Recommended NAS solution for iTunes Server

I would like to get a NAS drive solution so I can have Itunes running without a PC/MAC running. What is the recommended vendor for NAS product that works well with macs
Once the new apple TV is out I would like the apple TV to stream from the NAS without having a computer on
Thanks in advance for your suggestions

I've been looking at the QNAP TS219P, which may be overkill for you. I've had issues streaming HD content (720 or 1080p) over wireless, less so with wired ethernet, but I'm still paranoid that the NAS is the slowest link sometimes.
If you check out smallnetbuilder.com you can see they compare different NAS boxes based upon their read/write speeds, you can even plot performance versus price. You need to make sure whatever NAS you get not only will support the read speeds of the video you plan on streaming (bitrate) but also whatever protocol Apple TV will use. Most QNAP's support iTunes servers, AFP (Apple's network protocol) and DLNA (a standard protocol for media servers). This is just what I've picked up in my research to purchase my own NAS box, although I wasn't considering Apple TV compatibility. I could be wrong, but if I had to guess, I think if you get a NAS with decent read/write/throughput (enough to at least match 720p and 1080p bitrates) and AFP/iTunes/DLNA support, you will be safe.

Similar Messages

  • HADR Solution for SQL Server Analysis Services (SSAS) 2014 on Azure Iaas

    Hi All
    I am required to build a HA/DR solution for SQL Server and SSAS 2014 on Azure. So far I could build AlwaysOn high availability solution for SQL Server on Azure but haven't found any solution for SSAS.
    Failover Clustering is not an option on azure because of the restriction of not been able to use shared storage. We also determined that the cost savings of using SQL + the cost of the 3rd Party replication tool was a wash (ie no real cost savings).
    Any lead on this would be appreciated.
    Thanks,
    Viral Shah
    Thanks - Viral

    Hi Viral,
    A clustered implementation of SSAS can be configured in Microsoft Azure. Such a configuration would need to meet all the requirements stated in the following document including Active Directory and storage.
    How to Cluster SQL Server Analysis Services
    http://download.microsoft.com/download/D/2/0/D20E1C5F-72EA-4505-9F26-FEF9550EFD44/SSAS_Failover_Cluster_V4.docx
    Thanks,
    Lydia Zhang

  • Quicktime streaming solution for Lion server?

    Is there a Quicktime streaming solution for Lion server? I can install QuickTime Broadcaster OK and use that but wonder if there is a more effective solution.
    thank you.
    michael

    Will the Darwin server at http://dss.macosforge.org/
    work?

  • Using a NAS to as iTunes server

    I am looking to purchase a NAS to use primarily as a reliable (RAID-5) photo and music repository, to be shared amongst my family computers (6 PCs). Most of our iTunes library content was purchased from the iTunes store, and the rest ripped from CDs.
    I see that several NAS devices claim to have built-in iTunes server capability, but do not really go in to exactly what that means. I am wondering specifically how this works with the digital rights management of iTunes Store purchased files.
    Basically, I want to be able to run iTunes on any PC, purchase from the iTunes Store from any PC, have the content downloaded to the NAS, and be able to see that from any other PC, from which an iPod can sync.
    Thanks in advance
    --Michael

    Hi - I've been working on the same project; in my case between pc's, a macbook, an NAS, and the Tivo series 3. Here's what I've learned so far:
    - you can set up a library on an NAS through Bonjour; the NAS must be preconfigured with a Samba server and Bonjour enabled to be recognized by iTunes clients (I can confirm this works with the MacBook client without downloading the music files to the local hard disk but I have not built a playlist on the NAS yet)
    - you can consolidate all your libraries from existing clients to the NAS, so that music you have purchased, encoded, etc. can all be put into one place with the same playlist info
    - you can keep track of music encoded or purchased by any client by using a synch app like TuneRanger for Mac and PC (same software works on both); this will also periodically synch podcasts and other content as well
    - you can play iTunes libraries and playlists on your home theater system through Tivo Desktop a local iTunes client (not sure if that will work with the shared NAS library yet but I'm working on it)
    - you can install Bonjour on your PC as a download from Apple but it needs to be installed or repaired after every Java SE runtime install or update; Bonjour is included with any OS 10.4 or higher on the Mac
    - you can synch iPods to the NAS through a local iTunes client; this definitely works with the MacBook but I have not yet attempted with a PC client
    - I picked up the Cavalry 2TB NAS product that is now selling for $300; the doc set is not a literary masterpiece but it gets the job done in significant detail; the internal drives I got with this appliance are WD Caviar SE16
    Give it a shot - what have you got to lose but hours and hours of TV!

  • NAS solution for iMac

    Not sure if this is the correct forum, but I was wondering if anyone has installed a NAS solution that they are happy with. I'm consider the Buffalo 2TB Pro duo (LS-W2.0TGL/R1). Has anyone had any experience here?
    Thanks.

    Lots of people with similar problems, not much in the way of solutions. Running 10.5.7 on Mac Minis one of which is the "server". I have a Buffalo Linkstation 1TB NAS as the main backup drive for both minis.
    Memeo Life agent worked fine on firewire drives and 10.4
    Now i can configure the backup add the NAS as the destination and the backup will run. However several hours later it will display "disconnected" and the wheel of death will start up. I have checked the configuration of the NAS - no sleep, etc. I can also just connect to it via finder on all machines in the network.
    NAS is connected to the Mac Minis via 10/100 hub. No external facing machines on the LAN i.e. nothing weird on the network that might be behind this. I am basically now without backup on my main machine.
    Any fixes, suggestions gratefully received.

  • I want to find any backup and recovery solution for SharePoint server 2013 enterprise

    Dear Expertise,
    Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?
    KF

    Hi,
    According to your post, my understanding is that you wanted to know some backup and restore solution for SharePoint 2013.
    There are two Technet articles about the backup and restore, you can have a look at them.
    http://technet.microsoft.com/en-us/library/ee428315(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ee662536(v=office.15).aspx
    You can also use some third-part software tools to achieve the same scenario.
    http://www.avepoint.com/products/sharepoint-infrastructure-management/data-protection/
    http://www.sharepointreviews.com/sharepoint-reviews-articles/sharepoint-administration/254-sharepoint-backup-recovery-evaluation
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Solution for iTunes error 0x80092013

    Hello everybody!
    You receive this error when you try to log in to your account iTunes or try to get access to iTunes Store.
    I found a solution for this error.
    Try these instructions, and if it helps, please write about it here. Thank you!
    1. Disable updating Windows.
    2. Open a command line as administrator.
    3. Enter this command: "wusa.exe /uninstall /kb:2872339"
    4. Restart your computer.
    5. Open a command line as administrator again.
    6. Enter this command: "wusa.exe /uninstall /kb:2882822"
    7. Restart your computer.
    And try to log in to your iTunes.
    I hope it will help you!

    Hi, chau.satish.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are receiving error 11556 when attempting to connect to the iTunes Store.  Here are the steps for this specific error that I would suggest going through.  
    "Error 11556"
    This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
    The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
    For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
    iTunes: Advanced iTunes Store troubleshooting
    If the above steps do not resolve the issue, make sure that the iTunes Store is not disabled in Parental controls.  
    Use Parental Controls in iTunes to set content restrictions
    -Jason H.  

  • External drive for iTunes serving?

    We have an intel Xserve 10.6 server with a 1 TB Apple Drive Module. We need some more space for iTunes media for serving out audio to a small audience (perhaps 10 simultaneous users). Would it be OK to use an external drive (USB2) for this?
    Thoughts?

    Hi Gil,
    how are you planning on distributing the music to your users machines? iTunes has it's 5 user per day limit so if you have 10 users you wouldn't be able to use the sharing function. QTSS is an option or something like nicecast which is about $40 (free trial available). Once you are in the realm of streaming it's your network that is sending the information around as you'd be playing the same content to everyone.
    If you have the xserve you could always use the 2nd network card to separate the other traffic going to the server if needed.
    So yes a USB2.0 external disk should do the trick. In our office we have 2 older macs that are used as jukeboxes. So people logon to the jukebox and play their shared iTunes music over the speaker system we have. That's another possible option for you.
    Hope that helps
    Beatle

  • Custom based solution for Lync Server 2010

    I am working with a customer which is a school and we are implementing Lync Server 2010 as UC solution. There are few considerations for this solution. The requirements are -
    1. The girls should always chat to girls not boys and vice-versa
    2. The students from same class should chat and not with other classes.
    So, wondering if we have any solution for the same. We dont have time and developer to work on Lync Server SDK and give us the solution.
    Thanks and Regards/Harpreet S

    Hi,
    Yes, please try ethical wall as Saleesh said.
    http://windowspbx.blogspot.com/2012/07/controlling-who-has-what-access-to-who.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Looking for a reliable NAS Solution for my Mac Pro?

    I upgraded my Mac Pro to the new one when they first came out. I needed a place to house the hard drives that were in the previous machine. I purchased a NAS enclosure for four hard drives at Micro Center, but the connection often drops, freezes or crashes. I am really worried about this potentially damaging the hard drives in the NAS enclosure.
    Can anyone recommend a good, reliable NAS enclosure that will support SATA hard drives up to 3TB each in capacity?
    Thanks.

    And instead of say a nice reliable Thunderbolt enclosure?
    Have a look on http://www.macsales.com/thunderbolt -
    they have a good collection or are you in need of something that works on a LAN and makes NAS essential criteria?

  • A solution for iTunes install problems

    I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
    The following is what worked for me.
    BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
    Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
    Find, download, install a copy of jv16 Power Tools.
    Then:
    1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
    1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
    1b. The Registry is your PCs mind; do not scramble it. You will be sad.
    2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
    3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
    4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
    5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
    6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
    7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
    8. Reboot.
    Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
    Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
    It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
    I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
    And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
      Windows XP   Try testing your upgrades before releasing them!

    Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

  • One solution for 'iTunes has stopped working' message

    This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
    I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
    What finally worked for me were the suggestions at this link:
    http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
    Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
    I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
    I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway.  (^-~)
    BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
    Thought I pass this on in hopes it saves someone some grief....

    iTunes has stopped working message after having it open for one minute.
    I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142.  After reading tons of probelms online about version 10.5
    I have decided to do nothing for now.  Seems people are putting hours into trying to fix it.  I was going to uninstall and reinstall but seems that isn;t working for to many people.
    How do we get some help from apple? 
    Anyone have any answers???  APPLE HELP please!!!!!!!!!!!!!!!

  • Found a possible solution for iTunes constantly reopening

    My iTunes kept reopening every time I closed it - like 20-30 times in a row, with me quitting, force quitting, etc., even as my force quit window was up. I would force quit the application but it's logo wouldn't disappear. Searching around on these forums I poked around a bit and figured out that when I hid my RAC (Red Alarm Clock widget, which works with itunes, though isn't constantly playing), I could quit without the icon popping right back up. So if you're having this problem you might try hiding (you don't have to delete it, just move it from the main dashboard) any widgets that work with iTunes.

    For a more systematic approach see Repair security permissions for iTunes for Windows.
    tt2

  • Solution for iTune connect : create à new Apple id just to use it.

    Hello,
    I have Now a special Apple id just for iTune connect, and Now i can put my books form iBooks Author on the applestore.

    If you have a  Free  or Paid book account  approved by the iBooks store,  yes  - you can create and  deliver your books to the iBooks store.

  • Finding new solution for Exchange Server

    We are a three-man operation and since 2007 have had an HP Proliant ML110 running Microsoft Windows Server 2003 for SBS SP2. I think it's time to replace the server but the prices of the hardware seem to have increased dramatically and I've had a quote for
    a new HP with Server 2010 and transferring everything across of over £4,000 which is ridiculous. I feel we've under-utilised many aspects of the programme for years. Really we just use it as a storage; to run Exchange for our (Outlook 2010) email; 'host' some
    shared software (notably a diary service) which enables us to all connect and edit; each laptop (3) is assigned a user name, etc which enables it to connect to the network.
    I've been trying to get my head round the Cloud, Exchange Online, Office 365 and I feel that there's a solution to be had within this area. But I'd love someone to confirm that and even begin the process of pointing me in the right direction of what I need
    to buy, pay per month, how easy to set-up, etc.
    Many thanks, Lawrence Kershaw

    Hi there,
    I would recommend to upgrade your server to Windows server 2012 Essentials, and use Office 365 for your email needs.  The way you have this currently setup, you are at a point where everything can be moved over in a few days, and have you up and running.
    Office 365 is between $4 and $20 a month, not sure how this relates to pounds.  Also,  if you choose the Small Business version, you get the newest Office software to use on up to 5 computers per user, meaning you can install Office on your home
    computers, as can the other two in your office.  
    Windows Server 2012 Essentials has a migration setting, where you can easily migrate all your current settings on your SBS 2003 to the 2012 server, making the transition seamless.  There are some great websites with instructions out there for this as
    well.  Also,  2012 Essentials easily integrates with Office 365, so you only have one password to remember for your email and computer use.  This is handy for people, as no one likes to have to remember multiple passwords to get the job done.
    If you have more questions, or I did not fully answer yours, please reply.  Hope this does help and sheds some light on what you are looking at.

Maybe you are looking for

  • To display Purchase doc no. in Freight GR/IR GL account

    Dear all, I have an issue . In GR/IR Freight Clearing GL account i have to display the Purchase doc no. In layout i have selected the Purchase Doc no. but not picking up from the table. In BSEG table only line item 001 have only Purchase Doc No. not

  • In Day view, how to jump to next month

    I've just updated to 10.7 and while there are so many things that annoy me about this iCal update, I'm going to try and focus on some very straightforward user interface options that were both solid and useful in 10.6 (and practically every other cal

  • Javascript:void(0) error after clicking buttons in my trips and expenses

    Hi All, I have implemented EHP2 and activated FIN_TRAVEL_1, now I am getting all the ABAP webdynpro iviews. BUT when i go to "my trips and expenses" and try to click any button there like; create travel request, plan, exit, etc... than I get the mess

  • BPM-Raise Exception does not work

    I have designed the BPM in following way. 1. Receive step - Receive Asynchronous message 2. Defined the Block - DB 3. Send step 'A'  to JDBC - inside the Block-'DB' - Acknowledgement-Transport, Exceptions System Error-DB, Receiver from-Send context.

  • No internet connection to server, even though I have internet connection

    Please help. I have been getting this error all day I thought it would be fixed by now but still 12 hours later still the same issue any ideas?  I have internet and im using it now even when I plug into my router directly. No Internet Connection to S