Recommended Media File Size for 56kbs connection

What would be the largest single media file size when
developing an adobe presenter course deployed through and LMS
keeping the min connection to 56kbs in mind?
Our current standard is trying to keep each media file under
200k. Our courses typically have audio and this is where it becomes
an issue. The audio quality suffers by publishing it out to a low
quality. I would love to be able to publish our courses with the
best setting, but this bloats the mp3 file to be quite large. Is a
200k file to strict for a min connection of 56kbs? Should the mp3
be optimized before being imported into the breeze presentation?
Any tips or best practices would be helpful.
Thanks in Advance!!!

Yes, reading other articles, record in MP3 outside Presenter
and then import the MP3 audio. MP3 audio is already compressed and
Presenter may add a little more compression.
I would also try to optimise other bits and pieces in the
PPT, like having the same font rather than all different ones and
optimising image qualitly, lessen the qualitly of your back ground
images.
The other option is a hassel but an option, have 2 PPT files,
one high res and one low res.
Remember that Breeze does stream to internet connections. The
end result of the user being able to play the Presentation will be
the same regardless of the internet connection. Internet speed is
only about the speed of whihc it can download.

Similar Messages

Can i have a smaller file size for songs that i put on iphone vs mac

i have ripped a lot of my cds to itunes on my MBA. i used the aac high quality setting.
is there a way that i can upload lower quality/smaller size versions of the songs that i will put on my new iphone ?
Q2: once i rip cd into itunes (on my MBA)... is there an easy way I can later decide to save space and re encode them at 128 instead of 256 (for example).
i notice that you cant just willy nilly copy/delete from the itunes media folder because itunes doesnt seem to 'refresh' with the new files.
thx!

1. the ONLY place i see where you can set the sampling rate,etc is under preferences/general/'when a cd is inserted".... am i missing something?
No.
2. when i want to add an existing mp3 file (from outside the apple realm) , i am using itunes "add to library" and browsing to some mp3 file(s) . it doesnt give me a option to convert it to an m4a format... it seems to just add it to the itunes library without changing the mp3 file .... do i have any option here?
You don't need to convert formats and I would not recommend you do so. You will simply lose quality.
To answer your original question...
can i have a smaller file size for songs that i put on iphone vs mac
If you want smaller files on the iPhone, see my post above which converts them when syncing to theiPhone.
If you really want to convert when adding songs to iTunes...
iTunes prefs > General - Import settings as you want.
Hold Option (Mac) or Shift (Windows) and choose File > Create New Version > Convert AAC (or what your settings are in previous step).
This will convert and add the file instead of adding the file then converting and having 2 of the same song in iTunes.

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum file size for export into MP4?

Hello,
I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
Thank you
jiri

You are right.
So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
Video is 1920x1080 (AVCHD) 25fps in a .MTS container (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
This is my largest video project (1h 54min) I dont have any other problem with other projects.
I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
Let me know your opinion

Maximum file size for importing into Premiere Pro CS6

Hi,
I'm considering recording raw video, no compression at 720p, 30 fps for 20-30 min. This woudl result in a file that is close to 80 Gbytes. I'm wondering what the maximum file size for importing into premiere Pro is and if I need to split this file up into smaller pieces. Any recommendations on how I may deal with uncompressed raw video that is pretty long in length?
Thanks,
Serena

There is bound to be some limit somewhere in the program, but you should be well below that. The biggest issue might be whether your computer is up to the task of handling it. If you will post your computer specs., someone will give you comments on that aspect.
Good luck,
Hunt

What is theoptimal file size for stills, and dpi?

what is theoptimal file size for stills, and dpi?

In video dpi is not relevent. What counts in video is pixels. In FCP most recommendations I have seen is to size your stills so they have no more than 3 times the pixels in your project aspect ratio. For example if your project is 1280x720 then stills should be no more than 3 times the 1280x720. This allows you to crop the stills and still have good resolution. If no cropping is anticipated then they could be the same size as your project.

Ideal file size for photos

If I am making photo albums in iWeb, what is the ideal file size for the photo file?
My camera now is 7 megapixel, so the original file sizes are about 3 MB, obviously that'll be very slow to load.
To what file size should I save it to make it load at a reasonable speed and still have a reasonable quality? 500 KB? 200 KB?
In case this is a factor, the typical album I make would have about 40 - 50 photos.
Also, what are the best ways to batch converts -- making a group of photos 500 KB instead of 3 MB? I know a few time-consuming ways (ie. individually resaving the files) or using a thumbnail-making program (have used a program called Thumbs Up).
Any other suggestions? Thanks.

If you are importing your photos directly from iPhoto to iWeb, they will be scaled down to a max dimension of 800x600. If you are using a photo template page or making a gallery page using the following method...
http://www.mac.com/web/en/Blog/013C4180-4787-4847-BAAB-319222AFC652.html
...iWeb will also make your thumbnails for you automatically.
For all your other freeform pages that you might make, it is always a good idea to size your photos down to their usage size. A good rule of thumb is to consider the width of your page, which by default is 700px. Then divide it out by how many photos across you expect to have roughly. So 3 photos across 700 pixels means that the photos should be scaled to roughly 233 pixels wide maximum. Just a rough approximation is fine.
The reason I recommend doing this is that if you drop in a 2500 pixel wide image into iWeb directly, and you only plan on using it as a 233 pixel wide image on the page... iWeb will do a fine job of scaling the photo down to size BUT it will also save the full resolution photo as part of your web page....not to use, but just for safe keeping. And if you ever discover the RSS feed on your website, you will see that iWeb makes all of these high resolution photos available for download, too! So beware if you value your original work! Don't feed them directly to iWeb.

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

How do I find a file size for a project in its entirety ???, How do I find a file size for a project in its entirety ???

How do I find a file size for a aperture project in its entirety ????

You can't. The Aperture library is a combination of database and flat files, a project can be split among multiple files in combination with other projects. The size of any of those files (or a sum of the files) would have no meaning concerning the size of a project.
BTW typing in a large bold font like you did is seen by many in then on-line community as a sign of shouting and is considered bad form. I'm sure you didn't mean to shout at us here as we are all just users here freely giving of our time to try and help folk like yourself so please in the future use the standard font.
regards

Please can you tell me the default maximum file size for an attachment in Case Management v12 ?

Hi,
Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
Thank you
Regards,
Anthony

Hi,
The default max attachment size is 8MB.
Regards.
Mike

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Average file size for an app

Apparently the smaller the file size the better but I would like to know what's the average or "ideal" file size for an app that contains videos/audio?

That will depend on the platform you are aiming the game for. File>New will give you some ideas in the presets.

Where can I find the file sizes for each application before downloading?

Where can I find the file sizes for each application before downloading? I have limited download (525 MBs/day) because of Hughsnet and I need to know each applications total size before I download.

You can go to the trial page to get an estimated size. As the Creative Cloud products change over time though this may become less accurate.
If you are on a limited bandwidth account then you may want to consider purchasing a perpetual copy of Creative Suite 6 as opposed to subscribing to the Creative Cloud.

I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

Yes, you do this when you export the images from the Library.
File -> Export
in the Size section, you don't need images larger than the frame size, so you can specify that and in the Jpeg Quality you can select the amount of compression used.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Is it possible to have same file size for different dpi?

I changed one.TIFF file (300dpi, 1024X1332) to .jpg files of four different dpi. But when I checked the four result jpg files, I found out that they are all in same file size and quality.( I also have checked the property of the files in the Windows.)
I think more DPI means more data and more file size. Am I wrong?
I use Photoshop CS 5.1(64bit, WINDOWS) - which is part of my Adobe Master Collection CS5.5.
TIFF(300dpi, 1024X1332) ->
1. JPG(72dpi, 1024X1332) : 306KB
2. JPG(108dpi, 1024X1332) : 306KB
3. JPG(144dpi, 1024X1332) : 306KB
4. JPG(600dpi, 1024X1332) : 306KB
I tested a few times more with different files. and same result comes out.(same file size for different dpi)
Thanks in advance.

Yes absolutely. Great observation. PPI does not control the number of pixels, just how big they are.
Now, if you change the PPI in the Image Size dialog with Resample checked.. then, that is a different story. In that case you will be changing the pixel dimension of an image (i.e.,changing the total number of pixels making up the image) while keeping its print size.
In your test files, you will notice all the print sizes are different, because all you were telling Photoshop to do was change the size of the pixels (if or when the image is ever printed), which is really just a bit of metadata of the file.

Recommended Media File Size for 56kbs connection

Similar Messages

Maybe you are looking for