Here's the link if you want to check it out:
www.johnblausteiin.com
By the way, the support at SlideShowPro is top-notch. The user forums are great: You post a question and you will get a reply from Todd (owner of SSP) or Tim in a very timely manner.
John

Similar Messages

Recommendation for third party wireless card

I have a client with a dual-core G5. They didn't purchase it with Airport but now they want wireless access.
Unfortunately it looks like you can't install a Extreme card after the fact as you could with the previous PowerMacs. They would have to bring the Mac into an authorized service center to have them install it.
Does anyone know of a PCI based solution? Am I going to have a problem since it uses PCI-express?
Thanks,
Mitch
Dual-Core PowerMac G5 Mac OS X (10.4.3)

The link pulls up a 404 page...drats. When going through the front door on Virgin site, I found their Broadband2Go, but it’s not Mac compatible. Only PC (drats again).
Like the OP, I’d love to find a “pay as you go” broadband solution for the MBP. I travel quite a bit for work, and most of the time can wrap the hotel’s internet charge into the client contract. Still, there are times the trips are on my dime, so it would be great to have a PAYG solution.

Recommended Third Party Archive and Purging Software for Oracle Database (Oracle CC&B)

Hi,
We are currently exploring third party archive and purging software for Oracle Database specifically used by an Oracle Customer Care and Billing implementation. Our current data is growing that we think archiving and purging is a now a viable option. Thanks.
Regards,
Dennis

According to the fine Oracle® Utilities Application Framework Administration Guide Chapter 17, "Archiving and Purging" is readily available to CC&B.

Is there a place for recommendations of third-party apps?

There used to be a place on here to talk about anything at all, but I don't see that now, so I don't know where to ask this question.
It would be nice to have a place to exchange recommendations of 3rd-party software that provides applications not addressed in Apple products.
For example, the old will-maker program I used with OS 9 does not work on OS X. Quicken makes a great one, but it only runs on Windows, and I don't want to get involved with running Windows on my Mac just for that.
If there is a place on here or anywhere else on the web where Mac users exchange recommendations of third-party apps, I would appreciate any details.
And, of course, if anyone has a specific recommendation for a will-maker program, that would be great too.
Many thanks.

a brody:
I'm sorry but I find your response just a tad parental.
You suggest navigating "the entire board" before asking "for too much," even as you go on to recognize how huge and unwieldy it is. I think most of us give it a good shot, exhausting a reasonable amount of search results, before posing a question. And it seems to me that your "given there are resources" could apply to anything at all that one might ask on here. All the answers came from somewhere; a person could go those "resources" instead! The point of these forums, I think, is to help and assist, in a reasonable manner according to reasonable guidelines.
What is the point of making suggestions, if the attitude is "don't you think the moderators have enough work on there (sic) hands"?
When you say "using the forums give plenty of chance to find the right application," well, I just wonder where you would suggest one ask something like "Can anyone recommend a good third-party slideshow application?" I have a hunch that no matter what forum a person plugged that into, someone such as yourself might chastise him for posting off subject!
That is why my point was to ask what happened to the section that used to entertain miscellaneous questions on almost any topic. And it is why I wished aloud for a section where types of (third party) applications could be posted. That would NOT mean, as you seem to suggest, that suddenly a topic for every conceivable kind of application would be created.
And finally, if you think all the information I hope for is already in the forums, or could be asked about and supplied in the existing forums, then I wonder how you think moderators would be additionally overburdened merely because the same stuff was simply more organized and easier to find.
Forgive me if I sound overly defensive, but it seemed to me your response was a bit of a putdown and not very constructive.

Clients status on Software Updates "Waiting for third-party orchestrator to initiate installation"

20 out of 25 clients are all in the "Waiting for third-party orchestrator to initiate installation". What does this mean? They have already passed the deadline. They have downloaded the updates. No installation though except on 5
servers. Below is a piece of the Client log.
<![LOG[Starting install for assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF})]LOG]!><time="04:42:08.435+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1366">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_39672c9b-8955-4d0d-bb4f-201d148029ee) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_c1b1c8a2-0b8c-44ad-82bc-7edcbbdc6ce1) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_7c97c02e-1734-4d5e-aeb4-0db8a7cd7167) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_f27242f3-7eb0-4186-a31f-78b8a7c85cfc) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_99ca576e-12c2-4f99-9dff-2226d03f1ca0) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Update (Site_DD8D5673-FF52-48CD-A2C4-75146D025A96/SUM_4268ea94-52eb-4263-b238-6a2537ba9ad5) not actionable, no attempt required]LOG]!><time="04:42:08.466+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048"
file="updatesmanager.cpp:2978">
<![LOG[Waiting for third-party orchestrator to initiate installation.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="2" thread="16048" file="updatesmanager.cpp:3162">
<![LOG[This assignment ({04CC9BB1-24B6-449F-8354-3E0E1B291AEF}) will be attempted by third-party orchestrator.]LOG]!><time="04:42:08.498+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="16048" file="updatesassignment.cpp:1405">
<![LOG[No pending install assignment]LOG]!><time="04:42:08.529+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="assignmentsmanager.cpp:1500">
<![LOG[No other installations in pipeline. No reboot required.]LOG]!><time="04:42:08.545+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21848" file="updatesmanager.cpp:3583">
<![LOG[EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 1]LOG]!><time="04:46:03.354+300" date="04-26-2012" component="UpdatesDeploymentAgent" context="" type="1" thread="21280" file="updatesmanager.cpp:1495">

It's most likely caused by a client agent setting called "Agent extensions manage the deployment of applications and software updates", see
http://technet.microsoft.com/en-us/library/gg682067.aspx#BKMK_ComputerAgentDeviceSettings. It has to be set to "disabled" if you are not using any third party software that plugs into ConfigMgr.
Torsten Meringer | http://www.mssccmfaq.de

PI 7.1 third-party business system and software component.

Hi,
I wish to know if it is possible to associate a third-party business system to a software version and therefore to a software component.
This is importnat for me to know it applied to teh PI 7.1. I know that for abap and java this is possible.
Any help will be well appreciated.
Thanks in advance.
Regards,
Giovanni

Hi,
go to SLD.......go to Business system......click on new business system to create it.........then select your technical system for third party........then tell the sw component to be linked to the third party business system........then your third party business sytem will be linked to the sw component in PI7.1.
Regards,
Rajeev Gupta

Order related billing for third party. Third party order..

Hi
While we are running batch job for billing system is throwing below error.
Order related billing for third party. Third party order..

Dear Nortel,
Can you Please check whether, during the item category configuration for TAS (T. Code: VOV7); you have marked relevant for billing indicator as F?
Also, maintained the copy control (T. Code: VTFA) between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
Best Regards,
Amit
Note: I would recommend you to Please go-through following document in full, atleast fo once. This will definitely help you to review your settings for Third Party Order Process Customization.
[Third Party Process|http://yasosap.wordpress.com/2008/10/22/third-party-scenario/]

Generate CSR for Third-Party Certificates

Hi All,
i have an issue when i tried to Generate CSR for Third-Party Certificates,
i follow step by step in the document of cisco until this step:
3.
Now that your CSR is ready, copy and paste the CSR information into any CA enrollment tool.
In order to copy and paste the information into the enrollment form, open the file in a text editor that
does not add extra characters. Cisco recommends that you use Microsoft Notepad or UNIX vi. Refer
to the website of the third−party CA for more information on how to submit the CSR through the
enrollment tool.
After you submit the CSR to the third−party CA, the third−party CA digitally signs the certificate and
sends back the signed certificate via e−mail.
4.
Copy the signed certificate information that you receive back from the CA into a file.
This example names the file CA.pem.
my issue is where i sould copy and paste the CSR information into any CA enrollment tool. i just have done create mykey.pem and myreq.pem in my folder OpenSSL\bin
Please help and Thanks you.
Regards,
Jasa

you have to do more steps using openssl.
before you obtain the third−part certificate, you have to copy that on a notepad text, and you have to obtain an intermediate and root certificate from the company that gives you the certificate.
Then you have to copy and paste on a notepad or gedit:
SSL (the certificate that they give you)
Intermediate (the certificate that you obtain from the company that gives you the certificate)
Root (the certificate that you obtain from the company that gives you the certificate)
name the text file like: allcerts.pem
then... you have to run this commands:
C:\OpenSSL\bin>openssl pkcs12 -export -in allcerts.pem -inkey mykey.pem -out All-certs.p12 -clcerts -passin pass:yourpassword -passout pass:yourpassowrd
C:\OpenSSL\bin>openssl pkcs12 -in All-certs.p12 -out finalcert.pem -passin pass:yourpassword -passout pass:yourpassword
Then you are going to have a file named: finalcert.pem, thats the one you have to update to the WLC. please note that on those lines "yourpassword" is the password you use when you create the certificate and its going to be the same that you have to use for upload to WLC.
Note that you have to use openssl version 0.9.8 because its the only version thats WLC support
If you have doubts please contact me.
Have fun!

Maintain license key for third party product in sap PI

HI,
I have install third party product in SAP PI SLD for an application,
How can i specify the key or license agreement for the third party product.
Where i have to maintain the key for Third party product in SAP PI.
Regards
Niraj

Hi Harish,
Deployed third party product in SAP PI Server which is Web UI(Application)
for initiating the integration process,But when i run the application
Its showing an error. "Error loading license agreement"
Regards
Niraj

No MDB for third party JMS

Just when I getting to like oc4j I ran into this.
It is a beta document for 904 oc4j.
Oracle9iAS Containers for J2EE
Services Guide
Release 2 (9.0.4)
Part No. B10326-01
April 2003
Beta Draft March 21, 2003 11:59 am
Third-Party JMS Providers
This section discusses the following third-party JMS providers and how they
integrate with OC4J using the resource provider interface:
¦WebSphere MQ
¦SonicMQ
¦SwiftMQ
Here are the operations that the resource provider interface supports:
¦Look up queue and topic with
java:comp/resource/providerName/resourceName
¦Send a message in EJB
¦Receive a message synchronously in EJB
The context-scanning resource provider class is a generic resource provider class
that is shipped with OCJ for use with third-party message providers.
Note: Oracle supports only single-phase commit semantics for
resource providers other than OJMS.
Note: OC4J 9.0.4 does not offer MDB support for third-party JMS
providers.
Note: For the OC4J 9.0.4 implementation, MDBs are integrated
with OC4J JMS and OJMS.
Well I need MDB capability with Mqseries, so it looks like
I am going to have to abandon ship with oc4j, and go with
a J2EE server which supports MDB and JMS the way it was intended to, and not only work with the Vendors JMS implementation. I checked this 10.0.4 preview and it is
the same way.
I would be tickled if someone could tell me this is not
the case, but I'm not expecting any answer that would
make an MDB work with Mqseries.

10.1.3 Developer Preview supports MQServies.
You can download the software at http://www.oracle.com/technology/tech/java/oc4j/1013/index.html
Look at the howto at http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-mq-jms/doc/how-to-mq-jms.html
http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-mq-jms/how-to-mq-jms.zip
The earlier releases support MQ Series but not in a transactional way.
-Debu

Plant Determination for Third Party Material as Child Item in Sales Order

Hi All,
We have an issue with the Plant Determination for Third Party Material as Child Item in a Sales Order.
Even when a Delivering Plant is maintained for the child item which is a Third Party Material, the plant of the Parent Item is only populated as the Default plant in the Sales Order
Can someone explain the reason behiind this determination.
P.S.- For all non -Third PartyChild Items (with non-Third Party Item Catefory & Material Type), the Plant is population correctly as per Delivering plant in Material Master.
TIA.
Regards,
Sridhar

Hi,
Thanks everyone for the feedback.I agree with Samir Danish.It is a standard functionality of SAP which does not allow free goods for BOM material.
However, can someone suggest work around to deal with this issue.I mean if any one has been doing any work around for this issue then please let me know.It s becoming critical for me.
Regards,
BM

PO document type for third party PO...?

Hello friends,
My client's requirement is that third party PO should have different document type, say ZTRD?
I tried to configure the same with PR and PO doc types. I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
Please help me to configure the Z doc type for third party PO.
Thanks in Advance,
Pat.

Hi
Please try the following, do not delete the standard settings
1) Create Z document type for PR and assign this document type to relevant Schedule line Category ( CS for example) in SD
2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
Hope it helps.
Thanks/Karthik

PO Creation for third party sales

Hi
We have the scenario Third party sales and High sea sales which is already in use (already configured) , where PR getting generated automatically .
But client requirement is they want the PO to generate automatically by the system the moment i save the sales order .
Where is the setting in the SAP , where system will generate the PO automatically instead of PR
Please suggest

Hi,
Go to VOV7
Select third party item category which u r using in sales order >>> Deatils >>> under transaction flow >>> Tickmark to CREATE PO AUTOMATIC.
If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order.
However u can not create PO directly.
Kapil

Logical Sys Name for Business system in SLD for Third Party

Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
Gowri

Hi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo

Process demand for third party direct shipment

Hello ,
I need help in below given areas. in our rollout client is given statement of work like this.
1)     Demand transfer to vendors
2)     Reminder processing
3)     Process demand for third party direct shipment
Please can you explain me about these area, how it works with example. it is very benificial for us.
Regards
sapman

Hi Sapera,
There can be 3 typse of trading scenarios
1. 3rd party with Shipping notification : Where in u create sales order and create PO against the PR which si triggered in SAles order adn hen MIGO followed by MIRO and Billing. Here Billing to the end customer can be doen before MIRO because the billign quantity considered is based on the goods Receipt( MIGO) quantity. Many a times you might have your personnels or soem mechanisms to cross verify the delivered quanity as some times the vendor might not dispatch the quantiy in the PO. Here the MIGO doen si consumption posting/Non valuated GR as physically it doenot come into your stock and therefore is not shown in our stock. ITem category used in TAS
2. 3rd party without shiiping notfication ; Here MIGO is not done and billig ncan be done only after MIRO as the billing quantity is based on the Invocie receipt quantity in MIRO
3. Bought in items/ Dealer Sales : Here you bring in the materials from the vendor to our depot plant and then dispatch it to the customer . Here PR is geenrated from sales order followed by PO and MIGO. After MIGO you have to do PGI followed by Billing. MIRO doesnot have any impact on the PGI or Billing. Item category used is TAB
But in all the three instancesthe configurational changes happen in schedule line cateogry and the account assignment which is maintiend in item category and for automatic determination of 2 different schedule line categories we need to maintian 2 different item categories alothough item category settings are almost the same.
Hope this was helpful in giving you some insights on the trading processes
Regards,
Nithin

Recommendations for third party LR3 web gallery software

Similar Messages

Maybe you are looking for