Recommendations;;; Please help me
We would like to build necessary monitors around fast refresh that we are doing for one product.
To start, we have a counter table in database 1 which gets refreshed to database 2 via a dblink from database 1 periodically, every 15 minutes.
we have a materialzed view log table created to capture the incremental in database 1, which helps in fast refresh.
We would like to be sure we get alerted and anticipate of any overlap or taking longer time to refresh. The objetcive is to be proactive.
Could you please share the recommendations to best monitor.
database 1 is in 11gR2 , Enterprise Edition (11.2.0.1)
database 2 is in 11gR2, Standard Edition One (11.2.0.1)
Thanks,
DUPLICATE
do NOT multi-post
need recommendations
Similar Messages
-
Tethering Phone Recommendations - Please help!!!
Hi all,
This is my first post. I am in Afghanistan in an area that has Cell phone service that also provides GPRS internet. This is pretty much as good as it is going to get, but there are always possibilites that this internet system may be upgraded at a later time to 3G or so. This is my only means of communications with my family. I am going to use a cell phone to tether to my laptop to create a connection. I'm hoping for the best - which would be to run Skype voice or video with it - but anything is better than what we have now - which is nothing. I dont need a lot of other bells and whistles on the phone.
The internet system there is GPRS and has a max speed of 115 k. Most of the phones I have looked at are quad band and that would be best as well. In addition, my computer does not have bluetooth so it will have to use a data cable usb type. It should also charge from this cable.
I have to order the phone before I leave this location on thursday as after that I may not have any useful internet for three months.
Please recommend a phone.
must tether to provide internet "phone as modem"
Quadband GPRS max internet speeds up to 115k
charge from usb while connected to laptop to tether via usb
Thank you.Pretty much all Nokia phones do the first 2 on your list.
If you want to be able to charge the phone while it's connected, or at least draw some current from the USB port in order to flatten the battery less quickly, then that limits your choice somewhat. Potential candidates that aren't in the "luxury" range (8800 Arte et al.) are: 6500 classic, N85, N97.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
New Mac Pro buyers recommendation - please help
hello there -
i'm looking to buy a Mac Pro for use as a FCP video editing station. i'm not going to be doing anything too fancy with it, but i want to run FCP Studio 2, and will load it up with 2-4 GB of RAM for sure.
i'm confused by the specs which state :
An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
nowhere does anyone specify what a "Quartz Extreme graphics card" is....
i'm looking at something like this:
Refurbished Mac Pro Quad 2.66GHz Intel Xeon
http://store.apple.com/us/product/FA356LL/A
Two 2.66GHz Dual-Core Intel Xeon processors
1GB (2 x 512MB) memory (667MHz DDR2 fully-buffered DIMM ECC)
250GB Serial ATA 3Gb/s 7200 rpm hard drive
16x SuperDrive (DVD+R DL/DVD±RW/CD-RW)
NVIDIA GeForce 7300 GT graphics with 256MB memory
does that graphics card do what i want it to do?
where you you find a list of what is a compatible FCP graphics card?
thanks
bbbbthat's really good to know you can put in larger drives than is specified by apple. eventually i may be doing some HD. but i know the ropes about RAID and would only put on there capture scratch that i have tape backups for etc.
two more questions:
i'm considering going for the 8-core instead of the Quad-core. do you see much difference in performance with FCP?
is there much need for more than 2GB of RAM? it's been a long time since i bought a new computer....
i'm guessing most of you will answer "if you are going to do any HD editing, then yes" to both of the previous questions
regards
bbb -
Please help! When I restore on my ipad I get an error message of 1604 and I have tried all the recommended steps! Does anyone have the same problem?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
Firefox worked on this computer in the past. Now, Firefox wont start.
1. I deleted everything off this computer including the profile and all files under
C:\Program Files (x86)\Mozilla Firefox\
2. I deleted my profile here:
%APPDATA%\Mozilla\Firefox\Profiles\
3. I uninstalled the program, deleted all cookies, temporary internet files etc. I restarted my computer.
When I reinstalled it, it still doesn't open.
When I ctrl+Alt+del I see the process (not application) is running, but nothing appears on the streen
Please help!!!
win 7, plenty of ram, plenty of disk space, high speed internetTry to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
-
Error Log during logon of RAR 5.3 Portal - please help
Hi Experts,
We are unable to login into the CC portal [GRC RAR 5.3]. The login screen is appearing again and again without logging into the CC portal
Below is the log file which we are getting and we understand that the product is not responding properly to the application
Can somebody please help us in resolving this at the earliest
Thanks in Advance
Best Regagards,
Srihari.K
Date : 12/05/2008
Time : 2:38:16:008
Message : Exception of type com.sap.sql.log.OpenSQLException caught: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?"..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Severity : Error
Category : /System/Database/sql/jdbc/common
Location : com.sap.sql.jdbc.common.CommonPreparedStatement
Application : sap.com/tcwddispwda
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 1666450:/apps/usr/sap/HLG/JC00/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BAF96A51006E0000001F0000265200045D4A46588084
Source Name : com.sap.sql.jdbc.common.CommonPreparedStatement
Argument Objs : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Arguments : com.sap.sql.log.OpenSQLException,Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".,com.sap.sql.log.OpenSQLException: Cannot assign NULL to host variable 1. setNull() can only be used in INSERT and UPDATE statements. The statement is "SELECT MIN("YEARMONTH") "YEARMONTH",MIN("VIOLTYPE") "VIOLTYPE",MIN("VSYSKEY") "VSYSKEY",MIN("ANLTYPE") "ANLTYPE",MIN("USERGROUP") "USERGROUP",SUM("TOTCOUNT") "TOTCOUNT",SUM("RISKLOW") "RISKLOW",SUM("RISKMED") "RISKMED",SUM("RISKHIGH") "RISKHIGH",SUM("RISKCRT") "RISKCRT",SUM("URNONE") "URNONE",SUM("URLOW") "URLOW",SUM("URMED") "URMED",SUM("URHIGH") "URHIGH",SUM("URCRT") "URCRT",SUM("URMIT") "URMIT",MAX("TOTCRTCD") "TOTCRTCD",SUM("CRTCD") "CRTCD",MAX("TOTCRROLE") "TOTCRROLE",SUM("CRROLE") "CRROLE",SUM("TOTUSER") "TOTUSER",MIN("RUNDATE") "RUNDATE" FROM "VIRSA_CC_MGMTTOT" WHERE "YEARMONTH" = ? AND "VIOLTYPE" = ? AND "VSYSKEY" LIKE ? AND "ANLTYPE" = ? AND "USERGROUP" LIKE ?".
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setNull(CommonPreparedStatement.java:303)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:509)
at com.sap.sql.sqlj.runtime.profile.ref.RTStatementJDBCPrepared.setString(RTStatementJDBCPrepared.java:359)
at com.virsa.cc.xsys.mgmreport.dao.sqlj.MGMTotalDAO.getResult(MGMTotalDAO.sqlj:63)
at com.virsa.cc.ui.RARiskVGraph.refreshData(RARiskVGraph.java:476)
at com.virsa.cc.ui.RARiskVGraph.wdDoInit(RARiskVGraph.java:130)
at com.virsa.cc.ui.wdp.InternalRARiskVGraph.wdDoInit(InternalRARiskVGraph.java:191)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Dsr Component : n/a
Dsr Transaction : d2d9c100c2b811dd9eb60003baf96a51
Dsr User :
Indent : 0
Level : 0
Message Code : com.sap.sql_0019
Message Type : 1
Relatives : /System/Database/sql/jdbc/common
Resource Bundlename :
Session : 92
Source : com.sap.sql.jdbc.common.CommonPreparedStatement
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : ac_adminHi,
The shear length of your post is frightening - this would keep many potential replies away !!
What i woudl recommend is --> Open an OSS messgae ! This would resolve your problem !!
Thanks -
Please Help. Photoshop installation failed half way through
Initially I had downloaded the photoshop CC2014 trial once, I paid I wanted the CC version because I need the oil paint function which was taken out on the CC2014 version, so what I did is uninstall the CC2014 which was installed and working and proceeded to install the CC version but midway through installation it kept failing and telling me to restart my computer, I have done that at least half a dozen times, plus I've also tried the following:
> I uninstalled every adobe app I had including CC
> I have used the Adobe Creative Cloud Cleaner tool app
> Have restarted my computer so many times I lost count and I still get the same error, half way through the installation process
> And now the same thing is happening when I try to reinstall illustrator, this is a nightmare!
BTW I'm not running any other software while doing this and have turned off the fire walls
I'm on an Imac OS X version 10.9.5
Please help I've spent so manny hours trying to solve this, it's driving me crazy and need to complete some work in photoshop I have deadline.
Latest log report: 10/11/14 19:54:40:043 | [ERROR] | | OOBE | DE | | | | 128135 | ASU has quit unexpectedly.
they all say the sameTat7 I would recommend reviewing your installation log files for actionable error messages. You can find details on how to locate and interpret your installation logs at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any additional errors you locate to this discussion.
-
Computer freezes -- PLEASE HELP
Each time a new song starts on my iTunes, about 10 seconds into the song my memory usage for iTunes will shoot up from 53,000K to 85,000K and will cause everything I am doing on my computer to freeze up for about 5-10 seconds. Like I said, this happens for each successive song. I have a 13,000+ song library and did not have this problem with iTunes 4.9 -- I recently updated to 5.0.1 and started experiencing this. So, I tried uninstalling 5.0.1 and reinstalling 4.9, but the same problem was now happening there as well. This is NOT a problem with my hardware, it is more than sufficient to support this usage, and happens even when iTunes is the only program running on the computer. PLEASE HELP, it is very annoying to have to stop what I'm doing and wait for 5 seconds each time a new song starts.
Boot from your original Tiger cd and run Disk Utility Repair Disk from there - it can repair directory problems which can't be fixed from normal Disk Utility.
If that doesn't work, an archive and reinstall of Tiger might be best - it's pretty simple and can save weeks of trying to track down and fix an obscure problem. Just make sure you thoroughly backup first. Check Apple's website for instructions http://docs.info.apple.com/article.html?artnum=107120. Disconnect all peripherals while you reinstall.
Once Tiger's reinstalled, download the combo update from here http://www.apple.com/support/downloads/ (Note - don't use Software update for this). Re-attach peripherals one-by-one to see if anything is still upsetting Tiger.
I would then recommend you install third party software Macaroni, http://www.atomicbird.com/ to automate the necessary admin tasks needed to keep OSX in tip-top shape.
2GHz dual G5, 23" panel Mac OS X (10.4.7) -
SO HERE IT IS.
I ALREADY READ MANY STEPS, MANY TIPS ON HOW TO FIX MY PROBLEM IN MY WINDOWS. BUT I REALLY CAN'T FIX IT. I'm not professional in terms of Computer System. But I really want to upgrade my Operating System to Windows 8.1.
I really can't do it.
The window store says that I need to upgrade the pending updates for my applications but when I click install all.
It's just pending. There's nothing happening. There's nothing installed.
So I go to control panel then search the windows update.
There I click the Install Updates. I waited for 4 hours. But there's really nothing happening so I cancelled it.
Then here is what happened after that.
IT SAYS THAT code:80070003 windows update run into a problem then I clicked the "Get help with this error"
Then I run the troubleshooting
And then after that.
the troubleshooting has completed this is what it said.
Problems Found:
Service registration is missing or corrupt
Windows Update error 0x80070057 (2014-08-10-T-02_20_42P)
Problems Installing recent updates
So that's is.
I don't know what to do.
PLEASE HELP ME. :(Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob -
Can't group text or send/receive picture messages! Please Help!
Hell Everyone,
so I just recently switched from my Iphone back to my blackberry for simplicity/practical reasons...I couldn't deal with the iphone anymore. In doing so, I came across a problem. I am not able to send group texts or send/receive mms. Everytime I try to do so, the text has a red 'X' next to it showing that it didn't go through. I am currently with ATT and have tried calling them to resolve it but no one knows.
here are some of the steps I took to resolve it
1. Resetted to Factory Settings - Did not work
2. Made sure all the settings in my text message options is selected properly - Did not work
3. Deactivated iCloud/iMessage on my previous iPhone - Did not work
4. Called ATT and had them make sure BB Data plan was on my plan, and it was - Did not work
Can someone please help?
Thank you,
PogosHi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should re-contact your mobile service provider for formal support...be sure to request their dedicated BB support group. MMS is a specific service level that must be properly enabled on BBs in order to function. Often, the first support group you reach will not understand the proper method for configuring this on BB...but their dedicated BB support group will.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I noticed my iPod changed the date to "January 1970" then it stopped connecting to Wi-Fi after I returned from a Texas to Cozumel, MX cruise. Other devices do connect to Wi-Fi and my iPod does detect the connection but after submitting the password it fails to connect. I've reset my router already twice. I've reseted, updated, and restored my iPod and nothing works. It's an iPod 5. Someone please help me. :/
Does the iOS device connect to other networks? If it does that indicates a problem with your network
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router Done?
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. Not clear if you did this restore
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M. -
PLEASE HELP LOCATE SONGS FROM EXTERNAL HD (Cloud)
First off, I would like to thank ANYONE who can help me out please! I am desperate now for some advice to help me through this, I have spent the last 10 Hours (Not Exaggerating) trying to find a solution to my problem online and reading through countless things I HAVE NOT been able to get an answer to resolve the issue that I am having. Please I beg you to help me! I just wanna call Apple Support so that someone can walk me through this but I am using a Windows and they won't take calls from Windows users (which is kind of lame since I am an Iphone/Ipad/Itunes customer just not on an Apple Computer) and honestly I would even pay money to have this issue fixed already I just don't wanna waste any more time on it!!!
SO, that being said. Here is the most concise explanation I can give you of my troubles!
1. I have both a Laptop and a Desktop. My Laptop has been my primary source for Itunes for the passed 8 years, however, it is old and I want to start using my Desktop for Itunes from now on..also, I NEED to free up space on my Laptop so that I can back up my Iphone 5 which has a broken screen, but that's another story!
2. I Purchased something called a "WD MY CLOUD" Which is basically a personal ICloud that has 2TB of external HD Space on it. I hooked up my WDMyCloud and configured it, got it working perfectly, and I began the multiple hour long process to transfer my ITUNES Folder from my Laptop over to the WDMyCloud.
3. All of the files and songs were successfully transferred from my Laptop to the WDMyCloud.
4. I Installed Itunes onto my Desktop.
5. I shift+clicked Itunes and chose the Itunes Library from my WDMyCloud. I believe the file is found in: \\WDMYCLOUD\Oliver\iTunes\iTunes Library. (And that is the .itl)
6. When I have Itunes open, I go to preferences, and I change the MEDIA Folder to the iTunes Music Folder located on my WDMyCloud. I believe the file is found as: \\WDMYCLOUD\Oliver\Itunes\iTunes Music. (It does have all of my songs in there on the WDMyCloud in Folders by Album or however itunes had it organized)
7. Now I am staring at my Itunes Playlists and All of my Songs are there, however, whenever I try to Play ANY Song on there I receive this error: "The song "xx" could not be used because the original file could not be found. Would you like to Locate it?" (And no, I would not like to manually locate over 3,000 songs)
Also, every single Song has an "!" Exclamation mark next to it.
8. If I use "Get Info" about the track to see where Itunes is looking for the track, I will show you an example now here to what it says:
"file://localhost/C:/Users/Oliver/Downloads/Firebeatz - Gangster (Original Mix).mp3"
(Now I do realize that this is incorrect, it should be looking for the songs in my WDMyCloud, that path above is from my Laptop's Downloads Folder and I have no idea how to fix this.)
9. I have also tried using the "FindTracks.vbs" on my \\WDMYCLOUD\Oliver\Itunes\iTunes Music Folder and this did nothing, at all.
10. I have opened the Itunes Library XML that is saved onto my WDMyCloud from my Laptop, and it shows the script as:
<plist version="1.0"><dict><key>Major Version</key><integer>1</integer><key>Minor Version</key><integer>1</integer><key>Date</key><date>2014-05-24T16:40:35Z</date><key>Application Version</key><string>11.2</string><key>Features</key><integer>5</integer><key>Show Content Ratings</key><true/><key>Music Folder</key><string>file://localhost//WDMYCLOUD/Oliver/Itunes/iTunes%20Music</string><key>Library Persistent ID</key><string>5C3728163E81BB1D</string><key>Tracks</key>
<p
^^ Now I'm not really sure how clumped up that is going to look once I post cuz when I tried copy/pasting it from the XML on to here it came out looking super weird, but as you can see the key thing there is that the file it says it's looking in is the Itunes Music file in my WDMyCloud. So I don't know what could be wrong with the XML script path if there is anything wrong with it at all. The rest of the XML is super super long list of all my tracks and albums an such which is obviously unimportant to this matter. But maybe this can help figure out my problem.
Anyway, that's about as far as I was able to get after 10 hours of research, and like I said, still no solution. I'm stuck! Please please please help me figure this out! One of the biggest reasons I purchased this WDMyCloud was to use it as a consistent Itunes mediator between my devices and I absolutely MUST free up space on my Laptop ASAP and this is the only way! Thank you so much for your help in advance!!See Make a split library portable for some general advice on making a working library portable. It should be less hassle than fixing a broken one.
Since the library works perfectly on the laptop I would suggest you start over and do it like this;
1. Create a new iTunes folder in the root of the external as \\WDMYCLOUD\iTunes (capitalised as shown please, just to appease my OCD)
2. Copy into it the following items from C:\Users\Oliver\Music\iTunes
Album Artwork
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
sentinel
3. Shift-start iTunes and open the library at \\WDMYCLOUD\iTunes\iTunes Library.itl
4. Under Edit > Preferences > Advanced change the media folder to \\WDMYCLOUD\iTunes\iTunes Media (again capitalised as shown please)
5. Use File > Library > Organize Library. Tick both boxes, or the one that isn't greyed out, then click OK.
iTunes will gather in copies of all your media files, putting them into the correct locations so that the library is in the modern layout, and able to be moved from one machine to another.
I'd recommend you clone the entire iTunes folder to another drive (see this backup tip) before you think about cleaning the originals.
If your library is large then having the library files on a network share will slow things down as the database has to be written out almost any time you do anything with your library. Once you've connected the library to the new computer and had it opened and working you can copy the library files and Album Artwork folder into the local C:\Users\Oliver\Music\iTunes folder (deleteing what is already there first) then shift-start-iTunes and connect to C:\Users\Oliver\Music\iTunes\iTunes Library.itl. If/when you want to move the library to a different drive/computer copy the files back out to the drive and access the library there at lease once before the move.
tt2 -
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!
Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/
Maybe you are looking for
-
my mac book was refused by the apple service center as the mother board was crashed , pls help me what to do
-
Cannot move the pages from one document to another
Hi, I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me
-
Tools for validate HTML and CSS Error in DW?
Hello Guys, Want to know any addon or menu tool in Dreamweaver to validate HTML and CSS error. Because every time i have to check in w3c validation. If DW having in this options it wouldbe great to develop website with out error. Please let me know y
-
How to get price list line id for service contract line(subline)
Does some one know how to find a price list line id for service contracts line (sub line)? There is actually a column in table okc_k_lines_b which is called price_list_line_id, but it looks like it is never used (all columns values are NULL). I have
-
How much will GPU upgrade for Dual 1.25 G4 FW800 help HD rendering times
--"Oh great, not another 'I have an ancient Mac' thread, time to join the 21st century!" Please hear me out. I don't have a lot of money. Any money I have needs to go to video/photography needs since that is my job. If I bought a proper editing stati