Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Similar Messages

Oracle recommend configuring a Sun StorageTek 6140 with 15 hard disks

Hi,
How would Oracle recommend configuring a Sun StorageTek 6140 with 15 hard disks for optimal use with multiple Solaris servers running Oracle instances connected via a SAN? Should the storage array be configured as a single RAID 5 device and then LUNs created for the different servers? Or should each Oracle instance have its own dedicated hard disks?
Also might we see better performance if we used Solid State Devices for the ZFS Intent Log (ZIL) and/or L2ARC on ZFS, instead of using the UFS file system straight to the SAN?
Regards
NM

I don't think Oracle would recommended any particular way. I would consider the following, but your mileage may vary, so testing is very important.
Raid 1 (10) for logs
RAID5 for Tables
But if you have many servers access the same LUN's/VDISKS then contention may be a problem. Maybe consider consolidating all you servers to a single Oracle Server.( For protection a second server with Oracle Solaris Cluster)
ASM is the best method for managing disks and data placement. But if like to see files/directories then go for UFS with direct I/O enabled. ZFS is fantastic if you want to use Snapshot/clones/Compression, etc.. but I think UFS is faster.
As for cache, Oracle 11gR2 has support for storing objects specifically in FLASH, so look to use the Sun F20 card with 96Gb of flash.
HTH
Andy

Friend Recommendations: we're having trouble communicating with the game center server and are unable to turn on friend recommendations. Does anyone know how to fix this?

Friend Recommendations: we’re having trouble communicating with the game center server and are unable to turn on friend recommendations on our iPad. Does anyone know how to fix this?
we also get this error message when we try to connect the iPad to Facebook from the Candy Crush Saga game..... Failed: Sorry, you don’t have access to the Kingdom, right now. Please try connecting again later. anyone know how to fix this?

Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you.

Planning for product using multiple bom and multiple recipe involving SOP

Hi friends,
The problem. Currently we have maintained single BOM and single recipe (The BOM and Recipe used for MRP) for long term planning run. The FMCG sector of Client requested to have multiple BOMs and multiple recipes in the long term planning run. I.e. The planning is done quarterly and they wanted to use different BOMs and Different recipes for each quarter. But since the existing system has configured to use a single BOM and a single recipe we have a problem to use the long term planning run with the current setups.The problem we have is in this 001 planning scenario.
appreciate if you can help me how to accommodate multiple BOMs and recepis in the long term planning run.
thanks and regards
om

HI Mr. Ready,
We create PIR though a submit Job and in this case how to mention the production version while creating PIRs . Also if I am creating PIR through MD61 how to record the version.
Please advice.
Thanks and Regards,
Om

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.
I am the music teacher in a Special school in London UK currently working with Drake Music who are a charity that go into schools to enable music making through music technology. Our purpose is to enable a group of 7 children who have profound and multiple learning difficulties to play instruments on the ipads or through the soundbeam and to be able to play and jam together with me underscoring on the guitar. We're having a lot of fun and we're all learning a lot about what can be achieved using the amazing ipad technology. If you're doing a similar project I'd love to hear from you and we can swap notes!

See Recover your iTunes library from your iPod or iOS device.
You can use iTunes to easily manage multiple devices by having each sync with selected playlists. I don't personally have any recommendations for other software but perhaps others might.
tt2

Posting an Idoc with Multiple Headers and Multiple Lines

Hi all,
I have a scenario like this fileXIIdoc
Invoice file comes in text file with multiple header and multiple lines like this
111               aaa     13214234    US   (header)
09082010     ABC    9999            A     (Line)
222               ccc     43454543    US   (header)
09082010     XYZ    7777            B     (Line)
09082010     PQR    8888            C     (Line)
I need to post single Idoc with all the headers and lines
we are planning to use Custom Idoc,Is this possible by having the header segment as unbounded??
Regards
Edited by: Vamsi Krishna on Sep 8, 2010 8:05 PM

hi,
lets go again.
you have to edit the custom IDoc and change the ocurrance on the header segment. also modify the details segment adding an addtional field that identify which header that this detail belong.
for this case you cannot change the occurrance in SAP PI because you wont identify what i have told you before. in PI apply to change the occurrance if you could send ONE Idoc Per Header.
now is better clear???
Let us know.
Thanks
Rodrigo P-.

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

Webi XI 3.1 SP2 LOAD TESTING ISSUE WITH LOAD RUNNER

Hello,
We are launching a test campaign in order to test the Webi XI 3.1 SP2 (FP2.2) platform to validate it is capable to host 150 concurents users.
The test is pretty simple:
Logon to Infoview
Navigate to the Document list page
Make a search to find the adequate report
Open this document
Fill the prompts (doc is auto refresh)
Wait for the results
Logoff InfoView
The problem is related to the tool with which we are scripting that is not able to run this script (Tool is Load Runner (ex Mercury)). In fact, we are able to capture the script correctly but when it is replayed, it crashes when displaying the document list page as it can't find the frame with the list of documents and the tree view...
Do you know whether there are some specific settings to make it working correctely?
For information, the Protocol used for our testing are:
Web Click-&-Script
HTTP-HTML
AJAX

I've used LoadRunner for this purpose before. There is a tutorial that comes with the product. My suggestion is to go through that and from there you should be able to get it working with enterprise. I feel that's the best way to get up and running quickly.

Implementing Application gateway for 2 enterprise portals with backend syst

Hello Experts,
We have a scenario where in we have 2 different portal with backend SAP systems attached to them. We want to expose those to internet. we have an SSL certificate with a FQDN https://www.XXX.com
Can we have a mechanism in the application gateway wherein we can bifurcate the two portals by https://www.XXX.com/abc and https://www.XXX.com/xyz so that different users can logon to specific portal.
should we use a web dispatcher or apache reverse proxy for this scenario.
Awaiting your reply.
Regards,
Vinayak

Hi,
A while ago you had no choice then Apache Reverse Proxy...
Since a while now SAP has enhanced the Web Dispatcher so that one web dispatcher installation can handle more than one system. Check the following articles for details:
Overview: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/03/afe24bfeb7419b9172ffb6e7636926/frameset.htm
Detail: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
Example: http://help.sap.com/saphelp_nw70ehp2/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm
PS you still can choose to use the Apache Rev Proxy foor this but now you also have an native SAP alternative ....
Cheers and good luck,
Benjamin Houttuin
Edited by: Benjamin L.F. Houttuin on May 31, 2011 10:10 AM

What accounts need to be configured for a service tax 10%,a balance sht a/c

This below error occurred while clearing the entries.
"Ex.rate diff.accts are incomplete for account 0003260423 currency INR"
I have gone through this and found that, we should need to configure gain/loss accounts in OB09.
I am not sure, what accounts need to be configured for a service tax account(3260423), Its a balance sheet account.
Can someone guide me on this.
Thanks
Sudhir Krishna Kumar Singh

Hello Sudhir,
regarding to your incident, could you please try the following:
   1.The problem is probably caused by the settings in transaction OBA1.
     The system checks OBA1, if there is an entry for process KDF and
     the relevant G/L account 135090. If there is none -> F5 063 is
     created. Also the exchange rate difference accounts have to be
     maintained in OB09
     If you make a dummy entry in OBA1 & OB09 this account will be
     selected when trying to make an exchange rate difference posting.
     Please also check the documentation to field "No forex rate diff.
     when clearing in LC" in transaction OBY6.
   2.Basically solution is to create the mentioned account for exchange
     rate difference, in order to avoid error F5063.
     But, if you don't want to post that difference, I ask you to check
     the solution proposed into OSS note 546997.
Hope this could help.
regards
Ray

Recommended configuration for Oracle VM Server and VM Manager

Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

Problem in loading multiple lev1 and multiple lev2 WBS elements in projects

Hi guys,
I've a requirement to load (from file) projects with multiple level 1 and multiple level 2 WBS elements. I'm using CJ01 recording to load projects in step 1 and it loads all the projects successfully.
Next I need to load WBS elements of level 1 & level 2 under each projects and also level 1 & level 2 must be linked correctly. Now in this step what I'm doing is that am doing the CJ02 recording to load WBS elements (irrespective of levels) under each projects. But as in the data file, the sequence of WBS records are not guarranteed to be in the exact sequence of hierarchy of WBS elements, what's happening is that though WBS elements are getting loaded successfully, but level 1 & 2 are not getting linked to each other correctly. So the hierarchy is broken. Please help how to resolve this issue like how to design the LSMW correctly.
Alternatively we can use CJ20N for loading the correct hierarchy but here we need to select correct project/level 1/leve2 etc which is difficult in case if a project doesn't have level 2 or level 1.
Please suggest the easiest design.
Cheers guys.

Hi,
You have to use levels in recording.
I think using CJ01 only you can upload all the projects with hierarchy.
Just arrange the file records accordingly;
Level 1----
WBSE 1
Level 2----
WBSE 1.1
Level 2----
WBSE 1.2
Level 2----
WBSE 1.3
Level 1----
WBSE 2
Level 2----
WBSE 2.1
Level 2----
WBSE 2.2
Level 2----
WBSE 2.3
Now, hierarchy will be correct.
Regards,
Harsh.

SQL statement running balance query with previous balance taken into account

Hi Guys
I have a SQL statement which caclulates the running balance
for a list of transactions in a transactions table. This SQL
statement is as follows:
SELECT transID, debit, credit,
(SELECT SUM(debit-credit)
FROM transactions as D1
WHERE D1.transID <= D0.transID) AS balance
FROM transactions AS D0
The only problem I'm having is that I have to display
transactions between a particular date range. I have for eg.
transID, transDate, debit, credit fields in my db.
However the problem I'm having is that when the transaction
records are pulled out for the specified date range the balances
are only calculated for those records. I need someway of having a
balance b/f (brought forward) so that the selected records use that
as a 'starting' balance and then calculate the running balance as
normal.
Any easy solutions?
Many, many thanks for your help in advance.
All the best
Wesley

You'd need to determine the b/f then apply it against the
transaction records when they are pulled for a date range. So if
the date range is
Feb 1st, 2009 -> Feb 28th, 2009
You'd need to also get the previous balance in a separate
query, then use it to correctly display the running balance when
you output the date range.
I suppose a simpler way involving a little more DB work (and
possibly lots of coding) is to store the current balance as well
with each transaction; then when performing a date range you'd have
the balance as well and not have to calculate it on the fly.

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Similar Messages

Maybe you are looking for