Recommended patches on oracle 10.2.0.4 RAC database and CRS

Hi,
This week I am planning to upgrade my oracle 10.2.0.2 RAC database oracle 10.2.0.4.
Also, I want to apply if any recommended patches we can apply on 10.2.0.4 database or on CRS 10.2.0.4
I searched in metalink, but in vain i didn't get any exact patches recommended on 10.2.0.4.
If you have any patch numbers that need to be applied on oracle 10.2.0.4 RAC database, please provide me.
Thanks,
Mahi

Check out MOS Doc 756671.1 - Oracle Recommended Patches -- Oracle Database
HTH
Srini

Similar Messages

How to drop oracle 10.2.0.4 rac database on RHEL5

Hi,
I am having oracle 10.2.0.4 rac database with ASM configuration on RHEL5. Every week/day i take rman level 0 / level 1 backups by using RMAN into disk. Now i would like to test those backups. For that i need to drop this existing database and restrore, recovery from those backups. My database is configured with asm that is having two disk groups.
DATA for storing data
FRA for archive logs
How can i drop the rac 10.2.0.4 database and restore & recovery database from RMAN backups with asm. Could any one send clean steps for this testing?
Thanks
Vamshi
Edited by: user12052260 on Jun 17, 2011 10:41 AM
Edited by: user12052260 on Jun 17, 2011 10:41 AM

I asked about instances. Before performing your steps is it mandatory to bring down all the oracle instances. Before droping this database how to deregister these services from clusterware? After recover the database how to register the database services with clusterware?if you want to register/de-register, you need to use SRVCTL in clusterware. commands to ADD/REMOVE from clusterware, refer this below note.
http://download.oracle.com/docs/cd/E14072_01/server.112/e10595/restart005.htm

How to start Oracle 10g RAC database and clusterware?

I have steps to stop the 10g RAC Database and clusterware but not sure about starting it.
I have heard executing
$crsctl stop crs --as root
on each node
will start the database,asm,nodeapps .Is that true?
or we have to do that step by step like we do in stopping the clusterware and database below
1.Stop the agent:
cd to $AGENT_HOME/corpng04.amhc.amhealthways.net/bin, then run: ./emctl stop agent
2.Stop the full database
$ oracle_home/bin/srvctl stop database -d db_name
3.Stop the ASM Instances on node1,node2
$ oracle_home/bin/srvctl stop asm -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
4.Stop the NodeApps :vip,listener,oms and gsd
$ oracle_home/bin/srvctl stop nodeapps -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
5.Stop the CRS cluster processes :those bloody 3 evmd,ocssd,crsd
$su - root
$CRS_home/bin/crsctl stop crs

Paul R @ NL wrote:
before is shutting down crs i tend to stop the instances and services via srvctl then stop crs via crsctl
just the way i do it. not saying it's the right way but it is the one i am comfortable with.Good -) If we stop CRS, but forgot shutdown oracle instances ... we'll see shutdown abort in alert log file(that mean instances are shutdowned abort).
We should shutdown instance before stop CRS anyway.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

Fresh Instalation of Oracle E-bussiness suite with RAC database

Hi,
Could you pls give me a high level overview steps for Fresh Installation of E-Bussines suite 11i/R12 with RAC database?
Thanks
John

RapidWiz does not have the feature of installing Oracle Apps 11i/R12 with RAC. Refer to the following links for more details about the installation steps.
11i (11.5.10.2+ virtual) Documentation Library
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
Release 12.0.4 Documentation Library
http://download.oracle.com/docs/cd/B40089_09/current/html/docset.html
For RAC configuration, depending on your application/database version, please refer to the following note (All relevant notes/documents for configuring 11i/R12 with 9i/10g/11g RAC database are listed in this note):
Note: 745759.1 - Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=745759.1

Oracle not available while creating RAC database

Hi,
I have got 2node Oracle 10gR2 RAC installed on solaris 10 and am using NFS for keeping clusterware and database files.
cluvfy with pre dbinst option ran successfully.
Now while creating RAC database through DBCA, I am getting Oracle not Available error message. No relevant message written in alert log.
Can you suggest me as to what to do to resolve the issue please.
Thanks in advance.

Do you see any kind of logs under $OH/cfgtool*/dbca/..may be it will help with some pointers. If that doesn't give any useful information, try to startup nomount the instance using a sample init.ora file to see if reports anything in the alert log.
Thanks
-Chandra

Patching 10.2.0.4.0 on RAC database

How to apply patchset 10.2.0.4.0 on base release 10.2.0.1.0 for RAC System in Linux ???
anyone having step by step installation guide, would be great help ...

as the Jose mentioned in reply, you need to follow the read me file which is part of patch itself.
It very much required to install the Patchset (10.2.0.4) on Oracle RAC 10.2.0.1.
But i will suggest please please do the lab practice before installing the Patchset in Live Installation.
-Sumit

Recommended Patches

Hello,
I have got a RAC with 11gR1 on linux 64bit with ASM. I applied a patchset 11.1.0.7 for CRS, ASM, and Database. I read about other small recommended and security patches via Metalink and Oracle Recommened Patches (Doc ID: 756671.1).
So I decided to apply following patches: 7829321, 5897089, 7272646 using OPatch utility to only Database Home (DB_1). I mean to apply other patches according to Oracle Recommended Patched doc, so my question is, should I apply patches to ASM instance, too ?
Thank you for answer,
Best Regards,
Jimmy

Hello,
I have got additional information about recommended patches for Oracle Database:
1. 8287931 - is for CRS_HOME and RDBMS_HOME.
2. 8461420 - is for CRS_HOME and ASM_HOME.
3. 8658581 - only for RDBMS_HOME, patch does not include any fixes for ASM_HOME.
4. After patching ours environment we should apply a CPU patch 8534338 for RDBMS_HOME and ASM_HOME.
I hope, this information will be helpful for someone.
Best regards,
Jimmy,

Applying security patch to Oracle 10G on Linux

Hello,
I'm new to Oracle DBA world, need to apply security patch to Oracle 10G on Linux server, any tips and notes would be appreciated.
thanks
Sam

Manish,
1. I have to upgrade the database version from 10.2.0.2 to 10.2.0.4 on Linux, Is there any proper documentation which will help me out?Please refer to the following document.
Note: 454750.1 - Oracle Apps Release 12 with Oracle Database 10.2.0 interoperability notes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454750.1
2. What are the types of oracle database patches? what is the proper procedure to apply those kind of patches to Oracle 10g on Linux?
Most of the patches in this upgrade are database patches (which should be applied using opatch). The main upgrade patch (Patch 6810189 - 10.2.0.4 patch set) should be applied using Oracle Universal Installer (runInstaller).
Always follow the steps in the patch README file before applying any patch.
Regards,
Hussein

Patch manager for sol9 missing some recommended patches

I just tried cross checking a machine that was completely up to date according to patch manager with the Sol 9 recommended patch set.
The recommended patch set included the following patches that patch manager doesnt appear to distribute.
114049, 111711, 111712, 119211.
I would have thought anything that was important enough to be included in the recommended patch set was worth distributing through patch manager.
In particular, 114049 and 119211 appear to have security implications.

Hi Robert,
This forum is for Sun update Connection problems on Solaris 10 only.
I cannot give you reply as to why Patch manager for sol9 missing is some recommended patches. I will email an internal email alias and try to find out.
Regards,
Scott

Uninstall Oracle 11gr2 RAC database in grid infrastructure

Hi all,
After several attempt to install my Oracle database RAC with grid infrastructure, i want now to do a fresh installation as i have attempted 3 times and now i have all the procedure on installing the database and RAC.
Actually i have installed it correctly but now i want to cleanup my server and remove all oracle installation directory and do a fresh installation.
My question is what is the procedure to uninstall an Oracle RAC database and Clusterware with grid infrastucture and cleanup oracle base installation.
The architecture is:
GRID and clusterware: Oracle grid 11gR2
Database: Oracle database 11gR2
Database and grid storage: ASM
OS: linux centos 6
Thank you.
Raluce.

The deinstallation of Oracle GI could be not so easy thing to do, because it contains many components one should be aware of. The proper deinstall is important because it will safe you from many issues with next install on these servers
In general we need to be sure that:
1. all sowftware stopped properly
2. removed from oraInventory
3. binaries removed
4. /etc/oracle cleared
5. ocr and votes cleared using dd
6. /etc/oratab updated
7. .profile updated
8. init.d files in /etc/ cleard
Usually its recommended to use deconfigure scripts, if they fails for some reason, the manual procedure should be followed.
How to Deconfigure/Reconfigure(Rebuild OCR) or Deinstall Grid Infrastructure [ID 1377349.1]
How to Deinstall Oracle Clusterware Home Manually [ID 1364419.1]
As general recommendation its good idea to save your crs configuration for future reference.
Regards
Ed Rudans
http://erudans.blogspot.com

Help: Oracle lite 10.3.0.1.0 and symbian 9 s60

Greetings,
I installed the oracle litle server, I have a client installed windows 32, and synchronizes works, the problem is when I want to install a client for symbian,
first how to enable the client for Oracle Lite Symbian OS v7 and OS v7/UIQ2.1 in mobile server, to make install from the client gives me an internal error (http://serverlite:8080/webtogo/admin/console/setup/),
download the patch from the metalink and downloads from oracle downloads area (the same, Oracle Database Lite 10g Release 2 (10.2.0.1.8) Mobile Client for Symbian 9 ), I installed olite_core.sis Successfully
and there is where I do not run in phone nokiea E61, and install msync other utilities on the phone nokia E61, but is not doing as synchronization
the question is:
-exist patch for oracle lite 10.3.0.1.0 and symbian 9 s60
-how to enable client for symbian 9 s60 in oracle lite server 10.3.0.1.0
-how to sync from client nokia E61i, with msync and others tool in the oracle lite server
-where install olite_epoc.zip (in the phone or the IDE developer and SDK nokia)
my plattform:
server: Windows XP and Oracle lite 10.3.0.1.0 Server
Client1: windows xp client windows 32
Clientn: Phone Nokia E61i with symbian 9 s60
Roy Ayala Galvis
java developer - mobile developer

Hi Roy,
For symbian 9 you have downloaded the correct binaries,there is no other patch for symbian.You should be able to sync symbian client database with 10.3.0.1 server.
Make sure that server is in the public network otherwise GPRS based synchronize does not work.
Use the example application user as s11u1 to get the syn examples working with mobile server.
Synchronization from E61i will also work , but dialogues messages in the UI will not displayed properly
Olite_epoc.zip should be installed in IDE/SDK, not in the phone .
Please read the documents for symbian in the meta-link.
If you have any question or doubts, please contact us (oracle lite team)
Arjun kumar
email id - [email protected]

Performace problem in oracle DB after Solaris 10 recommended patching

Dear All,
We are facing some performance problems in our oracle DB qerries and reports recently. We applied Solaris 10 recommended patchset on april 24th. Our monthly report generation acitivity is now running for last 3 days i.e may 11,12,13 and application team is complaining of degraded performance. I can see that the cpu usage on the server is about 100% during the report generation , but everything else is fine. Free memory is 15gb , all mountpoints are under 80% and there is no other hardware issue as well.
Now app team is suspecting that last month patching could be the cause of the problem, because till last month they were performing this activity without having a performance degradtion.
I just need to be sure that solaris 10 recommended patches are not causing this issue. Any of you ever faced such an issue after patch installation ?
The server is V490 with 8 cpu / 32gb RAM. Any hints will be appreciated ?
Thanks in Advance.
Edited by: 1005720 on May 13, 2013 9:58 PM

I did not archive the o/p of prstat but have o/p of top with me
195 processes: 175 sleeping, 13 running, 1 zombie, 6 on cpu
CPU states: 0.0% idle, 78.4% user, 21.6% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 16G free mem, 70G total swap, 70G free swap
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
18964 oracle 39 41 0 6389M 5488M cpu/1 2:50 15.04% oracle
19638 oracle 26 59 0 6390M 5490M run 0:27 8.58% oracle
19648 oracle 36 31 0 6418M 5516M run 0:21 5.92% oracle
19023 oracle 34 30 0 6398M 5498M run 0:37 5.88% oracle
7229 oracle 38 30 0 6427M 5514M run 234:24 5.69% oracle
6912 oracle 45 31 0 6395M 5483M cpu/16 218:04 5.31% oracle
7216 oracle 28 31 0 6430M 5517M run 232:40 5.04% oracle
19644 oracle 35 40 0 6390M 5490M cpu/17 0:24 4.74% oracle
6897 oracle 112 30 0 6392M 5479M run 236:38 4.52% oracle
3813 oracle 106 31 0 6428M 5528M run 100:11 4.43% oracle
18970 oracle 234 31 0 6398M 5499M cpu/0 1:45 4.15% oracle
19749 oracle 1 32 0 6386M 5486M run 0:00 4.05% oracle
19646 oracle 23 31 0 6405M 5505M run 0:25 3.61% oracle
18972 oracle 11 32 0 6398M 5497M run 2:18 3.61% oracle
7220 oracle 258 32 0 6468M 5555M cpu/3 113:13 3.56% oracle
During the entire issue there was no %iowait.

Patch 19030202: Oracle E-Business Suite Release 12.1.3+ Recommended Patch Collection 2 [RPC2]

Hello Team,
We are currently in R12.1.3 version and we have applied the below patch as an upgrade.
Patch 19030202: Oracle E-Business Suite Release 12.1.3+ Recommended Patch Collection 2 [RPC2]
After apply this patch we are losing the existing feature
-     Sorting secondary price list on price list form is not working at all
and the new feature on this patch
-     This patch will resolve the creation of Orphan records in OM Interface table, when a header record is deleted from Corrections screen
     But when i delete the data from correction screen still the line level data is on the table (it didn't delete the Orphan records)
Please let me know any body come across this issue and solution if you have.
Thanks,
Dhasa

Hi;
Thanks for information, this info also posted on Forum Home » E-Business Suite » Technology - LCM: R12 Install/Upgrade by Steven Chan
Regards
Helios

How to merge these patches EBS: R12.1 Oracle Financials Recommended Patches

Dear Experts,
Please note that we have implemented the following modules on E-Business Suit 11.5.10.2 .
SCM Modules:
1.     Inventory
2.     Purchasing
3.     Order Management
Finance Modules:
1.     General Ledger
2.     Fixed Assets
3.     Accounts Receivables
4.     Accounts Payables
5.     Cash Management
We have also upgraded our database from 9.2.0.6 to 11g R2 as per the latest metalink interoperablity notes. Currently our EBS Version on test Enviroment is 11.5.10.2 with 11g R2
please note that as per the metalink note id EBS: R12.1 Oracle Financials Recommended Patches [ID 954704.1], We are in process of analysing the patches.
Please let us know how to merge these patches and proceed with our R12.1 upgrade driver.
Please also let us know are there any steps which needs to be performed after the below steps.
Run the Accounting Health Check and resolve data issues (Note 416699.1)
Complete all Period Close Actions/Processes. Validate and account as much data as possible and make sure everything is transferred to GL.
Run your standard reconciliation and account balance reports after period close and resolve issues.
Run the Accounting Health Check again. Resolve all remaining data issues (Note 416699.1)
If upgrading to R12.0.x, apply Patch 7653100 (Note 557869.1)
If upgrading to R12.1.x, apply Patch 8773483:R12.FIN_PF.B (Note 880275.1)
Proceed with the next steps of the upgrade.
Your quick action in this regards will be highly appreciated.
Regards
Mohammed.

Mohammed,
I am not an expert although I have significant experience upgrading the database and applications from 11.5.10.2 to 12.1.1 and 12.1.3 in both test and production environments. The following are a few thoughts as you continue down the upgrade path:
Patch 8773483 will need to be installed in pre-install mode along with a number of other pre-install mode patches. If you haven't looked at the following note you will need to since it contains information you need:
Oracle Applications Release Notes, Release 12.1.1 [ID 798258.1]
Pay particular attention to the README.txt instructions for patch 9179588 since it wants you to merge other patches with it before applying.
Another note you need to be aware of, especially if you want reconcile past the 6 month window used for accrual write offs during the upgrade, is:
R12.0 and R12.1: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch [ID 604893.1]
Other good sources of information for financials are:
Impact of R12 Design in Procure To Pay Accounting Flow [ID 429105.1]
Projects Uptake of the TCA Architecture in Release 12 [ID 417511.1] <--- AR/TCA (HZ) table join information that is very good
Payments In Order Management In R12 [ID 1164613.1]
If you don't have XLE and ZX currently licensed in your 11.5.10.2 instance, you will need to license them so the tax conversion runs successfully.
If you have legal entity identifications that are more than 30 characters, you will want to be aware of the size limitation imposed on the column LEGAL_ENTITY_IDENTIFIER in the table XLE.XLE_ENTITY_PROFILES, The following job will fail if the combined values exceed the LEGAL_ENTITY_IDENTIFIER column length which is shortened in R12:
xleupg01.sql
There are lots of potential pitfalls in an R12 upgrade. You simply need to test, test, and test again everything you use, read the RCD's and R12 documentation as much as possible, etc ... Having said that, there are many good things about an R12 upgrade too, from both the functional and technical perspectives.
Riley

Recommended patches on oracle 10.2.0.4 RAC database and CRS

Similar Messages

Maybe you are looking for