Recommended patches for solaris 10

I cant find the latest solaris 10 Recommended patches. I spending too much time looking for it.. without success
does any one can send me the link were to get it.. Thank-you

Hello,
Latest recommended patches are available through Oracle Support. If you have a valid account/support contract, you can login to http://support.oracle.com goto the "Patches" tab, and perform the following search:
Product: Solaris Operating System
Release: Solaris 10 Operating System
Description CONTAINS recommended
Remember to check the "Exclude superseded patches" to exclude the old ones.
HTH,
Marco

Similar Messages

Smpatch and Recommended Patches for Solaris 10

Hi,
Is there any way to make smpatch only retrieve recommended patches for Solaris 10 ?
I've seen several forum posts saying to use
smpatch set patchpro.patchset=recommended
but other posters indicate that this only works for Solaris 9 (additionally, it doesn't seem to work at all currently:
Failure: Cannot connect to retrieve recommended.zip: Not Found )
As far as I'm aware, Sun's patching policy is to apply the Recommended patches, as well as any that address specific issues you are having. This seems to contrast with the behaviour of smpatch which grabs all patches..

Hi.
Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
sunu45 = Sun Ultra45/Ultra25 Recommended
sftxk = Sun Fire T1000/T2000 Recommended
sfv2x5 = Sun Fire V215/245 Recommended
sfv445 = Sun Fire V445 Recommended
Mod.

Last kernel patch for Solaris 10 x86 screwed up my kernel

Hi,
The last kernel patch for Solaris 10 x86 (sorry I can�t remember the patch id, but the revision is 30), available from Sun Update Manager screwed up my system.
The system is still booting but in maintenance mode: smf can't start because of repository corrupted. Given instructions to restore the repository does not work because / filesystem is mounted read-only...
As I am not a solaris expert, I will reinstall it from CD. I hope I won't loose the filesystem.
I was used to blindly trust Sun solaris patches, that was a mistake.
Laurent.

i dont know why but still i do get default log in into the single mode
after startup
Requesting maintenance mode
(See /lib/svc/share/README for aditional information. )
Root password for system maintenance (control-d to bypass):i did removed the patch installed before so now
SunOS jorgito 5.10 Generic_118844-26 i86pc i386 i86pcand finaly i do have milestone like this
bash-3.00$ svcprop restarter | grep mile
options/milestone astring svc:/milestone/multi-user:default
dont know what to do else, also tried to synchronize boot-archive from solaris failsafe ...

[Answered] List of patches for Solaris 10 SPARC 64 bit!

Hi All,
Installation document for 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) does not mention anything about patches required on Solaris 10 (there is a list for Solaris 8 and 9).
http://download.oracle.com/docs/cd/B19306_01/install.102/b15690/pre_install.htm#sthref110
Can I safely assume that the installation of Solaris 10 contains all the required patches in this case?
Thanks,
Edited by: Satish Kandi on Nov 19, 2008 10:21 AM

Hi Satish,
I did not have access to ORACLE metalink so could not able check the doc which you reffered. But Checked the ORACLE installation doc, I suppose that is the required patches for 8 and 9 which you have to make sure of on Solaris 10.
Other wise wait and see for other inputs too.
Hemanth might reply back some thing.
- Pavan Kumar N

Latest patches for solaris 10 - sparc & x86

Hi,
Pls any to help me.
How can i know the latest patches is released by sun microsystem (solaris 10 - sparc & x86) ?
Thanks in Advance

Start here:
http://sunsolve.sun.com/show.do?target=patches/patch-access
and here:
http://sunsolve.sun.com/show.do?target=patchpage
You may need to sign up for a free SunSolve account.
You can download README files that show all the latest patches for latest versions, view individual patch information, etc. You need a subscription to download the full patch clusters, but you can download individual patches for free if they are security/bug fixes.

Creating a patch for Solaris?

Hi -
My company has an application that we ship as a Solaris package - ie, it's installed with Solaris's pkgadd command. I'm trying to write a patch for that app and would like to package the patch in a format usable by Solaris' patchadd command. Anyone know if there is documentation available on how to do this?
Thanks,
mike

Hi Mike,
The section on "Patching Packages" in Chapter 6 of the "Application Package Developer's Guide" would be helpful.
Below is the link to the section for the Solaris 10 doc:
http://docs.sun.com/app/docs/doc/817-0406/6mg76sth4?l=en&a=view
Hope this is going to be useful for you.
Have fun.
Regards
S.T.

Sun cluster patch for solaris 10 x86

I have Solaris 10 6/06 installed on x4100 box with 2 node clustering using Sun Cluster 3.1 8/05. I just want to know is there any latest patches available for the OS to prevent cluster related bugs. what are they? My kernel patch is 118855-19.
any inputs needed. let me know.

Well, I would run S10 updatemanager and get the latest patches that way.
Tim
---

10.2.0.3 Patch for solaris SPARC

Hi All,
We have 10.2.0.1 database running on Solaris Sparc.We are planning to upgrade to 10.2.0.3 directly instead of upgrading to 10.2.0.2
Do we have the patch 10.2.0.3 ready to dowload from the metalink..
If so please give me the patch number..
Thanks In Advance for the reply ASAP

Have not seen any fixed dates regarding the release of the 10.2.0.3 patchset. Searching Metalink showed some forum answers that suggest sometime in December 2006.

Patches for Solaris 9 with incompatible Packages

I have a Sun Sparc machine with Solaris 9 on it as oracle server. We added two patches (112233-11: SunOS 5.9:Kernel Patch and 111722-04: SunOS 5.9:MathLibrary(libm)patch). When I prepared the server for Oracle installation, I checked patch with command: $/usr/sbin/patchadd -p | grep <patch_number>. Then UNIX told me that these two patches have incompatible packages. 112233 got 12 incompatible packages and 111722 got 3 incompatible patches. My question is: does this incompatible packages affect Solaris 9 operation on the Sparc machine? How serious will it be? Thanks.

The syntax of ldapclient changed in Solaris 9 (at least by 9 12/03). You now specify it like this:
# ldapclient -v init -a profileName=cn=myProfile,ou=profile,dc=example,dc=comIf you're using Proxy Authentication add the following:
-a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com -a proxyPassword=ClearTextPWYou should have been able to create a profile (storing it in the DIT) when you ran idsconfig. If you took the default name of "default" (cn=default,ou=profile,dc=example,dc=com) you might not even have to specify the profile name to ldapclient.
To generate a new profile and store it in the DIT use:
$ ldapclient -vgenprofile -a profileName=cn=myProfile,ou=profile,dc=example,dc=com -a defaultSearchBase=dc=example,dc=com ...With your various attributes for your profile as specified in ldapclient(1M).
As for pam, you have to decide which you're going to use: pam_unix or pam_ldap. Note that the Solaris pam_ldap is very different from the PADL pam_ldap used under Linux and elsewhere (this makes it easy to find apparently conflicting advice).

TO ORACLE SUPPORT PEOPLE : Download 8.1.6.3 patch for Solaris and Windows NT

i'm unable to find the link to download the patch to upgrade from 8.1.6.0 to 8.1.6.3 for both NT and Solaris.
Please send me the link.
I found this link with the oracle patch Matrix. Not sure whether the contents are the latest.
http://otn.oracle.com/deploy/security/pdf/patch_avail.html
Please treat this as urgent.
Thanks,

If you go to http://metalink.oracle.com, patches & updates is one of the options in the navigation bar.
Justin

Recommended patches for 10G OLAP?

Hi,
Can anyone giude or suggest which patches one should install to view and use the latest OLAP suite features properly.
Currently I have installed the following :
1. 10G database 10.1.03
2. Patchset 4 for 10.1.03 (4074232)
I also plan to install 10G app server, then install the latest 9.2.1 Web Agent Patch (4194619) , to get web agent up and running.
Do I need to install any other patches? I tried installing 10.1.03B patch, but got a message saying it conflicts with patch 4074232.
At this stage I am looking to import Express 6.3.4 Databases, to upgrade an existing Web Agent App, (which I had successfully done at one stage using 9iR2, and also to investigate the use of compressed composites, on some of the existing cubes.
Thanks,
Imran Shah
Ioppolo & Associates

Since this is windows, you can only have the OLAP C patch
or the RDBMS patch installed. One will overwrite the
other since the OLAP patch is not part of the RDBMS
patch 4. If you want to use OLAP, I recommend installing
the C patch.

11gR2 Pre-requisite patch for Solaris

Hi,
I am refering to
Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC [ID 964976.1]
So that i can upgrade my database from 10g to 11g for R12 application.
But i have one question.
The patch 124861-15 is a must for Oracle applications right???
As this patch delivers related files for XDK.
If yes, how can i download and install 124861-15
Thanks

Hi Again;
Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC [ID 964976.1]
But i have one question.
The patch 124861-15 is a must for Oracle applications right???What # /usr/sbin/patchadd -p | grep 124861-15 return?
>
If yes, how can i download and install 124861-15Please see:
11gR2 installation on Solaris failed with prereuisite 124861-15
11gR2 installation on Solaris failed with prereuisite 124861-15
Regard
Helios

DST patch for Solaris 8

can't install the new patch 109809-06
the system replies that the patch already exists.
verifying the installed patch is 109809-01
my guess is that they both are the same although the revision is different.
what can we do for DST on March 11
this will affect the calendar and the cronjobs running
I need work around very quickly
Sue

Then you're asking in the wrong place, Sue.

What is the correct Patch for Oracle 11gR1 to be at Oracle 11.1.0.7 Solaris

What is the difference between the following types of patches for Solaris 10.0.9 64 bit? to be at 11.1.0.7 on Solaris 64bit OS version 10/9 ?
* RDBMS Server
* Oracle Database Family

Can't make it easy, for you shall then forget that easily.
To start with, you may try to understand the difference between
1) a patch and a patchset.
2) different flavours of patch - one-off, CPU, PSU
then the answer for your question shall be as clear as water (not the one from the oil sands tailing :) )
Good luck.
Cheers.

Kernel patch updation for solaris 10 x86

I have Solaris 10 06/06 installed on x86 machine which is using svm and clustered with another node. The kernel revision is 118855-19 from the uname -a output. I am looking for the kernel patch updation and I heard 118855-36 is the latest one. Shall I go ahead with this patch and what r the dependency patches for this.
If anyone done this please guide me..

Patch 118855-36 is the latest kernel patch for Solaris 10 on x86 and its dependencies are:
113000-01 117435-02 118344-14 119043-09 119255-14 121264-01 122035-01 123840-01 (or greater)
Whether you should go ahead and install the patch is up to you, if possible try it out on a test box first. For better advice on this matter, I would suggest posting in the Solaris 10 forum as this forum is for the Sun Update Connection, Patch Manager & PatchPro toolsets.

Recommended patches for solaris 10

Similar Messages

Maybe you are looking for