Recommendations required on using UC-500

Dear All,
I am new to Cisco UC-500 and never have configured the device previously. I have a situation where I am stuck with a smart building IT technician who is providing us with 1 MB internet link and ISDN service through a 4-core fiber optic cable. The IT technician is suggesting me to have the following setup:
â¢Building data center has Cisco Catalyst 6500 that links to vertical fiber using SFP connectors.
â¢He is suggesting a switch which should be equipped with SFP ports where the fiber uplink will be terminated using the SFP connectors.
â¢For internet he is suggesting to use Cisco 871 router and as he said, no other router can work in the building.
â¢For telephony services he is suggesting to purchase a PBX system from himself, which is an additional cost above to the services.
I want to know instead of going with the plan provided by the building technician, can I use UC-500 and have all the data and voice connectivity. It can work as the router as well as a switch. Only thing I want know is how I will terminate the fiber into UTP from the fiber patch panel to UC-500, as it does not contain fiber uplink ports. I mean can I use GBIC connectors. For telephony services, I believe I can use SIP trunk.
Please help me if my idea of using UC-500 is doable for providing voice and data connectivity.
Thank you.

Yes, you are right that I need a professional to perform the whole job, as I also have to plan for the data security because of my traffic passing through the building switches. The building technicians are pushing me into the corner and not allowing anything to add without their permissions. Posting here was to get a general idea how things will work before getting anything in hand.
Thanks anyway and I really appreciate your help.

Similar Messages

Can anyone recommend easy to use, cheap, storyboarding software. Thanks.

Can anyone recommend easy to use, cheap, storyboarding software. Thanks.

Actually, the software I've seen that does this is pretty cumbersome, and since we require a storyboard at the school I teach a class or two at, the students I teach have tried many... they still end up drawing them; they say it's a lot easier.
However http://www.storyboardartist.com/artist.html seems to be the most popular. http://www.atomiclearning.com/storyboardpro has a freebie... if you type Storyboard Software in google... ya get a pile of them. might look for some demos?
HTH
Jerry

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to determine the JDK version required to use a jar?

Hi all.
I am using a hosted server that uses JDK 1.4.2 and I cannot upgrade the VM. I have been finding it extremely difficult to install web applications on this server since I find that after installing the app, the web server complains the bytecode used in the jar is newer than the VM can understand (or it complains that the app uses JEE servlet or JSP methods it cannot find).
To compound the problem, only about 25% of the sites I've visited that provide jars for download mention the minumum JDK version required to use them. (Some do not mention any system requirements at all besides 'requires Java and a Java application server').
Do any of you know of any tools that can analyze a jar and determine the bytecode version it uses?
(Another helpful tool would be one that can determine the minimum JEE APIs required to run a web app..., but that's probably wishful thinking :)).
Thanks for your help.
Michael N. Christoff

The major/minor version of the class file is the way to go.
Also, it's not necessary to write a separate program to get to those. javap prints them out when being passed the -v flag.
Note, however that "JDK version" is not a correct term, as I can create 1.4-compatible class files with a Java 6 JDK (by passing the -target flag to javac). Those won't look any different than .class files written with a 1.4 JDK.

Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.

Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.
In our organisation, development team is asking to install office 2013 in SharePoint 2013 server to use different services, where as architecture team not allowing for the same. I need to provide proper justification for installing office 2013 in SharePoint
2013 server. Please provide me the correct solution for the same.

No, you do not need to install Office on the SharePoint server to utilize the Excel Services. Office should not be installed on the SharePoint server.
Do they need Office Web Apps? Are they looking to have the capability to edit documents in the browser maybe? Or have document preview on search? Office Web Apps would be required for this, but this is a different product than Office.
Brandon Atkinson
Blog: http://sharepointbrandon.com

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

Hi,
the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
Is it possible. if so, can someone kind enough to point to me right directions?
Thanks in advance.

Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

Specific part number of decription/name of adapter required to use my iPad Air to my PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

Specific part number or decription/name of adapter required to use my iPad Air to a PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

I think you need this.

How to solve error c1190 : MFC requires to use Winsock2.h ?

in the name of allah
hi everyone
i work with visual C++ 2008 and i'm a project that contains the c and c++ code together.
the project worked correctly but when i add a .cpp and a .h file to the project, the project
errors the c1189 : MFC requires to use winsock2.h
look the codes in the .cpp and .h files are correctly because when i add these files to another mfc project will work,
but when add to my project this error will happen.
can you tell me what the problem is?
first part of the my .h file is like below :
#pragma once
#ifdef _WINDOWS_
#undef _WINDOWS_
#endif
#include <Afx.h>
#include <afxwin.h>
#include <atlimage.h>
#include <math.h>
in addition i need to use the CWnd and CString and CImage ,... Classes in my project, because of this include the afxwin.h(for CWnd) and atlimage.h(for CImage) and ....
so i have to do these, don't i?
remaining part of .h file is :
class Object{
public:
 CImage Image;
 short int x,y;
class Theme : public CWnd{
private:
protected:
 virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support
public:
 CWnd *Parent;
 CPoint cursor;
 bool drag;
 CString path,imagepath;
 char DialogMove;//0==top to center - 1==center to top - 2==center to down - 3==down to center
 char code,sb;//code = 0=main page - sb=show button=1=ascedung,-1=desceding;
 short int iimage,bstart,bend,//i = index of images-b = index of buttons
 ib;//ib=index of button for clicking and do code
 short int w, h,D;
 float ani_p, ani_max;
 bool ani,mousec;
 CRect WRect,rdesktop;
 CDC *cdc;
 short int lani;
 HWND hwndani;
 Object *Image;
 CRect *Rect;
 bool *BEnable;//enable of buttons-1 = enable
 unsigned char ButtonCount,ImageCount,SysButtonCount;
 bool Transparent;
 int EndMsg;//0=WM_CLOSE 1=PostMessage(IDOK)
 void GotoPage(unsigned char PageNo,unsigned char BStart,unsigned char BEnd);
 void ClearRect(short i,short j,COLORREF color);
 bool IsIn(CPoint point,CRect rect);
 bool IsInRect(CPoint point,CRect rect,CRect Rectangle);
 void Center2Top(int);
 void Top2Center();
 void Down2Center();
 void Center2Down();
 bool AddImage(unsigned char Index,CString ImagePath,unsigned short int X,short int Y);
 void AddButton(unsigned char Index,CRect rectangle,bool enable);
 void DrawImages(unsigned char alpha,int IImage);
 //Theme(unsigned char imagecount,unsigned char buttoncount,unsigned char sysbuttoncount);
 void Init(unsigned char imagecount,unsigned char buttoncount,unsigned char sysbuttoncount);
 ~Theme(void);
 bool CreateTheme(CRect rect,CWnd *parent,unsigned short int W,unsigned short int H,bool transparent);
 afx_msg void OnPaint();
 afx_msg void OnTimer(UINT_PTR nIDEvent);
 afx_msg void OnLButtonDown(UINT nFlags, CPoint point);
 afx_msg void OnLButtonUp(UINT nFlags, CPoint point);
 DECLARE_MESSAGE_MAP()
after that
in my .cpp file i wrote the body of functions.
so where the problem is?
thanks alot
thanks

How did you created your solution is it a MFC app or Win32 App . make sure that From Project Properties Use of MFC is set to Use MFC in a Shared Dll.
Thanks
Rupesh Shukla

An update is required to use Folio Builder. Please click here to download the Folio Producer tools.

Hello,
I'm using CS 5.5, Mac OS 10.8.4. I've spent the last two nights trying to figure this out but I am really stuck this time... I think the issue I'm having is similar to IDEAMAN1 but I got lost on his advice after trying some stuff out, so help would be greatly appreciated!! (I'm only medium-level tech savvy...)
Trying to create my first epublication. Downloaded FolioPanel v26 and installed it, then FolioProducerTools v27 and installed it. Realised I had stuffed it up so uninstalled both using the uninstaller. Re-downloaded FolioProducerTools v27, FoiioPanel v27 and installed in that order and popup said the updates were ready to go. Opened InDesign and folio builder panel said "An update is required to use Folio Builder. Please click here to download the Folio Producer tools.". The link brought me to http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Macintosh which is where I downloaded the original files anyway.
So I've tried uninstalling, restarting the computer, trashed preferences, closed CS5.5ServiceManager, reinstalling heaps of times and not sure what I should try next. Please help!! Thanks!!!!

That notification is often a bug.
I get it regularly when I launch InDesing while connected to my Thunderbolt Display.
If I disconnect my Macbook from the Display, relaunch InDesign it works fine - reconnecting to Thunderbolt display after this also still allows the Folio Producer tools to load properly.

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

What is the basic requirement to use SIPServlet

Hello Friends,
I learnt SIPServlet through bea.com API documentation. I would like to develop a small application using SIPServlet, please tell me what is the basic requirements to use SIPServlet. How i can get the library for SIP Servlet. Is there any special software support need to execute SIP Servlet.
Pls let me know
Thanks in advance....
Regards,
Kayal

Hi BSB
I would like to know what is the basic requirement to learn EP (Development)?
You should aware of ERP and business processes to start learning EP.
Is Java required? If so, is it J2EE and which version of it?
Java knowledge like jsps,corejava...it will be good..If you know well,you can play with webdynpro java.
Also what else, apart from this I should know to become a successful consultant in EP (seen enough of ABAP
Webdynpro ABAP suits for you exactly for developing portal applications.
Koti Reddy

Is power required to use HDMI?

is the AC power adapter required to use the HDMI port on Macbook pro?

Not for the MBP but the display will have to have its own power. Battery run time will be short though.
Ciao

Is the AirPort (or Extreme) Required to Use the AirPort Express?

Hey. I went to my friend's house and he started telling me about his AirPort Express. I thought that was exactly what I needed! So I asked him "Is the AirPort or Time Capsule required to use it?" He said that he wasn't sure. So I deiced to go here to ask that question. So...

The airport express is one of the most unfriendly of Apples devices I've encountered in terms of setup and troubleshooting. If your son took it to College, he most likely reconfigured it while he was there (so it will no longer be configured for your home network).
I would suggest connecting you express to your extreme via the ethernet port (so connect a network cable between the two), you will then be able to see the express when you launch the airport configuration tool (Airport Utility) on your computer. From here you will be able to reconfigure the express to connect to your network again. At which point you can physically disconnect the express and resume wireless.
Essentially you need to start again from the beginning! Heres a guide which might help, let us know how you get on:
http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

"pen pressure requires the use of a pressure sensitive tablet" in WINDOWS 8.1

old problem but different system
"control by pen pressure requires the use of a pressure sensitive tablet"
I have a problem with it. There is problem when i using my Intuos pro or Cintiq 22 and my version of photoshop is CC.
Can somebody help me with this? hope for some simple solution ; )

If I recall correctly I solved this problem by things I found on the internet. However this is for Windows 7 and it has been a long time ago...
Don't know if it is still appropriate but here goes:
Windows Prof:
Run “gpedit.msc” (click start, in the box closest to the button type “gpedit.msc” without quotes)
Click User Configuration, then drop down Administrative Templates, then drop down Windows Components, then drop down Tablet PC. Finally click “Cursors”
Now double-click Turn off pen feedback. Click the radio button “enable” and click ok.
Windows Home:
circle1
Press the windows key
type "pen and touch" and press enter
In the window that appears, left-click the entry "Press and hold" and click "settings".
Uncheck "Enable press and hold for right-clicking".
Click OK on both windows to close them
circle2
Press the windows key
type "computer management" and press enter
In the window that opens, Double click "Services and Applications" in the centre column
Double click "Services" in the centre column
Scroll down and double click "Tablet PC Input Service"
Find the "Startup type:" dropdown box and change it to "Disabled".
Click OK, then close the Computer Management window
Restart your PC
After your PC loads up again, one of two things should happen: either your tablet works happily and circle-free, or it doesn't work at all. If it doesn't work at all, you now need to download and install the proper driver for it (to replace the Microsoft one that you just disabled). If you use a wacom, you can find the driver for your tablet here.

Recommendations required on using UC-500

Similar Messages

Maybe you are looking for