Recommended procedure for SOLMAN_SETUP when CUA is Active

We have upgraded to Ehp1/SP20 in Solution Manager. As recommended, we want to use the guided procedure SOLMAN_SETUP to automatically generate the roles and userids required in the managed systems. DEV/BWD/PID etc. We use CUA and it is active in the managed systems so the Userids, Roles, Profiles etc are not in the managed system nor are they in the CUA parent client.
What is the recommended approach/Best Practice to configure Solution Manager with CUA active?
TIA

HI,
Please refer to the RCA- User Administration Guide.
This is under https://service.sap.com/diagnostics.
The guide contains all the details, including the scenario for CUA, closely follow the guide and make sure everything is in place for authorizations.
Hope this helps.
Feel free to revert for any issues.
Thanks,
Jagan

Similar Messages

General Recommended Procedures for Restarts in BI Apps ETL process

I have two question...
What are recommended procedures to follow if informatica abends occur in the ETL batch? For example, increasing the error count or copying the program to another folder and executing, then marking the step complete in DAC?
I had the error count increased and was going to restart the step. DAC documentation states to then update the status of the task to queued and restart the etl flow. Unfortunately, for some reason the etl flow won't start. Prior times I had just left as failed and restarted however this time I figured I would follow the documentation. so then I went in and marked the flow complete..now when I try to starta new one..nothing happens. has anyone seen this before?

in the past when restarting...due to a timeout error..we would always just go to current run and select start and it would restart...however the documentation for DAC says to update the status to queue (from failed) prior to restarting...so I did that. For some reason...with the status as queued..the flow would not execute....so based on documentation for failed run it says you can mark it as complete which is what we did...however that causes the last step to not execute..we were only 3 tasks from completion when this occured and I checked the PLP_ARsnapshot sessions and feel comfortable that we can not run those. If the end date of the last completed becomes the start date of the next run..then if I run the last session in the execution plan which marks complete, then our next run should grab the correct dates. I would NEVER take this approach if I new we were not 3 tasks from the bottom. However if we restart from the day we just got near completed..i would think I would have bigger issues.

Recommended approach for validating page content on activation?

Hi,
Is there a recommended approach to implementing validation in CQ5 (we are using 5.5) that will run when a Page is activated? I have been reading up on different approaches for this, but have not been able to find a clear solution.
The requirement that I have is for a News article to only be published if all of it's mandatory fields have been supplied - for example Heading, Image, Body Text, Author. Simply implementing validation on the edit dialog doesn't really solve the issue, as each component is editable separately, so it is easy for a content author to miss entering the Author for example.
What I'm trying to accomplish is to run some custom validation code when the page is replicated, and cancel the replication if the validation does not pass. Ideally this would show a "Validation Failed" or similar notification in the CQ user interface, the same way that the "Activation Successful" notification is shown.
The approaches that I have investigated so far are:
Replication Action Event Handler
http://helpx.adobe.com/cq/kb/ReplicationListener.html
- This triggers at the right time and provides sufficient information (path to page), but doesn't provide a mechanism to stop the replication.
- Potentially this could be combined with further service calls to stop replication?
Workflow Action Event Handler
http://dev.day.com/docs/en/cq/current/workflows/wf-extending.html#par_title_0
- This doesn't seem to fire when activating a page
Custom Replication Agent
http://dev.day.com/docs/en/cq/5-5/deploying/configuring_cq/replication.html
http://forums.adobe.com/message/4785913#4785913#4785913
- This would provide a hook for validation, but seems like massive overkill - is there no way to simply hook into the existing replication process and cancel it if the page is not valid?
Any advice on how to best accomplish this would be much appreciated.
Thanks,
Ray

Try replication preprocessor. http://wemcode.wemblog.com/replication-preprocessor
Yogesh

What is the recommended procedure for upgrading the OS?

I'm a creative cloud subscriber and am about to perform an upgrade from Win 7 to Win 8. Has this scenario been tested? Should I deactivate and/or uninstall my Adobe products before the upgrade, and then reinstall after? Will this be considered a 'new' computer, and cost me another install?
Let me know if there is any documentation available for 'best-practices' when upgrading an OS with Adobe products installed.
Thank you.

The only thing would be an adapter, for example World Travel Adapter Kit from the Apple Store.
The power supply will accept the 240V input in Europe.

HT1338 Do you have a recommended procedure for upgrading from os x 10.4 to 10.6? The machine is a MB with a 2Ghz Core 2 Duo.

What is the procedure to upgrade a MacBook 2GHz Core 2 Duo from Tiger (10.4.11) to Snow Leopard (10.6.6)? We have the new os and apps disks; wish to retain data files.

Back up the system, insert a retail DVD, double-click the installer, and follow the instructions. The retail DVD will be either 10.6 or 10.6.3; Mac OS X 10.6.6 DVDs can't be used to upgrade.
(77912)

What is the best practice and Microsoft best recommended procedure of placing "FSMO Roles on Primary Domain Controller (PDC) and Additional Domain Controller (ADC)"??

Hi,
I have Windows Server 2008 Enterprise and have
2 Domain Controllers in my Company:
Primary Domain Controller (PDC)
Additional Domain Controller (ADC)
My (PDC) was down due to Hardware failure, but somehow I got a chance to get it up and transferred
(5) FSMO Roles from (PDC) to (ADC).
Now my (PDC) is rectified and UP with same configurations and settings. (I did not install new OS or Domain Controller in existing PDC Server).
Finally I want it to move back the (FSMO Roles) from
(ADC) to (PDC) to get UP and operational my (PDC) as Primary.
(Before Disaster my PDC had 5 FSMO Roles).
Here I want to know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
In case if Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
Example like (FSMO Roles Distribution between both Servers) should be……. ???
Primary Domain Controller (PDC) Should contains:????
Schema Master
Domain Naming Master
Additional Domain Controller (ADC) Should contains:????
RID
PDC Emulator
Infrastructure Master
Please let me know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles.
I will be waiting for your valuable comments.
Regards,
Muhammad Daud

Here I want to know the best practice
and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
There is a good article I would like to share with you:http://oreilly.com/pub/a/windows/2004/06/15/fsmo.html
For me, I do not really see a need to have FSMO roles on multiple servers in your case. I would recommend making it simple and have a single DC holding all the FSMO roles.
In case if
Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
No. This is not true. Each FSMO role is unique and if a DC fails, FSMO roles will not be automatically transferred.
There is two approaches that can be followed when an FSMO roles holder is down:
If the DC can be recovered quickly then I would recommend taking no action
If the DC will be down for a long time or cannot be recovered then I would recommend that you size FSMO roles and do a metadata cleanup
Attention! For (2) the old FSMO holder should never be up and online again if the FSMO roles were sized. Otherwise, your AD may be facing huge impacts and side effects.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

With classification release procedure for PO

Dear Experts ,
here one issue is with classification release procedure for PO
when I create characteristics
in Additional data
table name :-- Cekko field name :-- match code
enter
click all sec charars then which block I select to go next screen
and fill name is right or ?
please help me

hi,
in additional data field you have to give the field name of characteristic you are maintaining. like if you want to maintain characteristic as document type of the PO then we have to give the field name for document type mentioned in table CEKKO i.e. BSART.
then you have to do the value assignment. here you have to tick the check box for "NOT READY FOR INPUT".
JASH

Approval Procedure for Sale Orders

Hi Experts:
Anyone can help me?...I´m needing an Approval Procedure for Sale Orders to be activated whenever the user is trying to give diferent discount percentage from the one assigned in the price list throughout Period Discounts. We have Sap Business One 2007A SP01 PL05
Thanks very much in advance
CLAUDIA

Hi CLAUDIA,
This has to be done through user query approval. However, since I don't have similar environment to try, you may start to create your own query first.
Thanks,
Gordon

Release procedure for PR quantity change

Hi...
I have set a release procedure for PR. when i try to change the PR system does not allow me to change the QUANTITY.
where to i set the changeblity indicator so that for a specified percentage system will retain the same release strategy.

Spro>MM>Pur>Purchase Requisition>Release Procedure>Procedure with Classification>Set Up Procedure with Classification>Release indicator
Here double click the Indicator and maintain the values in the fields
Changeabil.
Value Change
The field Changeabil have options of
    Changeable, new release in case of new strategy
1   Cannot be changed
2   Changeable, no new determination of strategy
3   Changeable, new release in case of new strategy
4   Changeable, new release in case of new strat. or val. change
and in the field Value Change
Pls maintain the Value in %

Stored Procedure behaves differently when activation is on?!

Hi,
I have got a simple stored procedure for testing purposes. When Activation is off and I run this sp myself it works correct, but when I set activation to on and send a message, the message is being pulled from the queue and I think this can only be done
by the activated sp but the insert into (see sp) is not done.
here is stored procedure:
as
declare
@message_bodyasxml;
declare
@message_typeassysname;
declare
@dialogasuniqueidentifier;
while
(1=1)
begin
waitfor
receivetop(1)
@message_type=message_type_name,
@message_body=cast(message_bodyasxml),
@dialog=conversation_handle
fromdbo.MADClaimCallHistoryQueue
),timeout2000;
if
(@@ROWCOUNT=0)
begin
print'rowcount
= 0'
break;
end
if
(@message_type='http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog')
endconversation@dialog;
elseif
(@message_type='http://schemas.microsoft.com/SQL/ServiceBroker/Error')
begin
print'Dialog
Error dialog #'+cast(@dialogasnvarchar(50));
endconversation@dialog;
end
elseif
(@message_type='InsertMessage')
begin
print'insert';
insertintoMADLog.dbo.SBTest(xmlvar)
select@message_body
endconversation@dialog;
end
end

the stored procedure is executed as SELF.

Hide fields for activities when they are opened via Activity Monitor

Hi,
In CRM 5.0, my requirement was to hide a number of fields from activity display via transaction CRMD_ORDER & CIC0 (SAPGUI based transactions). I achieved it by using screen variant. I assigned my screen variant to different transactions (CRMD_ORDER, CIC0 etc.), and things were working fine.
But when I open activity monitoring report (transaction S_AE2_89000019), search for some activities and open an activity by double-clicking in the report, the hidden fields become visible. Although, the transaction being displayed in CRMD_ORDER.
I couldn't enable my transaction variant for transaction S_AE2_89000019, obviously because this is a report transaction which in turn opens activity when we double-click on the grid.
Any idea how to avoid these hidden fields being displayed via S_AE2_89000019?
Regards,
Kaushal

Hey Kaushal,
Let me first inform you the following:
1) Transaction Variant are associatated to Dialog transactions only......Which means when u call report which eventually refers the same transaction even then the transaction variants is not called....
For the whole transaction variant to workout, you need CALL transaction " ..."....
2) The transaction S_AE2_89000019 is not a dialog transaction, its a parameter transaction which eventually calls a report AQZZ/SAPQUERY/SMCRM_REP_ACT1==
3)This report in turn uses the call to FM CRM_1O_CALL_FOREIGN which launches that crmd_order transaction screen and not crmd_order transaction..
You can enchance that report by creating a z report and inside that z report you can fulfill your requirement..
Inspire ppl by reqwarding..
Regards,
Anand...

Unable to launch Lumira when BO Analysis for Office add-in is active

Hi guys,
Has anyone else noticed that you don't seem to be able to launch Lumira when the BusinessObjects Analysis for Office add-in is active? Is it just me or is this a bug?
Thanks,
Stephen

I'm not. Where can I download this from as the free download is still 1.8. Thanks as alwasy. And p.s. do you ever sleep ?
Thanks,
Stephen

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

HT1657 If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?

If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?

You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work

Recommended procedure for SOLMAN_SETUP when CUA is Active

Similar Messages

Maybe you are looking for