Recommended Hardware & Maximum Load of Oracle 9iAS

I have a requirement where i will have around 2000 users, upto 3000 Oracle Reports, over Forms, approximately 200 Oracle Graphs and one of the data types i would use is LOB.
What Hardware i.e.
- Processor
- Memory
would be recommeneded. I could have multiple machines.
Please Advice urgently.
Regards
Faisal Ijaz.

I would definately recommend using 2 servers for Oracle 9iAS release 2. One server would for the Infrastructure and one would be for the mid-tier. With that many users, reports, and forms, I would suggest getting a quad Intel Pentium Xeon processor (more processing speed the better), 4+ gbs of ram (more ram the better), 3+ 40Gb+ hard drives in a raid 5 array for each server. Depending on what you backup system is like, you can opt to get a tape drive to do tape backups. Or if you have another server that does tape backups, that would be even better.
I have HP servers (ML570, ML530, ML370) and they are reliable and very easy to work with.
Thanks,
Martin

Similar Messages

Recommended Hardware, OS for Web Cache

We are planning to implement web cache for our 9i AS (Sun Solaris) environment. The Web cache server will be running on its own box. Also, we would like to perform load balance on our web cache tier down the road.
Keeping all this in mind. Could someone provide us the recommended hardware (/w cofiguration) and OS for implementing web cache. Thanks,

Web Cache is designed to run on low-cost commodity hardware. You need at most 2 CPUs (the faster the better) to run
a Web Cache instance. A single CPU machine is OK, too -- again, the faster the better.
For the money, you can't beat a 2x933 Linux box.
Then there's memory. Most 32-bit OSs provide 2GB of addressable memory. You want to make sure there's enough
memory to cache all the content you want to cache. Usually, 2GB is more than enough. 500MB - 1GB is usually sufficient.
Depends on your app.
In a few days, I will post a paper on http://otn.oracle.com/products/ias/web_cache/
that covers the best practices for sizing and performance of Web Cache 2.0.0.x (9iAS 1.0.2.2). This will help you with
sizing.
The network may also be a consideration for performance, as the paper mentioned above discusses.
Readers shoud note that the information in this standalone paper has been moved to the Performance and Tuning Guide
for 9iAS release 2 (version 9.0.2) which is due out shortly. Some of the information will be different in Web Cache 9.0.2 than
it was in Web Cache 2.0.0.x.

11i load balancing web nodes without use of Hardware http load balancer

I am looking at note 217368.1 (Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i) and some other notes on load balancing but some aspects are not clear.
Aim is to implement load balancing traffic to web nodes without using Hardware ( BigIP, cisco etc) for HTTP layer load balancing.
Which is more preferable between dns or Apache Jserv load balancer ?
Need details like failover capabilities, death detection of node, functionality testing and ways to monitor Apache Jserv load balancer.
Any help in this regard is welcome .
thx
arun

Oracle recommends using loadbalancing hardware rather than using DNS. If you want the features you mention above, you will need a hardware loadbalancer.
http://blogs.oracle.com/stevenChan/2006/06/indepth_loadbalancing_ebusines.html
http://blogs.oracle.com/stevenChan/2009/01/using_cisco_ace_series_hardware_load-balancers_ebs12.html
HTH
Srini

Recommended Hardware Config for huge OLAP Cube build

Hi David ,
Can you please provide the recommended hardware config for cube having billions of data under fact table . We ran a cube with 0.1 billion of data took around 7 hours to process. What could be the key areas to gain the performance benefit ? ansd also what could be the CPU , RAM (server) , RAM (Oracle DB) to gain much more perf benefit in such configurations ?
Also we have 32 bit windows 2003 server .Can we get better result if we switch to 64 bit ?
Thanks in advance,
DxP.

Hi!
Well, I would definitely recommend you to proceed with a consultant because I feel that you have some lack of methodology and experience together with time constraints for your project.
Regarding hardware, unfortunately, I would not be able to give you any precise figures because I have no supporting information. What you should bear in mind that your system must be balanced. You (better with consultant) need to find a right balance between all the factors you consider as important while building a pile of hardware:
- cost
- architecture
- speed
- availability
- load scenarios
etc...
Regarding architecture point bear in mind that today finding right balance between processing power and storage processing capacity is a challenge. Put attention to this.
Regards,
Kirill

Oracle 9iAS on Solaris w/Oracle 8.1.6 on NT 4

We are currently running Oracle 7.3.4 on NT 4 w/Oracle Application Server 4.0.8.1 on NT 4. We are planning to set up a new Oracle 8.1.6 database server to replace the 7.3.4 database, and after that set up a Solaris box with Oracle 9iAS to replace the OAS 4.0.8.1. Can someone (ideally from Oracle) comment whether there are any issues which would cause problems between such a final set up? I heard that database-wise 8.1.5 was the minimum necessary to work with iAS even back when it was 8iAS. In any case, I would like to get some confirmation that the NT database and the Solaris Application Server will not have problems. I didn't see any comments about problems in a quick look at the 9iAS release notes or installation guide.
Thanks.
-Ken Ho

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Todd Eisemann ([email protected]):
HI
Can anyone tell me the mystical secrets buried in Note 131299.1? I have this same problem on a Pentium 4. Yet, I do not have an Oracle support contract. I bought the OTN bundle, but did not buy any support.
Do I have to buy support just to load any of the OTN bundle on my new P4 system?
thanks
<HR></BLOCKQUOTE>
problem @see: http://developer.intel.com/design/processor/future/manuals/knownissue.htm
solution @see: JRE Version 1.2.2_007 for Microsoft Windows
(http://java.sun.com/products/jdk/1.2/jre/download-windows.html)to get new symcjit.dll, replace old version.
null

Application Ear file deployment on Oracle 9ias(9.0.3)

Hi,
I'm trying to deploy an application (JSP + BC4J) under Oracle 9ias using the Enterprise Manager (EM).
No error occurs during the process but I can not load the application with internet explorer.
the following message appears : "Not Found
The requested URL /AgatteWF/index.jsp was not found on this server."
Deploying the application under OC4J standalone with the same ear file works fine.
Does anyone got that problem ?
Any help is welcome
regards

Hi
I already had a look to the log files.
They don't show any error.
the webcontext is correct but index.jsp is not placed under the "WEB_INF" directory.
I don't think that's the reason of the problem 'cause i succeeded once to deploy the same application under the IAS.
I made the same operations i did before (creating a new oc4j instance under IAS after having dropped the old one, deploying the application, creating the data source...)
But i don't know why it doesn't work this time.

Error when synchronizing an oracle 9ias instance

Hi,
I've got a farm with 2 oracle 9ias instances( with
a File Repository ).
Both 9ias instance belong to a cluster.
When i try to synchronize one of the oracle 9ias instances,
i've got the following error :
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2004-02-04T16:25:47.511+01:00</TSTZ_ORIGINATING>
<COMPONENT_ID>DCM</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>benchi</HOST_ID>
<HOST_NWADDR>192.168.1.6</HOST_NWADDR>
<MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
<PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.1.6:39402:1075908347502</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[ RM ] getCachedStatus:</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[oracle.ias.cache.TimeoutException:
An exception occurred in the method CacheAccess.get
at oracle.ias.cache.Response.waitFor(Unknown Source)
at oracle.ias.cache.CacheHandle.netSearchList(Unknown Source)
at oracle.ias.cache.CacheAccess.getAllCached(Unknown Source)
at oracle.ias.sysmgmt.persistence.cache.StatusLoader.load(Unknown Source)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.ias.sysmgmt.persistence.cache.CachePersistence.getCachedStatus(Unknown Source)
at oracle.ias.sysmgmt.persistence.cache.CachePersistence.getPersistenceInstanceState(Unknown Source)
at oracle.ias.sysmgmt.persistence.PersistenceInstance.getPersistenceInstanceState(Unknown Source)
at oracle.ias.sysmgmt.status.DaemonState.<init>(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.IASInstanceImpl.getDaemonState(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.waitDaemonUp(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
Any ideas ?

Joao D Franco Net
Could you share below information:
Can you cross check if deployed driver are OSGi enabled? Refer this.
Can you share screenshot of the destination settings and error ?
note: The blog you followed is referring to SP03 (1st GA of SMP3)..You should not have any problem in connecting to Oracle DB being on any SP.
Regards,
JK

Oracle 9iAS MapViewer 9.0.4 image problem

I've just installed Oracle 9iAS MapViewer 9.0.4 preview version.
I am using:
Oracle 9iAS MapViewer 9.0.4 Preview Version
Oracle9iAS (1.0.2.2.1) Containers for J2EE
When i receive picture of map there is no objects on it. On J2ee console i can see following error:
Image is not in 8.1 format
Copy of console report is:
D:\Oracle\iSuites\j2ee\home>java.exe -jar orion.jar -config config\server.xml
A nonfatal internal JIT (3.10.107(x)) error 'Relocation error: NULL relocation target' has occurred
in :
'org/apache/crimson/parser/Parser2.maybeComment (Z)Z': Interpreting method.
Please report this error in detail to http://java.sun.com/cgi-bin/bugreport.cgi
Warning: Error reading transaction-log file (/D:/Oracle/iSuites/j2ee/home/persistence/transaction.st
ate) for recovery: premature end of file
Forced or abrubt (crash etc) server shutdown detected, starting recovery process...
Recovery completed, 0 connections committed and 0 rolled back...
[oracle.lbs.mapserver.oms, INFO] oms servlet document-root path: D:\Oracle\iSuites\lbs\mapviewer\we
b\
[oracle.lbs.mapserver.oms, INFO] No init parameter "oms_config". Will use default.
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
[oracle.lbs.mapserver.core.MapperConfig, INFO] using default config file: D:\Oracle\iSuites\lbs\mapv
iewer\conf\mapViewerConfig.xml
[oracle.lbs.mapserver.core.MapperPool, WARN] destroying ALL mapmaker instances.
[oracle.lbs.mapserver.core.MapperConfig, INFO] Map Recycling thread started.
[oracle.lbs.mapserver.oms, INFO] *** Oracle Map Viewer is successfully started. ***
[oracle.lbs.mapserver.MapServerImpl, INFO] adding a map data src [name=mvdemo]
[oracle.sdovis.CacheMgr, INFO] Setting disk path for cache to: C:\WINNT\TEMP\1\
[oracle.sdovis.CacheMgr, INFO] Java Object Cache opened. Region=Oracle SDOVIS Cache.
[oracle.sdovis.CacheMgr, INFO] max_cache_size=64 M, max_disk_cache_size=512 M.
[oracle.sdovis.ImageCacheMgr, INFO] Setting disk path for image cache to: C:\WINNT\TEMP\1\
[oracle.sdovis.ImageCacheMgr, INFO] MapViewer Image Cache opened. Region=Oracle SDOVIS IMG Cache.
[oracle.sdovis.ImageCacheMgr, INFO] max_cache_size=64 M, max_disk_cache_size=1024 M.
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.lbs.mapserver.core.MapperPool, INFO] added a mapper instance to the pool [data src=mvdemo]
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.PredefinedThemeQuery, INFO] Connection is a pre-9i database
[oracle.sdovis.CacheMgr, WARN] oracle.ias.cache.CacheException:
null CacheAccess.get
null exception loading geometry from database: errCount = 1
null
Image is not in 8.1 format
at oracle.ias.cache.CacheInternal.exceptionHandler(Unknown Source)
at oracle.ias.cache.CacheLoader.exceptionHandler(Unknown Source)
at oracle.sdovis.CacheGeometryLoader.load(CacheGeometryLoader.java:79)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.sdovis.CacheMgr.get(CacheMgr.java:182)
at oracle.sdovis.JDBCDataSource4PT.loadFeaturesInWindow(JDBCDataSource4PT.java, Compiled Code)
at oracle.sdovis.JDBCDataSource4PT.prepareFeatures(JDBCDataSource4PT.java:184)
at oracle.sdovis.PredefinedTheme.prepareData(PredefinedTheme.java:79)
at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1143)
[oracle.sdovis.CacheMgr, WARN] oracle.ias.cache.CacheException:
null CacheAccess.get
null exception loading geometry from database: errCount = 8
null
Image is not in 8.1 format
at oracle.ias.cache.CacheInternal.exceptionHandler(Unknown Source)
at oracle.ias.cache.CacheLoader.exceptionHandler(Unknown Source)
at oracle.sdovis.CacheGeometryLoader.load(CacheGeometryLoader.java:79)
at oracle.ias.cache.CacheHandle.findObject(Unknown Source)
at oracle.ias.cache.CacheHandle.locateObject(Unknown Source)
at oracle.ias.cache.CacheAccess.get(Unknown Source)
at oracle.sdovis.CacheMgr.get(CacheMgr.java:182)
at oracle.sdovis.JDBCDataSource4PT.loadFeaturesInWindow(JDBCDataSource4PT.java, Compiled Code)
at oracle.sdovis.JDBCDataSource4PT.prepareFeatures(JDBCDataSource4PT.java:184)
at oracle.sdovis.PredefinedTheme.prepareData(PredefinedTheme.java:79)
at oracle.sdovis.DBMapMaker$LoadThemeData.run(DBMapMaker.java:1143)
[oracle.sdovis.DBMapMaker, INFO] **** time spent on loading features: 10047ms.
[oracle.sdovis.DBMapMaker, INFO] **** time spent on rendering: 343ms
Is anybody acquainted with sollution to this problem?
regards
Joze Miklavcic

Are you using an old database, like 8.1.5 or 8.1.6? If you cannot upgrade to 9i, here is the workaround.
In the mapViewerConfig.xml, add the following line to
the <global_map_config> section:
<performance no_unpickler="true" />
So that it looks like:
<global_map_config>
<performance no_unpickler="true" />
</global_map_config>
Then restart oc4j. By the way, you seem to be using oc4j
1.0.2.2, which is too old for mapviewer to work properly (but it is not the cause for the above issue). Please
upgrade to at lease oc4j 9.0.2.
thanks,
lj

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Problems with url-bindings when redeploying on Oracle 9iAS

Hello!
I'm working on a project where we're having a development server that runs Oracle 9iAS (9.03). This server is used both for system-testing and for continuous integration using Cruisecontrol. The application that we deploy is an ear-application with several web-applications and ejb-components. We have in order to make these two deployments work together defined two different application servers on the console and deployed on both of them. We have also specified prefixes, like /cc/ on the url-bindings so that we can access all the web-applications.
Our problems usually arise when Cruisecontrol does a redeploy of what it has built before it's going to test it. It uses dcmctl for this and it usually runs successfully, but sometimes the application server resets the url-bindings so that all the web-applications go to the root. Other times it removes the whole application and I've even seen it show out-of-memory errors even though it still has about a gigabyte of memory available. I don't think this is related to that single server because I've seen the same thing happening on our production-server the first time I was going to redeploy through the console-application.
Have anyone else had the same problem? (...and hopefully found a solution to it?)
It's quite annoying for us because this screws up Cruisecontrol for us at least once a day and I'm not sure how good this is for a production environment.
Regards,
Bjorn Vidar Boe

Does anybody know if Financial Brokerage Service(FBS) can be deployed on Oracle 9iAS using OEM. I got the following error when I tried to deploy the ear file:
Deployment failed: Nested exception Root Cause: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>. Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>
Thanks ! Hi -
Can you check and see what version of 9iAS are you using?
The ejb-local-ref tag is a new tag introduced in the J2EE 1.3 specification - so you will need to be using the Oracle9iAS v9.0.3 release which is J2EE 1.3 compatible.
If you are using the v9.0.2 release then you will need to upgrade to v9.0.3
cheers
-steve-

Oracle 9Ias installation on Linux 9.0

Hi,
I am not able to install Oracle 9IAS on Linux 9.0, either it gives linking error like ins_oemagent.mk file also, while creating the database end-of-communication channel error.

Thanks a lot for looking in to this.
I am starting the reports server using the rwserver.sh file which calls the reports.sh before starting the server. Reports.sh sets the LD_LIBRARY_PATH, hence I donot think that is the issue.
As I said earlier, the rwEng engine is the culprit. It does not start up.
In the server trace, I get the state of the rwEng-0 to be Initial and that's it nothing after that about the rwEng engine.
In rweng trace, I see that it is able to init the orb, load librw90.so and start the cinitengine.
After that it I believe it should register the rwEng engine, which it doesnot no errors to this effect however.
As the rwEng has not started completely , the server is always in a starting up state (initializing), and any connect results in 50001.
Also, to ensure that there are no configuration issues, I loaded iDS 9.0.2 on linux. The reports server from the iDS starts without any hassles with the same conf file as of 9iAS.
Hence I am stuck where to look for problems.
Please help.
Thnx.
jaggu

RunInstaller hangup in Oracle 9iAS patchset 3

When I try to execute runInstaller for the patchset 3 Oracle 9iAS it's hangup with the follow message:
[ias@serverias Disk1]$ ./runInstaller
[ias@serverias Disk1]$ Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/bin/java. Please wait...
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4000ad3a
Function name=_dl_relocate_object
Library=/lib/ld-linux.so.2
Current Java thread:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1335)
Please help me
Thanks a lot
Regards

Please confirm which version of the patch set you are using (9.0.2.3?). Also, please confirm which operating system you are running (platform and o/s version). In addition, please confirm JDK level (1.3.1_?).
Thank you.
Danielle

Oracle 9ias forms services

before running the form-which was developed by
9i form developer-applet is being loaded..
but i don't want applet is loaded every time until the computer is not turned off IS IT POSSIBLE? IF YES
PLEASE HELP ME..
also i don't want to see "ORACLE 9iAS FORMS SERVICES
ORACLE9iAS RELEASE 2
ORACLE" intro
every time
thanks your interests

thans a lot..
for my first quest.i can make a brief explanation.
for ex.i have built a form and run it,before it runs applet is being loaded OK.but after i make a few changes
for ex.in the WHEN_BUTTON_PRESSED trigger..when i run it again applet is being loaded again but i don't want this.
thank again for your interest
if you answer this i will be so glad..

Error in the assistant of installation of Oracle 9ias 9.0.2 single sing-on

Install oracle 9ias 9.0.2.0, but when this in the assisting existing Oracle 9ias single singn-on the error that the host or port are not been worth appears. in the host sijita.uptc.edu.co places and in the port 7777. That it can be the error??? one doesn't also eat to pull up the Apache service because the following error appears:
$ apachectl start
Syntax error on line 6 of /u06/oracle/ora9ias/Apache/Apache/conf/mod_osso.conf:
Unable to deobfuscate the SSO server config file,
/u06/oracle/ora9ias/Apache/Apache/conf/osso/osso.conf, error Bad padding
pattern detected in the last block.
/u06/oracle/ora9ias/Apache/Apache/bin/apachectl start: httpd could not be started
WARNING!! Direct use of apachectl within Oracle9iAS is
deprecated. Using apachectl in conjunction with opmn may lead
to unexpected behavior (such as opmn automatically restarting
OHS after it has been shutdown using apachectl). Please use
dcmctl (located at ORACLE_HOME/dcm/bin/dcmctl) instead.
apachectl may not be shipped with future versions of Oracle9iAS.
$ httpd start
Ouch! ap_mm_create(1048576, "/tmp/apache/logs/mm.1262") failed
Error: MM: mm:core: failed to open memory file (No such file or directory):
OS: No such file or directory

9iAS (9.0.2.0.1) is desupported and will not be certified against any new OS releases...
Regards,
Martin

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

Recommended Hardware & Maximum Load of Oracle 9iAS

Similar Messages

Maybe you are looking for