Recommendations for Video Capture

I've had my MacBook for about a month now...and am looking to start messing around with some home movies.
Does anyone have any recommendations on what I should buy for a video capture device?
I'm not looking to spend a bunch of money, as I'm just messing around with some home movies and such.
thanks!

This is a bit strange with apple servers today. For some strange reason, there seems to be a 5-10 min. delay in my post on this one thread only ....very weird.
Oh well, I'll post the info again in hope that it sticks ....
You can capture to iMovie which is what I suggest or directly to iDVD6 (via 1 step or magic iDVD). Your choice.

Similar Messages

Recommendations for Video Capture Software?

Hi,
I'm looking for screen/video capture software to record what's on my macbook screen in video format. I've been looking at Camtasia, but wanted to know if there are any other alternatives I should consider as well?
I need something that will record what I do on my macbook screen, as well as let's me annotate and edit what's been recorded. Any recommendations?
Thanks!

This is a bit strange with apple servers today. For some strange reason, there seems to be a 5-10 min. delay in my post on this one thread only ....very weird.
Oh well, I'll post the info again in hope that it sticks ....
You can capture to iMovie which is what I suggest or directly to iDVD6 (via 1 step or magic iDVD). Your choice.

Hardware/software recommendation for video capture prior to edit on home ba

i am a FCP user on a G5. i need to begin to load and initially edit video while traveling and then take that FC project file and load it onto my home based G5 for further work. i am considering a macbook and FC express to accomplish this task.
my questions are:
does it matter that the new macbooks are intel processors and my G5 is not intel based? will i have any compatibility problems with SW/file transfers.
is FC Express the best SW to use for the load and initial edits?
is there a best practice recommendation for what i want to do?
thank you.
dennis
G5 Mac OS X (10.4.9) use FCP HD 5.0.1

FCP will run on a MacBook. It's not support, and the Studio is not supported because of Motion's graphics requirements, but quite a few people are running FCP on basic MacBooks. Just make sure it has enough RAM.

Recommendations for Video capture card

Been capturing video via firewire through a VX2000. Using it as a A/D converter.
I would like to install an internal capture card in a dual G4 running OS 10.4.8.
Suggestions?
Steve

OK Steve, first off no one is making PCI capture cards anymore...an there is no HD card made for PCI at all. PCI-X and PCIe only. Second, that computer cannot handle HD captured via a capture card. HDV, DVCPRO HD...yes (pushing it). XDCAM...maybe (pushing it). Uncompressed HD? Heck no.
Not only do you need the HD capture card, but you need a high speed RAID array..and there isn't one made that interfaces with PCI. You gotta get a new machine. The one you are on will handle SD only.
With the new machine, the cheapest option is the Decklink INTENSITY PRO. This has analog ins and outs, installs in the computer (PCIe only), and runs about $400. COmponent, s-video and composite and HDMI connections only. NO SDI or HD SDI...which are the better connections for high end work.
Then you need an HD monitor...which isn't cheap. And again, the RAID array...
But...all this is getting complicated. What format of HD are you intending to work with in the near future? HDV, or HDCAM? DVCPRO HD? XDCAM? Uncompressed HD? This determines everything.
Yes, video is expensive. HD even more so. DV is cheap...HDV CAN be cheap, but get expensive if you want to do it properly.
Shane

Looking for video capture devices

when I tried to compile a web cam capture program, I have the following Exception:
Looking for video capture devices
No VFW video detected: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
Please,I need ahelp.

Hi I can recommend v4l4j to capture for video streams with linux. I need a library of functions to quick show video from webcam in JFrames and it did it for me.
try it : http://v4l4j.googlecode.com

Computer set up for video capture

I believe there are special setting of the computer for video capture. I have done these in the past but cannot remeber how or find any info. One setting was to send the data form the camcorder straight to the hard disc. Can anyone help me, please ?
johnjep

If you're capturing from a tape-based camcorder, you should capture over FireWire.
For hard drive camcorders, you'll need to use the Media Downloader built into Premiere Elements to get the video files.
Current computers can usually capture with no special set-up. Although Vista can use a bit of tweaking, as you can see if you click on the FAQs listed to the right of this forum.
If you've got a second hard drive, you can get the most efficient capture by capturing to it rather than your C drive.

N95,GPS, Flash in night for video capture

please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???

15-Jul-200705:21 PM
probit wrote:
please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???
1) The N95 currently does NOT offer the facility to use the flash as a light for video capture.
2) I don't understand your question
3) Your GPS should work in Iran, although there may be an issue with the US (to which all GPS satellites belong to) not allowing Iran to use the satellites - not too sure about this bit.
You will need to download Iranian maps (if available) for the N95 - you can find the download page for Nokia Maps here :
http://europe.nokia.com/A4353385
Also if you follow the link below it'll give you more information on how to get your GPS working :
/discussions/board/message?board.id=connectivity&message.id=8921#M8921
Regards,
Edward

Advice Needed for Video Capture Device

Hi,
I'm looking to buy a USB (or Firewire if they exist) video capture device that can take S-Video and composite connections. Could someone recommend me best one under $150 that is compatible with Snow Leopard? Also, and more importantly, does anyone know if it is possible to capture the signal via Quicktime Pro or Final Cut Pro rather than bundled third party software.
Thanks!

I used the predecessor to the Canopus ADVC55 to load VHS tapes into a mac. As I recall I brought the firewire signal into iMovie (could have been Final Cut Pro too, as I had both on the system). Here are the specs: http://www.grassvalley.com/products/advc55 . Also some comments on it at http://www.amazon.com/Hardware-ADVC-55-d-Converter-Ntsc/dp/B000HGVZG0/ref=sr_1_2 ?ie=UTF8&qid=1323954590&sr=8-2 Here's another source to buy it: http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Ana log_to_Digital.html .
They also make an ADVCmini, which I haven't used, which is probably less expensive, with specs at http://www.grassvalley.com/products/advcmini

RecordControl for Video Capture

Hi,
I have encountered problem capturing video using J2ME toolkit, and need help on this area. Thanks!
I have the following sample code from web:
output= new ByteArrayOutputStream();
rc = (RecordControl)player.getControl("RecordControl");
rc.setRecordStream(output)
rc.startRecord();
the problem is nullexception at the setRecordStream line.
Can we actually carry out video capture using J2ME toolkit or need other emulator?
Pls advice, Thanks for helps !

This is a bit strange with apple servers today. For some strange reason, there seems to be a 5-10 min. delay in my post on this one thread only ....very weird.
Oh well, I'll post the info again in hope that it sticks ....
You can capture to iMovie which is what I suggest or directly to iDVD6 (via 1 step or magic iDVD). Your choice.

Apple recommendations for video quality

We are making videos to upload (not stream) on the iPad (and intending to use H.264). The tech specs indicate what the iPad can handle (160kbps, 48kbps, 640x480 pixels, 30 frames per second), but I can't find Apple's recommendations for optimum video.
Any advice?

I took a look at the movies that I have bought through iTunes, all of which play on my G3 iPod Nano. They are all around 127 kbps, but the sizes range from StarTrek at 1280 x 530 to a Pixar short at 640 x 268. No frame rate listed in the metadata.
Dah•veed

Recommendations for hardware capture setup

Hey folks,
I have a question regarding setting up a FCP X system at my work place. Normally this would be a no-brainer because we don't have any special needs... except for one - capturing 5.1 audio along with HD video. I work for a video game developer and we need to capture our games to make demos. The consoles and PCs all output 5.1 through either HDMI or optical.
Do you guy have suggestions of low cost but decent quality hardware to capture into FCP X that fits that criteria? our budget is roughly 10K and we already have the Mac Pro.
Thanks a lot guys!

Exactly my point. We currently don't have a capture solution. The only thing we can do is take out PC version and use Fraps to do what is called a frame buffer dump. It's a brute force attempt at taking images right off the GPU and saving them to a video format. You have no guarantee of frame rate cature. The problem as I mentioned is that we can't use that method for the consoles because we don't access to any of that stuff on them. The consoles have HDMI and component output and optical as audio option.
I'm aware that FCPX doesn't have a method to capture directly, but there are hardware option like AJA devices that capture in codecs supported by FCPX, Apple ProRes for example. My question is basically which of these hardware solutions is best for capturing video and 5.1 audio via HDMI. We need a professional grade solution not something that connects via firewire or USB, those are in no way, shape or form broadcast grade solutions.
This is the device that I was referred to so far as an option. Does anyone have experience with it?
http://www.aja.com/products/kipro/ki-pro/ki-pro-description.php

Seeking Laptop Recommendations For Video Editing On-The-Go (Around $1,000)

Hi there,
I am seeking recommendations for a laptop great for video editing. I am a YouTuber with an on-the-go lifestyle.
Budget is $1,000ish.
I need to be able to physically lock the laptop with one of those holes on the side.
I want to be able to multi-task well by having a variety of programs open at once.
Thanks for the help.

Well that is a tall request Take a look at this factory refurbished starter unit. I acquired a similar refurbished unit just a year ago and upgraded it with more RAM and SSD drives. The upgrade process is extremely simple. You could start with the unmodified unit and as you run into performance problems upgrade gradually. My laptop is now editing three camera timelines of AVCHD 1920 x 1080 with ease. I now have 24 GB of RAM and got rid of the 1 TB 5400 rpm by cloning it to a 128 GB SSD drive and adding a second very good SSD in the available port. Removing one screw gives you full access to do this. Here is a picture of the bottom of my laptop.
Edit, I just checked and it does have a Kensington security slot
You do realize that the only way to do video editing is to have the laptop AC powered.

CS4 MPEG 2 export settings for video captured by sony cybershot dsc-w35

Hi,
I am trying to export a project (which contains video captured by my sony cybershot dsc-w35 digital camera) in MPEG 2 format (not sure if there is a better format I should be using, but I tried to do it in AVI before and the resulting file was way too large), and the resulting exported file always comes out with choppy video. The video capture settings for my cybershot camera (and thus the source video in my project) are:
- VGA (640 x 480)
- framerate: 25 fps
At the outset, I am using DV (only other option is HDV) as capture format, and I selected DV-PAL: Standard: 48 kHz as my Sequence preset. I have no idea if thi is the appropriate preset for me to be using, but it seems logical since its timebase is 25 fps and it says a 4:3 video ratio in the description, and almost every other preset seems to be intended for HD video and higher framrates or ratios, etc.
At the export stage, I select MPEG 2 format, and other than that I really have no idea what settings I should be using. I set the preset to Custom and under the Video section I switch the framerate to 25 and the pixel aspect ratio to 4:3. Everything else I pretty much leave the same.
Can anyone tell me why the export file always comes out choppy? (it is not choppy when I watch it in Premiere itself). I must be either using the wrong preset at the beginning or in the export stage (or both). The VGA capture setting of my camera seems like it might be an issue as none of the presets in Premiere appear to accomodate it. Any help is sincerely appreciated!

Thanks for the prompt response, Hunt.
The spec sheet you referred to is actually for the Sony cybershot dsc-w350, whereas my camera is the sony cybershot dsc-w35. that's probably the reason for the discrepancy. When looking at the properties of the source video I am using it says 25 fps, so does this mean I should be using a PAL preset in the export stage? I see what you mean about using a Desktop (custom) preset for the sequence preset, and for this I set the framerate to 25, frame width to 640 and height to 480 (to match my camera settings), but what should I set the pixel width to?
In the export stage, I select custom preset again, but within this there are lots of options (mostly under the Video tab) I am unsure about. Should I be using PAL instead of NTSC since I'm using a 25 fps framerate? I can also scroll video quality anywhere from 1 to 5, any ideas? I can also choose various pixel aspect ratios here and then there are a bunch of bitrate settings I am totally cluseless about. Also, under the Multiplexer tab, there is an option between constant and variable bitrate types, which should I use? Thanks again

Ethernet disk for video capture

Is it possible to connect/mount an external network disk (LaCie's Ethernet Disk) directly to the ethernet port of an Intel iMac, without the use of an actual network/router? and if so, would this act as a reasonable drive for capturing DV and HDV video?
My plan is to use a 24" iMac as a completely stand alone, budget video editing station that only accessing the internet (via Airport) when requiring updates.

Whilst the theoretical speed of the Gigabit (1000Mbps) Ethernet port on the iMac is about that of the FW800 port I am sure that you will get better performance from a FW800 drive for video transfer due to the overheads involved in packetizing data to transfer over the 'network' to the disk.
FW800 can be had for a very reasonable price.
mrtotes

Any fixes on WebCam Vista Pro for video capture on unlimited recording timing

Hi there
Anyone know is there any fixes on WebCam Vista Pro on video capture for unlimited recording timing till the harddisk fill up?
Help advise
Thanks in Advance

Thanks for the info. I am new to this whole MAC experience. I have been a PC user for over 25 years and I am just now venturing into the MAC world. BTY, I am loving it. Thanks again.
Message was edited by: ScanVid

Recommendations for Video Capture

Similar Messages

Maybe you are looking for