Recommended and supported Hyper-v Server configurations

I am looking for a document that will give me some suggested Hyper-v supported and recommended server configuration. Recently our company rolled out two Hyper-V servers. The host system is configured to be the Domain Controller.
One server was configured to be a Host Server Domain Controller and a virtual server Exchange server. The Exchange server failed three times. The host domain Controller had been put into services and was active. I finally called Microsoft
and was told this would not a supported or recommended configuration and it would continue to fail. The technical help I had was very good and he pointed me in the right direction to building it directly on the domain controller. Since the Exchange
server had already been built and the scheme to the domain controller had been extended this was horrendous but it worked. "Thank you Microsoft technical team."
The second Hyper-V server is setup the same the host server is the DC. The current virtual server is a SQL server. This seems to be working. We had some issues at first with network connections but I made some DNS entries and it seems to be stable
now. This system is to have an Exchange host added to it and I'm worried that it will have the same issues as the first server. I would like to add it directly to the DC as I finally did the first time but I'm worried it will make the SQL server
fail.
This is currently in a production environment? Does anyone have any suggestion or can you point me to a good tech document that discusses configurations?
Thank you.
Bonnie Whalon

Hi Sir,
>>I would like to add it directly to the DC as I finally did the first time but I'm worried it will make the SQL server fail.
As far as I know , install exchagne on a DC is not recommended (I know it should work).
As to hyper-v serve , it is still not recommended to enable other role on hyper-v host .
I would suggest you to create two VMs , one is DC , other one works as exchange server (If it is possible please build another DC VM for redundant and backup them regularly ) .
Virtualize exchange please refer to following article :
http://blogs.msdn.com/b/virtual_pc_guy/archive/2013/10/07/virtualizing-exchange-on-hyper-v.aspx
Virtualize DC please refer to :
https://technet.microsoft.com/en-us/library/d2cae85b-41ac-497f-8cd1-5fbaa6740ffe(v=ws.10)#operational_considerations_for_virtualized_domain_controllers
https://technet.microsoft.com/en-us/library/hh831734.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

SQL Server Configuration Manager snap in not getting created by Microsoft Manager Console

I just installed SQL Server 2008 Express with Advanced Services. I want to enable FILESTREAM so I can install the AdventureWorks sample database. The instructions at this page: http://msdn.microsoft.com/en-us/library/cc645923.aspx say:
On the Start menu, point to All Programs, point to Microsoft SQL Server 2008, point to Configuration Tools, and then click SQL Server Configuration Manager.
When I open SQL Server Configuration Manager I get an error message: "MMC could not create the snap in, the snap in might not have been installed correctly. Name: SQL Server Configuration Manager." Then it gives me a CLSID.
On this page: http://msdn.microsoft.com/en-us/library/ms174212.aspx it says: "Microsoft Management Console (mmc.exe) uses the SQLServerManager10.msc file in the Windows System32 folder to open SQL Server Configuration Manager."
I looked in the System32 folder and, sure enough, the file SQLServerManager10.msc is in there. It's XML inside the file.
Please help. I really need to get this SQL Server Configuration Manager working so I can enable FILESTREAM data and install the database. I appreciate any help you can give.
--goldenthroat

I'd try this first;
Go to the Run from the Start menu and type mmc and press enter to open an empty console. Under the File menu select "Add/Remove Snap-in". Click "Add" under Console Root and select the "Microsoft SQL Enterprise Manager" snap-in. Close windows until you are back to the mmc, and you can rename the "console1.msc" to default name which is "SQL Server Enterprise Manager.MSC" and save it under C:\Program Files\Microsoft SQL Server\80\Tools\Binn (Default location of SQL Server 2000) - Obviously you want your 2008 installation folder and unfortunately I don't have it so I couldn't point you to it... http://weblogs.sqlteam.com/

Questions regardin "Oracle Database does not support Hyper-V and "

Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
1 - Can you give me some details about what is not supported of the Hyper-V environment?
2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
2 - There are know issue about curruption of datafile using snapshoting,
Thanks in advance.

Hello.
Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
==Quote ==
"Oracle Database is certified with the following Windows Server 2008 editions:
* Windows Server 2008 Standard (x86 and x64)
Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
==/Quote==
Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
Thanks for your advice.
Jakub

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

[Forum FAQ] WSUS Configuration Manager failed to subscribe to update categories and classifications on WSUS Server

Symptom:
You might see an error in Software Update Point Status Message when you run software updates synchronization. (Figure 1)
WSUS Configuration Manager failed to subscribe to update categories and classifications to WSUS Server “Server Name”
Figure 1
When you check the WCM.log, WSUSCtrl.log and wsyncmgr.log. There is an error in WCM.log-“Category Product:6d76a2a5-81fe-4829-b268-6eb307e40ef3 (Windows 7 Language Packs) not found
on WSUS”. (Figure 2)
WCM.log:
Figure 2
Cause:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise. The Windows 7 language packs can be installed only from the Optional
Updates section in Windows Update. However, these language packs are not available on the Microsoft Windows Server Update Services (WSUS) server or through the Microsoft Download Center.
For more information, please review the link below:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise
http://support.microsoft.com/kb/2534462/he
Resolution:
Go to Administration -> Overview -> Site Configuration -> Sites -> Right-click CAS -> Configure Site Components -> SUP Products tab, uncheck “Windows 7 Language
Packs”, then sync again. (Figure 3)
Figure 3
After Sync successfully, the “Windows 7 Language Packs” option disappeared. (Figure 4)
Figure 4
Alternative:
About installing Windows 7 language packs, you could use SCCM 2012 Package feature (download manually) or Windows Update.
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I managed to fix my issue by coping the Client, ClientUpgrade, and Scripts from the files from SCCM install discs folder SMSSETUP to c:\program files\Microsoft Configuration Manager folder. I noticed that some of the files in the scripts
folder was missing and I copied the other folders over because I felt that maybe my local copy of the Client installer where missing some key files as well. Once I did that and disabled software update push, restarted the wsus computer, and re-enabled
the software update push it was able to publish the client and start installing it that way.
I thing the initial log messages where pointing me in the wrong direction for a few hours because I was thinking it was permissions as well and kept trying to figure that out but in the end I do not believe any of that was the reason I was receiving the
same error as you where.

OS X 10.4.11 Server - configured name and reverse DNS do not match / DNS

Hi all,
I have looked for similar posts but all seem to have different scenarios, hoping to get an answer from someone more experienced than myself before I do anything silly.
Help much appreciated!
Scenario:
We run a 10.4.11 OS X Server on an XServe, hosted at an ISP. ISP provides all DNS services, incl. the reversed DNS entry.
I am currently only running the following services (based on the display in ServerAdmin):
AFP
Firewall
iChat
Mail
QuickTimeStreaming
Web
All others (incl. DNS) are grayed out. (As ISP instructed us not to add a DNS service on our box, that's "normal" according to my experiences with dedicated /co-location server hosting).
We never used changeip after the initial setup, meaning the server's
Current Hostname = somename.local and
DNS Hostname = mail.ourdomainname.net
So in system.log I find this re-occuring entry:
Jul 8 11:41:22 somename servermgrd: servermgr_dns: configured name and reverse DNS name do not match (somename.local != mail.ourdomainname.net), various services may not function properly - use changeip to repair and/or correct DNS
Finally, my question:
As Mail and Web services etc. are currently running OK from what I can tell,
1) do I HAVE to change this at all?
2) Would it be much better / why?
3) Could I change this using the following command
(111.11.111.1 indicating the server's IP address)
changeip 111.11.111.1 111.11.111.1 somename.local mail.ourdomainname.net
4) without running a DNS server on the machine, i.e. DNS service is not required for this to work?
5) obviously I want to be able to use Server Admin after I issue this command...
6) can I fall back easily in case this would screw it up, or is there no risk whatsoever doing this in my case?
THANK YOU so much for any help!

Hi Jonas
If port 443 is already being used on the same box as KMS then it will complain and probably not start the service? I've seen this with LDAP port 636. This is when Kerio is installed on a server configured as an OD Master. Clearly the port can't be used by both servers.
It might be easier to change the port your sites are currently using to something else? Although don't do anything yet. Pose the question to Kerio Support and see what advice they offer.
Yes moving the mail to a local folder on the mail client will do it.
Is Kerio going on the same box? If its a different box (presumably different IP address?) Then what you can do is to port forward to the new server's IP address instead of disabling it. This way while you are bringing the new server on line users can still send mail right up until the time you give instructions on changing their inbound/outbound mail server details. Of course they won't be able to receive but if you time it right they may not even get an error message? Depends on what their schedules are.
If it was me I would choose IMAP every time. As the mail admin you have full control and a central location for easy backup. KMS has a built in archiving feature that makes this a simple process. This is an easier option than going round individual client machines and making sure mail held locally in POP accounts are backed up. Besides there is always someone who falls through the loop and I'm not taking into account drive failures. It makes good sense anyway as there is talk of legislation being introduced to make this a requirement for businesses who run their own mail servers. This is certainly true for certain parts of the US and what usually happens there is generally taken up in the UK and most parts of Europe.
Kerio's WebMail Client means users don't even have to have their own computer. Just as long as they have access to one that has access to the internet they can send/receive mail. No need for dedicated mail applications such as Apple Mail, Thunderbird, Entourage etc. How mail is uses remains consistent for all users.
Yes. I did this not so long ago with Leopard's built in Mail Server. I sent an e-mail defining a time when no inbound mail would be received. Disabled port forwarding for SMTP port 25 and approx 30 minutes after that another mail stating no outbound mail should be sent. Once everything was swopped over (we were changing from a G4 10.4 server to a G5 10.5 Server) port 25 was enabled, new server brought online and everyone was mailing again with no appreciable downtime.
These boxes were to have the same IP address hence the slightly different approach.
Does this help?
Tony

DNS server configuration and behaivour

Hi all,
I'm looking for detail explanations which can explain how Mac OS X 10.6 *DNS client* works and may be configured.
According to http://discussions.apple.com/thread.jspa?threadID=2227251 nothing is not guaranteed like order and failover.
According to http://support.apple.com/kb/HT4030 failover will take affect when DNS server returns with SERV_FAIL (0x2) error code. What about NXDOMAIN (0x3) error code (which is more interesting scenario)?
What I'm looking for DNS client?
I'm looking for several DNS servers configuration which allow to split DNS domains for several areas. This, for example, may be very useful for VPN connections when VPN DNS server will resolve internal resource and another server (configured before VPN tunnel established) will resolve external resources.
Is there any possible configuration to achieve this requirement for Mac OS?
Thanks in advance,
Oleg.

Thanks Felix for quick response.
In your scenario:
1. You configured to different DNS servers and probably only one of them replied to DNS queries. And this is OK.
2. When non valid IP configured means that DNS server will not reply to DNS query and than failover will query the second DNS server in the list. And this is also OK.
I'm looking 2 different DNS servers configuration when one of them will reply to different domains. For example:
First server will reply to *.mycompany.com.
The second one will reply to any query except mycompany.com domain(since it is not published).
Thanks again,
Oleg.

SOA suite: configure a new oc4j container, licensing and support

Hi
We have a SOA suite installation (10.1.3.4).
Default installation is containing a OC4J_SOA running the esb, bpel etc.
Now we have a java ear (java web service), and would like to deploy this to a dedicated oc4j container.
So we want to configure a new oc4j instance named oc4j_jws.
Actually, we have already done this, and it is looking good.
Now I only want to make sure the configuration of a new oc4j container is not violating any licensing and support agreements.
We have soa suite license.
I believe a soa suite license allows for configuration of additional oc4j containers.

The adding of oc4j instances is at least well documented within the Oracle Application Server Administrator's Guide:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28940/reconfig.htm

2 Hyper-V Servers with Failover Cluster and a single File Server and .VHDs stored on a SMB 3 Share

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version
You can do what you want to do just fine. Hyper-V / Windows Server 2012 R2 can use SMB 3.0 share instead of a block storage (iSCSI/FC/etc). See:
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
There would be no shared disk and no CSV just SMB 3.0 folder both hypervisor hosts would have access to. Much simplier to use. See:
Hyper-V recommends SMB or CSV ?
http://social.technet.microsoft.com/Forums/en-US/d6e06d59-bef3-42ba-82f1-5043713b5552/hyperv-recommends-smb-or-csv-
You'll have however a limited solution as your single physical server being a file server would be a single point of failure.
You can use Storage Spaces just fine but you cannot use Clustered Storage Spaces as in this case you'll have to take away your SAS spindles from your R720 box and mount them into SAS JBOD (make sure it's certified). So you get rid of an active components
(CPU, RAM) and keep more robust all-passive SAS JBOD as your physical shared storage. Better then a single Windows-running server but for a true fault tolerance you'll have to have 3 SAS JBODs. Not exactly cheap :) See:
Deploy Clustered Storage Spaces
http://technet.microsoft.com/en-us/library/jj822937.aspx
Storage Spaces,
JBODs, and Failover Clustering – A Recipe for Cost-Effective, Highly Available Storage
http://blogs.technet.com/b/storageserver/archive/2013/10/19/storage-spaces-jbods-and-failover-clustering-a-recipe-for-cost-effective-highly-available-storage.aspx
Using
Storage Spaces for Storage Subsystem Performance
http://msdn.microsoft.com/en-us/library/windows/hardware/dn567634.aspx#enclosure
Storage
Spaces FAQ
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Alternative way would be using Virtual SAN similar to VMware VSAN in this case you can get rid of a physical shared storage @ all and use cheap high capacity SATA spindles (and SATA SSDs!) instead of an expensive SAS.
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?

Hi.
I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
If you can provide for all the versions that would be great.
-Thanks
- Ajay Chanana

Hi,
You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
For more detailed information, please refer to the link below:
FAQ Week for NLB: Tuesday
Best regards,
Susie

Does GT60-ONC support Hyper-V (Windows Server 2012)??

Does GT60-ONC support Hyper-V (Windows Server 2012)??
I own GT60-ONC bought in Thailand.
I remove windows 8 and install Windows Server 2012.
I want to install Hyper-V feature.
But I cannot see any option to enable virtualization from BIOS.
my current BIOS info.. is
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Tue 04/29/2014 at 11:50:02.71
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.10C
BIOS Date: 4/26/2012
EC-FW Version:
please help .........
///

You are using Hyper-V server and not Hyper-V on Windows Sever.
Hyper-V server is free, but it only includes the Hypervisor and no GUI (Only for managing Hyper-V)
what's your physical machine OS ?
If it's Windows 8 or 8.1 then you can enable the Hyper-V management tools (Programs and features, Turn On/off Windows Features, Hyper-V, Hyper-V management tools). Then open the Hyper-V console and connect to your Hyper-V server.
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

Windows Server 2012 High Memory Utilization(Three Hyper-V Instance Configure in this Server For Lync)

Hello There,
Issue: High Memory Utilization in Below Scenario. Pl. See the below configuration of Win 12 Server
Pl. see for committed memory bytes . m little bit confused that about committed memory
OS: Windows Server 2012
Memory: Total 24 GB Free:1.3 GB Committed:27.6 GB
App Configure: Three Hyper V Instances Configure For Lync Server 2013
Pls provide me solution on this issue

Virtual memory system. Committed memory is the physical memory for which space has been reserved in the disk paging file. So, you are paging, which is quite common in virtual memory systems.
On a completely different topic. Lync is an application that works best on real cores. Most systems are configured by default to use hyperthreading. Hyperthreading increases the logical processor count on a system and logical processors
are treated equally. Since a hyperthread 'core' (logical processor) performs at a small fraction of a real core (logical processor), if you are running VMs that work best with real cores, it is best to change your BIOS on the Hyper-V host to disable
hyperthreading, sometimes called simultaneous multithreading (SMT).
. : | : . : | : . tim

Failed to connect to the remote Admin Server on host "...." and port "7001" Please, check configuration

Hello friends,
I have two servers S1 and S2
I installed on S1 Foundation, OHS, CALC on S2 I install EAS, APS, FR, however during the EAS or APS configuration. These fail to deploy in Weblogic.
I have this message.
Now, when do I start startWebLogic, I do not have this message but the config is failed.
Here is the config logs. someone an idea.
[2013-10-02T10:55:49.922+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
[2013-10-02T10:55:49.922+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
[2013-10-02T10:55:50.250+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.WeblogicNonApiHelper] trace: EPMSystem
[2013-10-02T10:55:50.454+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
[2013-10-02T10:55:50.454+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
[2013-10-02T10:55:50.516+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.DeploymentApiAdapter] trace: Performing deploy...
[2013-10-02T10:55:50.516+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.DeploymentApiAdapter] trace: Deploying eas
[2013-10-02T10:55:50.532+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\1-global-read-s9-configuration.js
[2013-10-02T10:55:50.704+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\2-import-functions.js
[2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Calculating next free index based on the domain data...
[2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Domain contains server EssbaseAdminServices0 based on the prefix EssbaseAdminServices, index 0 is busy
[2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Domain contains server EssbaseAdminServices1 based on the prefix EssbaseAdminServices, index 1 is busy
[2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: The server is NOT exist, the index is 2
[2013-10-02T10:55:50.751+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: 2-import-functions.js: Deployment server index: EssbaseAdminServices2
[2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\3-global-epm-vars.js
[2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\5-mark-deployment-started.js
[2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\eas\6-init-eas-script-env.js
[2013-10-02T10:55:50.766+01:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
[2013-10-02T10:55:50.766+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\7-common-cp-jvm-options.js
[2013-10-02T10:55:50.813+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: isApplication32bitOnly flag value for EssbaseAdminServices2 : false
[2013-10-02T10:55:50.844+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: isJRockit flag value: true
[2013-10-02T10:55:50.891+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: Ignoring jvm option: -XX:PermSize=64m
[2013-10-02T10:55:50.891+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: Ignoring jvm option: -XX:MaxPermSize=256m
[2013-10-02T10:55:50.891+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\10-global-open-domain.js
[2013-10-02T10:55:50.907+01:00] [EPMCFG] [TRACE] [EPMCFG-02012] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.J2EEDomain] Looks like WebLogic domain, initing webLogic
[2013-10-02T10:55:51.016+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.high.WlstDomain] trace: Performing EPM and JRF maintenance
[2013-10-02T10:55:54.626+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.WlstConsole] trace: Current promt is ''
[2013-10-02T10:55:54.626+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initialising WLST console
[2013-10-02T10:55:54.954+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:55:54.954+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: CLASSPATH=D:\Soft\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Soft\Oracle\MIDDLE~1\JROCKI~1\lib\tools.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Soft\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Soft\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Soft\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;;D:\Soft\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;D:\Soft\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
[2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initializing WebLogic Scripting Tool (WLST) ...
[2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Welcome to WebLogic Server Administration Scripting Shell
[2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Type help() for help on available commands
[2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:14.631+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 25] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:2] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: WLST is ready
[2013-10-02T10:56:21.382+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: wls:/offline>readDomain(r'D:/Soft/Oracle/Middleware/user_projects/domains/EPMSystem')
[2013-10-02T10:56:21.382+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:21.398+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.high.WlstDomain] trace: Is online: 'false'
[2013-10-02T10:56:21.398+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initialising WLST console
[2013-10-02T10:56:21.492+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:21.492+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: CLASSPATH=D:\Soft\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Soft\Oracle\MIDDLE~1\JROCKI~1\lib\tools.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Soft\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Soft\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Soft\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;;D:\Soft\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;D:\Soft\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
[2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initializing WebLogic Scripting Tool (WLST) ...
[2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Welcome to WebLogic Server Administration Scripting Shell
[2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Type help() for help on available commands
[2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:30.712+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:4] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: WLST is ready
[2013-10-02T10:56:30.837+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: wls:/offline>connect('epm_admin', '**HIT**', 't3://CMAPPA1391.cm.par.emea.cib:7001')
[2013-10-02T10:56:30.837+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Connecting to t3://CMAPPA1391.cm.par.emea.cib:7001 with userid epm_admin ...
[2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Successfully connected to Admin Server 'AdminServer' that belongs to domain 'EPMSystem'.
[2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
[2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Warning: An insecure protocol was used to connect to the
[2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: server. To ensure on-the-wire security, the SSL port or
[2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Admin port should be used instead.

Hello Santy,
Thank you for your response.
In fact, I'm on a distributed architecture
Server 1: OHS as Web Server, Foundation (Shared Services, Workspaces )
Server 2: Essbase Administration Services "EAS" Essbase Provider Services, Financial Reporting CALC Manager --> (Database and deploy to application server)
When I configure EAS, APS etc... on server 2 (Database and deploy to application server), Weblogic is started on the server1 (by startWebLogic), but I have a "Failed" in the "deploy to server application", does not pass. But the database is "OK".
However, I try to install on the server CALC MANAGER 1, it worked.
So I ask myself, is that web applications can be on another server that Foundation?
Thank you for your return

Adding redirect path and pattern in Lion server for configuring software update server

Adding redirect path and pattern in Lion server for configuring software update server.Any changes

Ok, after days of browsing on the forum I found the following hint on another discussion related to AFP access:
"This may be a service ACL issue.
It turns out one of the latest Apple updates turned on Service ACL's which caused AFP connections to be blocked. Once I fixed the Service ACL in Server Admin... all connections and Single Sign On worked."
Well, after allowing access to all services to all users with Server Admin, we were finally able to log in the server with our admin account...
So, there must have been an update that turned on ACL's which caused even our local access, probably for OD/Kerberos, on the server to be restricted.

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Recommended and supported Hyper-v Server configurations

Similar Messages

Maybe you are looking for